Military Engineer Services Tender

(l) Inspection Cover : As Per Requirement (m) Conservator : 1 No. (n) Explosion Vent : 1 No. (o) Air Release Plug : 1 No. (p) Buchhloz Relay : 1 No. (q) OTI : 1 No. (r)Marshalling Box : 1 No. (s) Radiators : ONAN Cooling The following system should have manual/bypass arrangement, suitable for balanced supply and unbalanced load, minimum losses as per IS 2026/77 with voltage correction speed 80 to 85 V/sec,suitable for all power factors with ONAN Cooled oil immersed copper wound outdoor HT-AVR (on-load stepless rolling contact type) suitable with CRGO laminations M4 grade. Foundation Work : The civil and foundation work should be carried as per OEM general arrangements and as per IE Rules.Electrical terminal control and monitoring features as per specified by OEM and directed and specified by Engr-in-charge. Make : VINTEK(Brand Name :VOLINA) or equivalent

Excavating in trenches not exc 1.50 mtr wide and not exc 1.50 mtr in depth for taking out/laying of under ground cable, pole or stay and getting out in soft/loose soil, complete all as specified and as directed.

Returning filling in soft/loose soil, including, spreading, levelling, watering and well ramming in layers not exc. 25 cm complete all as specified and directed. NOTE : The top of filled trench shall be made proud by using the excavated soil to cater for subsequent settlement of soil.

Removing excavated materials (soils) not exc 50.00mtr and depositing where directed at a level not exc 1.50 mtr above the starting point in soil, complete all as specified and as directed.

Supply and filling for dry sand in cable protection trenches before and after the cables are laid, for sand cushioning to cables complete all as specified and directed. NOTE : thickness after punning of sand shall be (minimum as specified in SSR) measured and paid in this item.

Supplying and laying un-reinforced precast concrete cable cover, class HVP,type 1 with peak, size 300 mm x 180 mm x 40 mm complete all as specified.

Supply and laying, connecting, testing, commissioning HT UG cable XLPE Insulated,armoured, electric power cables (heavy duty) 11 KV grade conforming to IS 7098 with aluminium conductor multi-strand of cross-sectional area 240 Sqmm 3.0 Core laid in trenches / ducts/ inside protection pipe including cable glands, lugs and suitable size of MS saddle clips etc complete all as directed by Engr-In-Charge. Make: Polycab(ISI Marked)/ Finolex(ISI Marked)/ Havells (ISI Marked)/ Gloster (ISI Marked)/ KEI (ISI Marked) Note:-(a) Excavation, sand cushioning, bricks, GI Pipe laying shall be measured and paid separately.

Supply and fixing HT cable route indicator made out of standard cast iron body firmly mounted on angle iron of size 40mm x 40mm x 5mm 750mm long along HT cable trench including embedding of route indicator in PCC 1:2:4 type B-1 block of size 15cm x 15cm x 30cm deep, complete all as directed.

M & L for Earthing complete with Galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried in ground (earth pit not less than 2.25 Mtr deep below normal ground level with top edge of the plate not less than 1.5 Mtrs below normal ground level, connecting to the Galvanised iron earth lead 32 x 6 mm size by means of bolts, nuts check nuts and washers of galvanised iron and 32 x 6 mm dearth lead protection by provision of GI medium grade pipe 40 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20mm graded stone aggregate with 40mm thick cover of RCC (1:2:4) reinforced with XPM (wieght not less than 4gs/Sqm) and frame of angle iron 25mm x 25mm x 6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed on top edge of earth plate common salt and charcoal filling test point made out of 40mm x 8 mm FI with fixing arrangements, funnel, wire mesh and earth work in hard dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 Mtrs all as per electrical Plate No.3 of SSR1991 Part I and connecting to earth test point all as specified or indicated including testing on completion complete all as specified and directed. Note :- Item of earthing includes the cost of 7.5 Mtr long galvanised iron earth 4 mm dia/32 x 6 mm GI strip and protection pipe of 40mm dia GI medium grade. Extra lengths if required shall be provided by contractor with out any extra cost. (ii) The cost of excavation, earth work is included in the quoted rate.

