Rural Development Department Tender

Item No 4 :- Spreading oversize 40 mm/ 50mm/ 60mm/ 80mm metal including sectioning etc. complete. Circular No.3/5 + 10% hilly area = 52.00 +5.20 = 57.20

Item No 5 :- Spreading hard murum for side width etc. complete. P/I - 23/2.30 + 10% hilly area = 49.00 + 4.90 = 53.90

Item No 6 :- Compacting the size metal (100mm loose) layer up to 2.0 mt.to 7.00 mt Width with static roller, including necessary labour, materials and artificial watering etc. complete. Circular No.5/9 + 10% hilly area = 26.00 + 2.60 = 28.60

Item No.7 :- Providing and constructing 50 mm. thick Modified Penetration Macadam (MPM) road surface including all mataerials, preparing the existing road surface, spreading 40mm. stone metal layers 30% crusher broken metal + 70% Hand broken (by breaking rubble obtained by blasting) heating and spraying the bitumen of VG-30 grade @ 1.75 kg/sqm, spreading 12mm.size chips compacting with static roller having weight 8 to 10 MT. to achive the desired degree of compaction as per Technical Specification Clause 506 etc. complete. Including picking of existing WBM surface. P/I - 30/3.37. (R. A )

Item No.8:- Providing 20mm thick premix bituminous carpet including supplying all materials, preparing and cleaning the base, heating bitumen applying tack coat at specified rate, mixing hot bitumen and chips,laying the carpet layer and compacting etc.complete. By Bulk Asphalt. 60 /70 grade (excluding tack coat)( cold mix with C E (M) approval) (S.E.Circular No.4) (R. A)

ItemNo.9:- Providing bituminous Type A liquid seal coat on bituminous surface including supplying all materials and bitumen of VG-30 grade preparing existing road surface, heating and applying bitumen @ 0.98 KgSqm. by mechanical means, spreading chips and rolling, by static roller having weight 8 to 10 MT.etc complete. P/I - 35/4.01(R.A)

Item No.10:- Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of Contractor, Work completion and liability period etc', having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of Zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. Spec. No. As directed by Engineer in Charge. P/I - 79/6.96 + 10% hilly area = 2610.00 + 261.00 = 2871.00

Item No.11 :- Amount of material testing charges as per frequency. (As per chart)1) 40mm Metal Hand broken - Sieve analysis

2. 40 mm metal -Sieve analysis

3. 12 mm metal -Sieve analysis

4. 10 mm metal -Sieve analysis

5. 6 mm metal -Sieve analysis

6. Aggrigate - Water Absorption, Specific gravity, Impact value/Crushing value

7. Bitumen - Penetration, Softening point, Flash and Fire point, Specific gravity

8. Bitumen - Exctraction

Item No.12 :- Amount of Royalty charges. (As per chart)