Indian Oil Corporation Limited Tender
View complete overview of Manipur IOCL Tender
Costs
EMD
₹ 2,30,226Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_ERO_83882_1Bid Award Id
ViewTender No
RCC/ERO/37/2018-19/PT-144Tender Authority
Indian Oil Corporation Limited ViewPurchaser Address
-Website
http://https://www.iocl.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Special_Instructions_to_the_Bidders
All Mandatory Declarations to be submitted in Bidders Letter head duly signed.
BOQ Items
ii) Ordinary rock
140
-
323.33
Providing and laying Dry brick on edge flooring in required pattern with bricks of Class designation 75 on a bed of 12mm mud mortar including filling joints with fine sand complete.
60
-
754.75
Providing & laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments,pillars,posts,struts, buttresses,string or lacing courses, parapets,coping, bed blocks, anchor blocks, plain window sills, fillets etc. UP TO FLOOR V LEVEL excluding the cost of centering, shuttering and finishing :
-
-
-
vii)PCC 1 Cement:3 Fine Sand:6 Graded Stone Aggregate 40mm
6
-
8206.83
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
3100
-
82.79
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
30
-
9091.1
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
70
-
283.69
Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge :
-
-
-
v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate
50
-
550.26
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
-
-
-
iii) 160 mm diameter PVC Rain water pipe
50
-
738
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
ii) Inside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets with common burnt clay bricks of class designation 75
6
-
7996.06
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty
-
-
-
iv) 300 mm dia. R.C.C. pipe
120
-
758.48
Providing & fixing Klippon Galvalume steel profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of bare metal thickness 0.50mm as per ASTM A446 having yield stress of 275mpa, surface shall have hot dip metallic coating of Aluminium Zinc alloy comprising of 55% aluminium,43.5% zinc & 1.5% silicon, with 5-7 micron epoxy primer and polyester top coat of 15-18 micron on both sides,total coated thickness(TCT) of 0.58mm.Sheet shall have protective guard film of 25 microns minimum to avoid scratches while transportation & should be supplied in single length up to 6m or as desired by Engineer-in-charge.
-
-
-
i) Profile Sheet for roofing
288
-
2041.53
iii) Plain sheet for Flashings/ Aprons.( Upto 600 mm)
110
-
486.78
Providing and fixing 700mm wide rain water gutter fabricated out of 1200mm wide Roll of 18 Gauge Aluminium sheets including MS clamp supports, fittings, fasteners etc. complete as per drawing . (NO joints shall be provided in the gutter and the same has to be fabricated from a continuous roll of Aluminium sheet)
75
-
1063.37
Providing ridges or hips of width 60cm over all width plain G.S.sheet 0.80mm thick with zinc coating not less than 275gm/m², fixed with polymer coated J. or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.
90
-
889.82
Providing and fixing 150F/200F flush panel,(pre-coated steel) False Ceiling made of cold rolled steel sheet conforming to IS 513, having minimum yield stress of 240mpa & minimum tensile stress of 300mpa.Base metal thickness 0.45mm for ceiling panels and 0.55mm for carriers. The sheet shall be hot dip metallic coated with Zinc coating ( galvanising) as per IS 277, coating mass of 120gsm on both sides, over which organic coating with Modified polyester paint on a continuous coil coating line. Top side of ceiling panels and carrier shall have 15 micron modified polyester paint over 5 micron epoxy primer and Bottom side with Alkyd back coat over 5 micron primer Total coated thickness for Panels to be 0.50mm and for carriers 0.60mm. The ceiling panels shall be clipped in to carriers, suspended from steel/trusses /other members with the help of suspension angle of 25x25x0.5mm by means of rigid suspension system meant for exterior. Longitudinal joints of two panels shall be but jointed with special type of panel splice to be fixed from inner side.Carrier shall be jointed with carrier splices maintaining a module of 150mm
288
-
1642.41
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge
450
-
236.69
Supply and Laying 4 Core x 16 sq. mm Aluminium Cable FRLS as per specifications and direction of Engineer in charge
45
-
249.2
CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compression cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F cable termination for 3 Core x 2.5 sq. mm with Non FLP double compression glands,lugs etc. as per specifications and direction of Engineer-in charge.
9
-
403.51
Supply & Fixing of Weatherproof (IP-65) Thermoplastic Cable Junction Box with terminal block fitted inside the box suitable for following cable sizes.
-
-
-
for 2.5 sq.mm. cable entry size with 9 terminals
8
-
1844.05
MCB DISTRIBUTION BOARD INCLUSIVE OF 3- PHASE MCB Supply & fixing of MCB Distribution Board double door type inclusive of MCB, Three Phase, as per Approved Make of following types: (MCB - 10KA Breaking Capacity)
-
-
-
6 way DB with 63A FP RCBO, 300 mA sensitivity as incoming - 1No. & 6 to 16A SP as outgoing - 6 Nos. for each phase.
1
-
22902.08
FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Beluga/CEAG-FCG /Flexor/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F Cable termination for 3 Core x 1.5 sq. mm. with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
6
-
458.87
P/F Cable termination for 3 Core x 2.5 sq. mm with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
20
-
458.87
Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following :
-
-
-
Supply & Laying Earthing 10 S.W.G. Cu. Wire as per specifications and direction of Engineer in Charge.
160
-
83.12
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty
-
-
-
ii) 150 mm dia. R.C.C. pipe
100
-
521.74
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture
450
-
123.96
Supply and fixing of under –canopy recessed mounting discrete LED light fitting of 80 W with Fitting and accessories. The LED (Light Emitting Diode)of 80 Watt should be operating under voltage range of 140-277V with power factor more than 0.9.CCT (Correlated colour temperature) shall be 5700 Kelvin (5665K+/-335K), CRI (Colour rendering index) not less than 65 and LED efficacy of minimum 120 lumens/watt. The fitting shall conform to IP65 Protection class with under pressure die cast Aluminium housing. The luminaire system should have a minimum efficacy of 90 lumens per watt. The driver shall be of constant volt & constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification attached and as per direction of Engineer in charge. Each lot of fitting shall accompany test certificates LM79/IS:16106 and reference/batch nos of LEDs and fitting for verification at site.
24
-
15275
CONSTRUCTION OF DRIVEWAY
-
-
-
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth within site and lift upto 1.5 m, disposed soil to be levelled and neatly dressed
1000
-
77.52
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
2
-
8018.37
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
8
-
9091.1
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
80
-
283.69
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
650
-
82.79
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
8
-
6950.17
Providing and laying cement plaster on surfaces with Coarse sand including curing etc.
-
-
-
ii) 12mm Cement plaster of mix1:6 (1 cement: 6 coarse sand)
120
-
246.1
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
120
-
164.26
Construction of granular sub-base by providing close graded material conforming to specifications, mixing in a mechanical mixer plant at Optimum Moisture Content, carriage of mixed material by tippers to work site, for all lead and lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and roller to achieve the desired density, complete as per specification compacting with vibratory power & direction of Engineer-in-charge.
-
-
-
ii) With material confirming to grade-I (size 53 mm to .075 mm) having CBR value -30,Thickness as desired
350
-
3042.6
Supply and laying of water bound macadam of 100 mm consolidated thickness for subbase with 90 to 45 mm stone aggregate,11.2mm size screenings, chippings of stone and murrum spreading, watering and consolidating in camber with power roller complete as/specifications.
