Western Railway Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Western Railway - WR Tender
Electrical and Electronics
Electrical Works
Ireps
Opening Date1 Apr 2025
Closing Soon22 Apr 2025
Tender Amount₹ 4,02,10,597.22
Technical
Technical
Financial
Additional Eligibility
Bid Capacity
... View More
Bid Capacity = (V/N) or V, whichever is less, where V = Advertised value of the tender in crores of Rupees and N = Number of years prescribed for completion of work.
Technical Capacity
... View More
The bidder must have successfully completed or substantially completed any one of the following categories of work(s) during the last 07 years: (i) Three similar works each costing not less than 30% of the advertised value of the tender, (ii) Two similar works each costing not less than 40% of the advertised value of the tender, (iii) One similar work costing not less than 60% of the advertised value of the tender. The similar nature of work must be approved by CSTE/Western Railway.
Costs
EMD
₹ 3,51,100Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Signalling Cable Shifting Work In Connection With Replacement Of Tss/sp/ssp In Virar-surat Section Of Mumbai Division In Connection With Raising Of Speed To 160kmph
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
SG_216_2_108_160Kmph-MUMBAI CENTRAL DIVISION-S AND T/WESTERN RLYTender No
SG_216_2_108_160KmphTender Authority
Western Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Pad locks Godrej make, Hardened NavTal 7 lever, 65mm Dia with common key or similar product having same feature & technical data. Inspection by Consignee
72
196
14168.88
... More
Miniature 'E' type lock complete with keys as per RDSO Drg. No. SA 3473, 3373 & spec. IRS(S) 30/64. Ward to be specified by Engineer - in - charge. Inspection by Consignee
72
2081
149869.44
... More
Maintenance Free Earth Electrode of length 3m, including supply of 3 bags of Earth enhancement material for earthling (10KGs /bag) for each electrode & other accessories as per Drg. No. SDO / RDSO/ E&B/001 and RDSO Spec No. RDSO / SPN/197/2008. Inspection by Consignee Consist o f (a) Copper bonded steel earth electrode of 3.0 meter long & 17.2 mm dia with Cu-bonding thickness of min. 250 - 1 no. (b) Earth enhancing compound (10 Kg/Bag) - 3 No. (c) Cu-strip 200 X 25 X 6 mm to terminate earth rod = 1no. (d) Cu-strip 300 X 25 X 6 mm (MEEB) = 1 no. Main equi-potential earth bus bar (MEEB) (e) Cu-strip 150 X 25 X 6 mm (SEEB) = 1 no. Sub equi-potential earth bus bar (SEEB) (f) PVC insulted multistring 35 sq.mm copper cable in double as per IS-694 - 20 Mtr. (g) PVC insulted multistrand 16sq.mm copper cable in double as per IS-694-20 Mtr (h) PVC insulted multistrand 10 sq.mm copper cable sq.mm copper cable in double as per IS-694 - 10 Mtr 7
-
-
6
... More
Supply of Fiber/ SMC/FRP/RCC Earth Chamber. Inspection by Consinee 8
36
649
23364
... More
Tic-tac Piano type Switches , 5A (ISI mark of reputed make) Inspection by Consignee
36
33
1201.32
... More
Lamp holder , two pin , Bakelite type for Apparatus Cases (ISI mark of reputed make) Inspection by Consignee
36
47
1723.32
... More
Flexible cable (Power wire), multi-strand copper conductor's cross section 25 Sq. mm (0.4x196) as per specn. IS 694/2010 with latest amendment, and test parameters as per IRS(S) 76/89. Inspection by RDSO
15
132505
1987576.8
... More
Supply and fixing Polyolefin cable channel of size width 240/340 mm, height 155/230 11 internal/external, length 1meter produced of polyolefin with fire protection class K-1 in accordance with DIN 53438 Part-II for laying signaling/telecom cables, channel attachable to each other with male female swallow tail connectors and having a suitable detachable cover, as per RDSO STS/E/cable laying Precise Vol-IV and as per technical specifications. Inspection by RITES.
5500
2178
11979660
... More
Supply and fixing of polyolefin cable channel (Injection Moulded Plastic cable Duct) of size width 100/200 mm, height 155/230 internal/external, length 1 meter produced of polyolefin with 12 fire, protection class K-1 in accordance with DIN 53438 part all for laying signaling/telecom cables, channel attachable to each other with male female swallowtail connectors and having suitable detachable cover including supply of all fixing materials like Brackets,etc. , as per RDSO STS/E/cable laying Precise Vol-IV and as per technical specifications. Inspection by RITES
2500
1900
4750200
... More
High density polyethylene pipes (HDPE) of 110 mm/125 mm outer Dia, 10 mm wall thickness, along with one coupler for every 6 Mtr. As per spec. No. Is 4984:2016 with latest amendments and material grade: PE 80. Inspection by RITES
1500
701
1051500
... More
Double Walled Corrugated (DWC) HDPE Pipe with associated collars etc. as per RDSO Specification No. RDSO/SPN/204/2011 or latest anti-rodent & anti-oxidant and non-flame propagating type in 6 meters straight length and of size 120 mm outer die,& 103.5 mm inner dia. . One of the 14 following coupling arrangements should also be supplied with each pipe as per the site requirement. 1) Suitable snap fit coupler with rubber 'O-Ring 2) Spacers 3) Tees 4) Bend, 5) End-cap (The total quantity of above items is equal to no. of pipes supplied.) DWC pipe shall be marked at every 1 mtr length in such a way that manufacturer's name, vender name and year of manufacture can be easily identified. Color -Bright Orange; Min Weight = 4kg. Test Check by Consignee & Sample check by JAG officer.
