Pune University Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Pune University Tender
Eprocure
Opening Date9 Oct 2020
Closing Date24 Oct 2020
Tender Amount₹ 1,48,91,221
Costs
EMD
₹ 1,50,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2020_UOFP_615420_1Bid Award Id
ViewTender No
2020-21/UoP/Estate/EEP/01Tender Authority
Pune University ViewPurchaser Address
-Website
http://www.unipune.ac.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete.
200
-
724.45
... More
Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete.
50
-
1637.3
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.
25
-
4969
... More
Providing and laying Cast in situ/ Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for steps including steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface, only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), without fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
50
-
5736.7
... More
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
341.39
-
800
... More
Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C.coping to plinth or parapet and sill of doors and windows moulded as per detailed drawings or chamfered as approved by the Engineer including steel centering, formwork, cover blocks, laying/pumping, compacting , curing , finishing and roughening them if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC without SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)
20
-
6560.1
... More
Providing and fabricating structural steel work in rolled sections like joists, channels, angles, tees & round/square bars, flats, M.S. Tubes, etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixing in position making riveted / bolted /welded connections without connecting plates, braces etc. and including one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete.
(For Grills, Gates, Railing, Staircase, Doors, Gratings, Grab Bars, Ladders, Perlins, Rafters etc.)
8.8
-
74493.7
... More
Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually , striking joints on un exposed faces and watering etc.complete.
150
-
4790.45
... More
Providing tuck pointing with cement mortar 1:3 for stone/Brick masonry including scaffolding and curing etc. complete.
150
-
136.35
... More
Providing second class Burnt Brick masonry with conventional/ I.S.type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually ,striking joints on unexposed faces, raking out joints on exposed faces
and watering etc. Complete.
75
-
6299.5
... More
Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:4 in half brick thick wall including mild steel longitudinal reinforcement of 2 bars of 6 mm diameter / 2 hoop iron strips 25 mm X 1.6 mm placed at every third course, properly bent and bonded at ends scaffolding, racking out joints and watering etc. complete
150
-
824.5
... More
Providing internal cement plaster 20mm thick in two coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete
120
-
407.5
... More
Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete.
120
-
221.65
... More
Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.
150
-
664.5
... More
Providing and applying gypsum plaster ( with Gypsum material of Gypsum India with finishing with gypsum material in 6 to 8 millimeter including bonding agent over RCC surface like ceiling for bonding between Gypsum & Substrate average thickness to previously plastered surface / or on newly brick surface ( Excluding rough cast plaster ) in all position including preparing and Finishing the surface scaffolding etc.complete
350
-
300
... More
Providing and laying machine cut machine Polished Kota stone flooring 25mm to 30mm thick and required width in plain/ diamond pattern on bed of 1:6 C. M. including cement float, filling joints with neat cement slurry, curing, polishing,chamfering and cleaning etc. complete.
450
-
1041.6
... More
Providing and laying machine cut machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry,curing, polishing and cleaning etc. complete.
35
-
1170.1
... More
Providing leather finished polishing to Kota / Marble / Shahabad / Kadappa Stone slab by continuous grinding in 4 coats of different bits to receive rough and matty finish including buffing process before laying and fixing of stone as per drawing and design, including cleaning, washing and finishing etc. complete.
30
-
280.1
... More
Providing and fixing heavy duty inter locking concrete Grey paving blocks of 80 mm thickness of having a strength of 300 kg/Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete
300
-
924.9
... More
Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement morar including neat cement float, filling joints, curing and cleaning etc. complete. a) Flooring (Basic rate of tile-Rs 750/Sq.M)
550
-
1335.5
... More
Providing and laying vitrified matt finish tiles having size 590 mm to 605 mm x to 605 mm of 8 to 10 mm thickness and confirming IS. 15622-2006 (Group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete. b) Skirting (Basic rate of tile-Rs 750/Sq.M)
20
-
1430.2
... More
Providing and laying ceramic tiles having size 30 cm. x 45 cm. confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete. (Basic Cost of Ceramics Tile =Rs.516.00/Sq.M )
225
-
1066.2
... More
Providing and constructing granite Laboratory platform with fixing of Laboratory ceramic sink 600 mm x 450 mm size as per detailed drawing including vertical both side polished kadappah stone 25 to 30 mm thick supports with kadappah top 35 to 40 mm thick and polished granite 16 to 20 mm top with side strips of granite at front and both sides of platform raised with two vertical granite supports 15 cm height and top granite of 75 x 40 cm including cutting, opening for sink of required size in kadappah as well as granite etc. complete.
45
-
7715.7
... More
Providing and laying in position flooring & Skirting of telephone black / Amba White / Cat bary brown / Ruby red / Ocean Brown granite stone of approved shade and size 18 mm to 20 mm thick on bed 1:6 cement mortar including cement floats striking joints, pointing in C.M. 1:3 curing and cleaning etc. complete.(Basic rate of Granite -Rs. 1600/Sqm)
45
-
3208.9
... More
Providing and laying telephone black / Amba White / Cadburybrown / Ruby red / Ocean Brown granite stone of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints
with polymer base filler nosing the sharp edges wherever necessary, curing, etc. complete. (Basic rate of Granite -Rs. 1600/Sqm)
35
-
3027
... More
Supply & Fixing of Full Body Vitrified Steptiles Ready to install Treads 12 mm thick, required width and required finish in plain pattern including Cement float, filling joints, with neat cement slurry, Natural sand, curing and cleaning etc complete.
