Military Engineer Services Tender

All as per Sr. Item No. 3 here in before but for One bell point controlled by one push button switch.

All as per Sr. Item No. 3 here in before but for One 3 Pin 5 Amps socket outlet point on independent board.

All as per Sr. Item No. 3 here in before but for One 3 Pin 5 Amps socket out let point on same board controlled by one way switch

All as per Sr. Item No. 3 here in before but for One light point controlled by two way switch.

All as per item No 3 here-in-before but using 2.5 sqmm PVC FRLS insulated copper condutor wire for connecting 15A socket on independent board.

Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, one way complete all as specifed and directed.

Supply and fixing of switch piano flush type 240 Volts 5 Amps, SP, two way complete all as specifed/directed.

Supply and fixing of bell push piano flush type one way 240 Volts 5 Amps all as specified.

Supply and fixing of switch socket outlet combination 3 Pin, 5 Amps, 240 volts flush type (non shuttered) complete all as specified/ directed.

Supply & fixing of socket outlet 2 in 1, 3 pin 5 Amps 240 Volts flush type (non shuttered) complete all as specified / directed.

Supply and fixing switch socket out let combination multipurpose 5 pin, 15/16 Amps and (with 3 pin 5 Amps outlet also) flush type (non shuttered) complete all as specified/directed.

Supply and fixing Bulb holder angular PVC/Polycarbonate suitable for batten fittings complete all as directed.

Supply and fixing bell electric, 240 Volts, single pole complete all as specified and directed.

Supply and fixing ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified and directed.

Supply & fixing ceiling fan regulator electronic, Deluxe, rotary, step type, 120/280 V complete all as specified and directed.

Supply and fixing LED fitting 1x18 watts including Tube rod, 230 Volts, bipin holders connector block etc.complete with all accessories internally pre-wired and including provision of PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting, complete all as specified and directed. Make: Cat Part No. Bajaj Batten 112181 Batten for LED TUBE LIGHT fitting BLRB- DB 118. Bajaj Tube rod No BLRB-18 Watt CWc XE (112753) or as equivalent in specified make.

Supply and fixing LED Tube light of 18 watt in existing batten after replacing the broken/unserviceable bipin holders connector block and PVC round block 7.5cm dia and 2 cm in depth (2 Nos) for mounting the fittings and electrically connecting with three single core 23x0.0076 PVC insulated multistranded copper conductor flexible cable from ceiling rose to light fitting complete all as specified and directed. Make: Bajaj Tube rod No BLRB-18 Watt CWc XE (112753) or as equivalent in specified make.

Supply and fix in repairs of MCCB TPN DB 4 way vertical type double door, IP 43 protection isolated neutral bar, insulated bus bar assembly, mechanical strength of IK08, suitablefor MCCB's upto 125 Amps as incomer complete all as specified and directed.

Supply and fix in repairs of MCB TPN DB 4 way double door, IP 43 protection isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed.

Supply and fix in repairs of MCB SPN DB 8 way double door, IP 43 protection isolated neutral bar, insulated bus bar assembly, mechanical strength of IK09 complete all as specified and directed.

Supply and fix in repairs of MCCB 100 Amps 415volts four pole, 16 kA, adjustable overload setting complete all as specified and directed.

Supply and fix in repairs of MCCB 125 Amps 415volts four pole, 16 kA, adjustable overload setting complete all as specified and directed.

Supply & fixing in repair MCB TPN 63 Amps 'B' Series 10 KA, 415 volts complete all as specified and directed.

Supply & fixing in repair MCB TPN 40 Amps 'B' Series 10 KA, 415 volts complete all as specified and directed.

Supply & fixing in repair MCB SPN 40 Amps 'B' Series 10 KA, 240 volts complete all as specified and directed.

Supply & fixing in repair MCB SPN 32 Amps 'B' Series 10 KA, 240 volts complete all as specified and directed.

Supply & fixing in repair MCB SP 6 to 32 Amps 'B' Series 10 KA, 240 volts complete all as specified and directed.

Material and labour for earthing complete with galvanised steel earth plate electrode of size 600 x 600 x 6 mm thick, burried directly in ground (earth pit not less than 2.25 m below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to earth lead wire of 4 mm dia as earthing by means of nuts, bolts and washers of galvanised iron and earth lead protected by galvanised iron pipe 15 mm bore (light grade) and connected to earth test point and including cement concrete pit in PCC (1:3:6) type C-1(using 20 mm graded aggregate) and pre-cast RCC cover slab of size 540 x 540 x 50 mm thick, reinforced with 8 mm dia TMT bars both ways and one handle for lifting made with 10 mm dia mild steel bar,funnel, wire mesh 20 mm bore galvanised (light grade) for watering, charcoal and salt in alternate layers including necessary execuation and earth works in any types of soil complete all as shown on Electrical plate No 3 of MES SSR-I including taking out the old earthing material complete all as specified and directed.

Material & labour for Sub main wiring with two runs of single core 6 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 6 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring connection to DBs/dolly and making good to disturbed shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

Material & labour for Sub main wiring with two runs of single core 4 Sqmm (Nominal Area) FRLS PVC insulated and unsheathed multi standed copper conductor cable LT 1100 volts grade drawn thorugh and including PVC casing capping of adequate size fixed on surfafce of wall/ceiling with all necessary fittings and accessaries and 1 run of FRLS PVC insulated and unsheathed insulated single core cable with multi standered copper conductor of size 4 Sqmm as earth wire (green in colour) run through casing capping and connected common earth dolly including taking out the old sub main wiring connection to DBs/dolly and making good to disturbed surfaces shall be deemed to be included in this item and shall be measured as one run complete all as specified and directed.

S & F PVC blanking plate, one model sutable for MCB DB complete all as specified and directed Make : Legrand/Havells/ L&T or equivalent in specified makes

Fixing in repairs ceiling rose surface PVC/Polycarbonate, 65x50 mm two to three terminals complete all as specified/directed.

Supply only LED bulb of 15 Watt (Cool day light) all as specified and directed. Make- BAJAJ B22 or equivalent in specified makes

Supply only LED bulb of 9 Watt (Warm white) all as specified and directed. Make- BAJAJ B22 or equivalent in specified makes

Supply & Fix Recess mounting light that mimics the pattern of sun from dawn to dusk by changing the color temperatures, recessed mounted 2x2 liminaire suitable for armstrong/Grid ceiling, fixture size: (LxWxH) in (595x595x65)mm including taking down of old unserviceable fitting complete all as specified and directed. Make- Havells Model No.- VENUSNEOTW2X2PLR42WLEDTWMOD or as equivalent in specified make

Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 63 Amps complete all as specified and directed. Make-Havells model- IHCNFE0063 or equivalent in specified make

Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 100 Amps complete all as specified and directed. Make-Havells model- IHCNFE0100 or equivalent in specified make

Supply and fix PVC Switch board boxes of size 6x8 inch including taking down of old one and fitting of new one complete all as specified and directed. . Make- Presto teak or ISI marked only.

Supply and fix PVC Switch board boxes of size 7x4 inch including taking down of old one and fitting of new one complete all as specified and directed. . Make- Presto teak or ISI marked only.

Supply and fix PVC Switch board boxes of size 4x4 inch including taking down of old one and fitting of new one complete all as specified and directed. . Make- Presto teak or ISI marked only.