Rural Development Department Tender

Spreading gravel/ sand/ soft murum/ hard murum or kankar for side width etc complete. MORTH 408 S.S.R. I.No. 2.30 Page. No.23.

Compacting the sub grade/ gravel/ 60 mm. oversize metal (upto 200 mm. loose) / 40 mm. size metal (100 mm. loose) layers upto 2 m. to 7 m. wide with power roller having weight 8 to 10 MT including necessary labour, materials and artificial watering etc. complete as directed by Engineer in charge. Spec. No.a s directed by engineer in charge S.S.R.I.No. 50.59

Providing and laying cast in situ / Ready mix , cement concrete in M 10 of trap/ granite/ quartzite/ gneiss metal in foundation including bailing out water, form work, compacting, roughing them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reverisble drum type mixer/concrete batch mix plant (pan mixer) etc complete finishing if required and curing etc. complete. BR 5 Page. No. 15 and B 7 Page No. 38 S.s.R. I.No. 12.25 Page. No. 97.

Providing and laying Caste in situ/ready mix cement concrete in M15 of trap/granite/quartzite /gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc complete. the cement mortar 1:3 plaster is considered for rednering uneven and honeycombed surface only. newly laid concrete shall be covered by gunny bag, plastic tarpaulin etc. (wooden centering will nto be allowed) with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc complete. with fine aggregate (natural sand /crushed sand VSI( grade finely washed etc ) S.S.R. I.No. 24.08 Page. No.223

Providing and fixing board displaying information, such as 'Name of work, Tender cost, Name of contractor, work completion and liability period etc, having rectangular shape of 1.20 m x 0.90 m size made out 18 gauge (1.25m) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbos etc with approved colour shade paint complete, on M.S. angle of size 3 x 35 x 3 mm frame with properly cross braced M.S angle of size 35 mm x 35 mm x 3 mm duly painted including two M.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling transportatiion, and labour etc complete Spec. No. As directed by engineer in charge MORTH 801 S.S.R. I.No. 6.96, Page. No. 79.

Royalty charges

Providing Quality Control Test - QC WBM material all test

Providing Quality Control Test - M -10 cubetest 2 No.

Providing Quality Control Test - M -15 cubetest 2No.

Add for 0.5% SQM charges

Add for 1% Insurance charges