1000
-
352.84
Supply and laying of water bound macadam in layers, each of 75 mm thick (consolidated) with 63 mm to 45 mm stone aggregate. Each layer shall be consolidated by power roller after watering, spreading chippings of stone and murrum complete as per specifications. Item includes supply of murrum 6 mm thick, watering and rolling with power roller complete with preparation of surface. Rate per Layer
2000
-
283.19
Providing & laying 80mm thick factory made Pre-cast cement concrete interlocking paver block of M 40 grade made by block making machine with strong vibratory compaction & of approved size and design/ shape shade and manufacturers and as per IOCL's specifications. The paver block will have peripheral chamfer,with average crushing strength more than 40 N/Sq.mm as/ BS6717 Part -1(1986), maximum water absorption of 2% after 10 minutes and 5% after 24 hrs. as per BS 1881, maximum dimensional deviations of +/- 2mm on length & width and +/- 3mm on on thickness. The job includes supplying & laying a layer of 50mm thick clean course sand on thoroughly compacted sub-base below the paver blocks, cutting the paver blocks wherever required with hydraulic splitter, filling in the joints at the edges of paver blocks with sand,compacting with machine vibrator to required line and level, etc. complete.(Payment for provision of edge restraints shall be made separately);- Grey or Coloured 80mm thick paver blocks
1000
-
1842.98
INSTALLATION OF TANKS
-
-
-
Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
1500
-
98.88
Installation of supplied 20 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gasket for manhole complete as per attached specifications. RCC works wherever mentioned shall be of grade M20
-
-
-
In brick masonry pit with RCC matt under driveway including RCC top slab as per standard Drg. ENG/318.Man hole cover plates and frame to be paid separately .
2
-
591721.13
Installation of supplied 50 KL Tank as per specified drawings as per work description but excluding all works of kerb wall and Gasket for manhole complete as per attached specifications. RCC works wherever mentioned shall be of grade M20
-
-
-
In brick masonry pit with RCC strip under driveway including RCC top slab as per standard Drg. ENG/323.Man hole cover plates and frame to be paid separately .
2
-
792910.13
Supplying and installation of the following threaded
-
-
-
80 mm dia Aluminium camlock coupling - Male only
4
-
915.64
Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose ( In case of tank same shall be loaded by the tank fabrication contractor). Octroi if any, shall be paid on production of receipt.
-
-
-
Transportation of 15/20 KL Tank with fittings : 0 - 30 Km
1
-
11317.13
Transportn of 15/20KL Tank: Extra for each addtnl. Km above 30km
600
-
69.08
Transportation of 50/70 KL Tanks with fittings : 0 - 30 Km
2
-
13499.12
Transportn of 50/70 KL Tank :Extra for each addtnl. Km above 30km
1200
-
69.08
Exhuming of tanks of following capacities with fittings. Item includes excavation wherever required , dismantling of tank with fittings , Pipeline connections , man hole cover plates if any , removing dead stock , sludge oil and storing them in barrels at safe place , degassing , exhuming tank from the pit stacking of the tank within premises etc. as per specifications . Back filling , dismantling of RCC Slab , masonary shall be paid separately .
-
-
-
Exhuming of tanks of 15 KL Tank
2
-
17860.85
Exhuming of tanks of 20 KL Tank
1
-
19320.61
Supply and fixing Pressure Vacuum Valves of 2 inches for fixing to the Vent Pipes of Underground MS tanks. The valve should be in closed position at normal operating pressure of the tank. The Valve shall be capable for activation at set pressure of 3" ± 0.5 water column to release excess pressure of tank to the atmosphere and open at vacuum of 8" ± 2.0 water column to induce the atmosphere pressure to the tank. PV valve should be diaphragm of dead weight or spring loaded type or combination of any. The weight of the PV valve shall not exceed 2.0 kg. top of the valve shall be provided with cover/cap/ weather hood to prevent the entry of rain water. Valve material,Cover and adopter shall be of Aluminium/polypropylene, diaphragm if used should be of Neoprene, O ring should be of rubber/neoprene, Net/Mesh Pressure puppet ,Vacuum puppet,screws and spring should be of stainless steel. Suitable adopter with one end fitted with valve and the other end should have threading for fixing on Vent pipe of 40mm. PV valves shall have: UL 842 certification of CARB approval or test certificate from any Govt.lab. PV valve shall have PESO approval.
2
-
7537.22
INSTALLATION OF DISPENSING UNIT
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
20
-
184.23
Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete
15
-
1342.38
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
3
-
8018.37
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
8
-
6950.17
viii) Half brick masonry in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
3
-
868.1
Providing and laying Dry brick on edge flooring in required pattern with bricks of Class designation 75 on a bed of 12mm mud mortar including filling joints with fine sand complete.
22
-
754.75
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters,sills,facias,Pump Island & similar locations of required size of shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment,epoxy touch ups, including rubbing,curing moulding & polishing to edge to give high gloss finish etc. complete at all levels.
-
-
-
iv) Granite of any colour and shade having Area of slab over 0.50 sqm
28
-
4553.78
Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping
-
-
-
S/L Threaded U/G HD MS Pipes of 80 mm dia with fittings,doping
20
-
1515.71
S/L Threaded U/G HD MS Pipes of 50 mm dia with fittings,doping
40
-
1059.57
S/L Threaded U/G HD MS Pipes of 40 mm dia with fittings,doping
40
-
816.08
Supply, fabrication, laying and testing of MS, BLACK, ERW, threaded pipes, heavy class conforming to IS 1239, PART I as per IOCL Specifications including pipeline fittings like bends, tee etc as required and as directed for Above Ground pipeline including painting 2 coats of red oxide zinc phosphate primer and 2 coats of Synthetic enamel / aluminium finish paint as per IOCL specifications
-
-
-
S/L Threaded A/G HD MS Pipes of 40 mm dia with fittings,Painting
40
-
536.51
Supply, fabrication, laying and testing of MS black, ERW welded, pipes, heavy class conforming to IS 1239, PART I as per IOCL specifications including pipeline fittings like bends, tee etc as required and as directed for Underground pipeline with doping
-
-
-
S/L Welded U/G HD MS Pipes of 50mm dia with fittings,doping
175
-
1126.28
Supply & welding slip-on flanges conforming to IS2062 GrA, ANSI B16.5, Class#150 with 3 runs of weld outside and one run of weld inside the flanges as per specifications and standard Drg.enclosed herein
-
-
-
S/W Slipon flanges of 50 mm dia. conforming to IS2062 GrA, ANSI B16.5,Class 150 as per specifications and standard Drg.enclosed herein
6
-
1240.36
Supply and installation of screwed type gun metal valves as per IOC specifications: Ball Valve
-
-
-
S/I Screwed type GM Ball Valve of 50 mm dia
4
-
6953.6
Supplying and installation of the following threaded Caps conforming to detailed specification
-
-
-
S/I of Threaded caps of 50 mm dia for dip pipe
2
-
346.66
Supplying and installation of the following threaded Nipple conforming to detailed specification
-
-
-
S/I of Threaded Nipple of 50 mm dia.
3
-
270.6
S/I of Threaded Union of50 mm
3
-
509.01
INSTALLATION OF SD/HD DISPENSING PUMPS (MONO /DUAL) Installation of supplied standard duty/heavy duty dispensing pump on existing pump island as per IOCL's drawings and instructions including supplying /filling required quantity of dry sand in the pit(s) below the pump
-
-
-
Installation of DU Including providing necessary anchor bolts and C.C. foundation
1
-
5526.57
Installation of supplied Multi Product Pumps / Dispensers on pump island as per manufacturers installation manual, drawings, including supplying, providing necessary frame of ISMC 100, foundation bolts, supplying and filling required quantity of dry sand in pits below the pump.
-
-
-
2 product - 4 nozzle MPPs/MPDs
2
-
11291.75
Transportation of equipment from one location to another location including enroute all taxes, levies and unloading/loading by a suitable vehicle exclusively for this purpose ( In case of tank same shall be loaded by the tank fabrication contractor). Octroi if any, shall be paid on production of receipt.