15
-
1616.41
... More
Providing and Fixing mat finish stainless steel (of 302 grade ) railing with top pipe of 50 mm dia. and vertical pipe of 38 mm dia at 0.60 m c/c or as required and horizontal pipes of 25 mm dia in three rows, all pipes of 2 mm thick including buffing,fabricating fixtures and fastening including pipe base of appropriate diameter and ball base of 75 mm dia above newel post of 75 mm diameter etc. complete (Prior approval of sample and brand by Ex.Engineer is necessary before use)(Make Jindal)
30
-
3816.3
... More
Providing and fixing of 10 mm thick poly carbonate sheets of approved shade / colour including ridges and flashings of 230mm wide as per drawing issued, all fixing arrangement such as screwing etc. and ensuring water tightness by applying silicon sealant in gaps ensuring 100% water tightness, Virgin PVC, gaskets of approved make manufactirer for roofing over open courtyard, ramp, etc. as per drawings issued (Giving guaranty for 10 years) (Rate shall include Alluminium patti male female at joints & edges) Note: As Per Detailed Architectural Design & Drawings
125
-
1414.5
... More
Providing and fixing colour coated Zincalume ( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing.The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anticapillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval.Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete.
(weight of profile 4.52 kg/sqm)
70
-
737.1
... More
Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.
(Paint Make - ASIAN) Spec No : As directed by Engineer in charge
3050
-
29.35
... More
Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.
(Paint Make - ASIAN) Spec No : As directed by Engineer in charge
2700
-
37.1
... More
Providing and applying one coat of flat oil paint of approved colour and shade to internal / external plastered surfaces including scaffolding if necessary, cleaning and preparing the surface (excluding primer coat) etc. complete.
(Paint Make - ASIAN) Spec No : As directed by Engineer in charge.
400
-
42
... More
Providing and applying melamine polish of required finish to the wood work by spray machine including knotting and preparing the even surface by scraping, applying French polish , scaffolding if required etc. complete.Spec No: As directed by Engineer-in charge.
45
-
631.5
... More
Providing and applying two coats of exterior Apex paint of approved manufacture and of approved colour to the plastered surfaces including cleaning ,preparing the plaster surface ,applying primer coat ,scaffolding if necessary, and watering the surface for two days etc complete
2740
-
203.5
... More
Providing and fixing frame with / without ventilator of size as specified with Ghana cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete. Spec No: As directed by Engineer-in charge.
1
-
136534.46
... More
Providing and fixing in position 5 mm thick clear float glass of any size in existing wooden or aluminium frame as per detailed drawing with all necessary fixtures and fastening such as etc. complete Note: As Per Detailed Architectural Design & Drawings (Glass- Modi, Saint-Gobain) Spec No: As directed by Engineer in charge.
30
-
514
... More
Providing and fixing solid core flush door 40 MM thick single leaf shutter of exterior grade as per detailed drawing approved laminate 2 mm thick on both faces Machine Hot Pressed or as directed, all necessary fittings, and fixtures with locks, handels and finishings etc. complete.Note-as per detailed architectural design and drawings. The materials to be used as mentioned in the list of approved make.Spec No : As directed by Engineer in charge.
40
-
4300
... More
Providing and fixing solid core flush door 50 MM thick Double leaf shutter of exterior grade as per detailed drawing approved veneer 3 mm thick on both faces or as directed, all necessary fittings, and fixtures with locks, handels and melamine finishings etc. complete.Note-as per detailed architectural design and drawings. The materials to be used as mentioned in the list of approved make.Spec No : As directed by Engineer in charge.
25
-
5400
... More
Providing and fixing solid core flush door 50 MM thick Double leaf shutter of exterior grade as per detailed drawing approved laminate 2 mm mm thick on both faces Machine Hot Pressed or as directed, all necessary fittings, and fixtures with locks, handels and melamine finishings etc. complete.Note-as per detailed architectural design and drawings. The materials to be used as mentioned in the list of approved make.Spec No : As directed by Engineer in charge.
20
-
4400
... More
Providing and fixing Fibro plast Door shutter for toilets with europa lock & all necessary fittings etc. complete. Spec. No: - As directed by Engineer in charge
10
-
3132
... More
Providing and fixing in position (as per 1868 / 1982) Aluminium sliding window of three tracks with rectangular pipe 95 x 38.10 x 0.90 mm at weight 0.637 kg/Rmt. with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 kg/Rmt.. Top and side track section 92 x 31.75 x 1.30 mm at weight 0.933 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. and handle and top section 40 x 18 x 1.25 mm at weight o.417 kg/Rmt. As per detailed drawings and as directed by Engineerincharge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screws and nuts etc, complete. With powder coating without box. Spec No : As directed by Engineer in charge.
12
-
4421.5
... More
Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension ?63.50 x 38.10 x 1.02 mm at weight 0.547 kg/Rmt. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 kg/Rmt. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 kg/Rmt. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 kg/Rmt. And handle section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. and top section 40 x 18 x 1.25 mm at weight 0.417 kg/Rmt. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With powder coating without box. Spec No : As directed by Engineer in charge.
12
-
4296.7
... More
Providing and fixing in position, Single shuttered aluminium extruded Anodised openable door of overall size 0.90 m x 2.40 m with aluminium door frame of anodised section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150 kg capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length tower bolts, 150mm diam. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.Complete. . (Make- Jindal) (Glass- Saint gobain, Modi) Spec No : As directed by Engineer in charge.
30
-
6864.7
... More
Providing and fixing in position, Double shuttered aluminium extruded Anodised coated openable door of specified size with aluminium door frame of Anodised section 101.60 x 44.75mm , 3.18 mm thick and shutter comprising of powder coated section having bottom and lock rail of size 150 mm x 44.5 mm x 3.00 mm thick top rails 47.62 x 44.45 mm x 3.00 mm thick , vertical style 47.62 x 44.45 mm, 3.00 mm thick and for shutter plain glass panes 5 mm thick for top panels and 12mm thick both side laminated phenol bonded particle board panels for bottom panels etc. , I.S.I. mark , heavy duty, Hydraulic floor spring of 150 kg capacity , having heavy duty concealed lock, necessary beading, glazing clips, PVC gaskets, 250mm length aluminium tower bolts, 150mm dia. pad handle, etc. as per detailed design and drawing or as directed by engineer in charge including all materials , labours, and equipment etc.complete.(Make- Jindal) (Glass- Saint gobain, Modi)
10
-
8269.3
... More
Providing and making Vision panel in doors shutter of as per size with 8mm clear glass including bedding patti etc.complete. Spec No : As directed by Engineer in charge.
25
-
246
... More
Providing and making Core Cut in in RCC works of as per size etc.complete. Spec No : As directed by Engineer in charge.
50mm Dia
10
-
675
... More
75mm Dia
10
-
1125
... More
100mm Dia
10
-
1350
... More
125mm Dia
10
-
1687.5
... More
150mm Dia
10
-
1687.5
... More
Providng and fixing in position anodised extruded aluminum partitions, partly glazed and partly laminated having frame made out of extruded tubular section of size 40 mm x 60 mm with 12 mm thick three layered flat pressed teak wood particle board bonded with BWP type exterior grade phenol formaldehyde synthetic resin conforming to IS 128231990, laminated on both sides, Novateakor equivalent and 5 mm thick selected quality plain/ float glass panels fixed with aluminum glass clips 12 mm x 12 mm and rubber cushioning beading to glass partitions . including door closer, glazing claps as per approved drawing & specifications etc. compete.(Make- Jindal) (Glass- Saint gobain, Modi)
275
-
2811.3
... More
Providing and fixing white glazed earthenware Labo tory sink 600mm x 200mm x 450mm including all connection of the G.I. supply and P.V.C. waste pipes up to the outside face of the wall, cold water chromium plated screw down bib tap, rolled steel or C.I. brackets, rubber plug with chain and stop tap complete. Spec No: As directed by Engineer in charge.
9
-
4391.1
... More
Providing and fixing 15cm x 10cm salt glazed stoneware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stoneware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.
9
-
1137.1
... More
Providing and fixing C.P. sink cock with raised J" shaped swinging casted spout ofapproved make including necessary sockets/ union nut etc. complete. Spec No: As directed by Engineer in charge.
9
-
1474.9
... More
Providing and fixing C.P. Angular stop clock with wall flange of approved make continental including necessary sockets/union nut etc. complete. Spec No: As directed by Engineer in charge
9
-
2351.9
... More
Providing and fixing 75 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Spec No:As directed by Engineer incharge.
32
-
467.9
... More
Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete. Spec No:As directed by Engineer in charge.
323
-
637.8
... More
Providing and fixing 15 cm rigid PVC Nahani trap including PVC grating ,bend,connectingpiece of UPVC pipe up to the outside face of wall ,making the good damaged surface and testing etc. complete ( Prior approval of sample and brand by Ex. Engr. is necessary before use)
9
-
437.4
... More
Providing and fixing on walls/ ceiling/ floors, 15 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 1.48 Kg/metre with necessary fittings. remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
33
-
346.2
... More
Providing and fixing on walls/ ceiling/ floors, 25 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 3.01 Kg/meter with necessary fittings . remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
33
-
490.9
... More
Providing and fixing on walls/ ceiling/ floors, 40 mm dia. heavy grade having embossed as ISI Mark galvanised iron pipes weight of 4.49 Kg/meter with necessary fittings and remaking good the demolished portion and applying primer of anti-corrosive oil paint 2 coats Including necessary scaffolding and removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.
33
-
596.9
... More
Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x 90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W. pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete with
R.C.C. Cover medium duty 140 kg with frame etc complete.
4
-
7511.8
... More
Providing and laying concrete pipes of I.S.NP. class of 300mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
50
-
1020.7
... More
Providing and laying concrete pipes of I.S.NP. class of 150mm diameter in proper line, level and slope including necessary collars, excavation, laying, fixing with collars in cement mortar 1:1 and refilling the trench complete.
10
-
656.65
... More
Providing and fixing H.D.P container Syntex one piece moulded water tank made out of low density polythyler and built corrugation including of delivery up to destination hoisting and fixing of accessories such as inlet, outlet overflow of all tanks capacity above 1000 to 20,000 litres
5000
-
11.5
... More
INTERIOR WORK
Providing and supplying Armstrong ‘Optra Acoustical Wall Paneling’ with square edges made of fibre glass / synthetic wool substrate 25mm thick and wrapped on the front side with an acoustically transparent and classified for Fire reaction Class B-s1, d1 as per EN13501, fabric with an option of colors Husk JT -06/ Copper JT-13 / Sangira JT -17 / Sesame VL-27B / Coffee VL-08N / Charcoal JT-14 / Titanium JT-07 / Flame JT-16 / Peanut JT-12 / Shell VL-22 as per the choice of the Architect 600x1200 mm providing a minimum sound absorption level of 0.85 NRC to be affixed to wall using Wall panel impalers supplied by M/s Armstrong Industries India Pvt. Ltd and construction adhesives as per the instructions laid down by the manufacturer. The material to be used as mentioned in the list of approved make. . (Mode of measurement - Sqm of plan area)
120
-
4500
... More
Providing and Fixing Mineral Fibre Acoustical Suspended Ceiling System with Dune (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 99%,NRC 0.5, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 16mm , with Recycled content of 35 %. The tile shall be laid on precoated G.I.channel height 32 with 15 mm wide T - section flanges colour white having rotary stitching and XL2 CLIP on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 7.57 Kgs/M2 and pull out stength of minimum 100 Kgs.. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system. The Tile and Grid system used together should carry a 10 year warranty.approved as per GRIHA and BS 476 etc. complete..( Make-Armstrong)
498
-
1495.9
... More
Providing and fixing in position Gypsum board false ceiling with 12.5 mm thick Gypsum boards, screwed/fixed to the under structure of suspended G.I. Grid constructed and suspended from the main ceiling consisting of ceiling sections of size 25 x 50 mm maximum center to center distance of 600 milimetre perimeter channel and intermediate Channels at maximum center to center distance 1200 milimetre galvanized grid should be fixed to reinforced cement concrete slab. The gypsum board should be fixed to galvanized iron grid with necessary screws. The boards should be taped and filled from underside to give smooth, seamless ceiling. The rate include necessary additional ceiling sections and intermediate channels. Additional intermediate channels should be fixed to strap hangers for additional support to prevent strapping at every 1200 milimetre item to be completed in all respect including necessary sleeves for ducts finishing of joints cut outs, painting including labour, material, lifts etc. all complete.. ( Mode of measurement - Sqm. of plan area)
186
-
1364.8
... More
Providing and Fixing Soft Fibre Acoustical Suspended Ceiling System with Optra (Bevelled Tegular) Edge Tiles of size 15mm Exposed Grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.9 - 1.0, Light Reflectance ?85%, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm , suitable for Green Building application, with Recycled content of 66% GW and 74% RW. The tile shall be laid on precoated G.I channel 32 with 15 mm wide T - section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm and 600 mm Cross Tees with a web height of 32 mm and a load carrying capacity of 7 Kgs/M2 with a minimum pull out strength of 100 kgs. The T Sections have a Galvanizing of 90 grams per M2 and need to be installed with Suspension system The Tile and Grid system used together should carry a 10 year warranty. products approved as per GRIHA and BS 476 etc. complete.) (Make- Armstrong)
94
-
2343.5
... More
Providing & Fixing in position, Aerocon Panels of 100 mm thickness in single partition with necessary framing & epoxy sealent between joint also including cost of required Cut-Outs, decorative mouldings / finishing-items / prime coat & Scaffolding, as per Architectural & Acoustical Design & Instructions & Complete in all aspects.including all materials labour,finishing etc complete.
33
-
2180
... More
Audio Visual Work Supplying, installation, testing and commissioning FOH speaker 300 watt (passive)A two-way front-load design featuring 90° X 60°, including Mounting Arrangement & necessary fittings as per technical specification etc complete as required.(Make- AHUJA/ VS300)
2
-
16600
... More
Supplying, installation, testing and commissioning Monitor speakers 300 watt (passive) A two-way front-load design featuring 90°X60°, including with necessary fittings as per technical specification etc complete as required.(Make- BOSE/RMU208)
1
-
1600
... More
Supplying, installation, testing and commissioning 8 Channel Mixer including with necessary fittings as per technical specification etc complete as required. (Make- Yamaha)
1
-
32000
... More
Supplying, installation, testing and commissioning Wireless Handheld Microphone system (set) including with necessary fittings as per technical specification etc complete as required. (Make- Ahuja)
2
-
6100
... More
Supplying, installation, testing and commissioning Podium Gooseneck microphone 15"/ 18" with base (set) including with necessary fittings as per technical specification etc complete as required. (Make- Ahuja with base)
2
-
4200
... More
Supplying, installation, testing and commissioning Microphone Patch panels 3 XLR x 3 nos including with necessary fittings as per technical specification etc complete as required. (Spec - As directed by engineer incharge).
2
-
4700
... More
Supplying, installation, testing and commissioning Microphone Cable 0.5 sq.mm 2 core shilded including PVc piping including with necessary fittings as per technical specification etc complete as required.(Spec-As directed by engineer incharge).
100
-
165
... More
Supplying, installation, testing and commissioning Speaker cable 2.5 sq mm 2 core including PVc piping including with necessary fittings as per technical specification etc complete as required. (Spec-As directed by engineer incharge).
100
-
145
... More
Processor Amplifiers
Supplying, installation, testing and commissioning Maximum Rated Power: 800 W (400 W x 2 channels) including with necessary fittings as per technical specification etc complete as required. (Make -AHUJA/T Z4000)
1
-
27800
... More
Supplying, installation, testing and commissioning 22U Rack including with necessary fittings as per technical specification etc complete as required. (Make-Custom) (Spec-As directed by engineer incharge).
1
-
22000
... More
Supplying, installation, testing and commissioning 1 No HDMI 20m, 1 No of RGBHV 20m, 1 No of USB 20m,1 no of HDBaseT 20 m and the 1.5m patch cords including with necessary fittings as per technical specification etc complete as required. (Make-RGBHV / HDMI cable) (Payement will be done on actual measurement on site.)
1
-
25000
... More
HVAC
VRF SYSTEMS
Supply, Lifting, shifting, assembly, installation, testing and commissioning of Out Door Units suitable for VRF / VRV System - The system shall comprise of Outdoor Units with Air-cooled condenser suitable for operation at ambient temp. of 40oC, high pressure Rotary / Scroll Compressors with hermetic motor, assembled and wired in a single package complete, starting controls, safety controls, operating controls and with full feature microcomputer based controller with real time clock and programming / diagnosis facility. One / All Compressors shall be fixed / invertor type based on manufacturer's technology.The unit is to be given a complete factory operating and control sequence test under load conditions with fluid hooked up, and is to be shipped with full operating charge of refrigerant and oil. Air-cooled Condensor, refrigeration-piping controls, first charge of refrigerant etc. The Refrigerant used shall be any CFC free gas either R407C/ R410A refrigerant OR any other variant of CFC free refrigerant gas.Vendor to include MS fabrication as necessary to install the VRF condensing in 2 tier system (one above other).The Outdoor units shall be complete as per technical specifications Outdoor units suitable for following capacities: I) 20 HP VRF ODU
2
-
660000
... More
AIR HANDLING UNITS Supply, installation, testing and commissioning of Sectionalised, Horizontal Double Skin Treated Fresh Air Handling Units constructed of extruded aluminum hollow sections framework, preplasticised GS Sheets of 24G (outside) / 22G (inside) with 50 mm thick injected PUF / 40 kg/One Cubic Metre + 2 % density and with thermal break, consisting of fan section having belt driven DIDW Aerofoil Backward Curved Blowers housed in a single enclosure with TEFC sq.cage motor IP55, vibration isolators. The AHU motors shall be high efficiency type IE-2. Fans shall be selected for higher total efficiency 75% and above. Motors shall be IE-3. AHUs shall be approved by VRF Manufacturer and suitable to be connected with Air-cooled VRF ODUs.Coil Section with 6 row-12 fpi DX cooling coil with Cu Tubes / Al.fin Coil headers shall be of copper as specified. Coil should be suitable for connecting with VRF ODU's. Drain tray shall be insulated sandwich type drain tray of SS (inside) / GI (outside) with liberal drain connections on either side shall be provided. The Double skin Sections shall include for Coil Section, with provision for elec. connection to the outside of AHU, Fire retardant double canvass connections, DP ports at each section, damper at AHU outlet, access doors with limit switch, maintenance lamp inside the fan section shall be included. The sections shall be provided in modular construction with enough service space and proper access doors as specified (wherever specified / required).The Prefilters shall be confirming to EU / Eurovent standards. The filters shall be with Al. Flange / Frame type with thermally bonded hydrophobic polyolefin fibers [synthetic] washable media. The filters shall be tested for filter efficiency as per EN779 – G4 / EU4 [efficiency of 90% down to 10 microns].AHU's should be suitable for outdoor duty aplication, Floor mounted suitable for outdoor application as Specified. Fan outlet velocity not to exceed 1800 fpm. Coil face velocity not to exceed 500 fpm. Installation of Double Skin Air Handling Units shall include for its installation in place, connections, testing and commissioning. Installation shall mean unloading, lifting-shifting, positioning, levelling assembly & installation in place. AHU Vendor shall be responsible for supply & assembly of floor mounted units at site. HVAC Vendor shall carry out the Unloading, lifting-shifting, connect, test and commission the AHUs in presence and with assistance from AHU vendor.Necessary foundation blocks / structural platform to be included under civil scope. Supporting arrangement for Ceiling Suspended AHU shall be in HVAC Contractors scope.
I) AHU-1 Horizontal Side/Top Discharge Floor mounted AHU / 16 TR (20 HP) / 6400 CFM / 50mm TSP / 6R-12FPI DX Cooling Coil suitable to connect with VRF Condensing units (20 HP x 1 nos) / 10 micron Pre-filters (EU4) / with return air plenum / Fan section with Backward Curve Aerofoil Fans. (For Seminar Hall).
1
-
198000
... More
II) INDOOR UNITS
Supply, Lifting, shifting, assembly, installation, testing and commissioning of Ductable, Cassette & Hi-Wall Type Units as follows in VRF / VRV System suitable for functioning with above outdoor units: Indoor Fan coil unit consisting of 3/4 row-cooling coil blower with motor, filters, drain pan & casing. The indoor unit shall be complete with all necessary controls including air and refrigerant temperature sensors and electronic expansion valves thus giving individual, variable refrigerant flow. The electronic expansion valve shall be controlled by the ‘fuzzy logic’ microprocessor control system via a control board within the indoor unit that includes a unit address recognition system. Indoor Units to trip incase of fire signal. Units for critical rooms on working & standby basis shall work on sequential basis as specified.All Indoor units shall include the standard condensate pump kit as supplied by the manufacturer. Units below ceiling level / wall mounted may require an additional condensate pump and shall be supplied by the installation contractor & same to be included here.The indoor unit shall be suitable for a power supply of 240V/ 1 phase/ 50Hz OR 415V / 3 phase / 50Hz. The indoor units shall be complete as per Technical Specifications and requirements as specified below. I )Ductable Indoor Units - 8.0 TR / 2800 CFM Ductable IDU with 20mm TSP.
2
-
132584
... More
VRV Accessories
Supply, Lifting, shifting, assembly, installation, testing and commissioning VRF Accessories as specified below and in Technical Specifications suitable for VRF operations. I) Multi Kits / Ref Joints II) Remote Controllers (to be included for cassette's and hi-walls in respective item rates)
3
-
5280
... More
Supply, Lifting, shifting, assembly, installation, testing and commissioning of Connectivity kits / Distribution Kit for AHUs for hook up /connecting to respective VRF outdoor units. Expansion Valve Kit comprsing of Electronic Expansion Valve (EEV), check valve and pipe temp, sensors. Control Box comprising of PCB, communication PCB, Power transformer and termincal block and suitable for hook up with VRF remote controller, CRC etc. I) Expansion kit suitable for AHU connectivity of 20 HP cooling coil capacity (For Seminar Hall Only)
1
-
69472
... More
PROPELLOR EXHAUST AIR FAN Supply, installation, testing and commissioning 200 mm dia propellor exhaust fan with gravity lourvers assembly. (necessary framework required for installation of fan is to be proviced by interior vendor) power cable with plug top needs to be considered as part of HVAC scope.
12
-
1650
... More
ELECTRICAL POWER AND CONTROL SYSTEMS POWER DISTRIBUTION PANEL Supply, Installation, Testing & Commissioning of Power Distribution Panel for VRF ODU comprising of fully compartmentalised cubicle type panel, as per specifications and complete with : (Incoming Power with earthing shall be provided to each of the distribution panels by Elec.contractor) i) Tinned Al. Busbars ii)7 tank pre-treatment, Panel with IP 65 construction & suitable for outdoor duty iii) Oven baked epoxy paint finish or powder coated iv) Incoming and outgoing feeders v) Indicating and measuring instruments vi) Interconnections, interlocking, earthing etc. vii) Starters & control panel ,Panel Cost should include also OLP, SPP, On/ Off push buttons with On / Off / Trip indications, 3nos. non polarised NO-NC contacts tripping on signal from fire alarm panel & BMS.PDB 1 (For Ground Floor ) Panel with IP 65 construction.
(i) Incomer suitable for VRF ODU - 40 HP
(ii) Outgoing a) Suitable for 20 HP # 2 nos (with ELCB)
b) Suitable for 20 HP # 1 nos (with ELCB) - Spare
1
-
49500
... More
Starter & Control Panel for AHU & FAN Supply, Installation, Testing and Commissioning of Starter and control panel suitable for 415 V, 3 phase, 50 Hz power distribution system. The panel shall be with IP 65 protection and should be fabricated for wall mounting compartmentalised design as per specifications. Starter & Control Panel comprising of incomming 4 pole MCB, Voltmeter, Ammeter, Phase indicating lamps etc. Outgoing feeders as DOL / StarDelta starter for AHU / FAN motor. Vendor to provide suitable capacity 2 nos spare feeders for AHU / FAN motor. Starter and control panel shall be complete with necessary control, including OLP, SPP, ON/OFF push buttons with ON & OFF indications, 3 nos. non polarised NO-NC contacts for tripping of Motorised Dampers, Fire Dampers and AHU / FAN motor on signal from Fire Alarm Panel. Also, vendor necessary interlocking for AHU / FAN operations including toggle switch for PSU & pumping down etc to be included as part of Starter and Control panel. Panel should be suitable to house the VFD. Vendor should consider power & control cabling from Starter panel upto respective AHU / FAN. The units shall be suitable for operation on 400/440 Volts, 3 ph., 50 Hz, 4 wire A.C. supply. CHW AHU (16 TR - 6400 CFM)
1
-
13200
... More
Outdoor type Isolators with IP 65 enclosure with ELCB for each VRF ODU
2
-
4950
... More
Power and Control cabling - Electrical contractor shall terminate power in individual switch socket for each IDU as per requirement. For VRF ODU incoming power shall be provided at the PDB, from there to each VRF ODU the cabling shall be carried out by HVAC contractor. Power and Control cabling with copper conductor min. 2 core x 1.5 sq.mm. Cu. Shielded control cabling shall be with PVC conduit as per specs. cable with end termination for Indoor units with Plug Top, Earthing connection, BMS connectivity etc. (from indoor to outdoor & interconnecting control cabling between ODU and CRC)
140
-
110
... More
Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/ pole or laid in provided trench/ pipe as per specification no.CB-LT/CU
20
-
336
... More
Cable Trays Supply and installation of GI perforated type cable trays of the following sizes fabricated out of perforated hot dip galvanised MS sheets of minimum 2 mm thick with 75 mm flange to be installed horizontally or vertically. The cable tray shall be complete including cost of bends, elbows, cross, tees, reducers etc as per drawings/ site condition and rate shall include cost of anchor fasteners, screws, nuts, bolts and misc. other fixing hardware painting of support structure etc as required. i) Structural steel such as ISMC, ISA, flats, rods etc to be used for support shall be included in this item. ii) The cable tray shall be factory built. Bidder shall include in his price, required numbers of Tees, Crosses, Bends, Elbows etc as required as per actual site conditions. Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner. Providing & erecting Hot dipped galvanized perforated type cable tray manufactured from 16 swg (1.6 mm thick) GI sheet of 150 mm width & 75 mm height complete with necessary coupler plates & hardware in approved manner
20
-
483
... More
REFRIGERANT AND DRAIN PIPING WORKS
Refrigerant piping Hard Copper refrigerant piping of required sizes for pair of gas (suction) & liquid, with 13 mm Closed Cell Insulation material class O / 60 kg/m3 density for wrapping the copper pipe lines. The piping system must be supported at 1.75 m distance. Rates to include special damping and supporting system including installation of factory made joints as required. Pressure Testing of VRF piping shall be as per VRF Manufacturer's requirements. Vendor to include G.I. Ready made Ladder type Cable Tray with cover for refrigerant piping, Power / Control cable for ODU and AHU. I) 28.6 mm dia ( Gas)
95
-
1639.9
... More
II) 22.2 mm dia ( Gas) 9.5 mm dia (Liquid)
20
-
1054.9
... More
Drain piping in hard PVC with all fittings, supports and clamps including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint. I) 40mm Dia (Museum & Seminar Hall )
25
-
165
... More
Drain piping in hard PVC with all fittings, supports and clamps including drilling hole in wall chipping wall etc to conceal and to route the drain pipe. The piping shall be suitably insulated with 19 mm thk Closed Cell foam Class O (Nitrile Rubber) stuck with approved adhesive compound. The insulation shall be covered with glass cloth and painted with rubberised paint. II) 32mm Dia ( Museum Only )
4
-
165
... More
AIR DISTRIBUTION
SHEET METAL DUCTING
Rectangular Ducting in Galvanised Steel Supply, fabrication, installation and testing of GSS metal ducts as per IS-277 (120 GSM both sides, LFQ & confirming to Class VIII) for GS Sheets and IS-655 for fabrication of following thicknesses including necessary G.I. hangers/ supports, volume control duct dampers, accessories, vanes, 3 mm neoprene rubber gasket etc. complete as per specifications in accordance with the approved shop drawings. No slip joints shall be allowed. Flanges shall be Rolamate or equivalent and ducts shall be with rigid supports as per technical specifications. Ducts to be sent in Factory Fabricated and Fully Boxed Form at the jobsite. The factory fabricated ducts shall be as per approved make list only. The quoted costs should include: i) Ducts with reinforcement/ strengthening ii) Air tight joints iii) Accessories such as splitter, damper, guide vane etc. iv) Hangers and supports. v) Painting with Black color paint for duct sides behind the grills. vi) The gasket used in case for all ducts shall be fire retardant vii) Ducts shall be fully sealed with Silicon Sealant for leak tight installation. Rectangular Ducting in Galvanised Steel I) 0.63 mm (24 SWG) GSS ducting (Museum & Seminar Hall )
250
-
858
... More
Rectangular Ducting in Galvanised Steel II) 0.80 mm (22 SWG) GSS ducting (Museum & Seminar Hall )
80
-
1105.97
... More
Rectangular Ducting in Galvanised Steel III) 1.00 mm (20 SWG) GSS ducting ( Only Seminar Hall Only )
30
-
1263.95
... More
Supply, fabrication, installation and testing of GSS metal ducts as per IS-277 (120 GSM both sides, LFQ & confirming to Class VIII) for GS Sheets and IS-655 for fabrication of following thicknesses including necessary G.I. hangers/ supports, volume control duct dampers, accessories, vanes, 3 mm neoprene rubber gasket etc. complete as per specifications in accordance with the approved shop drawings. No slip joints shall be allowed. Flanges shall be Rolamate or equivalent and ducts shall be with rigid supports as per technical specifications. Ducts to be fabricated to suit at site. The quoted costs should include: i) Ducts with reinforcement/ strengthening ii) Air tight joints iii) Accessories such as splitter, damper, guide vane etc. iv) Hangers and supports. v) Painting with Black color paint for duct sides behind the grills. vi) The gasket used in case for all ducts shall be fire retardant vii) Ducts shall be fully sealed with Silicon Sealant for leak tight installation. I) 0.63 mm (24 SWG) GSS ducting (Museum & Seminar Hall )
20
-
792
... More
II) 0.80 mm (22 SWG) GSS ducting (Museum & Seminar Hall )
20
-
935
... More
III) 1.00 mm (20 SWG) GSS ducting ( Only Seminar Hall Only )
10
-
990
... More
FLEXIBLE DUCTS
Supply, Installation, Testing and Commissioning of insulated flexible ducts. The insulated flexible duct shall have inner core made of double lamination of metalized polyster film permenantly bonded to a coated spring stel wire helix. Fibreglass insulation of minimum 14 kg.One Cubic Metre. density having a R-value 4.2oF-Ft2-hr/btu and 25 mm thk shall be wrapped over the inner core and covered with stronger outer jacket cum vapor barrier made of fibreglass reinforced metalized polyester film laminate. The insulated flexible duct should be fire retardant type. ( For Seminar Hall only )
I) Insulated Flexible ducts of 200 mm dia ( Only Seminar Hall Only )
16
-
295.45
... More
ACCESSORIES
Supply, fabrication, assembling, installation, and testing of air distribution accessories of assorted size as specified and shown on the drawing : VOLUME CONTROL DAMPER - MANUAL Supply, Installation and adjusting of GSS Volume Control Damper within ducts complete with suitable links, levers. Blades should be double skinned aerofoil construction and opposed blades should be at 50mm pitch centres. The blades should be mounted in nylon bushes operated by an interior wheel gear system. Manual quadrant control with position indicator to be provided to enable adjust volume of air as required.
2
-
6877
... More
FIRE AND SMOKE DAMPERS: Supply,Installation,Testing & Commissioning of Fire and Smoke Dampers (FSD) shall be installed in supply air duct when they pass through AHU room walls as shown in the drawings & as per specfications. The Dampers shall be motor operated with atleast 90 minutes fire rating as per UL 555S -Class II for fire and smoke management rated for 90 min.as tested by CBRI Roorkee, India. Each FSD shall be of multi leaf type,low leakage and shall be tested in the factory and will be certified by the manufacturer in form of the test certificate. The Actuator shall be direct coupled spring return type & motorised. Each FSD shall be supplied with matching sleeve (factory supply) and set of retaining angles for installation on wall / slab as indicated on drawings. The Actuator shall be in line with the Technical Specifications and shall be maintenance free direct coupled spring return type suitable to work on 24 V electric supply Dampers as per specifications mentioned above.
2
-
8360
... More
Motorised ON/OFF Actuators for above FSD The Actuator shall be in line with the Technical Specifications and shall be maintenance free direct coupled spring return type suitable to work on 24 V electric supply. The torque rating of the actuator shall exceed at least by 15% over torque required to open / close the damper. Shall have manual over ride facility.The selection of actuator size shall be the responsibility of the manufacturer. Power on indicating lamps with 230 V / 24 V transformer,damper close & open indication, reset push button, push button for manual running of actuator for periodic inspection, auxiliary contacts 24V & 230 V, contact points to receive signal from smoke detector / fire alarm panel etc. should be provided.
4
-
12559.83
... More
GRILLES & DIFFUSERS Supply, fabrication, assembling and installation of aluminium powder coated diffusers as indicated in the drawings and as per specifications. (Color to match as per architects requirements) Supply Air Diffuser The 4-way square supply air terminal should be in Al powder coated construction with easily removable central core & 4-way uniform air distribution. Volume control damper to be of opposed blade, nylon geared with aerofoil blades & black matt powder coated. (Out to Out Size shall be 24"x24" with full louvers with required duct connection size (as per approved layouts) & as per approved sample.(Color to match architect's requirements.)
32
-
2620
... More
Supply /Return / Exhaust Air L-bar Grill In extruded aluminium construction, powder coated. One way/2 way fixed deflection with end flanges -15deg.as required and as shown in the drawings.
10
-
5682.53
... More
Box Type Dampers: Aluminium Box type collar damper with nylon - geared control & with aerofoil blades for above grills in black matt powder coated finish. Box type dampers for S. A. collar
4
-
5414.2
... More
Flexible Canvas Connection: Supply, fabrication & installation of double canvass (fire retardant) flexible connection for Inline Fans & Ductable Indoor Units as per drawings & specifications.
2
-
660
... More
Al. Louvers for Fresh Air / Exhaust Supply, installation, testing & commissioning of Fresh Air /Exhaust Air Louvers - constructed in Extruded Aluminium Anodised finish. Blades inclined at 45deg. on 40mm pitch complete with: a) Sheet steel enclosure cowl b) Opposed Blade Volume Control Damper c) Bird wire guard in galvanised steel with front flanged frame
2
-
7327.8
... More
INSULATION Thermal Insulation of Ducts - for External Ducts - Supply, fabrication & Installation of thermal insulation on GI ducts complete with Closed Cell foam with minimum density of 60 Kg/m3 with minimum R Value 4.1/inch & thermal conductivity -0.035 w/mok confirming to Class 'O' & the inner side stuck to the outer facia of the GI ducts with recommended / Proprietory Synthetic adhesive bonding (SR998 or equivalent) & installed as per manufacturers recommendation and finished with vapour barrier with Lagging and covered with glass cloth with mechanical protection for ducting without puncturing the vapour barrier complete as per specifications. Lag coating AF5590 shall be used as vapour barrier and as protective covering on glass cloth and shall be UV protected.
I) 16 mm thick Insulation ( Only Seminar Hall Only )
30
-
928.05
... More
Thermal Insulation with Factory Backed Alu Foil for Internal Ducts - Supply, fabrication & Installation of thermal insulation on GI ducts complete with Closed Cell foam with minimum density of 60 Kg/m3 with minimum R Value 4.1/inch & thermal conductivity -0.035 w/mok confirming to Class 'O' & the inner side stuck to the outer facia of the GI ducts with recommended / Proprietory Synthetic adhesive bonding (SR998 or equivalent) & installed as per manufacturers recommen-dation. The insulation joints shall be sealed with 3" wide Tape.
I) 13 mm thick Insulation + Factory backed Al.foil (Museum & Seminar Hall Only )
230
-
665.08
... More
Acoustic Insulation of Walls / Partition of AHU / DSU Trap Door - Supply, fabrication and installation of Acoustic insulation on walls of AHU rooms and partition / trap door of ceiling suspended AHUs as specified and shown on the drawing complete with : 50 mm thick acoustic insulation [2 layers x 25mm thk] a) Aluminium frame work 1.2 m x 0.6m b) Synthetic adhesive bonding c) 48 kg/One Cubic Metre Resin bonded Fibre Glass (Glass Wool) with RP tissue / Glass clothd) 24 G Perforated Aluminium cladding ( Only Museum )
10
-
693
... More
Acoustic Lining of Ducts Supply, fabrication and installation of acoustic lining of supply and return air ducts as specified and shown on the drawing complete with a) 48 kg/cum Rigid Board Fibreglass b) CPRX Cold compound bonding. c) RP tissue paper d) 26 G Perforated aluminium cladding 12.5 mm rigid board acoustic lining.
60
-
374
... More
Fire Fighting Work Supplying, installing, testing and commissioning with perfect aligning, proper levelling of booster pump of 900 LPM at 40 m Head, 12.5 HP (10 KW), 3 phase, 415 volt, 50Hz or of suitable HP with suitable stages as per specification no. FF-MFP/BP
1
-
53809
... More
Supplying and erecting fully Automatic star/delta starter suitable for 12.5 H.P. to 15 H.P. for 3 phase squirrel cage motor totally enclosed with overload and no volt relay complete erected on provided angle iron rame. (similar to L & T make MK-1 FASD model.)
2
-
6361
... More
Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. copper conductor continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/ pole or laid in provided trench/ pipe as per specification no. CB-LT/CU
40
-
512
... More
G.I.pipe above ground of ‘C’ class ERW
Supplying and installing cast iron double flange sluice valve 100 mm dia. as per specification No.FF-VL/SV
1
-
7569
... More
Supplying and installing cast iron double flange sluice valve 75/80 mm dia.as per specification No. FF-VL/SV
1
-
5137
... More
Cast iron end line Strainer (for +ve suction, suction side of the pumps)
Supplying and installing 100 mm dia end line strainer for +ve suction as per specification No.FF-VL/ELS
1
-
5679
... More
Cast Iron double flange Non Return Valve Supplying and installing double flange NRV of size 100 mm dia as per specification No. FF-VL/NRV
1
-
7365
... More
Supplying & Installing cast iron double flange butterfly valve of size 100 mm dia. as per specification No. FF-VL/BFV
1
-
3559
... More
Supplying & erecting cast iron double flange butterfly valve of size 50 mm dia. complete as per specification no. FF-VL/BFV
1
-
2143
... More
Hydrant system
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 150 mm dia with necessary fittings as per specification no.FF-PP
59
-
2165
... More
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 100 mm diawith necessary fittings as per specification no. FF-PP
23
-
1473
... More
Supplying and installing G.I.pipe above ground of ‘C’ class ERW of size 75/80 mm diawith necessary fittings as per specification No. FF-PP
5
-
1075
... More
Bitumen Paint & 4mm thick Wrapping for underground Piping
Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 150 mm Ring Main of Fire Fighting System.
12
-
455
... More
Providing coating of Bitumen Paint & 4mm thick Wrapping as per IS 10221 for underground 100 mm Ring Main of Fire Fighting System.
1
-
335
... More
Supplying, installation, testing and commissioning of landing Hydrants comprising of the following in the fire duct; Supplying and installing gun metal Stainless Steel single outlet hydrant valve fitted with necessary accessories complete as per specification No. FF-VL/HV
4
-
5010
... More
Supplying fire fighting C.P. (controlled percolation) Hose pipe, 63mm dia, 15min length, fitted with necessary accessories complete as per specification no. FF-FFA/CPH
8
-
3731
... More
Supplying Stainless Steel branch Pipe 63 mm Ø fitted with 20 mm dia detachable hexagonal nozzle as per specifications No. FF-FFA/NZ
4
-
1728
... More
Supplying and installing wall mounting swinging Hose reel drum fitted with 19 mm dia. 30mhigh pressure polypropylene (Polyhose) long fitted with necessary accessories complete as per specification No. FF-FFA/HV
4
-
6234
... More
Supplying & installing gun metal gate valve of size 25mm dia as per specification No. FF-VL/GV
4
-
1115
... More
Supplying and erecting 20/25mm dia gun metal air release cock, Each with necessary G.I. coupling to be fitted on top of air vessel or on wet riser complete as per specification no. FF-FFA/ARV
1
-
716
... More
Supplying and installing pressure gauge of 100 mm Ø., 0-300 PSI or 0-14 kg per cm square fitted with 12/15 mm Ø. pad cock valve, and G.I. pipe, elbow etc. as per requirement in an approved manner as per specification No. FF-FFA/PG
4
-
657
... More
Supplying and erecting M.S./CRCA cabinet for housing Floor Hydrant valve, hose pipe, hose reel and branch pipe (size 1000 mm x 736mm x 736 mm.) made from 16 SWG sheet and angle iron 25 mm. x 25 mm. x 4 mm. having front doors with viewing glass (8"x6") and locking arrangement with necessary fixing material such as rubber bidding etc. duly painted in post box red colour.
4
-
13732
... More
Supplying and installing fire brigade Header(Siamese Connection)of 150 mm Ø for supplying water to wet riser system as per specification No. FF-FFA/SMC
1
-
10021
... More
Fire Extinguishers
Supplying and erecting D.C.P. type Fire Extinguisher 9 kg capacity cartridge type with Gun Metal cap 150 gram CO2 gas cartridge, powder and brackets conforming to IS 2171-1985 and complete rected with necessary clamps made from 50x6 mm M.S. flat with nuts & bolts grouted in wall complete.
2
-
3638
... More
Supplying and erecting ABC powder type fire extinguisher as per IS : 13849 /15683 of6 kg capacity with necessary clamp for erection on wall.
14
-
2107
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements