Military Engineer Services Tender

One light/ fan point/ call bell controlled by one, one way switch

Supply and fix Switch piano, flush type single pole one way 6 Amps 240V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix ceiling rose surface baklite with three terminals 240 V. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply and fix 5 star rating 3.00 ltr capacity electric water heater, instant type steel body with copper inner tank and heating element upto 2.0/ 3.0 KW with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as per manufacturer instruction. Make: Jaquar & Company Pvt Ltd/ Usha/ Ao-Smith

Supply and fix as in repairs 15 mm dia cast copper alloy chromium plated Angle valves, with wall flange concealed type screwed down for iron pipe of for unions complete all as specified and directed. Make :- Parryware Cat No T3907A1/ Cera Cat No F1016201/ Johnson Cat No T5310C

Material and labour for point wiring (surface type) with 4.00 Sqmm PVC insulated (FRLSH) unsheathed copper cable multistranded conductor 1100 volts grade controlled by one way switch including 4.00 sqmm PVC (FRLSH) insulated unsheathed copper cable multistrand conductor 1100 volts grade for continuity earth wire connected to common earth dolly drawn through and including PVC casing caping with all accessories and sunk cast pressed steel terminal box made out of MS sheet of 1.6 mm thick for mounting of fittings like switch, socket and fan regulator with3mm thick hylum laminated/bakalite sheet cover complete all as specified for the following :- Note:- (a) Red coloured cable shall be used for live connection, black coloured cable shall be used for neutral connection and green coloured cable shall be used for earthing. Separate cable for earthing and neutral to be used for each individual circuit from the distribution board. (b) Quoted rates shall be deemed for 'N' capping and box of suitable module. Make: Finolex(ISI Marked)/ Polycab(ISI Marked)/ Nicco (ISI Marked)/ Havells (ISI Marked)/ RR Cable(ISI Marked)/ KEI (ISI Marked)

One 3 pin socket outlet, 15 amps, independent board

Supply and fix 10 Amp, 240 Volt single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB suitable for 2.0/ 3.0 KW geyser complete all as specified. Make: L&T/ Legrand/ Havells/ Anchor/ Schneider/ Hager

Supply, lay and fix 15 mm bore galvanized iron water tubing medium grade including all fittings and fixed complete to walls and ceiling or laid in floors all as specified. Make:-TATA/ JINDAL/ PRAKASH

Supply and fix 15 mm dia cast copper alloy chromium plated two way Bib cock with wall flange concealed type screwed down for iron pipe or for unions complete all as Per manufacturer instruction. Make :- Parryware Cat No G2381A1/ Cera Cat No F1016163/ Johnson Cat No T3370C

Excavating in post holes (or similar holes) each not exceeding 0.5 cum and getting out soft or loose soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as directed.

Material and labour for PCC 1:2:4 type B2 using 40 mm graded crushed stone aggregates as in Foundation, filling and mass concrete complete all as specified.

Supply and fix rolled mild steel section for stairs (framed) including stringers, treades, landing, balusters, hand rails etc. in cluding cleats, brackets, etc. confirming to Fe 410 -W (Gde E- 250) quality A complete all as specified.

Supply and fix plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 410-W (Gde E- 250) quality A complete all as specified.

Material and labour for preparation of new and previously untreated steel or iron surfaces of any description, not otherwise described exceeding 10 cm width or girth and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified.

Material and labour for preparation of new and previously untreated steel or iron surfaces of any description, not otherwise described not exceeding 10 cm in width or girth when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified.

Supply and fix 20 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10 cm but not exceeding 15 cm long complete all as specified.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required superficial area exceeding 150 sqcm but not exceeding 400 sqcm complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed by Engineer-In-Charge.