-
-
-
Transportation of MPD pumps (Each) : 0 - 30 Km
2
-
6476.08
Transportn of Pumps(Each): Extra for every additional Km above 30 km
1200
-
17.27
Removing connected dispensing pump from pedestal including disconnection of pipeline, electrical connection, removal of nuts of the foundation bolts etc. complete.
4
-
1013.64
Installation of Corporation supplied Standard Submersible Turbine Pump on the existing Manhole Cover as per drawing and direction of Engineer in Charge
4
-
1452.45
ELECTRIFICATION OF DISPENSING UNIT
-
-
-
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : Light Duty
-
-
-
ii) 150 mm dia. R.C.C. pipe
120
-
521.74
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge
550
-
236.69
CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compression cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F cable termination for 3 Core x 2.5 sq. mm with Non FLP double compression glands,lugs etc. as per specifications and direction of Engineer-in charge.
6
-
403.51
FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Beluga/CEAG-FCG /Flexor/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F Cable termination for 3 Core x 2.5 sq. mm with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
6
-
458.87
CONSTANT VOLTAGE TRANSFORMER Supplying, installation, testing and commissioning of single phase, air cooled constant voltage transformer of approved make having input voltage range of 180-260V and output voltage of 220/230V with sine wave output wave form and having automatic current limiting and short circuit protection including all accessories complete (for displays) for the following VA ratings.
-
-
-
500VA CVT
3
-
9991.6
SINGLE SERVO VOLTAGE STABILISER Supply and fixing of 230V, Single phase, AC Servo voltage stabilizer of approved makes,(Range - 180 - 250 minimum) shall be provided for Individual dispensing pump as per IE Regulation and as per specification
-
-
-
5KVA stabilizer
3
-
18627.66
CONSTRUCTION OF BUFFER STRIP
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
30
-
184.23
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
3
-
8018.37
Centering and shuttering including strutting, propping etc. and removal of form work for PCC
-
-
-
i) C&S for PCC in foundations,footings,bases of column
16
-
283.69
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
6
-
6950.17
Providing and laying Dry brick on edge flooring in required pattern with bricks of Class designation 75 on a bed of 12mm mud mortar including filling joints with fine sand complete.
10
-
754.75
Providing and laying cement plaster on surfaces with Coarse sand including curing etc.
-
-
-
ii) 12mm Cement plaster of mix1:6 (1 cement: 6 coarse sand)
70
-
246.1
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
70
-
164.26
CONSTRUCTION OF SALES BUILDING
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
45
-
184.23
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering, within premises and lift upto 1.5m
18
-
183.93
Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete
30
-
1342.38
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
8
-
8018.37
Providing & laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments,pillars,posts,struts, buttresses,string or lacing courses, parapets,coping, bed blocks, anchor blocks, plain window sills, fillets etc. UP TO FLOOR V LEVEL excluding the cost of centering, shuttering and finishing :
-
-
-
vi) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 40mm
6
-
8273.24
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes mixing water proofing material in cement concrete work @ 1 kg per 50kg of cement. Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil.
12
-
589.39
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
14
-
9091.1
Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars,piers, abutments, posts and struts etc.UP TO FLOOR V LVL excluding cost of centering,shuttering, finishing and reinforcement :
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
10
-
10452.05
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
90
-
283.69
iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ)
120
-
617.69
iv) Lintels, beams plinth beams,girders bressumers and cantilevers
35
-
501.55
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
2900
-
82.79
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
12
-
6950.17
iv) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand) in superstructure ABVOE PLINTH & UP TO FLOOR V LEVEL
10
-
8165.95
viii) Half brick masonry in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
20
-
868.1
Providing and laying Dry brick on edge flooring in required pattern with bricks of Class designation 75 on a bed of 12mm mud mortar including filling joints with fine sand complete.
80
-
754.75
Providing and fixing 100x85x5.5 mm (heavy type) bright finished brass butt hinges with necessary screws etc. complete :
18
-
237.61
Providing and fixing chrome plated brass hanging type floor door stopper with necessary screws, etc. complete.
2
-
308.85
Providing and fixing IS : 3564 marked aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc. complete.
2
-
568.11
Providing & fixing chromium plated brass 100x72 mm mortice latch & lock with 6 levers & a pair of lever handles with necessary screws etc complete (best make of approved quality).
2
-
992.29
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62mm width and 32mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38mm x 4mm & PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
14
-
556.84
Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles and rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5mm PVC sheet as panel. The styles and rails shall be mitred cut and joint with help of PVC solvent cement and self tapping screws. Single piece extruded solid PVC rail of size 100mm x 30mm with wall thickness 5mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturer's specifications and direction of Engineer-in-charge
-
-
-
i) Non Decorative finish
14
-
3709.08
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length,jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire as per IS 4454 Part-I & M.S. top cover of required thickness for rolling shutters:- 80x1.25mm MS laths with1.25 mm thick top cover.
28
-
3387.72
Providing and fixing ball bearing for rolling shutters.
4
-
554.8
40mm Thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand:4 stone aggregate of 20mm nominal size) finished with a floating cement coat of neat including cement slurry, but excluding the cost of nosing of steps etc. complete.
18
-
530.37
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). TILES OF DARK SHADE USING ORDINARY CEMENT
28
-
1047.79
25mm Thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing wax polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
6
-
1693.94
Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness as specified by the manufacturer ) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade.
18
-
1089.41
Providing & laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
24
-
1006.84
Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand, including grouting the joints with white cement and matching pigments etc., complete for flooring/skirting as specified.
-
-
-
i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4
40
-
1637.33
Painting top of roofs with residual type petroleum bitumen of grade VG10 of approved quality at17kg per10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil complete.
80
-
149.93
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
-
-
-
ii) 110 mm diameter
20
-
345.71
Providing and laying cement plaster on surfaces with fine sand including curing etc.
-
-
-
iii) 15mm Cement plaster of mix1:4 (1cement: 4 fine sand) on rough side of half or single brick wall
100
-
292.9
Providing and laying cement plaster on surfaces with Coarse sand including curing etc.
-
-
-
ii) 12mm Cement plaster of mix1:6 (1 cement: 6 coarse sand)
160
-
246.1
Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc.
-
-
-
i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand)
80
-
210.33
Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
100
-
173.62
Applying one coat of cement primer of approved brand and manufacture on wall surface :
180
-
54.05
Finishing walls with Acrylic Smooth exterior paint of required shade with Two or more coat applied @ 1.67 ltr/10 sqm over & including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
120
-
140.49
Finishing walls with Deluxe Multi surface paint system for interiors &exteriors using Primer as per manufacturers specifications with two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm
120
-
144.73
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
40
-
164.26
Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
-
5110.91
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
i) W.C. pan with ISI marked white solid plastic seat and lid.
1
-
6719.21
Providing and fixing toilet paper holder :
-
-
-
i) C.P. brass
2
-
563.65
Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
ii)100mm inlet & 75mm outlet SCI S&S as per IS - 3989.
4
-
1569.17
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.
-
-
-
ii) 20 mm nominal outer dia .Pipes.
30
-
416.65
iii) 25 mm nominal outer dia .Pipes.
20
-
487.95
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.for WATER and AIR, External work.
