Indian Oil Corporation Limited Tender
View potential partner for Manipur IOCL Tender
Indian Oil Corporation Limited - IOCL Tender
Civil And Construction
Excavation
Eprocure
Opening Date6 Mar 2025
Closing Soon13 Mar 2025
Tender Amount₹ 1,33,51,706.37
Costs
EMD
0Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_ERO_183973_1Tender No
RCC/ERO/37/2024-25/LT-IOAOD SOTender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Special Instructions to the Bidders
Bidders_help_Document_for_Preferencial_ Bidding_20230207_v1
Format for miscellaneous Declaration(s) / Undertaking(s)
BOQ Items
... More
i) Local Fine Sand within grading zone IV
38
2122
80644.74
... More
v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
4
8749
34997.44
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes providing & mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specifications. Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil
13
660
8584.29
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
9
10789
97101.45
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
10
13008
130085.2
... More
i) Foundations,footings,bases of columns, etc. for mass concrete
15.85
398
6311.15
... More
iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ)
90
968
87191.1
... More
iv) Lintels, beams plinth beams,girders bressumers and cantilevers
35
771
27008.8
... More
v) Columns, Pillars, Piers, Abutments, Posts and Struts.
60
1025
61536.6
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
3000
116
350190
... More
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
15
8607
129109.2
... More
iv) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand) in superstructure in all shapes & sizes in superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL
14
10610
148545.88
... More
viii) Half brick masonry with common burnt clay F.P.S.(non modular) brick of class designation 7.5 in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
52.76
1081
57065.74
... More
Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks
80.58
951
76691.21
... More
Providing and fixing 100x85x5.5 mm (heavy type) bright finished brass butt hinges with necessary screws etc. complete :
21.05
242
5108.41
... More
Providing & fixing chromium plated brass 100mm mortice latch & lock with 6 levers & a pair of lever handles with necessary screws etc complete (best make of approved quality).
6
1127
6763.86
... More
i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections
118
637
75267.48
... More
iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
113.4
763
86605.85
... More
ii) Pre-laminated particle board with decorative lamination on both sides
4.76
1463
6965.88
... More
i) With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)
12.75
1397
17815.7
... More
iii) With float glass panes of 8.0 mm thickness (weight not less than 20kg/sqm)
12.75
2044
26063.04
... More
i) Powder coated minimum thickness 50 micron aluminium
14
116
1636.04
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover
4
4115
16461.76
... More
Providing and fixing ball bearing for rolling shutters.
4
586
2347.56
... More
40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete.
67.72
696
47175.11
... More
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Tiles of dark shade pigment using ordinary cement
46
1297
59671.66
... More
Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (minimum thickness of 5 mm) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade.
33.62
1440
48420.2
... More
Providing & laying Ceramic Glazed floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) jointing with grey cement slurry@ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc. complete.
8.12
1295
10520.92
... More
i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4
38.14
2097
80000.94
... More
ii) 110 mm diameter
30
426
12792.6
... More
ii) 12mm Cement plaster of mix 1:6 (1 cement: 6 coarse sand)
130.8
368
48189.34
... More
iii) 15mm cement plaster of mix 1:4 (1 cement: 4 coarse sand) on rough side of half or single brick wall
134.28
445
59867.4
... More
i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand)
78.95
317
25091.1
... More
Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
281.6
274
77428.74
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :
281.6
83
23620.61
... More
Finishing walls with Acrylic Smooth exterior paint of required shade (2 or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior Primer applied @ 2.20kg/10 sqm)
115.2
230
26522.5
... More
Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm
166.39
198
33076.67
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
127
247
31450.28
... More
i) W.C. pan with ISI marked white solid plastic seat and lid
4
7354
29416.32
... More
ii) White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap
4
3509
14037.08
... More
i) Rectangular shape 453x357mm
2
1565
3131.88
... More
Providing and fixing 600x120x5mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets & guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
4
1176
4706.88
... More
i) C.P. brass
4
816
3264.04
... More
ii) 100mm inlet & 75mm outlet SCI S&S as per IS - 3989.
