Military Engineer Services Tender
View complete overview of Meghalaya MES Tender
Costs
EMD
₹ 64,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_652778_1Bid Award Id
ViewTender No
8830Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Material and labour for coloured Glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick rendering in CM 1:4, complete all as specified and directed
230
-
-
Taking down chowkats or frames exc 1.50 sqm but n.exc 4.00 sqm with shutters (without taking off shutters from the frame), complete all as specified and directed
4
-
-
Taking down chowkats or frames n. exc 1.50 sqm with shutters (without taking off shutters from the frame), complete all as specified and directed
86
-
-
Material & labour 2nd class hard wood, plain, solid straight chowkats and frames worught, framed, rebated on the solid rounded of chamferred, put together with glue, pinned at joints supplied and fitted, complete all as specified and directed
0.2
-
-
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixed as per manufacturer instructions, complete all as specified and directed.
107.8
-
-
Supply and fixing 35 mm thick Flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.
6.5
-
-
S&F Factory made solid PVC moulded door shutter 28 to 30mm thick (stiles), with 2,4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm PVC sheet on back face, fixing in frame at site as per specification & drawing, complete all as specified and directed
25.5
-
-
Supply and fix aluminium anodised (minimum thickness of powder coating 50 micron) Three track sliding window frame with shutters with ( 2 nos glazed and one wire gauzed shutter)including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 5 mm thick tinted glass to aluminium frame work using rubber gasket and including stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc including aluminium grill of thickness 5mm and opening not exceeding 75mmx75mm etc completee with the following section of frame and shutter (A) Sections for shutter (i) 'H' section 39 x 20 x 1.50 mm thick (ii) 'Interlock' section 39 x 20 x 1.50 mm thick (iii) 'Edge & Bottom' section 41 x 20 x 1.50 mm thick (B) Section for frame (i) Top & Sides 92 X 29.50X 1.50mm thick (ii) Bottom 92 X 29.70 X 1.50mm thick complete all as specified and directed .
20
-
-
Supply and fix aluminium anodised (minimum thickness of powder coating 50 micron) Ventilator frame with Shutter(bottom Half Portion Fixed and top half portion with louver) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. complete and glazing with and including 4 mm thick frosted glass to aluminium frame work and louver using rubber gasket and fixed with stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm outside vent with staple and suitable wall angle of size 25.4x25.40x1.1mm thick and fillets with screws and washers etc including Deco Grill of Model / Design No. DG 104 and 6.3mm thick etc (A) Section for frame 63.5 X 38.1X 1.40mm thick, complete all as specified and as directed.
16
-
-
Material & labour preparation of new wooden surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed
15.6
-
-
S&F aluminium alloy handles size 150mm fabricated type anodised, complete all as specified and directed
10
-
-
S&F aluminium anodised barrel tower bolt 150mm size of extruded section and fixed, complete all as specified and directed
10
-
-
S&F aluminium alloy handles size 100mm fabricated type anodised, complete all as specified and directed
44
-
-
S&F aluminium anodised barrel tower bolt 100mm size of extruded section and fixed, complete all as specified and directed
44
-
-
S&F 300 mm long aliminium alloy ,anodised sliding door bolt with hasp and staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections of cast alunimium alloy and fixed, complete all as specified and directed
4
-
-
S&F 100 mm butt hinges medium weight cold rolled mild steel and fixed, complete all as specified and directed
87
-
-
Material & labour flat iron mild steel for hold fast size conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed
6
-
-
Material & labour PCC 1:2:4, type B0 (12.5mm graded stone aggregate.) for fixing hold fasts, angle etc, complete all as specified and directed
0.05
-
-
Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removal to store, complete all as specified and directed
100
-
-
Taking up or down steel tubing 20mm bore and connections including cleaning for refixing or removal to store, complete all as specified and directed
80
-
-
S&F CPVC pipes 20 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc, complete all as specified and directed
116
-
-
S&F CPVC pipes 25 mm outer diameter of SDR 11 & plain CPVC SDR 11 and fittings as in walls, ceiling, floor, etc, complete all as specified and directed
104
-
-
S&F in repair 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick commercial ply wood and fixed to wooden plugs with chromiun plated brass screw and cup washers, complete all as specified and directed
8
-
-
S&F in repair PVC valve less syphonic action flushing cistern type 9 to 10 ltrs capacity with inlet, ball valve, float and handle including bracket, white colour, complete all as specified and directed
24
-
-
Supply and fixed in repairs of vitreous china squatting pan of Orissa pattern size 580 mmx440mm white with P or S tap front or back inlet and integral foot rest (Excluding flushing cistern and flush pipe), complete all as specified and directed.