-
-
-
i) B Class 15 mm dia. nominal bore
25
-
234.32
iii) B class25 mm dia. nominal bore
20
-
301.09
Providing and fixing brass bib cock of approved quality :
-
-
-
i) 15 mm nominal bore
5
-
380.44
Providing and fixing brass stop cock of approved quality :
-
-
-
i) 15 mm nominal bore
5
-
380.44
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
i) 25 mm nominal bore
1
-
626.32
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
i) 15 mm nominal bore
2
-
420.16
ii) 20 mm nominal bore
1
-
478.37
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1500
-
10.6
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
i) 100 mm diameter
9
-
316.31
ii) 150 mm diameter
9
-
478.37
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I.cover with frame of 300 x300 mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
i) 100x100 mm size P type with common burnt clay bricks of class Designation75
1
-
2343.81
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
ii) Inside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets with common burnt clay bricks of class designation 75
1
-
7996.06
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.with common burnt clay bricks of class designation 75
1
-
30250.59
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately.
-
-
-
i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections
108
-
562.4
iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
90
-
650.75
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
i) With float glass panes of 4.0 mm thickness
27
-
1084.58
iii) With float glass panes of 8.0 mm thickness
14
-
1687.79
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot & single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
i) With stainless steel cover plate
2
-
3004.94
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in- charge
-
-
-
i) Powder coated minimum thickness 50 micron aluminium
2
-
99.9
Providing & fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 25 of approved design/pattern, with approved standard section & fixed to the existing window frame with C.P.brass /stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment)
12
-
598.02
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc. to be paid separately).
18
-
6741.3
SALES BUILDING ELECTRIFICATION
-
-
-
PANEL BOARDS AND DISTRIBUTION BOARDS
-
-
-
Supply, installation, testing and commissioning of cubicle type power and motor control centre with six nos of LED type (RYB) indicating lamps, 3 Nos.of ammeters,1No. of voltmeter with selector switch, 3 Nos. of 100/5A CTs, control fuses, control wiring etc. and to be fabricated out of 16 SWG MS sheet undergone 7 tank process and painted with anticorrosive primer and two coats of enamel paint & having following specific components complete as per enclosed standard drawings: 125A FP SFCOS with 100A HRC fuse as incomer-1 No 125A TPN busbar chamber with Aluminium bus. 63A TPN SDFU with 50A HRC fuse as outgoings -3 Nos 63A 100mA RCBO (MCB+ELCB) - 2 Nos. 63A 300mA RCBO (MCB+ELCB) - 1 No. 6-32A SP MCB - 24 Nos. 10A DP MCB - 9 Nos. 25A TP MCB - 3 Nos. Dummy plates - 3 Nos.
1
-
231101.63
PROVIDING INTERNAL WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
35
-
899.55
Providing following point wiring with standard wire/ cable, plug, fittings, with suitable sockets, suitable GI box with front plate etc. complete, to include circuits from distribution boards to individual point boards, suitable PVC casing capping and required accessories pulling of wires, etc. complete.
-
-
-
Supplying and drawing following 2 pair 0.5 sq mm FR PVC insulated annealed copper conductor, unarmuored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
2
-
27.79
Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following. Make of Insulated wires shall be as per approved make
-
-
-
Sub-main/power wiring with PVC insulated Copper wire of 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire, as per specifications and direction of Engineer in Charge.
40
-
163.82
Sub-main/power wiring with PVC insulated Copper wire of 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire, as per specifications and direction of Engineer in Charge.
50
-
200.39
Sub-main/power wiring with PVC insulated Copper wire of 2 x 4 sq mm + 1 x 4 sq mm earth wire, as per specifications and direction of Engineer in Charge.
40
-
245.73
Sub-main/power wiring with PVC insulated Copper wire of 2 x 6 sq mm + 1 x 6 sq mm earth wire, as per specifications and direction of Engineer in Charge.
40
-
332.03
SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge.
-
-
-
S/F modular switch frame with 6 module frame, as per specifications and direction of Engineer in Charge.
4
-
377.37
S/F modular switch frame with 8 module frame, as per specifications and direction of Engineer in Charge.
4
-
434.42
S/F modular switch frame with 6A Modular Switch, as per specifications and direction of Engineer in Charge.
30
-
326.18
S/F modular switch frame with 6A, 3 Pin Modular Socket, as per specifications and direction of Engineer in Charge.
3
-
334.37
S/F modular switch frame with 15 A 6 Pin Modular socket, as per specifications and direction of Engineer in Charge.
2
-
413.35
SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge.
-
-
-
S/F modular switch frame with Fan Regulator of stepped modular type, as per specifications and direction of Engineer in Charge.
2
-
571.91
CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type:
-
-
-
1200 mm sweep
2
-
3000.22
EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan).
-
-
-
9" dia light duty, make Khaitan or equivalent
4
-
2196.06
12" heavy duty, make GEC or equivalent
1
-
2583.6
Supply and fixing Discrete LED Tube light of 18 Watt operating under voltage range of 140-277 V with power factor more than 0.9. CCT ( Corelated Color Temperature shall be 5700 Kelvin ( 5665 +/- 335K), CRI ( Color Rendering Index) not less than 65 and LED efficacy of minimum 100 Lumens/ Watt. The fitting shall conform to IP 65 protection class with under pressure die-cast Aluminium housing with 4 mm thick toughened glass. The driver shall be constant volt and constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification and as per direction of Engineer in charge.
8
-
905
Supply and fixing Discrete LED Tube light of 8 Watt operating under voltage range of 140-277 V with power factor more than 0.9. CCT ( Corelated Color Temperature shall be 5700 Kelvin ( 5665 +/- 335K), CRI ( Color Rendering Index) not less than 65 and LED efficacy of minimum 100 Lumens/ Watt. The fitting shall conform to IP 65 protection class with under pressure die-cast Aluminium housing with 4 mm thick toughened glass. The driver shall be constant volt and constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification and as per direction of Engineer in charge.
8
-
725
CONSTRUCTION OF DRIVER REST ROOM
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
50
-
184.23
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering, within premises and lift upto 1.5m
30
-
183.93
Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete
25
-
1342.38
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
8
-
8018.37
Providing & laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments,pillars,posts,struts, buttresses,string or lacing courses, parapets,coping, bed blocks, anchor blocks, plain window sills, fillets etc. UP TO FLOOR V LEVEL excluding the cost of centering, shuttering and finishing :
-
-
-
vi) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 40mm
8
-
8273.24
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes mixing water proofing material in cement concrete work @ 1 kg per 50kg of cement. Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil.
12
-
589.39
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
16
-
9091.1
Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars,piers, abutments, posts and struts etc.UP TO FLOOR V LVL excluding cost of centering,shuttering, finishing and reinforcement :
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
16
-
10452.05
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
100
-
283.69
iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ)
120
-
617.69
iv) Lintels, beams plinth beams,girders bressumers and cantilevers
80
-
501.55
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
2600
-
82.79
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
24
-
6950.17
iv) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand) in superstructure ABVOE PLINTH & UP TO FLOOR V LEVEL
12
-
8165.95
viii) Half brick masonry in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
8
-
868.1
Providing and laying Dry brick on edge flooring in required pattern with bricks of Class designation 75 on a bed of 12mm mud mortar including filling joints with fine sand complete.
20
-
754.75
Providing and fixing 100x85x5.5 mm (heavy type) bright finished brass butt hinges with necessary screws etc. complete :
18
-
237.61
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). TILES OF DARK SHADE USING ORDINARY CEMENT
30
-
1047.79
Providing & laying vitrified floor tile in different sizes (thickness as per manufacturer) with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar as specified with coarse sand, including grouting the joints with white cement and matching pigments etc., complete for flooring/skirting as specified.
-
-
-
i) Flooring with size of Tiles 60x60Cm in cement mortar 1:4
70
-
1637.33
Painting top of roofs with residual type petroleum bitumen of grade VG10 of approved quality at17kg per10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil complete.
70
-
149.93
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
-
-
-
ii) 110 mm diameter
20
-
345.71
Providing and laying cement plaster on surfaces with fine sand including curing etc.