4
2207
8831.4
... More
i) 15 mm nominal outer dia Pipes
36
572
20614.68
... More
ii) 20 mm nominal outer dia Pipes
24
668
16041.6
... More
iii) 25 mm nominal outer dia Pipes
24
785
18852.72
... More
i) 15 mm nominal bore
1
422
422.92
... More
i) 15 mm nominal bore
8
422
3383.36
... More
i) 25 mm nominal bore
1
694
694.94
... More
Providing and fixing 600x450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
4
1793
7174.04
... More
i) 100x100 mm size P type with common burnt clay bricks of class Designation 7.5
4
3224
12899.52
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and SW drain pipe 100 mm diameter, 1.8 m long complete as per standard design with common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
35336
35336.22
... More
ELECTRIFICATION OF SALES BUILDING
-
-
-
... More
iv) 20 KVA stabilizer
1
82116
82116.81
... More
Cable dressing and tagging of cables in installed Main Electrical Panel and Distribution Boards for Panel board codes MPLEN03302 and MPLEN03303 The work includes disconnection of all cables from panel side, removing all cabes upto entry to the panel room, relaying the cables through cable tray, or cable trench or electrical conduit and termination of cables with proper size cable glands in panel side after tagging with cable tags for identification. Payment for cable tray, conduit, any civil works, cable glands to be paid seperately.
1
12152
12152.45
... More
ii) Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
31
1140
35346.82
... More
i) 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire
140
212
29765.4
... More
ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire
120
243
29182.8
... More
iii) 2 x 4 sq mm + 1 x 4 sq mm earth wire
100
291
29123
... More
iv) 2 x 6 sq mm + 1 x 6 sq mm earth wire
60
362
21755.4
... More
iv) 6 module frame
7
484
3394.44
... More
v) 8 module frame
2
557
1115.46
... More
vii) 6A Modular Switch
27
405
10953.9
... More
ix) 6A, 3 Pin Modular Socket
4
464
1856.16
... More
x) 15 A 6 Pin Modular socket
7
530
3714.9
... More
xii) Fan Regulator of stepped modular type
2
836
1673.42
... More
iii) 1200 mm sweep
2
3216
6432.3
... More
ii) 9" dia light duty, make Khaitan or equivalent
4
2437
9750.24
... More
iii) 12" heavy duty, make GEC or equivalent
1
2867
2867.7
... More
Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 18 Watt, having IP65 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers and accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc.
8
834
6672.16
... More
Supply and Fixing of Discrete LED (Light Emitting Diode) Tube lights of 8 Watt, having IP20 protection class with Pressure Die Cast Aluminium housing & with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer in charge. The LED shall be operating under voltage range of 140-270V with power factor more than 0.9. CCT(Correlated Colour temperature) shall be 5700 Kelvin (5665 K +/- 355 K), CRI (Colour rendering index) not less than 65. LED efficacy should be minimum 100 lumens/watt. The driver shall be of constant volt & constant current type with internal surge protection. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports & reference/batch nos of LEDs & fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc.
12
651
7817.16
... More
i) Electrical insulating mats made of PVC Elastomer 3mm Thick & 1 mtr wide near swichboards, etc as per direction of Engineer In charge. Mat should conform to IS 15652 Class A - suitable for safe working voltage of upto 33 kV. Test certificate to be provided with supply. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip. Mat's top Surface should be Antiskid Dotted & Bottom Surface should be Textured for Floor Grip.
2
5259
10519.98
... More
iii) Supply and fixing of shock treatment chart in English, Hindi & local language framed in glass framework.
1
362
362.06
... More
iv) 11 KV grade hand gloves, ISI mark
1
845
845.77
... More
Supply, installation, testing & Commissioning of wall mounted switchboard in sheet enclosure consisting of 110 A, 4P, 50 kA, Contactor, 230V AC trip coil, START / STOP Push button, ON / OFF Indication lamp(LED), Auxiliary contactors, Power & Control Terminals. Push buttons and indication lamps shall be mounted on front door. 2 Nos. of SP 6A MCB shall be mounted on front door. MCB shall get incoming supply from incomer terminal of Contactor. Outgoing from MCBs shall be wired uptoterminals inside enclosure. The enclosure shall have 6 nos. of cable entry, 2 nos. suitable for 3.5Cx35 sq mm cable & 4 entry suitable for 3Cx2.5 sq mm cable. The work includes supply and installation of enclosure, Contactor, MCBs lamp, Push buttons, terminals, internal wiring (Contactor Make: L&T/GE/C&S/Siemens/ABB).
