Military Engineer Services Tender

S&F MCCB 4 pole, 415 V, adjustable type 100 Amp with breaking capacity 16 KA complete all as specified and directed.

S&F MCCB 4 pole, 415 V, adjustable type 125 Amp with breaking capacity16 KA complete all as specified and directed.

S&F MCCB 4 pole, 415 V, adjustable type 160 Amp with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 pole, 415 V, adjustable type 200 Amp with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 pole, 415 V, adjustable type 250 Amp with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 pole, 415 V, adjustable type 400 Amp with breaking capacity 36 KA complete all as specified and directed.

S&F MCCB 4 pole, 415 V, adjustable type 630 Amp with breaking capacity 50 KA complete all as specified and directed.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, poles struts, laying of cables/pipes, etc., not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm as in soils complete all as specified and as directed.

Removing excavated materials to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5 mtr above the starting point as in soils complete all as specified and as directed.

Material and labour for cutting of existing road/ hard standing etc of any description of surface and excavation in trenches 30cm wide and 60cm depth for laying of UG electric cable including making good the disturbed road/hard standing by providing PCC (1:3:6) type C1 to match with existing surface complete all as specified and directed. Note:- The rate includes returning, filling, watering and ramming in layers and making good the surface with PCC (1:3:6) as the existing after laying of electic cables

Supply and spread sand in trenches as sand cushioning to underground cable for protection with dry fine river sand and provide required cover after punning down 18CM will be measured and paid complete all as specified and directed.(Note: Thickness of sand cushion after punning down will be measured and paid.)

Supply and laying well burnt sub class ‘B’ bricks (designated 75) locally available best quality, laid dry in trenches for protection of underground cable complete all as specified and directed.

Supply and laying of 40 mm bore GI tube light grade as in cable protection pipe including all fittings and including taking down / taking out from trench of cable complete all as specified and directed.

Taking up/down worn out/damaged/unserviceable XLPE /PVC insulated underground cable armoured, heavy duty with aluminium conductors of any size, 1100 Volt grade from trench/duct/pole/wall/ pipes/rooftops etc. complete all as specified and directed.

Supply, laying, Jointing and testing of LT UG cable XLPE insulated,PVC bedded galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm 4 core laid in trenches / on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed.

All as per serial item No. 18 here-in-above but for 25 Sqmm 4 Core.

All as per serial item No. 18 here-in-above but for 35 Sqmm 4 Core.

All as per serial item No. 18 here-in-above but for 50 Sqmm 3.5 Core.

M&L for cleaning, scrapping, re-painting including marking of Panel No and Marking of MCCBs (incomming & Outgoing) with Acrylic sheet in bold letters complete all as specified and directed.

M&L for repair of indoor/outdoor type feeder pillar box any type door hinge broken, MS work structure damage, locking handle, shutter not proper closed, rubber gasket, any type welding works required complete all as specified and directed.

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized iron 25x4 mm strip as earthing lead by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: GI Earthing lead upto 7.5m in length is deemed to be included in the unit rate. The lead required beyond 7.5m shall be measured and paid for separately)

Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level connected to galvanized earth wire 4mm dia by means of galvanized iron or steel bolts nuts check nuts and washers and other end connected with earthing testing point including providing suitable testing points as directed including funnel, watering pipe of 20mm bore, light grade galvanized iron pipe, wire mesh charcoal of coal dust and common salt in alternative layer all around the earth electrode compacted thickness 15cm with concrete pit in PCC 1:3:6 type C1 50mm thick pre cast RCC 1:2:4 type B1 cover slab set in CM (1:4) re-enforcement with 8mm dia deformed bars @ 15cm C/C and suitable handle of 10mm dia MS round bars, including earth work in hard/dense soil as required complete all as shown in electrical plate No 3 of MES Schedule Part I and testing on completion all as specified and as directed. (Note: GI Earthing lead upto 7.5m in length is deemed to be included in the unit rate. The lead required beyond 7.5m shall be measured and paid for separately)

Supply & fixing Earth continuity conductor or Main earthing Lead Fixed to wall on suitable procelain insulators of size 25 x 3 mm Aluminium Strip complete all as specified and directed.

S&F earth continuity conductor or main earthing lead of size 4 mm GI wire fixed to wall on porcelin /PVC insulator buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. incl removal of old strips as required. complete all as specified and directed.