-
-
-
iii) 15mm Cement plaster of mix1:4 (1cement: 4 fine sand) on rough side of half or single brick wall
120
-
292.9
Providing and laying cement plaster on surfaces with Coarse sand including curing etc.
-
-
-
ii) 12mm Cement plaster of mix1:6 (1 cement: 6 coarse sand)
200
-
246.1
Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc.
-
-
-
i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand)
60
-
210.33
Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
80
-
173.62
Applying one coat of cement primer of approved brand and manufacture on wall surface :
120
-
54.05
Finishing walls with Acrylic Smooth exterior paint of required shade with Two or more coat applied @ 1.67 ltr/10 sqm over & including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
200
-
140.49
Finishing walls with Deluxe Multi surface paint system for interiors &exteriors using Primer as per manufacturers specifications with two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm
200
-
144.73
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
60
-
164.26
Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
-
5110.91
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
2
-
5110.84
Providing and fixing toilet paper holder :
-
-
-
i) C.P. brass
2
-
563.65
Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
ii)100mm inlet & 75mm outlet SCI S&S as per IS - 3989.
4
-
1569.17
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.
-
-
-
ii) 20 mm nominal outer dia .Pipes.
40
-
416.65
iii) 25 mm nominal outer dia .Pipes.
40
-
487.95
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.for WATER and AIR, External work.
-
-
-
i) B Class 15 mm dia. nominal bore
20
-
234.32
iii) B class25 mm dia. nominal bore
20
-
301.09
Providing and fixing brass bib cock of approved quality :
-
-
-
i) 15 mm nominal bore
6
-
380.44
Providing and fixing brass stop cock of approved quality :
-
-
-
i) 15 mm nominal bore
6
-
380.44
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
i) 25 mm nominal bore
2
-
626.32
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
i) 15 mm nominal bore
2
-
420.16
ii) 20 mm nominal bore
1
-
478.37
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
ii) 150 mm diameter
2
-
125.64
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
i) 100 mm diameter
15
-
316.31
ii) 150 mm diameter
15
-
478.37
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I.cover with frame of 300 x300 mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
i) 100x100 mm size P type with common burnt clay bricks of class Designation75
1
-
2343.81
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
ii) Inside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets with common burnt clay bricks of class designation 75
1
-
7996.06
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.with common burnt clay bricks of class designation 75
1
-
30250.59
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately.
-
-
-
i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections
100
-
562.4
iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
80
-
650.75
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
i) With float glass panes of 4.0 mm thickness
18
-
1084.58
iii) With float glass panes of 8.0 mm thickness
14
-
1687.79
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot & single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
i) With stainless steel cover plate
4
-
3004.94
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in- charge
-
-
-
i) Powder coated minimum thickness 50 micron aluminium
6
-
99.9
Providing & fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 25 of approved design/pattern, with approved standard section & fixed to the existing window frame with C.P.brass /stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment)
25
-
598.02
DRIVER REST ROOM ELECTRIFICATION
-
-
-
PROVIDING INTERNAL WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
20
-
899.55
Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following. Make of Insulated wires shall be as per approved make
-
-
-
Sub-main/power wiring with PVC insulated Copper wire of 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire, as per specifications and direction of Engineer in Charge.
50
-
163.82
Sub-main/power wiring with PVC insulated Copper wire of 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire, as per specifications and direction of Engineer in Charge.
60
-
200.39
Sub-main/power wiring with PVC insulated Copper wire of 2 x 4 sq mm + 1 x 4 sq mm earth wire, as per specifications and direction of Engineer in Charge.
50
-
245.73
Sub-main/power wiring with PVC insulated Copper wire of 2 x 6 sq mm + 1 x 6 sq mm earth wire, as per specifications and direction of Engineer in Charge.
50
-
332.03
SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge.
-
-
-
S/F modular switch frame with 6 module frame, as per specifications and direction of Engineer in Charge.
6
-
377.37
S/F modular switch frame with 8 module frame, as per specifications and direction of Engineer in Charge.
6
-
434.42
S/F modular switch frame with 6A Modular Switch, as per specifications and direction of Engineer in Charge.
25
-
326.18
S/F modular switch frame with 6A, 3 Pin Modular Socket, as per specifications and direction of Engineer in Charge.
6
-
334.37
S/F modular switch frame with 15 A 6 Pin Modular socket, as per specifications and direction of Engineer in Charge.
6
-
413.35
SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge.
-
-
-
S/F modular switch frame with Fan Regulator of stepped modular type, as per specifications and direction of Engineer in Charge.
6
-
571.91
CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type:
-
-
-
1200 mm sweep
6
-
3000.22
EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan).
-
-
-
9" dia light duty, make Khaitan or equivalent
4
-
2196.06
Supply and fixing Discrete LED Tube light of 18 Watt operating under voltage range of 140-277 V with power factor more than 0.9. CCT ( Corelated Color Temperature shall be 5700 Kelvin ( 5665 +/- 335K), CRI ( Color Rendering Index) not less than 65 and LED efficacy of minimum 100 Lumens/ Watt. The fitting shall conform to IP 65 protection class with under pressure die-cast Aluminium housing with 4 mm thick toughened glass. The driver shall be constant volt and constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification and as per direction of Engineer in charge.
10
-
905
Supply and fixing Discrete LED Tube light of 8 Watt operating under voltage range of 140-277 V with power factor more than 0.9. CCT ( Corelated Color Temperature shall be 5700 Kelvin ( 5665 +/- 335K), CRI ( Color Rendering Index) not less than 65 and LED efficacy of minimum 100 Lumens/ Watt. The fitting shall conform to IP 65 protection class with under pressure die-cast Aluminium housing with 4 mm thick toughened glass. The driver shall be constant volt and constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification and as per direction of Engineer in charge.
15
-
725
CONSTRUCTION OF TOILET BLOCK
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
20
-
184.23
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidation each deposited layer by ramming and watering, within premises and lift upto 1.5m
10
-
183.93
Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete
12
-
1342.38
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
3
-
8018.37
Providing & laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments,pillars,posts,struts, buttresses,string or lacing courses, parapets,coping, bed blocks, anchor blocks, plain window sills, fillets etc. UP TO FLOOR V LEVEL excluding the cost of centering, shuttering and finishing :
-
-
-
vi) PCC 1 Cement:3 Coarse Sand:6 Graded Stone Aggregate 40mm
2
-
8273.24
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). Item includes mixing water proofing material in cement concrete work @ 1 kg per 50kg of cement. Applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil.
3
-
589.39
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
6
-
9091.1
Providing & Laying Reinforced cement concrete work in walls (Any thickness) including attached pilasters, buttresses, plinth and string courses, fillets,columns, pillars,piers, abutments, posts and struts etc.UP TO FLOOR V LVL excluding cost of centering,shuttering, finishing and reinforcement :
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
5
-
10452.05
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
25
-
283.69
iii) Suspended floors,roofs,landings,balconies, access platform and Shelves (Cast in situ)
45
-
617.69
iv) Lintels, beams plinth beams,girders bressumers and cantilevers
20
-
501.55
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
1500
-
82.79
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
5
-
6950.17
iv) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand) in superstructure ABVOE PLINTH & UP TO FLOOR V LEVEL
5
-
8165.95
viii) Half brick masonry in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
20
-
868.1
Providing and laying Dry brick on edge flooring in required pattern with bricks of Class designation 75 on a bed of 12mm mud mortar including filling joints with fine sand complete.
20
-
754.75
Providing and fixing 100x85x5.5 mm (heavy type) bright finished brass butt hinges with necessary screws etc. complete :
20
-
237.61
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogeneous fine cellular structure having smooth outer integral skin having 62mm width and 32mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38mm x 4mm & PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer's specification and direction of Engineer-in-charge.