20
1912
38244
... More
Medium Class G.I. Pipes to IS: 1239 (Pt.)-2004 or latest; 100mm dia. (int. Dia) 3.65 mm thick or above with coupling. G.I. pipes shall have ISI mark on it and contractor should submit manufacturer's test certificate of G.I. pipes. Inspection by Consignee
20
1170
23405.6
... More
Excavation and Casting of Apparatus Case foundation with contractor's own materials 1 including cement and anchor bolts of standard size. The required scaffolding Ferma etc. for Casting of foundation will have to be brought by the contractor at his own cost.Single Case as per Drg No SK 748 or CSTE/5074 or SSLocation
20
7162
143252.6
... More
Excavation and Casting of Apparatus Case foundation with contractor's own materials including cement and anchor bolts of standard size. The required scaffolding Ferma etc. for Casting of foundation will have to be brought by the contractor at his own cost.Half Case as per Drg No SK 747or CSTE/5074 or SSLocation.
-
-
2
... More
Installation of Apparatus Cases with miniature 'E' type lock on CC foundation. This includes filling of location foundations with river bed sand and plastering on top of the sand. 'E' Type lock will be provided by Railway. Single Case
20
1076
21525.8
... More
Installation of Apparatus Cases with miniature 'E' type lock on CC foundation. This includes filling of location foundations with river bed sand and plastering on top of the sand. 'E' Type lock will be provided by Railway.Half Case
16
657
10514.4
... More
Fabrication and fixing of SMC sheet in location box by providing all fixtures as per 5 Railway Drawing including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per Drg and arrangement similar to SK 783-1/2. With latest alterations & as per instructions of Rly engineer at site. Note: SMC sheet will be taken in place of phenolic laminated sheet. Single Case
20
2445
48907.2
... More
Fabrication and fixing of SMC sheet in location box by providing all fixtures as per 6 Railway Drawing including fixing of PVC coated string rods at the back side for cable support with contractor's own materials. The work shall be done as per Drg and arrangement similar to SK 783-1/2. With latest alterations & as per instructions of Rly engineer at site. Note: SMC sheet will be taken in place of phenolic laminated sheet. Half Case
16
777
12444.48
... More
Preparation and fixing of location box board on 03 mm ACP sheet with size 12 x 18 size A3 for location box including pasting of printed/ painted vinyl sheet and lamination (printing/painting of location detail on vinyl sheet covered in schedule item separately).
36
239
8630.28
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. This includes supply of paints of Asian Paints/ Nerolac / Dulux / Berger make. Full Case.
20
129
2585.2
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. This includes supply of paints of Asian Paints/ Nerolac / Dulux / Berger make. Half Case.
16
88
1410.88
... More
Fixing of ARA Terminals /Screw less connectors and fuse blocks on phenolic laminated sheets and fixing by stainless steel/brass nuts & bolts. This includes provision of two additional holes on the board on either side for cable conductor entry.
11200
22
254800
... More
Termination of outdoor cables, main cables laid in location boxes, Cable termination rack etc. at both ends on ARA terminal or on 8 way terminals or on screw less connectors. Both ends 11 of a cable core terminated shall be counted as one terminal. This includes all associated works of pulling out the cable from underground, peeling off insulation, dressing of cable core supported on sting rod with contractor's own material. The work shall be done as per instructions of Rly engineer at site.
11200
23
265440
... More
Installation of Maintenance Free Earth Electrode for Maintenance Free Earth spec of RDSO/SPN/197/2008. i. TAN 3006 ver 3.0 on Earthing , Bonding, Surge & Lightning Protection System for S&T Installation. Reg. to be follow. ii. The OEM shall be responsible for complete supply, installation 12 & commissioning of the Earthing & Bonding system. iii. The Pre-commissioning checklist shall be followed during installation. This has been reiterated by this office letter no. RDSOSIG0EnB(GEN)/1/2020 dt. 18.07.2024 and also included in guidelines for earthing, bonding, surge and lightning protection issued on 01.01.2025. iv) OEM Certificate shall be obtained from OEM, after the installation of Earthing & Bonding system. Warranty of such system shall be 60 months from date of commissioning.
36
1456
52444.44
... More
Transferring of Signaling/Telecom cables from existing Location box to New Location box . Note: Proportionate payment will be made if cable of other length. One No unit = One cable of 10 m length)
90
335
30202.2
... More
Excavation of cable trench as per cable route plan, 1 Mtr. deep and of 0.3 Mtr. to 0.6 Mtr wide advised by Engineer-in-charge alongside the track in normal (all type) soil/strata, conforming 14 to distances as per cable route plan and refilling. This work includes clearing of route from bushes etc., covering of cable laid in trench by loose soil for a layer of 50mm thickness approximately before covering by bricks. The work shall be done as per the extant practice on Western Railway and instructions of Railway Engineer at site. In case 1m depth of trench is not achievable due to site conditions, specific approval of JA grade officer will be required for each site where trench depth of 1m is not possible. Without the approval of JA Grade officer, no payment for trenching will be made for trench depth less than 1m.
2600
839
2181400
... More
Digging of trench 1.2 M deep from rail flange/ road level and, 0.3 Mtr to 0.6 Mtr wide 15 and back filling after placing of DWC/ RCC/GI pipe. (Placing of DWC/RCC/GI pipe covered separately).The ballast disturbed be screened and dressed as required by Engineer-in-charge or his representatives and road tarred immediately. For track crossing, Drg. No.CSTE/3644 Pg.7 of 11 and for Road Crossing, Drg. No. CSTE/3644 Pg. 5 of 11 are to be followed.
100
873
87393
... More
Digging of cable trench 0.3 Mtr. Deep and 0.3 Mtr. Wide on Asphalted Platform / Road / Hard rocky area. Refilling with earth leveling of trenches & restoring the original surface of trenches.
60
512
30765.6
... More
Horizontal direction drilling/boring without damage of surface road using Auger Machine. The bore shall be 150 mm Dia & shall be done at the depth of minimum 1200 mm from the 17 ground level. The ground level shall be considered ignoring the bank height of the bank of the road. The length of the bore shall be minimum 4 Mtr long. The HDD with or without HDPE pipe as per direction of Engineer In charge. Note: HDPE pipe supply is taken as separate item. This item also includes cable laying (HDD boring).
1500
1187
1781775
... More
Digging of cable pit (min2x2x1m) as per instruction of Site Engineer, supplying and filling of sand before and after coiling the cables, covering top of the cable pit with stones and providing brick masonry on all four sides of the cable pit and plastering thereafter.
2
12567
25135.66
... More
Placing of DWC/RCC/HDPE pipes along with collars in trenches at places of track and road crossings, platform cuttings etc. also for straight cable laying. (Cable laying is covered separately.)
1620
33
53816.4
... More
Laying and fixing of Medium class GI pipes 100 mm Dia (4.5 mm thickness) as per IS 1239 ( Part 1) 2004 or latest with coupling on culverts/bridges, perforated at a distance of 20 cm or 20 less with 10 mm Dia hole, or at any other locations as decided by Site Engineer. The GI pipe is to be filled with chattered compound. It includes supply of all material required for fi Xing arrangement. Contractor will also supply flexible/corrugated HDPE pipe at the end of GI pipe to protect the cables from sharp edges and sudden bends. The e laying and fi Xing to be done as per RDSO drawings No. SDO/cable laying/011 and SDO/cable laying/012, issued vide RDSO document No. RDSO/SI/G/2010 Version 1.1 dated 04.02.2014, or latest.
20
418
8361.4
... More
Laying of S&T Cables of various cores/ pairs/ quads in trenches/ GI pipes/ RCC pipes/ 21 DWC pipes/ Trucking. This also includes laying of cables in track crossings & road crossings. Item includes provision of labels of colored plastic adhesive tapes or any other identifiable material on each cable to give the cable number at each G.P.(Cables will be daggered before and after its laying by contractor under supervision of Railway Representative and he will submit the meggering report of each testing). Length of the cable laid includes the length of the cable coiled for termination purposes.
158000
9
1480460
... More
Removal of Rail (13 mtrs.) in the way of cable route. In case of panel (39 Mtrs. Each) will be consider as three rails for payment purpose. 23
20
110
2212.6
... More
Removal of PRC Sleeper in the way of cable route.
20
123
2470.2
... More
Supply and Installation of White Zink plated MS channel of size 100x50x1.2mtr.long along with fixing Hardware.
1500
1687
2531100
... More
Supply of SS 304 Troughing with cover of size 150x300x 2.5 mtrs. long and 1.0 mm Thk. Along with fixing clamp and necessary Hardware.
1500
4318
6478200
... More
Releasing of Old channel & Troughing & Installation of SS Troughing with cover on bridge
-
-
27
... More
Printed PVC Ferrule FOR CTR / Locatiob Box And Junction Box (Colour coding and Ferrule counting provided by customer) Size: 50mm as per instructions of Engineer incharge
11200
4
49616
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%