Western Coalfields Limited Tender

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S.15622,of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1cement: 3 coarse sand), jointing withgrey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.Size of Tile 1000x1000 mm

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size derived from natural sources).

Carriage of material Building Rubbish , Earth including loading , unloading & stacking lead 1.00 Km

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a primingcoat of approved steel primer all complete

Providing corrugated G.S. sheet roofing including vertical /curved surface fixed with polymer coated J or L hooks,bolts and nuts 8 mm diameter with bitumen andG.I. limpet washers or with G.I. limpet washers filled with white lead,including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80 mm thick with zinc coating not less than 275 gm/m²

Finishing walls with Acrylic Smooth exterior paint of required shade : Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Distempering with 1st quality acrylic distemper (ready made) having VOC content less than 50 gm per ltr. Of approved manufacturer and of required shade and colour complete. as per manufacturer's specification One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink without drain board 610 x 460 mm bowl depth 200 mm

Providing andfixing in position(asper1868/1982)Aluminium sliding window ofthreetrackswithrectangularpipe95x38.10x0.90mmatweight0.637Kilogram/Runningmetre.withwindowframebottomtracksection92x31.75x1.30mmatweight1.070Kilogram/Runningmetre..Topandsidetracksection92x31.75x1.30mmatweight0.933Kilogram/Runningmetre.Theshuttershouldbeofbearingbottom40x18x1.25mmatweight0.417Kilogram/Runningmetre.Interlockingsection40x18x1.10mmatweight0.469Kilogram/Runningmetre.andhandleandtopsection40x18x1.25mmatweighto.417Kilogram/Runningmetre.AsperdetaileddrawingsandasdirectedbyEngineerinchargewithallnecessaryAluminiumsectionsfixturesandfasteningssuchasrollerbearinginnyloncastingandselflockingcatchfittedinverticalsectionofshutterincluding5mmthickplainglassandaluminiummosquitonetshutterwithstainlesssteeljailwithallrequired screws and nuts etc, complete. With powder coating without box

Total impact of GST for the purpose of CTC