24
-
556.84
Providing and fixing factory made 30mm thick door shutter made of solid PVC foam profile. The styles & rails shall be of size 75mm x 30mm having wall thickness 5mm. The styles and rails shall have one side wall thickness of 15mm integrally extruded on the hinge side of the profile for better screw holding power. The styles and rails shall be reinforced with MS tubes of size 33mm x 17mm x 1mm painted with primer, all four corners of reinforcement to be welded or sealed. Solid PVC extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5mm PVC sheet as panel. The styles and rails shall be mitred cut and joint with help of PVC solvent cement and self tapping screws. Single piece extruded solid PVC rail of size 100mm x 30mm with wall thickness 5mm & 15 mm integrally extruded in the middle of the lock rail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturer's specifications and direction of Engineer-in-charge
-
-
-
i) Non Decorative finish
12
-
3709.08
Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles including rubbing and cleaning etc. complete on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). TILES OF DARK SHADE USING ORDINARY CEMENT
14
-
1047.79
Providing & fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness as specified by the manufacturer ) of approved make in all colours,shades except burgundy,bottle green,black of any size as approved by Engineer-in-Charge in skirting,risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade.
35
-
1089.41
Providing & laying rectified Glazed Ceramic floor tiles 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours White, Ivory, Grey, Fume Red Brown, laid on 20mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement and matching pigments etc., complete.
25
-
1006.84
Painting top of roofs with residual type petroleum bitumen of grade VG10 of approved quality at17kg per10sqm impregnated with a coat of coarse sand at 60 cudm per 10sqm including cleaning the slab surface with brushes & finally with a piece of cloth lightly soaked in kerosene oil complete.
35
-
149.93
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
-
-
-
ii) 110 mm diameter
45
-
345.71
Providing and laying cement plaster on surfaces with fine sand including curing etc.
-
-
-
iii) 15mm Cement plaster of mix1:4 (1cement: 4 fine sand) on rough side of half or single brick wall
35
-
292.9
Providing and laying cement plaster on surfaces with Coarse sand including curing etc.
-
-
-
ii) 12mm Cement plaster of mix1:6 (1 cement: 6 coarse sand)
20
-
246.1
Providing and laying 6mm thick cement plaster on surfaces with fine sand including curing etc.
-
-
-
i) 6mm thick plaster of mix 1:3 (1 cement: 3 fine sand)
30
-
210.33
Providing and applying plaster of Paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete
75
-
173.62
Applying one coat of cement primer of approved brand and manufacture on wall surface :
70
-
54.05
Finishing walls with Acrylic Smooth exterior paint of required shade with Two or more coat applied @ 1.67 ltr/10 sqm over & including base coat of water proofing cement paint applied @ 2.20kg/10 sqm.
55
-
140.49
Finishing walls with Deluxe Multi surface paint system for interiors &exteriors using Primer as per manufacturers specifications with two or more coats applied @ 1.25 ltr/10 sqm. over and including one coat of Special primer applied @ 0.75 ltr / 10sqm
55
-
144.73
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
15
-
164.26
Providing and fixing water closet squatting pan (Indian type W.C.pan) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C.flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required -White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
3
-
5110.91
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P.flush bend with fittings & C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
i) W.C. pan with ISI marked white solid plastic seat and lid.
2
-
6719.21
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :
-
-
-
i) One urinal basin with 5 litre white P.V.C. automatic flushing cistern.
1
-
5110.84
Providing and fixing toilet paper holder :
-
-
-
i) C.P. brass
3
-
563.65
Providing & fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
ii)100mm inlet & 75mm outlet SCI S&S as per IS - 3989.
10
-
1569.17
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work including cutting chases and making good the walls etc.
-
-
-
ii) 20 mm nominal outer dia .Pipes.
50
-
416.65
iii) 25 mm nominal outer dia .Pipes.
40
-
487.95
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.for WATER and AIR, External work.
-
-
-
i) B Class 15 mm dia. nominal bore
30
-
234.32
iii) B class25 mm dia. nominal bore
30
-
301.09
Providing and fixing brass bib cock of approved quality :
-
-
-
i) 15 mm nominal bore
10
-
380.44
Providing and fixing brass stop cock of approved quality :
-
-
-
i) 15 mm nominal bore
10
-
380.44
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
i) 25 mm nominal bore
4
-
626.32
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
i) 15 mm nominal bore
4
-
420.16
ii) 20 mm nominal bore
4
-
478.37
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
ii) 150 mm diameter
3
-
125.64
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1500
-
10.6
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
i) 100 mm diameter
20
-
316.31
ii) 150 mm diameter
20
-
478.37
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I.cover with frame of 300 x300 mm size(inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
i) 100x100 mm size P type with common burnt clay bricks of class Designation75
2
-
2343.81
Constructing brick masonry chamber for underground C.I. inspection chamber and bends with 75 class designation bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20 mm nominal size) foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design :
-
-
-
ii) Inside dimensions 500x700 mm and 45 cm deep for pipeline with one or two inlets with common burnt clay bricks of class designation 75
2
-
7996.06
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks of class designation 75 and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.with common burnt clay bricks of class designation 75
1
-
30250.59
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions,at top, bottom & sides with with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/panelling, C.P. brass/stainless steel screws including fixing all complete as per drawing & the directions of Engineer-in-charge. (Cost of glazing or panels to be paid for separately.
-
-
-
i) Fixed Glazing with Powder coated aluminium (minimum thickness of powder coating 50 micron) sections
40
-
562.4
iii) For shutters of doors, windows & ventilators with Powder coated aluminium sections including providing fixing hinges/ pivots & making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
40
-
650.75
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
i) With float glass panes of 4.0 mm thickness
10
-
1084.58
iii) With float glass panes of 8.0 mm thickness
8
-
1687.79
Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot & single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
i) With stainless steel cover plate
2
-
3004.94
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in- charge
-
-
-
i) Powder coated minimum thickness 50 micron aluminium
2
-
99.9
Providing & fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 25 of approved design/pattern, with approved standard section & fixed to the existing window frame with C.P.brass /stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.(Only weight of grill to be measured for payment)
8
-
598.02
TOILET BLOCK ELECTRIFICATION
-
-
-
PROVIDING INTERNAL WIRING
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
15
-
899.55
Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following. Make of Insulated wires shall be as per approved make
-
-
-
Sub-main/power wiring with PVC insulated Copper wire of 2 x 1.5 sq mm + 1 x 1.5 sq mm earth wire, as per specifications and direction of Engineer in Charge.
30
-
163.82
Sub-main/power wiring with PVC insulated Copper wire of 2 x 2.5 sq mm + 1 x 2.5 sq mm earth wire, as per specifications and direction of Engineer in Charge.
40
-
200.39
Sub-main/power wiring with PVC insulated Copper wire of 2 x 4 sq mm + 1 x 4 sq mm earth wire, as per specifications and direction of Engineer in Charge.
30
-
245.73
Sub-main/power wiring with PVC insulated Copper wire of 2 x 6 sq mm + 1 x 6 sq mm earth wire, as per specifications and direction of Engineer in Charge.
30
-
332.03
SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge.
-
-
-
S/F modular switch frame with 6 module frame, as per specifications and direction of Engineer in Charge.
2
-
377.37
S/F modular switch frame with 8 module frame, as per specifications and direction of Engineer in Charge.
2
-
434.42
S/F modular switch frame with 6A Modular Switch, as per specifications and direction of Engineer in Charge.
20
-
326.18
S/F modular switch frame with 6A, 3 Pin Modular Socket, as per specifications and direction of Engineer in Charge.