Material and labour for cold shrinkable indoor type end termination jointing kit for HT 11000 Volts (Earthed) grade cable of 150 Sqmm to 240 Sqmm 3 core size complete with jointing material and accessories complete all as directed by Engineer-In-Charge. Make: M-Seal/ Cab-Seal/ Denson/ Raychem/ Birla 3M

Material and labour for outdoor type Cold shrinkable cable end termination jointing kit for HT 11000 Volts (Earthed) grade cable of 150 Sqmm to 240 Sqmm 3 core size complete with jointing material and accessories complete all as directed by Engineer-In-Charge. Make: M-Seal/ Cab-Seal/ Denson/ Raychem/ Birla 3M

Supply and fix for 150 mm bore tubes "light grade" galvanised with all fittings laid in trenches of complete all as specified and directed by Engineer-In-Charge. Note :- Excavation & earth work shall be measured and paid separately under respective items of this schedule. Make : Tata / Jindal Steel / Prakash/ Surya Roshni ltd

M&L PCC, type D2, (1:4:8, using 40mm graded stone aggregates) as in PCC/Road cutting /installation area and foundation of pole etc complete all as specified and as directed by Engr-in-Charge.

M&L for horizontal boring for 150mm bore GI pipe under road/pavement/hard standing at 0.9m to 1.5 m depth from top of road level and insert 150mm light grade GI for Laying XLPE UG Cable with all necessary fittings and without any damage of road/pavement/hard standing surface complete all as specified and directed. Note :- (i) Necessary earth work shall be carried out and the cost for the same shall be included in the rate quoted for this item.

Material and labour for Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members (Exc 4 Kg/Sqm) complete all as specified and directed

Preparation of new untreated steel and iron surfaces of any description over 10 cm in girth or width not otherwise described and applying two coats of synthetic enamel paint over one coat Red oxide zinc chrome primer etc complete all as specified and as directed by Engr-in-Charge. Make: Shalimar Paints (Superlac)/ Asian (Apcolite)/ Berger (Luxol)/ Jenson & Nicholson Paints Ltd (Brolac)/ Nerolac (Impression)

Supply and fix hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts;posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified.

M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through and including PVC rigid non metallic conduit (minimum 20mm bore size) and conduit accessories concealed in walls/ceiling/floors all as per IS, including 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H green colour cable as earth continuity conductor to common earth & connecting to earth dolly for the following :- (Note : The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces. )

One light point/fan point/bell point controlled by one, one way switch.

3 Pin 5 Amps socket outlet/switch socket outlet on independent board.

M & L for point wiring complete for 15 Amps socket outlet on independent board with 2.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through and including PVC rigid non metallic conduit (minimum 20mm bore size) and conduit accessories concealed in walls/ceiling/floors all as per IS including sunk type pressed steel terminal boxes (Heavy duty) with 3mm thick plastic laminated bakelite sheet top cover for mounting switches, sockets, including 2.5 Sq.mm multistranded copper conductor with green PVC FRLS-H insulated unsheathed earth continuity conductor to common earth & connecting to earth dolly. Notes : The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces.

Supply and fix Modular type Switch piano, flush type single pole one way 6 Amps 230V complete all as specified and directed. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix Modular socket 6 Amps, 2/3 pin combined 2 module with back plate 230 V complete all as specified and directed. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix Modular switch one way, 16 Amps 1 module, 230 V complete all as specified and directed. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix Modular socket 6A/16 - 2/3 pin combined 2 module with back plate 230 V complete all as specified and directed. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specifed and directed. Make:- Crompton / Bajaj/ Philips/ Havells/ Osram/ Wipro/ GE Note:- (a) LM-79 and LM-80 certificate from NABL accredited Lab shall be submitted for LED light fittings. (b) Warranty certificate shall be submitted for LED light fitting as per standered format for minium 50000 Hrs. (c) LED light fitting and drivers shall be of same make.

Supply and fix lamp Angular holder insulated body with back plate suitable for batten fittings all as specified. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix ceiling rose, 3 phase, phase/polycarbonate, isolated body complete all as specified and directed. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

M & L for point wiring complete for 15 Amps socket outlet on independent board with 4.0 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H cable drawn through and including PVC rigid non metallic conduit (minimum 20mm bore size) and conduit accessories concealed in walls/ceiling/floors all as per IS, including 4 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS-H green colour cable as earth continuity conductor to common earth & connecting to earth dolly. Notes : The rate quoted shall deemed to include for cutting chases for concealing PVC conduit and making good disturbed surfaces.

Disconnecting electrical connections of 1.5/2/3 Ton Split type Air Conditioners, storing refrigerant gas in compressor of outdoor unit, splitting indoor and outdoor units, re-installing both indoor and outdoor units at respective locations (new locations as directed), re-connecting refrigerant gas circulating copper tubes, charging of refrigerant gas (top up or complete new gas as directed), brazing of copper tubes wherever required or connecting with service valves in outdoor unit and in indoor unit with threaded cast copper alloy sockets , making electrical connections, testing and commissioning complete all as directed.

