Department Of Agricultural Research And Education Tender

Plain Cement Concrete works with coarse aggregates of sizes 13mm to 32mm in foundation bed for footing steps, walls, brick works etc. as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately)(a) in prop 1:4:8

Providing & laying concrete in RCC works using Concrete Mixture Machine with coarse sand & 20mm downgraded stone aggregate including dewatering if necessary, and curing complete but excluding cost of form work and reinforcement for reinforced cement concrete work (form work and reinforcement will be measured and paid separately) In foundation and sub structure including plinth beam etc and other works not less than 100 mm thick up to plinth level (without using admixture, plasticizer)(a) Prop 1:2:4

Supplying, fitting and fixing chain link fencing of 8 S.W.G, G.I. Wire 70mmx70mm mesh fitted to M.S angle iron post at 2000mm apart of specification detailed below including supplying, fitting and fixing hooks, eye bolts with nuts, staples and bolts including three horizontal lines of G.I wire 8 S.W.G at top, middle and bottom and with one vertical line to each fencing post for keeping the fencing tight and erect complete, including one coat of primer painting to M.S angle iron post in P.C.C base etc. with following. a) Corner and end posts with M.S angle of size 75mmx75mmx6mm and length not less than 1800mm only duly slotted and bottom torque with two numbers as stay posts. b) Intermediate post with M.S angle of size 70mmx70mmx6mm and length not less than 1800mm only duly slotted and bottom torque and splayed. c) Stay post posts with M.S angle of size 75mmx75mmx6mm and length not less than 1800mm only duly slotted and bottom torque and splayed. All M.S angle iron posts are to be fitted to P.C.C base embedded not less than 600mm (P.C.C work shall be measured and paid separately)

Providing and fixing of 1.8 m high barbed wire fencing fixed to angle iron post at site including drilling of holes every 3.00 m apart, E/W and cc of base in proportion 1:3:6, painting with black enamel paint, etc as per CPWD Specifications 16.17 vol-2 0.45 m slanting height barbed wire fencing on top of BRC welded fencing