Pune University Tender

Supply, installation, testing, commissioning of power Distribution panel with following specification. Panel made form 14 swg CRCA sheet, Free standing, floor mounted, front hinged, for indoor use, cubicle type, rear removable, underlined and removable bottom gland plates for incoming and outgoing connections, dust and vermin proof with TPN Alluminium bus bar, complete with internal wiring, ferrules name plates, powder coated, with complete interlock, gaskets, and following accessories. supply & fixing 6" x 3" M.S. base channels on cable trench / Floor , including painting of channels by 2 coats or red oxide paint and 2 coats of enamel paint (for switchboards to be mounted on trench and including supply, fixing and painting as above of floorstand 100 x 50 M.S, channel all sides, Panels as under As Per single line diagram & Boq. (Main Incoming L.T. PANEL) (MDB) MAKE :- L&T, SCHINDER, ABB INCOMEING FROM SUBSTAION TRANSFORMER 1 Sets of 400 A 4P 36 KA MCCB each with SC / OC / EF / UV M.P. based releases with following mountings on each feeder. 1 Set. LED R-Y-B Indicating Lamps. With 1 set. Control MCB's 4 Nos.400/ 5A 15 VA class 5 P 20 C.T.'s 1 No Multi function Load Manager & KWH Meter with RJ 485 Port for Down load the Reading Data in Computer with software, With 3 Nos. Control MCB's 1 No Line voltage monitor with 3 Nos. Control MCB's

Busbars 400 Amps TP(N) 36 KA Al. Heat Shrink color PVC sleeved. With 400 Amp 36 KA rated 433 Volt Surge Suppressor on Bus bar WITH 63 AMP 4P MCCB 16 KA THERMAL RELEASE OUT GOING 1 Sets of 200 A TP 25 KA MCCB each with SC / OC / EF Microprocessor based releases with following mountings on each Feeder.. 1 Sets of 63 A TP 16 KA MCCB each with SC / OC / EF Thermal based releases with following mountings on each Feeder.. 1 set. LED ON / OFF/ TRIP Indicating Lamps with 1 Nos. Control MCB's. 8 Sets of 40 A TP 16 KA MCCB each with SC / OC / EF Thermal based releases with following mountings on each Feeder.. 1 set. LED ON / OFF/ TRIP Indicating Lamps with 1 Nos. Control MCB's. 5 Sets of 63 A FP 10 KA MCB each. 7 Sets of 40 A FP 10 KA MCB each. 1 Sets of 40 A DP 10 KA MCB each.

Supply, installation, testing, commissioning of power Distribution panel with following specification. Panel made form 14 swg CRCA sheet, Free standing, floor mounted, front hinged, for indoor use, cubicle type, rear removable, underlined and removable bottom gland plates for incoming and outgoing connections, dust and vermin proof with TPN Alluminium bus bar, complete with internal wiring, ferrules name plates, powder coated, with complete interlock, gaskets, and following accessories.supply & fixing 6" x 3" M.S. base channels on cable trench / Floor , including painting of channels by 2 coats or red oxide paint and 2 coats of enamel paint (for switchboards to be mounted on trench and including supply, fixing and painting as above of floorstand 100 x 50 M.S, channel all sides, Panels as under As Per single line diagram & BOQ. HVAC VRV OUDTDOOR DOUBLE DOOR WITH CANOPY IP54/55 PANEL -1 MAKE :- L&T, SCHINDER, ABB INCOMEING 1 Sets of 160 A 4P MCCB 25 KA ACB each with SC / OC / EF / Thermal based releases with following mountings on each feeder. 1 Set. LED R-Y-B Indicating Lamps. With 1 set. Control MCB's 4 Nos.160 / 5A 15 VA class 5 P 20 C.T.'s 1 No Multi function Load Manager & KWH Meter with RJ 485 Port for Down load the Reading Data in Computer with software, With 1 set. Control MCB's