2
-
334.37
S/F modular switch frame with 15 A 6 Pin Modular socket, as per specifications and direction of Engineer in Charge.
2
-
413.35
S/F modular switch frame with Fan Regulator of stepped modular type, as per specifications and direction of Engineer in Charge.
2
-
571.91
CEILING FANS Supply & fixing of ceiling fan for inside of the sales building of following type:
-
-
-
1200 mm sweep
2
-
3000.22
EXHAUST FANS Supply and fixing of exhaust fan including electrical wiring all shall be with per specification and direction of site In charge. The fans shall be with louvers / shutters. (The job does not include making suitable cut out in the wall for fixing the fan).
-
-
-
9" dia light duty, make Khaitan or equivalent
4
-
2196.06
12" heavy duty, make GEC or equivalent
1
-
2583.6
Supply and fixing Discrete LED Tube light of 18 Watt operating under voltage range of 140-277 V with power factor more than 0.9. CCT ( Corelated Color Temperature shall be 5700 Kelvin ( 5665 +/- 335K), CRI ( Color Rendering Index) not less than 65 and LED efficacy of minimum 100 Lumens/ Watt. The fitting shall conform to IP 65 protection class with under pressure die-cast Aluminium housing with 4 mm thick toughened glass. The driver shall be constant volt and constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification and as per direction of Engineer in charge.
6
-
905
Supply and fixing Discrete LED Tube light of 8 Watt operating under voltage range of 140-277 V with power factor more than 0.9. CCT ( Corelated Color Temperature shall be 5700 Kelvin ( 5665 +/- 335K), CRI ( Color Rendering Index) not less than 65 and LED efficacy of minimum 100 Lumens/ Watt. The fitting shall conform to IP 65 protection class with under pressure die-cast Aluminium housing with 4 mm thick toughened glass. The driver shall be constant volt and constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification and as per direction of Engineer in charge.
6
-
725
PROVISIONS FOR RAIN WATER HARVESTING
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
1.5
-
184.23
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
1
-
8018.37
Centering and shuttering including strutting, propping etc. and removal of form work for PCC
-
-
-
i) C&S for PCC in foundations,footings,bases of column
2
-
283.69
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
ii) Brick work in Cement mortar 1:6 (1 cement: 6 coarse sand ) IN FOUNDATION AND PLINTH
1.5
-
6950.17
Providing and laying Dry brick on edge flooring in required pattern with bricks of Class designation 75 on a bed of 12mm mud mortar including filling joints with fine sand complete.
2
-
754.75
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion, Single socketed pipes.
-
-
-
ii) 110 mm diameter
180
-
345.71
Providing & fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.
-
-
-
x) 87.5° Bend of 110 mm
45
-
165.43
Providing & fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work & fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
ii) 110 mm
30
-
265.33
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
2
-
59.82
Providing and laying cement plaster on surfaces with Coarse sand including curing etc.
-
-
-
ii) 12mm Cement plaster of mix1:6 (1 cement: 6 coarse sand)
1.5
-
246.1
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
5
-
164.26
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
2000
-
10.6
Supplying, drawing sub-main/power wiring with PVC insulated Copper 1100 V grade FRLS type through heavy duty rigid PVC conduit either on wall or in concealed. The job include terminations at both ends through proper jointing materials all complete for the following. Make of Insulated wires shall be as per approved make
-
-
-
Sub-main/power wiring with PVC insulated Copper wire of 2 x 16 sq mm + 1 x 16 sq mm earth wire, as per specifications and direction of Engineer in Charge.
75
-
596.78
SWITCHES, FUSES, MCBS, ELCBS ETC Supply and fixing of Modular switch frame with inner and outer face plates and accessories as per following details of approved including flush metal boxes/surface mounting boxes, plates, etc. all complete as per manufacturer's specification and direction of Engineer In-charge.
-
-
-
S/F modular switch frame with 6A, 3 Pin Modular Socket, as per specifications and direction of Engineer in Charge.
2
-
334.37
WATER PUMPS Supplying and installation of Water pump of approved make with starter of L&T or approved including Supply and providing G.I. Sheet cover with locking arrangement. The pump has to be installed as per manufacturer's specification.
-
-
-
1HP Jet
1
-
16905.44
Supply, fabrication, laying and testing of MS, BLACK, ERW, Welded pipes, heavy class conforming to IS 1239, PART I as per IOCL Specifications including pipeline fittings like bends, tee etc as required and as directed for Above Ground pipeline including painting 2 coats of red oxide zinc phosphate primer and 2 coats of Synthetic enamel / aluminium finish paint as per IOCL specifications
-
-
-
S/L Threaded A/G HD MS Pipes of 40 mm dia with fittings,Painting
80
-
591.51
YARD LIGHTING (8 NOS)/MAIN LINE
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
8
-
184.23
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
2
-
8018.37
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
6
-
9091.1
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
45
-
283.69
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
600
-
82.79
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge
280
-
236.69
Supply and Laying 3.5 Core x 50 sq. mm Aluminium Cable FRLS as per specifications and direction of Engineer in charge
50
-
424.32
FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Beluga/CEAG-FCG /Flexor/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F Cable termination for 3 Core x 2.5 sq. mm with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
8
-
458.87
P/F Cable termination for 3.5 Core x 50 sq. mm with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
2
-
1170.88
Providing and laying class-B 50mm dia GI pipe for cable routing under flooring/ EB post leading including sealing both ends with jute and Bitumen
80
-
611.07
Supplying and providing 100mm square Hansel weather proof junction box for emblem pole/ light pole/yard light
8
-
2376.69
Supply, fitting, fixing of arm bracket, tubular type, 38mm/50mm dia on pole including painting, all complete.
-
-
-
S/E Arm " L " bracket 38/50mm dia on pole , as per specifications and direction of Engineer in charge
8
-
1582.82
Supplying & drawing inside the poles 3 core 2.5 sq.mm PVC insulated flexible copper conductor, fixing of junction box at the pole base (excluding supply of JB), making all connections on both ends, all complete as per specification and direction of Engineer In-charge.
-
-
-
L Pole
8
-
1575.12
OCTAGONAL POLES Supply & Fixing of Octagonal Poles of following type (Civil job shall be paid separately) :
-
-
-
7 Meter high galvanized Octagonal pole with top 70mm (A/F), bottom bottom 130mm (A/F) made up of 3 mm thick plate having a base plate of size 220 x 220 x 12 with single arm 1500mm long bracket arm made up of 48 O.D. pipe with EN 8 grade galvanized foundation bolts and anchor plate on suitable concrete foundation as per standard drawings enclosed herein(Civil & Electrical works shall be paid separately) having fixing arrangement for mounting 2 Nos. of 250W Metal halide luminaries (on opposite sides)
8
-
17406.92
Supply and fixing of 100 w LED fixture with fittings and accessories for yard lighting purposes. The LED (Light Emitting Diode) of 100 Watt should be operating under voltage 290V AC (upper Limit) with power factor more than 0.9 CCT (Correlated colour temperature) shall be 5700 Kelvin (5665K+/-355K)CRI (Colour rendering index) not less than 70 and LED efficacy of minimum 140 lumens/watt. The fitting shall conform to IP65 protection class with under pressure die cast Aluminium housing with 4mm thick toughened glass. The luminaire system should have a minimum efficacy of 100 lumens per Watt. The driver shall be of constant volt & constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification attached and as per direction of Engineer in charge.
8
-
11900
FRONT LIT HOARDINGS
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
10
-
184.23
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
5
-
8018.37
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
30
-
283.69
Structural steel work riveted,bolted or welded in built up sections, trusses & framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:
1450
-
98.88
Providing and laying cement plaster on surfaces with Coarse sand including curing etc.