Supply & Fix in replacement digital 0 to 200 Amp meter complete all as specified and directed.

Supply & Fix in replacement digital 0 to 200 Volt meter complete all as specified and directed.

Supply & Fix in replacement CT coil 250/5 Amps complete all as specified and directed.

Supply & Fix in replacement phase indicator lamp (R,Y,B) complete all as specified and directed.

Supply & fix off load change over switch foure pole of cap 100 Amp with HRC fuse complete all as specified.

Supply & fix off load change over switch foure pole of cap 200 Amp with HRC fuse ccomplete all as specified and directed.

Taking up/down worn out /damaged /unserviceable PVC insulated Service wire/unarmoard cable with aluminium conductors of any size , 1100 V grade from trench/duct/pole/wall/pipes/roof tops etc complete all as specified and directed

S&F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 6 sqmm size.complete all as specified and directed.

S&F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 10 sqmm size.complete all as specified and directed.

S&F of 1100 volts grade heavy duty cable PVC insulated aluminium conductor served with inner sheating of PVC tape and over all PVC sheathed in service connections suspended by insulating hangers not more than one meter apart including 4 mm suspension wire one twin core cable 2 core flat of 16 sqmm size.complete all as specified and directed.

S&F, Test , commissioning of LT weather proof panel board powder coated outdoor type double door shutter, made out of CRCA sheet 1.8mm thick outer and 1.6mm thick for inner door confirming to IS 8623 with angle iron 50x50x6 mm outdoor, floor mounting type with closed bus bar, chamber and with copper bus bar with necessary insulators suitable for 3 phase, 4 wire 50 Hz AC supply as per CPRI approved including provn of digital Ammeter 0-800A, digital voltmeter 0-500 Volts, CT's of suitable ratio, indicator lamps R-Y-B, selector switches and internal wiring including making PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed with the following work also includes provision of suitable asize of cable glands, cable lugs, nut, bolts, washers etc. the bottom portion of enclousre shall be minimum 60 cm above ground level of lges of angle iron with following includes:- (a) Aluminium bus bar capacity 1100 Amps for Phase R-Y-B & Neutral (b) ACB 4 pole 415V 250 Amps I/C - 01 No (c) MCCB FP 200 Amps 36 KA -01 No (d) MCCB FP 160 Amps 36 KA -01 No (e) MCCB FP 63 Amps 16 KA -02 No

Supply & fixing copper busbar with coloure code (R, Y, B) laminated insulation of 400 Amps Fixed to panel on procelain insulators incl nut-bollts & washer with electrical connection complete all as specified & directed.

Supply & fixing Aluminium busbar with coloure code (R, Y, B) laminated insulation of 400 Amps Fixed to panel on procelain insulators incl nut-bollts & washer with electrical connection complete all as specified & directed.

Supply & fixing copper busbar with coloure code (R, Y, B) laminated insulation of 800 Amps Fixed to panel on procelain insulators incl nut-bollts & washer with electrical connection complete all as specified & directed.

Supply & fixing Aluminium busbar with coloure code (R, Y, B) laminated insulation of 800 Amps Fixed to panel on procelain insulators incl nut-bollts & washer with electrical connection complete all as specified & directed.

M & L for vegitation of grass cutting all around surrounding and inside area LT panels , feeder pillars & transfromer at MES installations will be provided sufficient man power with tools by the contractor whereever is required as directed (a) Contractor will arrange the manpower for cleaning the sub stn as and when needed be deemed to be included in the rate quoted (b) Contractor will arrange own conveyance and communication system like moble etc to maintian/cleaning the MES installations at Leimakhong Mil Stn

Dismantling and disconnecting old burnt lugs of any cap & size after disconnecting all electric connections and removal from panels complete all as directed.

S&F of aluminium lugs of size 25 sqmm fixed with MCCBs/busbar in LT Panels /feeder pillars incl nuts , bolts & washer complete all as specified and directed

S&F of aluminium lugs of size 35 sqmm fixed with MCCBs/busbar in LT Panels /feeder pillars incl nuts , bolts & washer complete all as specified and directed

S&F of aluminium lugs of size 50 sqmm fixed with MCCBs/busbar in LT Panels /feeder pillars incl nuts , bolts & washer complete all as specified and directed

S&F of aluminium lugs of size 70 sqmm fixed with MCCBs/busbar in LT Panels /feeder pillars incl nuts , bolts & washer complete all as specified and directed