18
-
-
S&F in repair wash hand basin, white flat back of size 550 x 400mm excluding piller taps but including waste cupling, waste pipe and bracket etc, complete all as specified and directed.
8
-
-
S&F in repair vitreous china wash down water closet (pedestal pattern) white with 'P' or 'S' trap front or back inlet, complete all as specified and directed.
6
-
-
M&L for Green Marble 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble over and including 15mm thick screed bed/bedding layer in CM 1:4, complete all as specified and directed
5
-
-
Material and labour for 15 mm thick rendering in cement mortar (1:6) on fair faces of brick surfaces finished even and smooth without using extra cement, complete all as specified and directed
50
-
-
Material and labour for rendering 15mm thick in cement mortar 1:4 on fair faces of brick masonry or concrete surfaces of walls, chajja, fins, facia etc upto 3 storey height mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement, complete all as specified and directed Note :-
(a) Supply only water proofing compound shall be measured and paid separately under relevant items.
(b) Cost of scafolding upto 3 storied height of building for rendering is deemed included in quoted rate this item.
(c) Rendering will be done in two layers. 1st layer will be 10 mm thick and 2nd layer will be 5 mm thick mixed with WPC. .
100
-
-
Supply only Liquid water proofing compound.
2.5
-
-
Material and labour for 5 mm thick rendering in cement mortar (1:3) on concrete surface as in ceiling/chajja finished even and smooth without using extra cement, complete all as specified and directed
70
-
-
Material and labour for applying three coats of white wash on ceiling including preparation of new or previously untreated surfaces, complete all as specified and directed
70
-
-
Taking down soil pipe/ rainwater pipes (any size or pattern ) including all fitings heads shoes bends swan necks etc (measured over all fixed along the centre line over fitting and (accessories), complete all as specified and directed
50
-
-
S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including scafolding etc, complete all as specified and directed
50
-
-
S&F for 110mm dia pvc bend etc with access door fixed with rubbr ring fixed to wall including scafolding, complete all as specified and directed
12
-
-
S&F for 110mm dia PVC (SWR) branch piece,single (single Y) equal or unequal with access door including scafolding, complete all as specified and directed
10
-
-
S&F for 110mm dia PVC (SWR) junction single,(Single T) equal or unequal with access door including scafolding, complete all as specified and directed
6
-
-
M&L for 100mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, including making good distrubd area/surfaces with cement concrete/cement mortar 1:2:4 etc including taking down old unserviceable Nahani/Floor trap, complete all as specified and directed
12
-
-
S&F in repairs 15 dia fancy type chromium plated Bib tap cast copper alloy etc, complete all as specified and directed
44
-
-
S&F in repairs of stop valve 15 mm dia CP fancy type, with long shank and cup (concealed type) cast copper alloy, screwed both ends for iron pipe or for unions, complete all as specified and directed.
20
-
-
S&F in repairs of stop valve 15 mm dia CP fancy type, with long shank and cup cast copper alloy, screwed both ends for iron pipe or for unions, complete all as specified and directed.
24
-
-
S&F in repairs 15 mm dia fancy type pillar tap cast copper alloy, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete all as specified and directed.
8
-
-
S&F in repairs Shower Rose 125mm size Chromium plated with swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed.
20
-
-
S&F in repairs Brass chromium plated tubelar towel rail, 20mm dia, D type, 60,cm long between flanges, complete all as specified and directed.
8
-
-
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls etc, complete all as specified and directed.
80
-
-
M&L for preparation of new plastered surfaces and applying two coats of oil emulsion distemper (any colour/tint) over a coat of primer on wall surfaces including rubbing with emmery paper to make wall surface smooth and even, complete all as specified and directed.
50
-
-
M&L for complete removal of existing finishes and treating with two coats of oil emulsion distemper (any colour/tint) over a coat of primer including rubbing with emmery paper to make wall surface smooth and even complete all as directed and specified.
150
-
-
Material & Labour for preparation of new plastered surface of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and as directed.
100
-
-
Material & labour for preparation of old plastered surface of wall and applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces, complete all as specified and as directed.
180
-
-
M&L for preparation of old plastered ceiling surfaces and applying two coat of white wash (any colour/tint) on ceiling surfaces, complete all as specified and directed.
