Military Engineer Services Tender

M&L for premix bituminous macadam (consolidated thickness 75 mm or less) using 4% binder (paving bitumen VG-10) content by weight of total mix for repairs to road edges, in filling depressions, for filling pot holes, laid, rolled and compacted to required gradient and camber using 8 to 12 tonne power roller or for formation of speed breakers in shape as directed and compacted using 8 to 12 tonne power roller complete all as specified and directed.

MM & L for preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all dirt etc and applying evenly a priming/tack coat of paving bitumen VG-10 @ 10 kg per 10 sqm and laying bituminous premix carpet 40mm consolidated thickness with 0.54 Cum of stone chipping mixed with 29.20 Kg of binder (Paving bitumen VG-10) per 10 Sqm, rolled and consolidated with power roller exc 8 tonne but not exc 12 tonne capacity to required camber and gradient and sealed with liquid seal coat consisting and applied with binder (paving bitumen VG-10) @ 9.8 kg per 10 sqm and blinded with 6.3 mm sizestone chipping @ 0.09 cum per 10 sqm of stone chippings and rolled and consolidated with power roller exc 8 tonne but not exc 12 tonne capacity complete all as specified and directed.

M & L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat of paving bitumen VG-10 @ 5 kg per 10 Sqm and laying bituminous premix carpet 30mm consolidated thickness with 0.405 Cum of stone chipping mixed with 21.90 Kg of binder (Paving bitumen VG-10) per 10 Sqm, rolled and consolidated with power roller exc 8 tonne but not exc 12 tonne capacity to required camber and gradient and sealed with liquid seal coat consisting and applied with binder (paving bitumen VG-10) @ 9.8 kg per 10 sqm and blinded with 6.3 mm sizestone chipping @ 0.09 cum per 10 sqm of stone chippings and rolled and consolidated with power roller exc 8 tonne but not exc 12 tonne capacity complete all as specified and directed..

M & L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in floors/hard standing/ramp/foot path laid in panels of sizes as directed finished fair and even complete all as specified and directed.

M & L for 60mm thick PVC moulded precast interlocking paving blocks factory casted using grey cement and pigment, casted in an automatic plant working on vibration and simultaneous hydraulic compression from top, confirming to IS-15658-2006 and of shape haxagon/ triangular/ zigzag/ I-shaped etc. as directed having compressive strength not less than 350 Kg/ Sqcm laid over and including 25 to 30mm thick layer of sand cushioning including filling the interstices with & including sand and interstices on edges filled with PCC 1:2:4 type B-1 finished even and smooth without using extra cement complete all as directed.

M & L for cleaning and preparing road surfaces and applying 2mm thick reflective thermoplastic white or golden yellow road marking paint conforming to BIS-3262 by incorporating the white glass beads for reflectivity, laid through automatic mechanical road marking machine in a layer of CRYSTALEX for lines, dashes, arrows, Zebra marking etc in required width all as specified and as directed.

S & F in replacement ABS Engineering plastic stud (Cat Eye) of size 100mm x 90mm x 18mm thick, dynamically designed having high impact strength and fitted with 2 Nos. highly reflective reflectors on both sides iand fixed using epoxy resin adhesive (hardner) as per manufacturer's instructions and as directed. Make : DARK EYE / 3M/ M/S Texla Plastic & Metals Pvt Ltd./ M/S Sun Eyez/M/S MB Engineering corporation/M/S Automat Road safety Pvt. Ltd

S & F in replacement delineator consisting of two Nos high performance 100 mm dia reflection and two Nos rectangular reflection of size 70x23mm and identically fixed on both sides of guide post. The body of guide post moulded in ABS plastic and fixed on powder coated steel pipe of not less than 800mm height. The weight of delineator shall not be less than 1780 gms including embedding of delineator in PCC (1:2:4) block of size not less than 30x30x30cm complete including use and waste of formwork as required all as specified and as directed. Model/Make :- Model No. DA-74 of DARK EYE or equivalent product of MIS International wire product/MIS Surya Enterprises/M/S Automat road safety Pvt Ltd/ M/S TATA BP/M/S Sun Eyez.