Military Engineer Services Tender

Material and labour for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or compressed air to remove all loose, dirt, etc. complete all as specified and directed.

Material and labour for applying evenly a priming / tack coat with bituminous primer @ 5 kg per 10 sqm using with paving bitumen (VG 10 Grade) all as specified and directed.

Material and labour for providing bituminous premixed carpet 40 mm consolidated thickness with 0.54 cum of stone chipping mixed with 29.20 Kg of binder (paving bitumen of grade VG-30) per 10 Sqm, mixed in automatic hot mix plant, rolled and compacted to required camber and gradient etc. complete all as specified and directed.

Material and labour for liquid seal coat using paving bitumen (VG 30 grade) @ 9.8 Kg per 10 Sqm, blinded with 6.3mm size of stone chipping @ 0.09 Cum per 10 Sqm and rolled with 8 to 10 tonne power roller to uniform fair surfaces complete all as specified and directed.

Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines stop line dashe arrow etc and the like not exceeding 10cm wide on road pavement with hot applied thermo plastic road marking paint of approved colour conforming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

Supply and fix in repair speed breaker of size 750mm x 250mm x 75mm made out of ABS material with two highly reflective reflectors moulded in PMMA materials welded with ABS plate through ultrasonic welding process fixed on to the speed breaker so the dust and water cannot touch reflectors inside and fixed complete all as specified and directed.

Supply and fixing in repair traffic convex safety mirror of 600mm dia having 130 degree of viewing angle made of polycarbonate material, brim and back holding plate is made of metal/ FRB alongwith pole mounted brackets and pole 50mm dia made of stainless steel frimly fixed to the ground by means of PCC 1:2:4 type B-2 (using 40mm graded stone aggregates) in foundation filling (size 50cm x 50cm x60cm) complete all as specified and directed.

Supply and fix in repair metal tubular delineator made out of ABS round fitted with 2 Nos 65 mm bore highly reflective reflectors made out of PMMA and mounted on 45/50mm bore mild steel pipe of 600mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1, (using 20mm graded stone aggregates) complete all as specified and directed.

Supply and fix in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striple reflector of model No. DA 972 fixed with and including MS stud of suitable size as per manufacturers instructions complete all as specified and directed.

Supply and fix in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 25mm with PAMA striple reflector of model No. DA 972 fixed with and including MS stud of suitable size as per manufacturers instructions complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B2 (using 40mm graded stone aggregates) as in foundation filling and mass concrete complete all as specified and directed.

Material and labour for 75mm thick PCC 1:4:8 type D-2, (using 40mm graded stone aggregates) as in sub base finished even and rough complete all as specified and directed.

Material and labour for sand filling under floor including watering and consolidation for laying of interlocking paver blocks complete all as specified and directed.

Material and labour for 80 mm thick coloured, machine pressed precast concrete rubber moulded interlocking paver block any shape and size confirming to IS 15658-2006, M-40 grade with grey cement and pigment complete all as specified and directed.

Manufacturing, supplying and fixing retro reflective Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, as specified and directed.

Manufacturing, supplying and fixing retro reflective Cautionary /warning sign boards of equilateral triangular shape having each side of 900 mm with support length of 3650 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specified and directed.