1
28834
28834.8
... More
viii) 15 A Modular switch
4
470
1882.04
... More
iii) 4 module frame
3
417
1253.76
... More
iii) 100 Amps., 4 Pole
1
10353
10353.5
... More
ii) 12 way DB with 32A DP as incoming-1No.& 6to16ASP as outgoing-12No
1
7038
7038.1
... More
Supply and Installation of Flame Proof ESD Push Button
2
3305
6611.84
... More
CONSTRUCTION OF CANOPY (11Mx13M)
-
-
-
... More
i) All kinds of Soil
46
254
11693.2
... More
Extra for every additional lift of 1.5m or part thereof in excavation or banking excavated or stacked materials in all kinds of soil
8.5
126
1074.23
... More
i) Local Fine Sand within grading zone IV
39
2122
82766.97
... More
v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
1.6
8749
13998.98
... More
i) Foundations,footings,bases of column
3.5
398
1393.63
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
10
10789
107890.5
... More
i) Foundations,footings,bases of columns, etc. for mass concrete
12.96
398
5160.41
... More
v) Columns, Pillars, Piers, Abutments, Posts and Struts.
13.44
1025
13784.2
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
650
116
75874.5
... More
Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks
16
951
15227.84
... More
Preparation of fabrication drawings, bill of materials, getting approval from consultant/Client, including supply and factory fabrication of Pre-engineered steel structures such as columns, column bracings, sheeting posts, rafters, roof bracings, struts,roof purlins, side runners, sag angles, sag rods, chequered plates, stair cases, ladder, Anchor bolts (anchor bolts supply by Pre Engineered Beam vendor and fixing shall be carried out by civil contractor) etc and all other structural items as required in case of canopies at ROs. This includes surface prepartion by shot/grit/copper slag blasting to Swedish Standard SA 2½ for painting, supply and application of Painting for structural members as per specifications (Primer coat: Red Oxide Zinc Phosphate Primer (P3), DFT 60-70 µm (2 coats of 30-35 µm); Finish coat: Synthetic Enamel Paint (F6), DFT 40-50 µm (2 coats of 20-25 µm); Total DFT shall be minimum 100 µm) at site of approved colour, including loading, transportation, unloading, delivery at erection site, storage and handling at site, site assembly and finally erection of structures at appropriate location, alignment and bolting/welding of all structures true to line, level, plumb and dimension. The work shall be completed in all respect as per drawings, technical specification and direction of the Engineer-in-Charge. (Payment shall be made based on approved fabrication drawings)
9295
178
1661481.25
... More
ii) Plain Sheet for Ridges (500 - 600mm).
20
581
11638.6
... More
iii) Plain sheet for Flashings/ Aprons (Upto 600 mm)
48
515
24732
... More
iii) 160 mm diameter
26
1130
29381.56
... More
Providing and fixing 150F/200F flush panel,(pre-coated steel) False Ceiling made of Cold rolled steel sheet conforming to IS 513, having minimum yield stress and tensile stress as 240 Mpa and 300 Mpa respectively. Base metal thickness for ceiling panel and Carriers shall be 0.45mm and 0.55mm respectively. The steel surface shall have hot dip metallic coated with Zinc coating (galvanizing) as per IS277, with total mass of coating on both sides shall be 120 gms/sqm. The steel shall have organic coating with Regular Modified Polyester (RMP) paint on continues coil coating line. The thickness of coating on top side shall be 20-25 Microns (i.e. 15-18 microns RMP paint, over 5-7 microns epoxy primer) and back side 8-10 Microns RMP paint over epoxy primer. Total Coated Thickness (TCT) shall be 0.50 MM for Ceiling panel and 0.60 MM for Carrier. Sheet shall have protective Sheet shall have protective guard film of thickness of 25 microns minimum to avoid scratches while transportation and should be supplied in single length up to 6m (for panel) and up to 5m (for carrier) or as desired by Engineer-in-charge. The ceiling panel shall be clipped into carriers which are suspended from steel trusses/purlins with the help of GI suspension angle of size 25x25x0.5mm thick by means of rigid suspension system meant for exterior. The longitudinal joints of two panels shall be butt joined with a special type of panel splice to be fixed from inner side. The carrier will be joined with carrier splices maintaining a module of 150 mm. The spans shall not exceed as recommended and manufacturer recommendations shall be followed on installation procedure.
