Military Engineer Services Tender

M&L for Green Marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including jointed pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, complete all as specified and as directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.11 sqm but n exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed.

M&L for joint free non-skid coloured ceramic tiles 7 to 8 mm thick, area of each tile exc. 0.11 sqm but n exc 0.38 sqm, in dado/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match match the shade of tile, complete all as specified and directed.

M&L for Coloured non skid ceramic tiles 7 to 8 mm thick, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match the shade of tile, complete all as specified and as directed.

M&L for glazed ceramic coloured /printed tiles 350x250x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tileon verticle surface of wall, complete all as specified and as directed.

M&L for Virified Ceramic tiles Light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed

M&L for Virified Ceramic tiles Light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skiting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for removal of debries to a distance not exc 50m as directed by Engineer in charge and making site clean, complete all as specified and directed.

M&L for 25mm thick PCC type B-0, 1:2:4 (12.5mm graded aggregate) as in leveling course, complete all as specified and as directed.

M&L for screed bed or bedding laying of cement mortar (1:4) 20 mm thick for as in floor finishes, complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed.

M&L screed bed or bedding laying of cement mortar (1:6) 15 mm thick for as in floor finishes, complete all as specified and as directed.

M&L for rendering in cement mortar 1:4 10 mm thick on brick work /concerte surfaces finished even and fair, complete all as specified and as directed.

Taking down Wall panelling and similar work all as specified and directed.

S&F Hollow PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on GI frame as per specifications as per direction of Engr-in-charge.

Dismantling AC/CGI/PPGI corrugated or semi corrugated sheets in wall cladding or roof coverings and hanger doors including ridges and make good for aluminium earthing strips after fixing of sheets, complete all as specified and directed.

Fixing only plain or corrugated sheet of any guage or thickness as obtained from dismantling vide here-in-above item and shall be fixed with 'L' or 'J' type hooks or cranked hook bolts or shelf tapping screw as in roof, complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating PPGL based corrugated / trapezoidal steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating PPGL based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, eave board, fixed with self tapping screws, complete all as specified and directed.

M&L for Providing and fixing false ceiling of designer tile ivory painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm thick sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width, including taking down old false ceiling board of any description alongwith rails and connecting items all complete at all heights, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not therwise provided for, complete all as specified and directed.

S & F for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; complete all as specified and directed.

Schedule of Credit