Military Engineer Services Tender

Excavation in post holes not exc. 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete all as specified and as directded. in soft/loose soil.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directded..

M & L PCC 1:4:8 type C2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and as directded.

S & F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting etc., and similar work conforming to Fe-290 Gde E-165 complete, all as specified .

MS work for screws bolts (Machine made) with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with wasahers and square nut, exc. 5 cm and n. exc. 10 cm long diameter of shank 11 to 15 mm complete all as specified and directed.

Supply only chain link MS galvanisd fencing, any size or type complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed by Engr-In-Charge

Round bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified and directed.

M & L for PCC 1:2:4 type B1 (Using 20 mm graded aggr) Ditto, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones ,bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed

M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directded.

M&L Rendering 15 mm thick on concrete surface of wall in CM (1:6) and finished the surface fair & even without using extra cement , complete all as specified and as directed

M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains all as specified & directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms,moulds,mitred/ stop ends complete all as specified and as directded.

M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primercomplete all as specified and as directded.

M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete

M&L for galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified and as directded each line wire to be measured)

M&L for preparation of new steel surfaces of any description , over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat red oxide primer all as specified.

M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete all as specified and as directed.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified

M&L for RCC nominal mix (1:1.5:3) (20mm graded aggregate) Columns, pillars, piers, posts and struts complete all as specified

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified

M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directded.

M&L for Mild steel TMT bars but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and as directded.

M& for 18/20mm thick of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including dismantling od existing slab complete all as specified and as directded.

M&L for Virified Ceramic tiles dark shade (Paving) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and as directded..

S&F for Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directded. Gde Fe -290

Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp, suitable size bracket, nuts, bolts, washers, clamps with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply, laying & testing cable XLPE insulated PVC inner sheathed, armoured with galvanized steel strip or wire heavy duty underground with stranded aluminum conductor 10 sqmm 4 Core 1100 Volts grade laid in trenches / duct passing through pipe / duct or fixed on pole and connecting and testing complete all as specified and directed.

Supply and fixing factory made IP-65 (Dust and power jet Proof according to IEC 60529) opaque street light junction box of size 260 mm x 210 mm x 116mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated made of halogen and silica free recyclable material, UV resistant having high grade gasket made of polyurethane with copper terminal , MCB SP 6 Amps rating 10 KA with locking arrangement and 2 Nos M40 size cable gland and one M32 size gland suitable up to 35 Sqmm cable etc complete all as specified and directed. Make : HENSEL Cat No K-8350 or equivalent in Sintex .

Supply and fixing PVC Insulated and sheathed three core Heavy duty cables 1100 volts 03 core having multi stranded aluminium conductor service cable size 4 sqmm complete all as specified and directed.

Supply and fix steel tubular swaged poles type 410 SP-31(9.0 meter long) Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as complete all as specified and as directded..

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 32 x 6 mm GI Strip by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 40 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

Excavation in trenches n exc 1.5 mtr wide and depth exc 1.5 mtr deep but not exc 3 mtr for foundation, laying GI pipes and UG cables etc in soft/loose soil and getting out complete all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed.

M & L for providing dry river sand as in sand cushioning to UG cable including punning gently complete all as specified and directed.

Removing excavated material not exc 50 mtr and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M & L Sub class'B' old size well burnt brick laid flat in trenches as protection to LT cable complete all as specified and as directed.

Supply and fixing GI Tube light grade of size 40 mm with all fittings and fixed complete to walls, poles and ceiling or laid in floor for cable crossing complete all as specified and as directded.

M & L for cement concrete (1:3:6) type C-1 using 40 mm graded stone aggregate as in necessary foundation work and finishing exposed faces of concrete even and smooth without extra cement all as specified and directed.

M & L for cement concrete (1:2:4) type B1 using 20 mm graded stone aggregate as in path/pedastal of pole /coping and finishing exposed faces of concrete even and smooth without extra cement all as specified and directed.