143
2097
299968.24
... More
Providing & fixing BARE Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of bare metal thickness 0.55 mm as per ASTM A446 having yield stress of 275mpa, surface shall have hot dip metallic coating of Aluminium Zinc alloy comprising of 55% aluminium,43.5% zinc & 1.5% silicon, Sheet shall have protective guard film of 25 microns minimum to avoid scratches while transportation & should be supplied in single length up to 6m or as desired by Engineer-in-charge.
143
1446
206786.58
... More
Providing and fixing 700mm wide rain water gutter fabricated out of 1200mm wide Roll of 18 Gauge Aluminium sheets including MS clamp supports, fittings, fasteners etc. complete as per drawing . (NO joints shall be provided in the gutter and the same has to be fabricated from a continuous roll of Aluminium sheet)
22
1456
32036.4
... More
v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate
32
812
25988.48
... More
iv) 3 Core x 2.5 sq. mm Copper Cable FRLS
350
213
74616.5
... More
vi) 3 Core x 1.5 sq. mm.
2
503
1007.78
... More
vii) 3 Core x 2.5 sq. mm
7
503
3527.23
... More
v) 25 x 3 mm GI strip
40
107
4319.2
... More
Supply and fixing of Linear Recessed mounted LED (Light Emitting Diode) Light fittings of size 2400mm and 80 Watt, having IP 65 protection class with Pressure Die Cast Aluminium housing and with Polycarbonate diffuser of approved make or equivalent as per direction of Engineer-in-charge. High Efficiency Translucence(HET) diffuser. Colour Rendering Index CRI80, Temp-0 to 45 Deg C, Driver efficiency85%, THD 10%, CCT- 6500 K Powerfactor0.95, Surge protection-2 kV, Multistage Isolated Constant Current-Constant Voltage operated driver with range 140-270V AC and Safety Extra Low Voltage Safe level 60V DC as per IEC standard, Luminaire lumen ≥ 2100lm. Each lot of Fittings shall have serial numbers & accompany LM79 / IS 16106 test reports and reference/batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of at least 72 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminarie etc
16
16169
258710.4
... More
PAVER DRIVEWAY WITH APPROACH
-
-
-
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm. depth dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth within premises
800
219
175296
... More
i) With material confirming to grade-I (size 75 mm to .075 mm) having CBR value - 30, Thickness as desired
440
3519
1548536
... More
Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to .075 mm) to wet mix macadam (WMM) specifications including premixing the material with water at OMC for all leads and lifts, laying in uniform layers with mechanical paver finisher in sub-base/base course on well prepared surface and compacting with vibratory roller of 8 to 10 ton capacity to achieve the desired density, complete as per specifications & directions of Engineer-in- charge
225
3692
830772
... More
ii) M40 grade 80 mm thick reflective type Lacquered finish
985
1666
1641295.65
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
318
116
37120.14
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
4
10789
43156.2
... More
iv) Lintels, beams plinth beams,girders bressumers and cantilevers
26.5
771
20449.52
... More
iv) PCC 1 Cement:2 Coarse Sand:4 Graded Stone Aggregate 40mm
3
11806
35419.35
... More
Providing and fixing of alternate black and yellow plastic road hump safety speed breaker of width minimum 350 mm and height 75mm all complete, as per specification and direction of Engineer-in-charge.
