Skill Development And Entrepreneurship Department Tender

Display Type Digital Accuracy (%) Grater than 1.0Percent (F. S). Supply AC Control With the help of Manual Auto Transformer (according to customer demand) Current Source 10 to 200 Amp (according to customer demand). Condition New Measuring Isolated CT for current output, digital Voltmeter for voltage output Output Power 6.0V (according to customer demand). Up to 15kva Protection a) Overload b) Open circuit c) Over temp. Timer Control Circuit Modes 0.001 to 99999ms, Accuracy 0.1 Percent of reading Plus minus1ms Warranty 1 Year against manufacturing defects & Extended optional. Input voltage Single phase 230V AC, 50Hz Protected with MCB & HRC fuse , or as per customer demand Operation time 1min ON, 5mins OFF. External Current Meter range 100A to 200 A, Accuracy 1 Percent of reading, Plus minus 20 mA Timer Stop Input Voltage input (24 to 300 V, DC or peak AC), dry contact input, or removal of primary current

Shaded Pole Motor Fractional HP, 240 V, 50 Hz

1) Capacity 35 to 40 Stator Per Day 2)Counter Type 3 Digit FRD 3) Stator Diameter 105mm to 165mm 4)Frequency 50 Hz 5)Wire Gage 30 to 406)Winding Direction Clockwise7) Phase Single with speed control 8)Motor 1/4 H.P. Single Phase 220v.AC 9) Power Supply 220v.AC 10)Machine Type Automatic 11) Dimensions 810mm x 280mm x 1500mm 12) Standard accessories a) all Standard Dies and stand b) Wire guides d) Spool container with tensioner mounting stand INSTRUCTIONS : A) OPERATING MANUAL WITH CIRCUIT a)DIAGRAM MUST BE PROVIDED. b)) PRACTICALS LIST TO BE PERFORMED SHOULE BE PROVIDED.WITH CIRCUIT DIAGRAM c) CONTROL BOARD SHOULD BE FITTED WITH NUT & BOLT PROPERLY AT THE INSTITUTE TO PERFORM PRACTICALS AT MANHEIGHT LEVEL FOR TRAINEE’S SAFTY