Department Of Atomic Energy Tender

Providing and fixing PVC Door Frame of size 50 x 47 mm with a wall thickness of 5 mm (+- 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos. of PVC bracket of size 190x100 mm long arms of cross section size 35x15 mm & self-driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100 mm long anchor fasteners complete, all as per manufacture's specification and direction of Engineer-in-charge.

35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded solid PVC profiles, 5 mm (+-0.2 mm ) thick, having stiles & rails (except lock rail) of size 95x35x5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered ( on both sides), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40x20x1 mm, joints of stiles & rails to be mitered cut & joint with the help of PVC solvent cement, self-driven self-tapping screw & M.S. rectangular pipes braket of size 190x100 mm of cross section size 35x17x1 mm at each corner. Single piece extruded 5mm thick solid PVC lock rail of size 115x35mm, out of which 75mm to be flat and 20mm to be tapered at both ends having 15mm solid core in middle of rail section integrally extruded, fixing the stiles & rails with the help of solvent and self-driven self-tapping screw of 125x11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacture's specification and direction of Engineer-in-charge.

Providing and fixing 30mm thick panelled or panelled and glazed shutters for doors, fixing with butt hinges of required size with necessary screws, including cost of panelling, including cost of 3 Nos. butt hinges of 5 inches long, 12 nos. screws, 2 Nos. tower bolt of 3 inches long, 2 nos. bow handle of 3 inches long etc. all complete as per direction of Engineer-in-charge.