50
-
-
Demolition of cement concrete of any dsecription and in any position not otherwise specifically provided for etc, complete all as specified and directed.
11
-
-
M&L sunken treatment of Toilet/Bathroom as in following steps: i) Top of RCC slab in sunken portion including peripheral beams shall be plastered with 15mm thick in cement mortar 1 : 3 using approved water proofing compound @ 3% by weight of cement finished even and smooth using extra cement, curved at the junctions. ii) Apply two coats of epoxy resin/polymer modified cementations coating like brush bond of FOSROK/SIKA/Pedilite or equivalent, both on floor & beams. iii) Sunken slabs to be given 1:20 slope outward 25mm GI pipe spout with 300 mm projection beyond outer surface of wall shall be provided. iv) Water tightness of sunken portion to be tested by ponding with water for 72 hours. In case of even a slight mark of seepage, the portion to be treated and ponding shall be carried out again to confirm the water tightness of sunken slab. Note : No cutting in roof slab/beam shall be allowed for passing of CI pipes & fittings.The stage of water proofing to sunken slab shall be passed by Eng-in-charge/GE.
20
-
-
M&L for PCC 1:5:10 Type E2 (using 40mm graded crushed stone aggregate) as in filling sunken floor complete all as specified and as directed.
8
-
-
M&L for 25mm thick PCC 1:2:4 Type B-1 (using 20 mm graded crushed stone aggregate) as in sub base of floor, complete all as specified and as directed.
30
-
-
M&L for 75 mm thick cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in plinth protection finished fair and even withiout using extra cement, complete all as specified and directed.
40
-
-
Material and labour for taking down of existing roof treatment from roof and terrace, roughening surface of old concrete roof by picking, sweeping clean and washing down with water to remove dust, etc and applying roof treatment with the following steps and specifications:- a) Applying crack seal compound of same manufacture of waterproof to fill all cracks of observed on the roof.
b) Applying cement slurry over concrete surfaces @3kg/sqm. c) Rendering 15mm thick in cement mortar (1:4) mixed with water proofing compound as per manufactures’ instruction(not less than 3% by weight of cement) on cleaned concrete surfaces of roof and finishing the surfaces fair and even including curing the plastered surfaces for 7 days by ponding of water over the roof, (leveling course).
d) Applying evenly one coat of primer coating (diluted with water in the ratio specified by Manufacturers) (min @100-110Sq Ft per liter (diluted quantity)) on the cleaned plastered surfaces. The surface shall be left for air dry for minimum period of 2-3 Hrs.
e) Applying evenly one coat of elastomeric water proof coat in one direction (as specified by Manufacturers)(min@ 0.9-1.0 sqm per ltrs) and allow to air dry for 4-6 hrs before applying second coat in other direction perpendicular to the first one (as specified by Manufacturers) (min @0.9-1.0 sqm per ltrs. The total thickness of two coats shall be 0.5 to 0.6 mm.
f) The whole system shall be left for air cure for min Seven days (without any movement).
Make : - Dr Fixit Newcoat Ezee or Berger Home Shield PU RoofKoat or Asian Paints Smartcare Damp Proof or as equivalent approved by GE.
Note : - (i) The waterproofing shall be carried out in the last stage of execution to avoid any damages during the execution.
(ii) Payment against this item shall not be allowed till completion of all the stages of work for any slab. (iii) The work shall be executed through Authorized well-trained applicators as per manufacturer’s instructions after obtaining written approval from the GE
45
-
-
Material and labour for complete/Partial removal of loose/ cracked concrete including cutting of reinforcement at Single/Double/Tripal storey if required from RCC roof projection, chajja, fins, facia etc and applying bonding agent as per manufacture instruction as per and making good with RCC (1:1.5:3) type A0 using 12.5 mm graded aggregate) in any slab and in any position finsihed the surface even and smooth with out using extra cement including necesary formwork and welding/binding of reinforcement if required, complete all as specified and directed.
Note:- (1) reinforcement will be measured and paid seperately under respective items,
(2) Quoted rate shall be inclusive of bondig agent fosroc nitobond EP ,Sika hibond, Pidilite 301 pidicrete URP. (3) The quoted rate shall be inclusive of Scaffolding if required.
0.5
-
-
M&L for Mild steel TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.
60
-
-
S&F in repairs PVC connection pipe 15mm size with PTMT nuts of length 450mm long, complete all as specified and directed.
29
-
-
S&F in repair Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including connections to flushing pipe
and outgoing pipes fixed, complete all as specified and as directed.
7
-
-
S&F 15mm dia Push tap (Suitable for urinal) any colour high pressure of PTMT screwed for iron pipe and fixed, (Minimum weight 15mm-47gms/20mm- 75gms), complete all as specified and as directed.
7
-
-
S&F 50mm dia UPVC Pipes (SCH-40) with all fittings for urinal waste and waste line, complete all as specified and as directed.
19
-
-
Supply and fix in repair of rotational moulded,HDPE water storage tank of 500 ltrs capacity( Cylindrical vertical with closed top) ISI marked hoisted and fixed in position all as specified in SSR Part I including 02 Nos 20 mm bore full threaded GI nipple of required size including ball valves 20 mm bore high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed (Minimum weight 20mm - 210gms and refixing of inlet, outlet & over flow pipe etc, complete all as specified and as directed
4
-
-
Excavation in post holes (or similar holes) each not exceeding 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surfaces in soft/loose soil all as directed
120
-
-
Material and labour for Plain Cement Concrete (1:3:6) type C2 using 40mm graded aggregate as in Pillars, boundary pillars, posts etc. filling and mass concrete all as specified and directed.
11.6
-
-
Supply of chain link MS galvanisd fencing, any size or type, concrete all as specified and directed.
720
-
-
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, concrete all as specified and directed.
360
-
-
S&F 10 mm dia MS TMT bars of any length as in stiffener to chain link fencing fixed to fencing post, complete all as specified and directed .
370
-
-
S&F mild steel angle iron or other sections for post and struts in fencing, flat iron fillets (for securing wire mesh etc) to fencing post, cut to shape, drilled and countersunk for screw, including cutting tops to shape as directed, drilling holes, notching for wire, embedding in concrete and screwing etc. conforming to Fe-290 Gde E-165, concrete all as specified and directed.
1102
-
-
M&L for prepration of new steel surface of any description n. exc. 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, concrete all as specified and directed.
60
-
-
M&L for prepration of new steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
42
-
-
M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, concrete all as specified and directed.
300
-
-
Excavation in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m depth for foundation, etc. or shaft, wells, cesspits, MH, pier holes etc. n.exc 10 Sqm on plan and nexc 1.5 m in depth and getting out in soft/ loose soil, concrete all as specified and directed.
11.3
-
-
S&F of Double Wall Corrugated (DWC) HDPE pipes 150 mm bore single socketed in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed.
28
-
-
M&L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore, complete all as specified and directed.
25
-
-
M&L for Design Mix M-25 in Foundation, including raft footings, foundation beams, plinth beams,bases for column etc.,basement slabs, underreamed piles and mass concrete etc, complete all as specified and directed.
2.2
-
-
M&L for Design Mix M-25 in Beams, cantilevers,lintels, columns pillars,piers, posts, struts,chullah hoods, stair case,arches, domes, vaults,shell roofs, arch ribs,folded plates, slabs,balconies, canopies, deckslabs etc. or in similararticles etc, complete all as specified and directed.
2.3
-
-
M&L for RCC for M 25 (Design Mix) using 20 mm graded crushed stone aggregate as in Slab, chajjas and similar work, complete all as specified and directed.
0.5
-
-
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
220
-
-
S&F TMT bars 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed.
80
-
-
Use and waste of formwork to sides of column, pillars, posts, stanchions for rough finished flat surface, complete all as specified and directed.
32
-
-
Use and waste of formwork to sides and soffit of beams, lintels, cantilevers, shelves etc for rough finished flat surface, complete all as specified and directed.
25
-
-
Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter(Flat) rough finished, complete all as specified and directed.
5
-
-
Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.
2
-
-
Material and labour for Pre-cast cement concrete block masonry Type C1 (1:3:6) (using 20mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:6), rough finished flat surface complete all as specified and directed.
8
-
-
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils, complete all as specified and directed.
6
-
-
Removing of surplus soil to a distance not exceeding 50 m and deposited where directed at a level not exceeding 1.50m above the starting point, complete all as specified and directed.
5.3
-
-
S&F plain colour factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing etc, complete all as specified and directed.
1.22
-
-
M&L cutting into existing manholes for connecting new drains,making good to pipe & rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching as required for 150mm bore of pipe complete all as specified and directed.
1
-
-
M&L for providing PCC (1:2:4) type C1 using 12.50 mm graded aggregate as in surface channel and drain all as specified and directed.
2
-
-
Supply and Fix anodised powder coated (minium thickness 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
8
-
-
Supply & Fix Powder coated (minimum thickness of powder coating 50 micron) anodised aluminium window and ventilator shutters (sliding type), aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws etc, complete all as specified and as directed.
1.8
-
-
Material & Labour 4mm thick figured glass,n,exc 0.50 sqm each pane, pin headed type and glazing with oil putty or aluminium beads fixed to steel etc, complete all as specified and as directed
1.6
-
-
S&F stainless steel wire cloth , 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and as directed
1
-
-
S&F 600mm x 450mm bevelled edge mirror of selected quality glass, moulded on 6mm thick commercial ply wood and fixed to wooden plugs with cromium plated brass screw and cup washers, complete all as specified and as directed
1
-
-
S&F PVC valve less syphonic action flushing cistern type 9 to 10 ltrs capacity with inlet, ball valve, float and handle including bracket, white colour of approved make, complete all as specified and as directed
1
-
-
S&F 15 dia fancy type chromium plated Bib tap cast copper alloy etc, complete all as specified and as directed
2
-
-
S&F stop valve 15 mm dia CP fancy type, with long shank and cup cast copper alloy, screwed both ends for iron pipe or for unions, complete all as specified and as directed
2
-
-
S&F 15 mm dia fancy type pillar tap cast copper alloy, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe & fixed, complete all as specified and as directed
1
-
-
Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface, complete all as specified and as directed
16
-
-
M&L for prepration of new plastered surfaces and applying two coats of weather proof exterior emulsion paint (Apex Ultima or equivalent) (any colour/tint) with approved colour and pattern over a coat of 1 mm thick wall care putty and a coat of approved alkali primer as on walls of bldgs of any height including necessary scaffolding and safety measures and procedure, complete all as specified and directed.
32
-
-
M&L 100 mm thick PCC 1:2:4 Type B-2 ( using 40 mm graded crushed stone aggregate) as in sub base of floor, complete all as specified and directed.
5
-
-
M&L hardcore of brocken Stone of gauge n exc 63mm deposited,spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface, complete all as specified and directed.
0.5
-
-
M&L for CI floor trap with grating for 100mm dia outlet pipe, including making good distrubd area/surfaces with cement concrete/cement mortar 1:2:4 etc, complete all as specified and as directed.
2
-
-
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls etc, complete all as specified and directed.
16
-
-
S&F wash hand basin, white flat back of size 550 x 400mm excluding piller tap but including waste cupling, waste pipe and bracket etc, complete all as specified and directed.
1
-
-
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of camouflage colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed with self taping screws, complete all as specified and directed.
10
-
-
Material and Labour Rolled mild steel section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410-W (Gde-E-250) quality A all as specified and directed by the Engr-in-Charge.
105
-
-
M&L for Providing and fixing false ceiling of designer tile ivory/White painted (high pressure steam cured ) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width, including taking down old false ceiling board of any description alongwith rails and connecting items all complete at all heights as per direction of Engr-in-charge.
5
-
-
S&F Vitreous China urinals, half Stall Type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets,flush pipe, grating and Union for
discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) etc complete all as specified and as directed.
1
-
-
S&F 500 ltrs capacity rotational moulded polyethylene water storage tanks (Cylindrical verticle with closed top) noisfed and fixed in position, complete all as specified and as directed.
1
-
-
S&F PVC ball valve 20mm high pressure of PTM with epoxy coated aluminium rod and high density plastic ball serewed for iron pipe, complete all as specified and as directed.
1
-
-
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and directed.
96
-
-
Taking down carefully MCB DBs SP/TP by unscrewing from main switch boards/cut out boxes including sealing the cable ends and making good disturbed surface of wall etc as per existing, complete all as specified and directed.
4
-
-
Material and labour for point wiring for One light/fan point controlled by one,one way switch, with 1.5 Sqmm single core, PVC FRLSH insulated unsheathed, multistranded copper conductor drawn through and including PVC casing and caping including necessary accessories like bends, tees, PVC square and elbow etc fixed on wall/ceiling with 1.5 Sqmm PVC FRLSH insulated unsheathed multi stranded copper conductor cable as earth conitinuity (green in colour) connected to common earth dolly including sunken type pressed steel terminal boxes of suitable sizes with plastic laminated white/coloured top sheet cover 3 mm thick complete all as specified and directed as below :- Note: Cutting, chieseling and making good the existing surface for complete concealed wiring is deemed to be included in quoted rate, complete all as specified & directed.
61
-
-
All as per Sr. Item No. 119 herein-above but for One 5 Pin 5 Amps socket out let point on independent board.
21
-
-
All as per Sr. Item No. 119 herein-above but for One 5 Pin 5 Amps socket out let point on same board alongwith other suitable switchs.
8
-
-
All as per item No 119 here-in-before but using 2.5 sqmm PVC FRLS insulated copper condutor wire for connecting 15A socket on independent board.
13
-
-
Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way, complete all as specified & directed
69
-
-
Supply and fixing switch socket out let combination multipurpose 5 pin, 5/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered), complete all as specified & directed
13
-
-
Supply and fixing socket outlet multipurpose 3 pin, 5 Amps, 240 volts flush type (non shuttered) on same board, complete all as specified & directed
8
-
-
Supply and fixing switch socket out let combination multipurpose 5 pin, 5 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) in independent board, complete all as specified & directed
21
-
-
Supply and fixing ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals, complete all as specified & directed
44
-
-
Supply and fix of MCB SPN DB 4 way double door,IP 43 protection,Glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, complete all as specified and directed
2
-
-
Supply and fix of MCB SPN DB 8 way double door,IP 43 protection,Glazed door, isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09, complete all as specified and directed
4
-
-
Supply and fix MCB SPN 40Amp, complete all as specified & directed
6
-
-
Supply and fix MCB SP 6-32 Amp, complete all as specified & directed
28
-
-
Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire 4 mm dia by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (medium grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including, complete all as specified & directed.
1
-
-
Supply and fixing Bulb holder angular PVC/Polycarbonate suitable for batten fittings, complete all as specified and directed.
13
-
-
M&L for cutting of circular hole in any type of wall suitable size for fixing of exhaust fan of size 300mm sweep, grouting 04 Nos 100mm long 12mm dia stud bolt including making good to disturbed surfaces of wall to match as per the existing colour complete as directed and specified
16
-
-
S&F of exhaust fan 300 mm (minimum) sweep, metal body, light duty, 1200 RPM (minimum), AC single phase 230 watt, 50 Hz with bird guard, nuts, screw, bolts including electrical connection, complete all as specified and directed. Make:- Usha / Havells / Orient / Bajaj / crompton
17
-
-
Supply and fix LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed.
26
-
-
Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring two run of 6 Sqmm cable one run of casing capping and one run of 6 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run, complete all as specified and directed.
Note:- Three runs of 4 sqmm cable and one run of PVC conduite shall be measured as one unit.
20
-
-
Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLSH PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLSH PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring two run of 6 Sqmm cable one run of casing capping and one run of 6 Sqmm earth continuity wire for connection to DBs/dolly shall be deemed to be included in this item and shall be measured as one run and including taking down old submain wiring, complete all as specified and directed.
Note:- Three runs of 6 sqmm cable and one run of PVC conduite shall be measured as one unit.
60
-
-
Supply and fix LED bulb of 9 watt (warm white), complete all as specified and directed.
12
-
-
Supply and fix bulkhead luminair for LED lamps 1x9 watt, complete all as specified and directed.
2
-
-
Supply and fixing all in one comprising of high efficiency LEDs (120 Im/W), solar street Light with luminaire wattage 30 W, High Efficiency Mono Crystalline Solar PV Module 12V 50W, lithium Ferro phosphate battery 12.8V 24Ah with inbuilt BMS technology, high efficiency LED 93%, MPPT solar charge controller and aluminium extruded body, specially designed intelligent microwave sensor to control the dimming and brightness of light leads to extend working time and 5 mtr long octagonal pole (type CPT- 5030) top dia 70 mm bottom dia 130mm sheet thickness 3mm including base plate of size (L x B xT) 200 x 200 x 12mm, bolt size 4 x 16 mm dia and bolt length 450mm, including taking old unserviceable solar light of any capacity. Make : Crompton Cat No CSOP-815-30-57-HL5-PIR-LM-SR-NC, or its equivalent in Havells Phillips/Bajaj. all as directed and Specified. Note:- (i) The Quoted rate are inclusive of all Civil work (Excavation & Earth work) for fixing the pole including PCC work along with fixing of Base Plate with nuts and bolts as suitable and matching with the dimension of MS Pole. (ii) The Cost of making good of disturbed surface shall be included in quoted rates.
6
-
-
Schedule of Credit
-
-34520
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements