Military Engineer Services Tender

Scarifying or picking gravelled macadam or bituminous macadam surface in area not exceeding 400sqm and depth exceeding 50mm but not exceeding 100mm complete all as specified and directed.

Screening of road metal, Chipings, etc on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both sides of screen measured)

Material and labour for 7.5cm thick compacted thickness water bound macadam with coarse aggregate of grading-3( 50m to 20mm size), using granite, trap or basalt, spread, rolled and consolidated to required gradient or camber complete all as specified and directed.

Labour only for 7.5 cm thick (compacted thickness) WBM, using old stone aggregates from screening item here-in-before, spread, rolled and consolidated to gradient and camber required complete all as specified

Material and labour for preparation of unsurfaced WBM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags or compressed air to remove all loose, dirt, etc. and applying evenly a tack coat with bituminous primer (Paving bitumen of grade VG-10) @ 10 Kg per 10Sqm complete all as specified and directed.

Material and labour for providing bituminous premixed carpet 40mm consolidated thickness with 0.54 cum of stone chippings mixed with 29.20 Kg of binder (paving bitumen) (VG-20) per 10 Sqm, rolled and compacted to required camber and gradient etc. complete all as specified and directed.

Material and labour for applying liquid seal coat by applying evenly binder (VG-20) @ 9.8 Kg per 10 Sqm blinding with 6.3 mm size stone chipping @ 0.09 cum per 10 sqm and rolled to a uniform smooth surface complete all as specified and directed.

Material and labour for painting lines,dashes,arrows, letters, etc. on roads using thermo plastic road marking paint 2.5mm uniform thickness finished with glass beads (MORTH Grade) white or yellow colour with the help of road marking machine including cleaning the surface thoroughly and removing all dirt dust complete all as specified and directed.

Providing and fixing Glow studs of minimum size 100x100 and 20 mm thick made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D 4280. The slope of retro-reflective surface shall be 35 (+/-5) degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I : 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-Charge. MAKE : 3M/AVERY DENNISONA/VARGO/DARK EYE.

Supply and fix in repair delinator round body fitted with two numbers 100mm dia of highly reflective reflectors of minimum size 700mm x 50mm x 100mm made out of PMMA materials mounted on MS pipe of 50mm dia duly powder coated, anti-rust and anti theft steel net all as directed.