Western Coalfields Limited Tender

Centering and shuttering including strutting, propping etc.and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.

Filling available excavated earth (excluding rock) in trenches, plinth. sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift

Brick work with clay flyash F.P.S. (non modular) brick of class designation 7.5 in superstructure above plinth level up to floor five level in :Cement mortar 1:6 (1 cement : 6 coarse sand)

12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand)

Colour washing such as green, blue or buff to give an even shade : New work (two or more coats) with a base coat of white washing with lime

Steel reinforcement for R.C.C. work including straightening, cutting,bending, placing in position and binding all complete upto plinth level.Hot rolled deformed bars

Providing & fixing MS Fabricated portable office cabin with complete insulation,electrical & plywood claddings including transportation charges from factory to working site.size 10'x10'x8.5'as detailed below. 1. Bottom frame.100*50mm formed MS square pipes of 3mm thick & ISI marked MPL 2 Stiffener Bottom.80*40mm & 50*50mm square pipes ISI marked MPL 3 Top Frame:Frame made of 50x50mm square pipes ISI Marked MPL. 4 Stiffener Top:50x50mm,25x50mm & 25x25mm square pipes ISI marked MPL. 5 Side wall Stiffeners:Corner post shall be of 50x50mm L Angel,25x50mm square pipes & wall thickness of 60mm ISI Marked MPL 6 Paneling Outside:MS sheet specially corrugated 1.2mm thick sheet welded on MS frame.Jindal/Essar/Tata. 7 Internal wall paneling : The paneling of side walls and roof shall be of 9mm thick pre laminated praticle board (MDF) & all verticle and horizontal corners shall be neatly & smothly finished with aluminum sections 8 Roof outside : 1.2mm side thick MS sheet protect sloping & water tight protect from antirust with Gutter system jindal/Essar/tata 9 Bootom Flooring : On the bottom frame 18mm thick bison panel i.e cemented bonded fiber sheets VISAKA INDUSTRIES shall be fixed by means of self - taping screw & 1.5 mm thick PVC vinly carpet shall be fixed on panel ( 100% water termit & dimension proof with vinly carpet ) 10 False ceiling : 9mm thick MDF of make all vertically and horizontal corners will be neatly and smoothly Finished with aluminium section and angles 11 Aluminium sliding windows size : 4 * 3 - 2 no's with safety grills : double shutter sliding aluminium powder coated windows with 4mm thick glass for all windows , safety grills from outside & conopy on the top of windows 12. Main Doors Size 7*3 -- 1no's : The doors shall be of external opening type made out of the same material as wall panels & canopy above the door frame work by tubular pipe of 25*25 & the doors interior shall be finished with same material matching with that of the of the cabine interior . Door with std hardware locks & handles 13 Insulation : 25mm thick glass wool density of 64 kg/m3 with insulation for top & 25 side wall, to avoid heat 14 Wiring : all wiring shall be concealied and shall be PVC initable copper wires of ISI quality , suitable for vote 50 HZ single phase AC power (B) Electrical fittings All electrical fittings in the portable cabin shall be 220-240V 1 Tube light 2 nos (bajaj/orient/syska) 2 Bulk head door light -1nos 3 Cabin Fans -1nos 4 3pin socket with switchboard-2nos maru 5 A/C provision -1nos 15 Outside painting:All components are painted with a coat of primer & 2 coats of corrosion free paint i.e synthetic epoxy paint. 16 Hooks: Specially formed for easy lift & shift.

Total impact of GST for the purpose of CTC