-
-
-
ii) 12mm Cement plaster of mix1:6 (1 cement: 6 coarse sand)
10
-
246.1
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade with two or more over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
90
-
164.26
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge
55
-
236.69
FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination(FLP):Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of FLP heavy duty double compression cable glands, Beluga/CEAG-FCG /Flexor/ FEPL make, crimping lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F Cable termination for 3 Core x 2.5 sq. mm with FLP double compression glands, lugs etc. as per specifications and direction of Engineer-in charge.
5
-
458.87
Supply, fitting, fixing of arm bracket, tubular type, 38mm/50mm dia on pole including painting, all complete.
-
-
-
S/E Arm " L " bracket 38/50mm dia on pole , as per specifications and direction of Engineer in charge
5
-
1582.82
Supply and fixing of 100 w LED fixture with fittings and accessories for yard lighting purposes. The LED (Light Emitting Diode) of 100 Watt should be operating under voltage 290V AC (upper Limit) with power factor more than 0.9 CCT (Correlated colour temperature) shall be 5700 Kelvin (5665K+/-355K)CRI (Colour rendering index) not less than 70 and LED efficacy of minimum 140 lumens/watt. The fitting shall conform to IP65 protection class with under pressure die cast Aluminium housing with 4mm thick toughened glass. The luminaire system should have a minimum efficacy of 100 lumens per Watt. The driver shall be of constant volt & constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification attached and as per direction of Engineer in charge.
5
-
11900
MONOLITH FDN. CIVIL & ELECTRICAL WORKS
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
15
-
184.23
Supplying and Local sand filling within the grading zone V of fine aggregates specified in table 3.1 , clause 3.1.3 of attached specifications, in plinth, under floors etc. in layers not exceeding 20cm in depth, each deposited layer to be compacted by ramming watering and dressing complete
1
-
1342.38
Providing and laying in position cement concrete of specified grade excluding cost of centering and shuttering - All work up to plinth level :
-
-
-
iii)1:2:4(1 Cement : 2 Coarse Sand :4 Graded stone aggregate of 20mm)
1
-
8018.37
Providing and laying in position specified grade of reinforced concrete excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
ii) RCC 1 Cement :1½ Coarse Sand: 3 Graded Stone Aggregate 20mm
6
-
9091.1
Centering and shuttering including strutting, propping etc. and removal of form for :
-
-
-
i) Foundations,footings,bases of columns, etc. for mass concrete
18
-
283.69
Supply of Reinforcement for R.C.C. including straightening, cutting, bending, placing in position & binding all complete at all levels
-
-
-
ii)Thermo Mechanically Treated Bars Fe- 500 grade,Conforming to IS1786
240
-
82.79
Providing and laying Brick work with bricks of class designation 75 Including Scaffolding :
-
-
-
viii) Half brick masonry in Cement mortar 1:4 (1 cement : 4 coarse sand) IN FOUNDATION AND PLINTH
1.5
-
868.1
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished) machine cut for kitchen platforms, vanity counters,sills,facias,Pump Island & similar locations of required size of shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement mixed with matching pigment,epoxy touch ups, including rubbing,curing moulding & polishing to edge to give high gloss finish etc. complete at all levels.
-
-
-
iv) Granite of any colour and shade having Area of slab over 0.50 sqm
1.8
-
4553.78
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall
-
-
-
vi) 50 mm nominal outer dia .Pipes.
1
-
802.36
Supplying and fixing MS foundation bolts with necessary GI nuts and washers of specified sizes,all conforming to relevant Indian Standards and as approved by Engineer-in-charge :
-
-
-
v) 25mm dia x 1000mm long with 100 mm dia x 8 mm thick plate
12
-
550.26
CABLING & ALLIED WORKS - ARMOURED CABLES Supply & laying of XLPE insulated PVC sheathed aluminium/copper conductor, 1.1 kV grade armoured cable conforming to IS:7098, as per approved make in ground/ trench/surface/pipe, etc. wherever required as per direction of Engineer In-charge. Note: The rate of Installation should be inclusive of Cable clamps, tags Saddles, Consumables etc. Trays/pipes, trenches, fabricated tray supports etc will be covered & paid in Separate Items
-
-
-
Supply and Laying 3 Core x 2.5 sq. mm Copper Cable FRLS as per specifications and direction of Engineer in charge
40
-
236.69
CABLE TERMINATION GLANDS NON-FLP HEAVY DUTY DOUBLE COMPRESSION Cable Termination (NON FLP): Providing termination of 1.1 kV grade armoured cable for the following sizes including supply of NON FLP heavy duty Double Compression cable glands, crimping type lugs and allied jointing materials, etc. all complete as per specification & direction of Engineer In-charge. Glands and lugs shall be of approved make. Copper lugs for copper cables and aluminium lugs for aluminium cables shall be used.
-
-
-
P/F cable termination for 3 Core x 2.5 sq. mm with Non FLP double compression glands,lugs etc. as per specifications and direction of Engineer-in charge.
2
-
403.51
Providing, fixing, testing and commissioning of FLP junction box of approved make for cable connection/ jointing.
-
-
-
For cables 2.5 to 4 sqmm XLPE / AYFY
1
-
1625.48
MINIATURE CIRCUIT BREAKERS (MCB) Supplying & fixing of Miniature Circuit Breakers as per approved make of 10KA Breaking capacity of following ratings
-
-
-
S/F Miniature Circuit Breakers of approved make of ratings 6A to 32A DP MCB, as per specifications and direction of Engineer in Charge
2
-
677.22
Supply and fixing of 100 w LED fixture with fittings and accessories for yard lighting purposes. The LED (Light Emitting Diode) of 100 Watt should be operating under voltage 290V AC (upper Limit) with power factor more than 0.9 CCT (Correlated colour temperature) shall be 5700 Kelvin (5665K+/-355K)CRI (Colour rendering index) not less than 70 and LED efficacy of minimum 140 lumens/watt. The fitting shall conform to IP65 protection class with under pressure die cast Aluminium housing with 4mm thick toughened glass. The luminaire system should have a minimum efficacy of 100 lumens per Watt. The driver shall be of constant volt & constant current type with internal surge protection. Supply of complete fitting with all accessories as per specification attached and as per direction of Engineer in charge.
2
-
11900
EARTHING WORKS
-
-
-
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth within and outside site to unobjectionable place, disposed earth to be levelled and neatly dressed.
-
-
-
i) All kinds of Soil
2
-
184.23
PROVISION OF EARTHING
-
-
-
Providing earthing with 80 mm dia,3.0 M long GI (Heavy duty) perforated pipe as per IS:3043 (with latest amendment) including providing suitable earth bus for interconnection, providing a mixture of salt & charcoal, making earth pit chamber with chequered plate cover as per standard Drwng. etc. all complete as per specif. & direction of Engineer-In-charge.
5
-
16835.56
Supply & drawing/laying, jointing, connecting, testing and commissioning of earth strip/copper strip/GI wire for earthing and lightning protection under or aboveground complete as per specification for the following :
-
-
-
Supply & Laying Earthing 50 x 10mm G.I. Strip as per specifications and direction of Engineer in Charge.
180
-
364.49
Supply & Laying Earthing 32 x 6 mm G.I.strip as per specifications and direction of Engineer in Charge.
320
-
142.93
Supply & Laying Earthing 8 S.W.G. G.I. Wire (bare) as per specifications and direction of Engineer in Charge.
210
-
35.56
Providing & fixing flexible copper cable PVC insulated of 16sqmm for connecting the earth grid/earth strip with the crocodile clip including cost of 1no.crocodile clip (for tanker earthing & other job)
8
-
931.76
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements