Pune University Tender

Providing and fixing CONFERENCE Table in Burma Teak 1” thick size table top having carved legs in 3 dimensional with footrest & support for table top, facia mouding around pheriphery of the table inclusive of material, labour, joinery, Moulding 3” and beading 1” , finished with melamine polish as per existing Sample available at main building with finishing to satisfaction of Engineer -incharge, wooden foot rest, leveling screws, necessary slot in table top as directed by engineer in- charge if instructed or as per existing table in shivaji hall of main building for each individual seaters A) Burma teak wood - nearly matching to existing burma teak wood in the main building at SPPU. B) Commercial plywood - as per approved make list. C) 6 modules popup box in brass material of Legrand or any other equivalent with provision for plug point & LAN /data cable for indivisiual seating. Conference Table size 20' X 7' X 31.5" (Ht) Table top thickness-1" Table in 2 pieces of size 10' X 7' each Total 34 legs of size 4"x4" Footrest of size-3"x2" Decorative facia-4"x2"

Providing and fixing VC CHAIRS in BTC Teak from 3” x 2” section with 3 dimensional carved legs and exposed parts should be frame in one piece each without cuts or joints except joinery at junctions. High density Foam filling of 40- 45kg/cum, covering with light cotton fabric for seat, backrest and armrest,necessary wood carving on top of back frame shall be done as per Sample available at main building. Prior sanction / approval needed from Engineer In-charge inclusive of DECORATIVE HEADBOARD WITH UNIVERSITY LOGO EMBOSSED IN BRONZE, Beading 0.5”x0.75”, buttons, cleats, rubber studs to protect the flooring, finished with melamine polish etc complete. See sample of existing VC chair for seat and back. A) Burma teak wood - nearly matching to existing burma teak wood in the main building at SPPU. B) Fabric - D DECOR quality milden B,shade -14 Design F10444 Sr.no.37 C) Commercial plywood - as per approved make list. Sizes - Seat 24" x 20" outer Backrest top 52" (logo) above GL.Legs - 3"x2" Seat frame -3"x2" Back rest frame 3"x2"

Providing and fixing CHAIRS in BTC Teak from 2” x 2” section with 3 dimensional carved legs and exposed parts should be frame in one piece each without cuts or joints except joinery at junctions. High density Foam filling of 40-45kg/cum, covering with light cotton fabric for seat, backrest and inclusive of all Beading 0.5”x0.75”, buttons, cleats, rubber studs to protect the flooring,finished with melamine polish etc complete.See existing Sample available at main building for seat and back. A) Burma teak wood - nearly matching to existing burma teak wood in the main building at SPPU. B) Fabric - D DECOR quality milden B,shade -14 Design F10444 Sr.no.37 C)Commercial plywood - as per approved make list. Sizes - Seat 22" x 20" outer Backrest top 39" above GL Legs - 2"x2" Seat frame - 3"x2" Back rest frame 3"x2" Arms - 3"x2"