Military Engineer Services Tender

Lumpsum price worked out by the bidder/ tenderer for INTERNAL WATER SUPPLY as listed in Schedule 'A' Part-III.

Lumpsum price worked out by the bidder/ tenderer for INTERNAL ELECTRIFICATION as listed in Schedule 'A' Part-IV.

Lumpsum price worked out by the bidder/ tenderer for ROAD, HARDSTANDING & CULVERT as listed in Schedule 'A' Part-V.

Lumpsum price worked out by the bidder/ tenderer for SEWAGE DISPOSAL as listed in Schedule 'A' Part-VI.

Lumpsum price worked out by the bidder/ tenderer for AREA DRAINAGE as listed in Schedule 'A' Part-VII.

Lumpsum price worked out by the bidder/ tenderer for CHAIN LINK FENCING as listed in Schedule 'A' Part-VIII.

Lumpsum price worked out by the bidder/ tenderer for EXTERNAL WATER SUPPLY as listed in Schedule 'A' Part-IX.

Lumpsum price worked out by the bidder/ tenderer for EXTERNAL ELECTRIFICATION as listed in Schedule 'A' Part-X.

Sch 'A' Sec-XI (Miscellaneous Items)Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Cutting existing GI pipe 150 mm dia in position and incerting of new tee 150mm x 150mm x 25 mm including provision of new GI union 32 mm, including jointing necessary excavation and earth work in any type of soil complete all as directed.

Supply & fixing Modular Blank plae 1 module suitable for Modular Switch Boards all as specified and directed.

Supply & fixing Metal Flush Box with Modular cover plate 12 modules all as specified and directed

Supply & fixing Metal Flush Box with Modular cover plate 8 modules all as specified and directed

Sub main wiring with four single core 16 sqmm (nominal area) PVC insulated copper conductor FRLSH , multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit including two single core 16 sqmm copper conductor cable FRLSH as earth wire. NOTES :- (a) Four runs of cable with two runs of earth wire shall be measured as one length. (b) Cable required for connection to DBs shall be deemed to be included and shall not be measured separately. (c) Earth wire shall run inside the conduit.

Sub main wiring with two single core 10 sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit including 10 sqmm copper conductor cable FRLSH as earth wire. NOTES :- (a) Two runs of cable with one run of earth wire shall be measured as one length. (b) Cable required for connection to DBs shall be deemed to be included and shall not be measured separately. (c) Earth wire shall run inside the conduit.

Sub main wiring with two single core 6 sqmm (nominal area) PVC insulated copper conductor FRLSH, multi stranded, unsheathed 1100 volts grade IS-694 marked in PVC conduit including 6 sqmm copper conductor cable FRLSH as earth wire. NOTES :- (a) Two runs of cable with one run of earth wire shall be measured as one length. (b) Cable required for connection to DBs shall be deemed to be included and shall not be measured separately. (c) Earth wire shall run inside the conduit.

Supply and fixing Blanking plate for MCB DB of required size complete as specified and directed.

Supply and fixing MCB SPN 240 volts, 6 to 32 Amps, 10kA rupturing capacity 'C' series complete all as specified and directed.

Supply and fixing MCB Single Pole 240 volts, 6 to 32 Amps, 10kA rupturing capacity 'C' series complete all as specified and directed.

Supply and fixing MCB TPN 415 volts, 40 to 63 Amps, 10kA rupturing capacity 'C' series complete all as specified and directed.

Supply and fixing for exhaust fan 300mm sweep, 1400 RPM, AC single phase 230 V double ball bearing, complete with nuts, screws, bolts of specified sizes including electrical connection with twisted three core PVC insulated unsheathed flexible cord of size 0.75 sqmm copper conductor from celing rose to exhaust fan complete all as specified and directed.

Supply and fixing Recess mounted under canopy LED luminaire 80 watt with IP66 protection suitable for recess mounting complete with all accessories including and connecting of with twin core of PVC insulated 0.75 Sqmm copper conductor cable complete all as specified and directed.

Supply & fixing of Circular LED flood light 30 Watt(minimum) with innovative finless design and excellent thermal management and light distribution and necessary MS clamps made of size 25 x 3mm incl all required nuts, bolts, washer LED lamp, di- cast aluminium housing IP 66 with heat resistant clear glass cover, suitable type gasket & high power LED’s as light source with LED fitting system lumen not less than 95% Lumen per watt and electronic driver(80% efficiency level & THD 10%) , power factor shall be 0.95, ( 80% efficiency level & THD 10%) , power factor shall be 0.95 complete and including all other standard accessories as per manufacture instructions ,internally pre-wired including connecting up 3 core 1 sqmm copper conductor flexible wire/cable complete all as specified. MAKE : CG, cat No : LFLN11-30CDL or equivalent model of make as mention Appendix "B"

Supply & fixing Energy saving LED light fitting, 1 x 20 watt, 230 volts, Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD 10% suitable for surface/pendant mounting complete with all accessories including and connection of with twin core of PVC insulated 0.75 Sqmm copper conductor cable . Make :Havells Cat Pat No LHEXBLP7P71W020 or equivalent model of make as mention Appendix "B"

Supply & fixing Energy saving LED light fitting 34W, aesthetically designed 4 x 1 LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination suitable for 230 volts with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD 10% suitable for surface /pendant mounting complete with all accessories including and connection of with twin core of PVC insulated 0.75 Sqmm copper conductor cable complete all as specified and directed. Make :Havells Cat Pat No LHEWEIP71W1W034 or equivalent model of make as mention Appendix "B"

Supply and fixing new generation energy saving and environmental friendly long life LED security light 25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP opening separate driver compartment with IP 65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bend to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceilling rose to light fitting complete all as specified and directed. Make :Havells Cat Pat No LHETBXU7PA6S025 or equivalent model of make as mention Appendix "B"

Supply & fixing Energy saving LED light fitting 34W, aesthetically designed 4 x 1 LED flat panel for surface mounting which provides soft-light and glare free symmetrical illumination suitable for 230 volts with electronic driver and with best quality diffuser high lumen output, 2.5 KV voltage surge protection, PF 0.98, THD 10% suitable for surface /pendant mounting complete with all accessories including and connection of with twin core of PVC insulated 0.75 Sqmm copper conductor cable complete all as specified and directed. Make :CG Cat No : LCSFR4-36-CDL or equivalent model of make as mention Appendix "B"

Supply & fixing factory made IP-65 (Dust and power jet Proof according to IEC 60529) transparent steet light junction box of size 167 mm x 125 mm x 82 mm made of high quality polycarbonate (shock proof, rust free, corrosion free acid and chemical resistant, fire retardant having high impact (IK 08) totally insulated, UV resistant) having high grade gasket made of polyurethane with two cable gland for cable size 10 sqmm etc with MCB SP 6A and fixing on pole with MS flat iron of size 20 x 3mm with necesary nut & bolts complete all specified and directed.

Suppply & fixing LED street light fitting 1 x 140 W pressure die-cast housing with toughned glass and individual LEDs with secondary optics and IP 66 protestion complete including 4 sqmm 2 core aluminium conductor wire complete all as specified and directed.

Supply, install, testing and commissioning of distribution transformer step down, copper wounded having primary side for HT three phase 11KV & secondary for 433 Volt, 3 phase, 50 hertzs capacity of 63 KVA with the following specification :- (i) No load voltage ratio-11/0.433 KV.(ii) Nos of phase- Three (iii) Type of cooling-ONAN. (iv) Frequency-50 c/s(v) Vector group-DYN 11.(vi) Two earthing terminals for body earthing and two additional for neutral brought out on a bushing. (vii) Oil level gauge indicating oil level minimum and maximum. (viii) Lifting lugs. (ix) Rating and terminal marking plates. (x) Dehydrating breathing device which would not permit ingress of moisture, rain water and insects.(xi) Drain-cum-sampling valve (3/4" nominal size thread) preferably steel with plug, (xii) Thermometer pocket (for transformers of rating above 25 KVA). (xiii) Oil filling hole (1-1/4" Nominal size thread) with cover (for transformers without conservator). (xiv) Connection- Delta/Star(xv) Temperature rise in oil-45 deg Centigrade (xvi) Temperature rise in windings-55 deg Centigrade. (xvii) Material winding-Copper wound (xviii) High voltage/low voltage-Bushing with box.(xix) Service -OutdoorType (xx) Neutral- Internally connected with earth lead and bush. (xxi) Off load tap changing ( ± 7.5% in steps of ±2.5%). (xxii) Transformer supplied by the contractor shall comply energy efficient with energy efficient level 1 category of transformer manufactured by licensed OEM, as per IS : 1180 (Part-I) : 2014.(xxiii) FITTING ACCESSORIES:-as per clause no 149.14.1.2 of SSR. (xxiv) Suitable plinth of height 1.5m above GL for installation of transformer.

Supply, installation, testing and commissioning of factory made powder coated (CPRI approved) outdoor type, dust & vermin proof feeder pillar box made out of 3.15mm CRCA steel sheet of suitable size and angle iron 40 mm x 40mm x 6 mm , powder coated over one coat of red oxide primer suitably grouted in PCC-M10 using 20 mm graded stone aggregate including bus bar, internal wiring with PVC insulated single core cables of copper conductor of suitable size duly numbered with tags for the circuits with hinged double door shutters (front & rear), cubical type locking arrangement and slanted roof. The size of panel boards shall be suitable for housing the accessories given here under and also suitable for operation on AC 415 Volt, 3 phase, 50 Hz supply system. The panel board shall comprise of following items & all specified in SSR Part-I clause no 19.21 and complete all specified and directed. (A) INCOMING:- (i) MCCB 4 pole 100 Amp 415 v, 25 ka - 01 No (ii) Phase indicator lamp LED clustar type RYB (Set of Three) - 01 Set (iii) LCD multifunctioning meter - 01 No (iv) CT 100/5 amps - set of three. (v) Aluminium bus bar 4 strip (vi) Internal wiring for panel incl insulators, sleeves etc. (B) OUTGOING (i) MCCB 3 pole 32 to 63 Ampt 415 v 25 KA - 03 Nos (ii) MCB , DP 10A, 240 Volts, 10KA - 2 No (iii) CTs 160/5 amps - set of three (iv) Steet Light Astronomical Time Switch - 01 No (v) Power contractor single phase 20 amps - 01 No.

Subtotal of Schedule 'A' Part -XI

Lumpsum price worked out by the tenderer for Provisional sum of Rs 46,600/- for following items including of earth work, concrete work, steel section etc. complete all as directed. (i) Steel gate 5.0m wide & 2.1 m Height : 01 Nos Note:- Contactor shall be quote, contractors percentage(amount) plus pre-prices amount.