Western Coalfields Limited Tender

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1 cement : 4 fine sand)

Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface

Letter writing, picture painting including base coat and cost of all materials,oil paint, sundries etc. All complte as per direction of the enineer in charge

Demarkation of line with lime including cost of all materials & labour as per instruction of the Engineer - in - charge

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil.

Providing and fixing G.I. pipes complete with G.I. fittingsincluding trenching and refilling etc. External work 25 mm dia nominal bore

Providing and fixing PTMT bib cock of approved qualityand colour.15 mm nominal bore, 122mm long, weighing not less than 99 gms

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC)pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings Thisincludes jointing of pipes & fittings with one step CPVCsolvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. Externalwork 32 mm nominal dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal outer dia Pipes

Providing and placing on terrace (at all floor levels)polyethylene water storage tank, IS : 12701 marked, withcover and suitable locking arrangement and makingnecessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Centering and shuttering including strutting, propping etc. and removal of form work for : Foundations, footings, bases for columns

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400mm.

Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 31 mm dia of 79 mm length and 62mm breadth weighing not less than 45gms.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 15 mm nominal bore with 45 cm length.

Providing and fixing PTMT pillar cock of approved quality and colour. 15 mm nominal bore, 107 mm long, weighing not less than 110 gms

Providing and fixing gun metal gate valve with C.I. wheel ofapproved quality (screwed end) :25 mm nominal bore

Providing and fixing gun metal gate valve with C.I. wheel ofapproved quality (screwed end) :50 mm nominal bore

ProvidingandfixingMandatory/Regulatorysignboardsincircularshapeof___mmdiamadeoutof____mmaluminumsheetbondedwithwhiteretroreflectivesheetingofClassC(TypeXIMicroprismaticgradesheeting)havingpressuresensitive/heatactivatedadhesiveretoreflectivespecifiedbackground,borderandbacksideretoreflctivesymbols,letters,numerals,arrowasperIRC:67-2012TableNo8.3Supportedwithbacksupportframe25mmx25mmx3mm,dulypaintedonbacksidewithgreystoveenamelpaintandsupportedononeno.ofM.S.angleironpostofsize65mmX65mmX6mm,3.45mlong,dulypaintedwithwithflatoilpainthavingalternateblackandwhitebandsof25cmwidthincludingG.I.fixturesetc;fixingtheboardsinM25gradeconcreteblockofsize60cmX60cmX75cmincludingtransportationetc;complete.ClassC(TypeXIMicroprismaticgradesheeting)shallhave10yearswrittenwarrantyfromthemanufacturerandauthoriseddistributor/convertorissuedforfieldperformanceincludingthescreenprintedareasandcut-outsheetingandcut-outdurabletransparentoverlayfilmandthiswarrantycertificateinoriginalshouldbesubmittedtotheEngineerinchargebythecontractor/supplier.600 mm dia made out of 1.5mm aluminum sheet

Total impact of GST for the purpose of CTC