20
2609
52184
... More
CONSTRUCTION CULVERT WITH GRATING
-
-
-
... More
i) All kinds of Soil
76.5
254
19446.3
... More
iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
2.9
9489
27519.67
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
30.78
10789
332086.96
... More
i) Foundations,footings,bases of columns, etc. for mass concrete
166.48
398
66289.01
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
3227.04
116
376692.38
... More
Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
3928.25
142
558715
... More
Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks
22.22
951
21147.66
... More
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
1.09
8607
9381.94
... More
ii) 12mm Cement plaster of mix 1:6 (1 cement: 6 coarse sand)
95.78
368
35287.27
... More
Providing Neat cement punning
81.08
87
7113.15
... More
CONSTRUCTION SIDE DRAIN
-
-
-
... More
i) All kinds of Soil
45
254
11439
... More
iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
3.38
9489
32074.65
... More
vi) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 40mm)
5.45
8563
46671.95
... More
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
11.25
8607
96831.9
... More
Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks
76.5
951
72808.11
... More
ii) 12mm Cement plaster of mix 1:6 (1 cement: 6 coarse sand)
216
368
79578.72
... More
Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm
54
198
10734.66
... More
CONSTRUCTION OF SEPTIC TANK
-
-
-
... More
i) All kinds of Soil
14.08
254
3579.14
... More
v) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 20mm
0.7
11217
7852.5
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
0.6
10789
6473.43
... More
iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ)
5.64
968
5463.98
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
81.38
116
9499.49
... More
i) Brick work in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
4.95
8913
44119.94
... More
xvi) Half brick masonry with Class designation 5.0 bricks in Cement mortar 1:4 ( 1 cement : 4 coarse sand) IN superstructure ABOVE PLINTH & UP TO FLOOR V LEVEL
3.3
1250
4125.36
... More
i) 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand)
32.21
373
12014.97
... More
Providing Neat cement punning
27.21
87
2387.13
... More
i) 455x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.
2
1853
3707.84
... More
YARD LIGHTING
-
-
-
... More
i) All kinds of Soil
32
254
8134.4
... More
iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
2.4
9489
22774.9
... More
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
8
10789
86312.4
... More
i) Foundations,footings,bases of columns, etc. for mass concrete
52
398
20705.36
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
184
116
21478.32
... More
iv) 3 Core x 2.5 sq. mm Copper Cable FRLS
200
213
42638
... More
vii) 3 Core x 2.5 sq. mm
8
510
4086.8
... More
Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen
30
828
24859.8
... More
Supplying and providing 100mm square hensel weather proof junction box for emblem pole/ light pole/yard light
8
3259
26076.08
... More
iii) S/E of 5 Meter high galvanised Octagonal pole with top 60mm(A/F), bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 210 x 210 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanised foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides)
8
14991
119935.12
... More
i) S/E Arm " L " bracket 38/50mm dia on pole, as per specifications and direction of Engineer in charge
8
2012
16103.76
... More
ii) "L" Pole
4
1631
6526.24
... More
Supply and fixing of 100 W LED (Light Emitting Diode) light fixture with fittings and accessories for Yard lighting purpose having IP66 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff = 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc.
12
11010
132124.56
... More
AUTOMATION READINESS
-
-
-
... More
iii) 3 Core x 1.5 sq. mm. (copper)
1
160
160.79
... More
i) For cables 2.5 to 4 sqmm XLPE / AYFY
6
2324
13949.16
... More
ii) 2+8 way SPN
1
2562
2562.94
... More
ii) Upto 32A DP MCB
4
809
3238.68
... More
v) 4 Core x 2.5 sq. mm Copper Cable FRLS
45
247
11140.2
... More
Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen
20
828
16573.2
... More
PROVISIONS FOR RAIN WATER HARVESTING
-
-
-
... More
iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
0.5
9489
4744.77
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank IS : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1000
12
12300
... More
ii) 110 mm diameter
12
426
5117.04
... More
ii) 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire
40
243
9727.6
... More
ix) 6A, 3 Pin Modular Socket
1
464
464.04
... More
i) 1HP Jet
1
23963
23963.1
... More
BUFFER STRIP
-
-
-
... More
i) All kinds of Soil
4.8
254
1220.16
... More
iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
0.41
9489
3890.71
... More
i) Foundations,footings,bases of column
21.04
398
8377.71
... More
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
2.4
8607
20657.47
... More
Providing and laying dry brick on edge flooring in required pattern with bricks of Class designation 7.5 on a bed of 12 mm mud mortar including filling joints with river sand with common burnt clay non- modular bricks
4.8
951
4568.35
... More
ii) 12mm Cement plaster of mix 1:6 (1 cement: 6 coarse sand)
14.4
368
5305.25
... More
Finishing walls with Deluxe Multi surface paint system for interiors & exteriors using Primer as per manufacturers specifications with two or more coats applied on wall @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm
14.4
198
2862.58
... More
AIR COMPRESSOR & DAG WITH SHED
-
-
-
... More
ii) Horizontal air compressor Assembly of 3 HP (160-220 LITRES) including civil works
1
67174
67174.74
... More
Tyre Inflator Supply & installation of Digital tyre inflator which is microprocessor based, automatic air pressure controller with solenoid controlled nozzle for automatic fill and release functions. Complete with weather proof cabinet, 3 digit LED displays with backlight illuminations i.e. one for actual tyre pressure and another for set pressure. Air filter, remote controller, cables, PVC hose pipe and working pressure upto 10bar (Excluding civil work for foundation,etc.)
1
81827
81827.96
... More
i) 15 mm dia. nominal bore
2
341
682.56
... More
iv) 3 Core x 2.5 sq. mm Copper Cable FRLS
111.8
213
23834.64
... More
i) All kinds of Soil
1.39
254
353.34
... More
v) 1:3:6(1 Cement : 3 Coarse Sand : 6 Graded stone aggregate of 20mm)
0.6
8749
5249.62
... More
iii) 1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
1.5
9489
14234.31
... More
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
1.1
8607
9468.01
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m
0.7
307
214.92
... More
iv) Granite of any colour and shade having Area of slab over 0.50 sqm
4.6
5602
25769.89
... More
Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
241
142
34277.43
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins,rafters & trusses & including cutting to size & shape wherever required:- 1.00mm thick G.S. Sheet with zinc coating not less than 275gm/m²
11
1725
18978.52
... More
Supplying & fixing of 18 gauge GI plain sheet of approved make with necessary folding/ fabrication using hydraulic press for flashing sheet / fascia, etc. in roofing / buildings / sheds etc. including all necessary fixtures etc., complete
4
5362
21451.84
... More
FRONT LIT HOARDING
-
-
-
... More
i) All kinds of Soil
3.19
254
810.9
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, within premises and lift upto 1.5m
1.85
307
567.97
... More
iv) PCC 1 Cement:2 Coarse Sand:4 Graded Stone Aggregate 40mm
3.44
11806
40614.19
... More
Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
1600
142
227568
... More
ii) Thermo Mechanically Treated Bars of Fe- 500D grade or more, conforming to IS1786
565
116
65952.45
... More
ii)12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand)
3.2
355
1137.31
... More
Painting on G.S. sheet with synthetic enamel paint of approved brand & manufacture of required colour to give an even shade, 2 or more coats,including a coat of approved steel primer but excluding a coat of mordant solution
82.91
192
15994.17
... More
iii) Granite of any colour and shade having Area of slab upto 0.50 sqm
3.85
5895
22696.79
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more coats over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
35.3
247
8741.69
... More
ii) 2 Core x 2.5 sq. mm. (copper)
84.4
170
14415.52
... More
vii) 3 Core x 2.5 sq. mm
3
510
1532.55
... More
i) For cables 2.5 to 4 sqmm XLPE / AYFY
1
2324
2324.83
... More
Supply and fixing of 30 W LED (Light Emitting Diode) light fixture with fittings and accessories for hoarding light purposes having IP65 protection class with Pressure Die Cast LM6/ADC12/LM24 housing and with toughened glass or UV stabilized polycarbonate cover type of approved make or equivalent as per direction of Engineer-in-charge. The LED driver shall have an in-built high voltage cutoff = 290 V with power factor of complete fitting greater than 0.90. CCT (Correlated Colour temperature) shall be in the range of 5665 K +/- 355 K as per ANSI standard C78.377, CRI (Colour rendering index) should include all colour range from R1 to R15 and 70 for outdoor luminaire. LED efficacy shall be greater than 140 lumens/watt @ 350mA drive current. The minimum system lumen efficacy of the luminaire shall be 100 Lumens per Watt. The Surge Protection Device (SPD) should be series type with fail safe, surge protection for minimum 3kV shall be provided. Supply of complete fitting with all accessories as per specification attached and as per direction of engineer in charge. Each lot of fittings shall accompany test certificates LM79/ IS:16106 and reference/ batch nos of LEDs and fittings for verification at site. The supply of LED lighting shall be covered by a warranty of minimum 60 months from the date of supply of the lighting and the LED light fitting shall be complete in all respects including LED, LED Driver, Electronic circuitory, Luminaire etc.
5
3888
19443.15
... More
Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen
30
828
24859.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%