Military Engineer Services Tender

All as per item No.2.00 above but 5 Amp socket on same board with other switches.

All as per item No.2.00 above but One call Bell point controlled by one bell Push on independent Board

Material and labour concealed point wiring for one light point controlled by one, Two way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including suitable size PVC conduit and fittings of medium grade fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. ncluding cutting chases and making good the disturbed surfaces as per existing complete all as specified and directed.

Material and labour concealed point wiring for power point controlled by one, one way switch using 2.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FRLSH cables in and including 20 mm width or higher size PVCconduit and fittings of medium grade fitted with chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. including cutting chases and making good the disturbed surfaces as per existing complete all as specified and directed.

Supply and fixing concealed submain wiring for DBs/ Power Point, two single core ,4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire including taking down old unserviceable one complete all as specified and directed. Note: 2 run of 4sqmm cable+ 1 run of 4sqmm earthed cable+ 1 run of conduit shall be measured as 1 unit.

Supply and fixing conealed submain wiring for DBs/ Power Point, two single core ,2.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked) including 2.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire ncluding cutting chases and making good the disturbed surfaces as per existing including taking down old unserviceable one complete all as specified and directed. Note: 2 run of 2.5sqmm cable+ 1 run of 2.5sqmm earthed cable+ 1 run of conduit shall be measured as 1 unit.

Supply and fixing concealed submain wiring for DBs/ Power Point, two single core ,1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC conduit (ISI marked) including 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire ncluding cutting chases and making good the disturbed surfaces as per existing including taking down old unserviceable one complete all as specified and directed. Note: 2 run of 1.5sqmm cable+ 1 run of 1.5sqmm earthed cable+ 1 run of conduit shall be measured as 1 unit.

Supply and fixing modular switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular bell push 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular switch 2 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked complete all as specified and directed.

Supply and fixing modular switch socket sockets 6A 2/3 pin combined 3 module 230/250 Volts, 50 Hz , AC supply, ISI Marked complete all as specified and directed.

Supply and fixing modular switch socket sockets 6/16A 6 pin combined 3 module 230/250 Volts, 50 Hz , AC supply, ISI Marked complete all as specified and directed.

S & F Modular cover plate with frame & flush box of 8 modules complete all as specified and directed.

S & F Modular cover plate with frame & flush box of 6 modules complete all as specified and directed.

S & F Modular cover plate with frame & flush box of 4 modules complete all as specified and directed.

S & F Modular cover plate with frame& flush box of 3 modules complete all as specified and directed.

S & F Modular cover plate with frame & flush box of 2 modules complete all as specified and directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, including 20 mm casing caping PVC on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild galvanised sunken box/metal flush box made out of 1.6 mm thick galvanised sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including accessories including making good the disturbed surfaces as per existing for one light point controlled by one switch complete all as specified and directed.

All as per item No.21.00 above but One 3 pin 5 Amps socket out let points on independent board

All as per item No.21.00 above but 5 Amp socket on same board with other switches.

Material and labour point wiring for power point controlled by one, one way switch using 4 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLSH cables in and including 20 mm width or higher size PVC casing caping and fittings of medium grade fitted with chromium plated brass screws & washers and 4 sqmm nominal cross sectioanl area multistranded copper conductor FRLSH PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

Supply and fixing submain wiring for DBs/ Power Point, two single core ,1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing caping (ISI marked) including 1.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire including taking down old unserviceable one complete all as specified and directed. Note: 2 run of 1.5sqmm cable+ 1 run of 1.5sqmm earthed cable+ 1 run of PVC casing caping shall be measured as 1 unit.

Supply and fixing submain wiring for DBs/ Power Point, two single core ,2.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing caping (ISI marked) including 2.5 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire including taking down old unserviceable one complete all as specified and directed. Note: 2 run of 2.5sqmm cable+ 1 run of 2.5sqmm earthed cable+ 1 run of PVC casing caping shall be measured as 1 unit.

Supply and fixing submain wiring for DBs/ Power Point, two single core ,4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing caping (ISI marked) including 4 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire including taking down old unserviceable one complete all as specified and directed. Note: 2 run of 4sqmm cable+ 1 run of 4sqmm earthed cable+ 1 run of PVC casing caping shall be measured as 1 unit.

Supply and fixing submain wiring for DBs/ Power Point, two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade drawing in and including suitable size PVC casing caping (ISI marked) including 6 sqmm nominal cross sectional area multistranded copper conductor FRLSH cable, PVC insulated unsheathed 1100 Volts grade earth wire including taking down old unserviceable one complete all as specified and directed. Note: 2 run of 6sqmm cable+ 1 run of 6sqmm earthed cable+ 1 run of PVC casing caping shall be measured as 1 unit.

Supply and fix switch piano flush type, single pole , 5/6 Amps, one way complete all as specified and directed.

Supply and fix socket outlets 2 in 1, 3 pin, 5/6 Amps flush type 230/240 V complete all as specified and as directed.

Supply and fix switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed.

Supply and fix switch socket combination 5 in 1 , 6 pin , (5/16 Amps ) flush type controlled by one switch complete all as specified and directed.

Supply & fix ceiling rose surface bakelite 65 mm x 50 mm three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

Supply and fix Bell push, flush type, 5 amp complete all as specified and directed.

Supply and fix Call Bell, Ding Dong AC. 230 volts, single pole complete all as specified and directed.

Supply and fix in repair Bldg security light fittings 35 watts, minimumm system lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete with GI pipe dia 25mm with all accessories like clamps nut bolts etc. including connected with twin core twisted flexible copper conductor of suitable size including taking down old unserviceable one complete all as specified and directed.

Supply and fix 18 W LED light fitting wall mounted batten 4'ft , extruded aluminium housing, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection including taking down old unserviceable one complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable one complete all as specified and directed.

Supply and fixing Wall bracket decorative LED fitting with lamp 10 Watt complete with necessary connection complete all as specified and directed.

Supply & fix lamp holder, PVC/polycarbonate type with back plate straight or angular suitable for batten fittings complete all as specified and directed.

Supply and fix 9 Watt LED bulb including taking down old unserviceable one complete all as specified and directed.

Supply and fix Distribution board double door MCB TPN 4 way with IP 43 multiphase outgoing suitable for mounting 63 Amps MCB as incomer with Bus bars, Neutral links complete with all accessories including taking down old unserviceable one including MCBs complete all as specified and directed.

Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Single pole and neutral 240 V, 12 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact including taking down old unserviceable one including MCBs complete all as specified and directed.

Supply and fix MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs including necessary connection complete all as specified and directed.

Supply and fix MCB SPN 40 - 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed.

Supply and fix MCB TPN 63 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessary connection complete all as specified and directed.

Material and labour in repair for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust and salt in alternate layer all around the plate and bentonite powder, using GI wire 4 mm dia as earth lead electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth wire encased in and including 20 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with TMT bars 8mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as specified in electrical plate No. 3 of SSR Part I and testing on completion complete all as specified and directed.