Material and labour concealed sub main wiring with single core PVC insulated 10.0 Sq mm multi stranded copper conductor FRLS cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia (ISI marked) with all conduit fitting and fixing accessories and continious earth wire of single core PVC insulated 10.0 Sq mm multi stranded copper conductor FRLS cable 1100 volts grade including taking down old unserviceable sub main wiring of any size and making good disturbed surfaces complete all as specified and as directed. Note:-Two single cable for phase and neutral,one single core green earth wire including one meter pvc conduit is measured as one unit. Make:Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

Supply and fix sheet metal enclosure for vertical TPN DB,s vertical type 415 V 4 way earth & neutral link, TPN double door IP-54 including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fixing MCCB 63 amps 4 pole adjustable thermal magmetic release and adjustable over load setting 0.8 - 1.0 x ln and adjustable short circuit setting 6 - 10 x ln and rupturing capacity 16 KA at 415 V AC , 50 Hz complete all as specified and directed Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fixing MCCB 100 amps 4 pole adjustable thermal magmetic release and adjustable over load setting 0.8 - 1.0 x ln and adjustable short circuit setting 6 - 10 x ln and rupturing capacity 16 KA at 415 V AC , 50 Hz complete all as specified and directed . Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and fix sheet metal enclosures for SPN DB,s 8 way with 200 amps rated bus bar, 240 Volts, double door, complete with IP 43 including necessary provision for inserting the DBs in wall by cutting the brick/ stone masonry etc. and making good of disturbed surface to match with existing colour of wall complete all as specified. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and Fix Miniature circuit breaker (MCBs) single pole, 240 Volts, 10 KA, 5 to 32 amps 'C' curve complete all as specified and directed. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Supply and Fix Miniature circuit breaker (MCBs) single pole and Neutral, 240 Volts, 10 KA, 32 Amps 'C' curve complete all as specified and directed. Make: ABB/ Siemens/ Schneider/ Legrand/ Hagger/ L&T/ GE Note: (a) Quoted rates shall be deemed for brick wall / concrete wall cutting and making good as per existing surfaces.

Material & Labour in replacement of Earthing complete with Copper earth plate electrode 60cmx60cmx3.15 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to copper earth strip of size 20 mmx3mm by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPM weight not less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 40mm x 40mmx3mm, excavation and earth work in any type of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 40mm bore from top edge of earth plate upto main distribution board complete all to as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board all as specified and testing on completion.

Material and labour for earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required20x3mm copper strip complete all as specified and directed.

Supply and fix Test point terminal block made of gun metal or phosphorous bronze size 75mm x 75mm x 25mm, drilled and screwed including 3 Nos, 8mm dia and 25mm long hex head screw complete, as in repair all as directed by Engineer in Charge.

Supply and Fix Air termination, single pointed, copper rod 12mm dia and 300mm long complete all as specified and as directed.

Demolition of Precast concrete block/ Brickwork or stone/boulder masonry, laid with cement morter complete all as directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified.

Taking down chowkhats or frame with shutters (without taking off shutters from frame) each exceeding 1.50 Sqm but not exceeding 4.00 Sqm each. Including hold fasts and PCC block all as specified.

Taking down Shutters of any description exceeding 1.0 sqm but not exceeding 2.0 sqm for each leaf all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.

Material and labour for for suspended false ceiling using grid 180 GSM (exposed ceiling suspension system ) of grid size 605 mm x 605 mm with main runner 38 mm x 24 mm and wall angle 24 mm x 24 mm using 4 mm thick High Pressure steel Non Asbestos Fibre Cement decorative Board in a grid of powder coated GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing positions for light fixtures, air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc. The main runners to be secured to structural soffits by hanger @ 1210 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450 mm from the adjacent wall, Flush fitting 1210 mm cross tee to be interlocked between main runners @ 605 mm c/c,so as to form 600 mm x 600 mm grid complete all as specified . Make: Everest/ Lafarge/ Armstrong

Material and labour for Precast cement concrete block masonry with solid block type C1,1:3:6 using 20 mm graded crushed stone aggregates exc. 10 cm in width and getting in cement mortar 1:6 complete all as specified.

Material and labour for 15 mm thick rendering on fair faces of brick or concrete surfaces in cement mortar 1:6 finshed even and smooth without using extra cement including taking down old plaster complete all as specified.

Material and labour for 15 mm thick rendering in cement mortar 1:4 in two layers (10 mm +5 mm) on external faces of brick wall or concrete surfaces, finished the surfaces even and smooth without using extra cement with using approved LWPC on second layer (5 mm) as per manufacturer instruction including taking down cement plaster complete all as specified and as directed by Engineer-In-Charge. Note: LWPC shall be measured and paid including this item

Material and labour for applying three coats of white wash on ceiling boards complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of ceiling and applying distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre of approved manufacturer of required shade and colour complete, as per manufacturer's specification. Two or more coats over a coat of putty complete all as directed. Make: Berger (Silk)/ Dulux (Velvet Touch)/ Shalimar Paints Ltd (Superlac Stay clean)/ Asian Paints Ltd, (Royal Aspira)/ Nerrolac Paints Ltd (Impression)

Material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS-15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43 litre/10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surfaces. Make: Berger (Silk)/ Dulux (Velvet Touch)/ Shalimar Paints Ltd (Superlac Stay clean)/ Asian Paints Ltd, (Royal Aspira)/ Nerrolac Paints Ltd (Impression)

Supply and fix 4 mm thick sheet glass ,ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified.

Supply and fix 4 mm thick figured glass, pin head type and glazing in square exceeding 0.50 sqm in each pane in aluminium joinery in each pane complete all as specified.

Material and labour for 7 to 8 mm thick joint free premium quality anti skid colour ceramic tiles size of each tiles should be 600 mm x 600 mm as in floors set and jointed and pointed in white or colour cement to match existing surfaces including 20 mm thick screed bed in cement mortar 1:4 complete all as specified. Make: Somani Ceramic Ltd/ Kajaria Ceramic Ltd/ Varmora Granito Pvt Ltd./ H&R Johnson India/ Orient Bell/ Nitco

Supply and fix pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Material and labour for fabrication & fixing of anodised aluminium window sliding type three track system with frame of weight not less than 1.67 kg/rm and sliding section for shutter frame all round with aluminium section of weight not less than 0.55 kg/rm including all necessary aluminium fitting , all three pannels and including 5.5 mm (min.) thick selected quality tinted glass and aluminium Deco Grill-104 as approved by GE fixed with stranded aluminium channel outside with and including handle, cleat, glazing clip, lock, dry set, rubber gasket etc complete all as specified & directed. Note:- (i) The quoted rate shall be inclusive of sheet glass, Deco grill etc. (ii) The pattern of three way track window shall be as per TD drg given in the list of drawing MAKE : (i) Anodised aluminium section : JINDAL/ HINDALCO/ INDALCO (ii) Glass : Saint Gobin/ Modi Guard/ TATA.

Material and labour for anodised aluminium door and chowkhats made out of hollow extruded aluminium section as mentioned below. Each door shall be provided with 02 Nos disc or D type aluminium handles, 02 Nos aluminium tower bolts 200 mm long, aluminium hinges 3 Nos 100mm long for each shutter, floor stopper, one brass mortice lock of six levers with key in duplicate and shall be regulated by provided double action hydraulic floor door spring/hydraulic door closer and including 5.5 mm thick tinted glass, rubber beading/gasket, anodised aluminium beading, screws complete in all respect all as directed by the Engineer-in-charge. (a) Chowkhat/frame : 101.6 mm x 44.45 mm x 1.5mm thick (b) Shutter top and bottom rail : 114.3 mm x 44.45 mm x 1.5 mm thick (c) Shutter middle rail : 83.5 mm x 44.45 mm x 1.5 mm thick (d) Shutter vertical/style : 83.5 mm x 44.45 mm x 1.5 mm thick MAKE : (i) Anodised aluminium section : JINDAL/ HINDALCO/ INDALCO (ii) Glass : Saint Gobin/ Modi Guard/ TATA.

M & L Reinforced cement concrete 1:1/2:3 nominal mix type A1 using 20 mm graded aggregate beams, cantilever, bressummers, lintels over 1.5 m span formwork and reinforcement shall be measured and paid under same item complete all as specified and directed .

Cutting holes in brick walls in stone walls exceeding half brick but not exceeding one brick built in cement mortar or in cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.

M & L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. confirming to Fe 410-W (Gde-E-250) quality A complete all as specified and directed.

Supply only Liquid water proofing compound ISI marked as approved complete all as specified and directed.

Material and labour for prepration new or previously untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified.