Public Works Department Tender

Excavation for roadway in earth, soil of all sorts, sand, gravel orsoft murum including dressing section to therequiredgrade,camber and side slopes and conveying the excavated materials with all lifts and leads and spreading for embankmentor stacking as directed. By Mechanical Means. (Materials including all lifts and leads)

Excavation for roadway in hard murum including dressingsection to the required grade, camber and side slopes andconveying the excavated materials with all lifts and leads and spreading for embankment or stacking as directed. ByMechanical Means. (Materials including all lifts and leads)

Excavation for roadway in soft rock, including dressing sectionto the required grade, camber and side slopes and conveyingthe excavated materials with all lifts and leads and spreading or stacking as directed. By mechanical means (Materials including all lifts and leads)

Excavation for roadway in hard rock by controlled blastingincluding dressingsection to the required grade, camberandside slopes and conveying the excavated materials with all lifts and leads and spreading for embankment or stocking as directed. (Materials including all lifts and leads)

Excavation for catch / side water gutter in all sorts of soils tothe specified section including stacking the excavated stuff in aregular bund and disposing of unsuitable or excess stuff asdirected all sorts of soils. By Mechanical Means (Materials including all lifts and leads)

Excavation for catch / side water gutter in Hard murum strata tothe specified section including stacking the excavated stuff in aregular bund and disposing of unsuitable or excess stuff asdirected.By Mechanical Means (Materials including all lifts and leads)

Excavation for catch / side water gutter in Soft rock strata tothe specified section including stacking the excavated stuff in aregular bund and disposing of unsuitable or excess stuff asdirected. by Mechanical Means (Materials including all lifts and leads)

Watering & compacting of embankment formed of materials obtained from the road cutting with all lifts and leads, not lessthan 97% of standard Proctor density after laying them in layersof 20 cm. to 30 cm. with Power roller. (Materials including all lifts and leads)

Conveying materials obtained from road cutting including all lifts, laying in layers of 20cm to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard Proctor density including all lifts and leads inclusive from the site of excavation to the site of deposition as directed. (Materials including all lifts and leads)

Providing earth work in embankment with approved materialsobtained fromDepartmental land or other sources including all lifts and leads, laying in layers of 20cm. to 30cm.thicknessbreaking clods, dressing to the requiredlines, curves,grades & section, watering and compaction with vibratory rollerwith V­Sat attachment to achieve not lessthan 97 % ofSandard proctor density etc. complete (Materials including all lifts and leads)

Construction of granular sub­base by providing close gradedMaterial, mixing in a mechanical mixplant at OMC, carriage ofmixed Material to work site, spreading inuniform layers withmotor grader onprepared surface and compacting withvibratory power roller to achieve thedesired density, completeas per clause 401 ­­ Plant Mix Method and Grading ­ I Material (Materials including all lifts and leads)

Wet Mix Macadam ­­ Providing, laying, spreading andcompacting graded stoneaggregate to wet mix macadamspecification including premixing the Material with water at OMCin mechanical mixplant carriage of mixed Material bytipper tosite, laying in uniform layerswith paver in sub­ base / basecourse on well prepared surface and compactingwith vibratoryroller to achieve the desired density. (Materials including all lifts and leads)

Prime coat ­ Providing andapplyingprimer coat with bitumenemulsion on prepared surface of granular Baseincludingcleaning of road surface andspraying, primer at the rate of0.60 kg/sqm using mechanical means. (Materials including all lifts and leads)

Providing and applying tack coat on the prepared surfaceheating by flames inBoiler and spraying bitumen with sprayeron Concrete surface treated with primer @ 3.25 kg/10 sqm withVG­30 bulk Bitumen (Materials including all lifts and leads)

DENSE BITUMINOUS MACADAM:Proving and laying densebituminousmacadam using crushed aggregates ofgrading 2,premixed with bituminousbinder VG­30 Bitumen @ 4.50 percent byweight of total mix and filler, transported to site withVTS , laid over a previously prepared surface, finished to theequired grade, level, alignment, and rolling toachieve thedesired density for 50/75 mm compacted thickness .USING 80TPHBatch mix type hot mix plant withSCADA, Sensor Paver,ntelligentCompactor with compaction analyzer and V­Satattachment with Stone Dust filler. (Materials including all lifts and leads)

BITUMINOUS CONCRETE:­ Providing and laying bituminousconcrete usingcrushed aggregates of grading 2,premixed withbituminous binder @ 5.40per cent by weight of total mix andfiller, transported to site with VTS , laid over a previouslyprepared surface,finished to the required grade, level,alignment, and rolling to achieve thedesired compaction for30/40 mmcompacted thickness with VG­30Bitumen,Excludingprime / tack coat. For Bitumen VG­30 bulk ­­ USING 80 TPHBatch mix type hot mix plant withSCADA, Sensor Paver,IntelligentCompactor with compaction analyzer and V­Satattachment with Stone Dust filler (Materials including all lifts and leads)

Providing and laying in­situ M40 Grade unreinforced plaincement concretepavement over a prepared sub base with 43grade cement , coarse and fineaggregate conforming to IS383, usingfine & coarse aggregates combinedgradation as perTable 600­3 of MORTH Specification 2013, mixed in a batchingand mixing plant/ non tilting mixer and Weigh batcher as perapproved mix design, admixtures, transporting to site,spreading, laying with approved make paver,compacted andfinished in a continuous operation, finishing to lines and gradesas directed by Engineer­in­charge and curing bycuringcompound /by providing cementvata in cement Mortar 1:8@0.6m X 0.6m centre to centre, admeasuring 80 mm at bottomand 40 mm at top with depth of 75mm and maintaining thesame throughout curing period by any other method approvedbyEngineer­in­charge ( initial lead of 5.00 Km for raw materialsup to plant site) Spec. No. M.O.R.T.& H 2013. Cl­602 P.N.263 (Road Pavement) (Materials including all lifts and leads)

Construction of dry lean cementconcrete Sub­ base over aprepared sub­gradewith coarse and fine aggregate conformingto IS: 383, the size of coarse aggregate not exceeding 25 mm,cement content not tobe less than 150 kg/ cum, optimummoisture content to be determined during triallengthconstruction, concrete strength notto be less than 10 Mpa at 7days,mixed in a batching plant/ Weigh batchmixer,transported to site with all leadsand lifts, laid with a paver withelectronic sensor /by suitable means asapproved by Engineer­in­charge ,compacting with vibratory roller, finishing, curingand including preparation ofsub­grade surface if required etc.complete. (Road Pavement) (Materials including all lifts and leads)

Providing and fixing in position mild steel 32 mm dia dowelbars precoated with anticorrosive epoxy paint of required Dia.60 cms. Long and at 30.00 cm. C/C & wherever directedincluding handling, straightening, necessary cutting supportedby HYSD chairs with proper alignment by using properlydesigned assembly of Bulkheads lubricating half length withbituminous paint as directed etc. complete. (Materials including all lifts and leads)

Providing and fixing in position HYSD tie bars precoated withanticorrosive epoxy paint of 12 mm dia. 70 cms.long and at30.00 cm. C/C & wherever directed including handling,straightening wrapping with paper of approved quality for halflength, necessary cutting, handling, straightening , supportedby assembly of HYSD chairs with proper alignment etc.complete. (Materials including all lifts and leads)

Cutting transverse contraction joints 3 to 4 mm wide and depth60mm. .in concrete slab using concrete cutting machine withdiamond studded saw within 48 hours of casting of bay / slabetc. complete including subsequent widening of the groove 8to 10 mm. wide at top having depth of 15 mm. as directed byEngineer incharge. (Materials including all lifts and leads)

Providing to contraction joints polysuphide sealent (Pouringgrade) confirming to BS : 5212 ­ 1989 into sawed groovewidened at top for sealent reservoir of specified size and shapeas per detailed drawing including fixing Polyethylene foambacker rod of required diameter (appraox. 25% larger than theinitial 3 mm.to 4 mm. joint) overlaid with bond breaking tapeas per detailed drawing. Item includes cleaning the joints withwater jet / air compressor & allowing joint to becomethoroughly dry before sealent is applied and applying primer.(A) Contraction & longitudinal joints (15 mm. deep x 8mm.wide) (Materials including all lifts and leads)

Providing and laying 125 micron Low Density Polyethylene (LDPE) sheet confirming to IS 3395 : 1997 below concretepavement including all materials and labour complete. (Materials including all lifts and leads)

Providing and fixing factory madeHydraulically pressedMechanically vibrated and compacted precast inter lockingcement concrete paving blocks 80MM thick in M­40 grade ofapproved size and shape for City streets, small /medium marketroads,low volume roads, utility cuts on arterial roads etc. asspecified and as per IS 15658:2006 including cost of allmaterials, manufacturing, curing,transportation of blocks towork site including loading, unloading and stacking as directed,laying paving blocks in position over prepared bed of naturalsand / crushed sand of 50 mm thickness ncluding necessaryexcavation in all stratas, spreading blindge of fine sand over theprepared bed,compacting blocks by plate vibrator etc.complete. (Materials including all lifts and leads)

Providing & fixing R.C.C. 1:2:4 ordinary km. stones includingpainting numbering etc. complete for N.H./ S.H./ M.D.R. etc. asper IRC design for highway km stone and fixing in standard sizeC.C. 1:4:8 block etc. complete. (Materials including all lifts and leads)

Supplying & Fixing of Molded Shank Raised Pavement Markers /Cat's Eye made of polycarbonate and ABSmoulded body andreflective panels with microprismatic lens capable of providingtotal internal reflection of the light entering the lens face andshall support a load of 16000 kg tested in accordance to ASTMD 4280 Type H and complying toSpecifications of Category Aof MORTH Circular No RW/NH/33023/10­97 ? DO III Dt 11.06.1997. The height, widthand length shall not exceed 50 mm,100 mm and 102 +/­ 2 mm and with minimum reflective areaof 13 Sqcm on each side and the slope to the base shall be 35+/­ 5 degree. The strength of detachment of the integratedcylindrical shanks, (of diameter not less than 19 +/­ 2 mm andheight not less than 30+/­ 2 mm) from the body is to be aminimum value of 500 Kgf. Fixing will be by drilling holes onthe road for the shanks to go inside, without nails and usingepoxy resin based adhesive as per manufacturer?srecommendation and complete as directed by the engineer. (Materials including all lifts and leads)

Road Marking with Hot AppliedThermoplastic Compound withReflectorizing Glass Beads on Bituminous Surface­ Providing andlaying of hot applied thermoplastic compound 2.5 mm thickincluding reflectorizing glass beads @250 gms per sqm area,thickness of 2.5 mm is exclusive of surface applied glass beadsas per IRC:35 .The finished surface to be level, uniform and freefrom streaks and holes.complete. (Materials including all lifts and leads)

Providing and fixingMandatory/Regulatory sign boards incircular shape of 600 mm dia made out of 1.5mm aluminumsheet bonded with white retro reflectivesheeting of Class B (Type IV Highintensity micro­prismatic gradesheeting­HIP) having pressure sensitive/heat activated adhesive retoreflective specified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67­2012 Table No8.3 supported on one no. of M. S. angle iron post of size 65mm X 65 mm X 6 mm, 3.45 m long,  duly painted with withflatoil paint having alternate black and white bands of 25 cm widthincluding G.I. fixtures etc; fixing the boards in M25 gradeconcrete block of size 60cm X 60cm X 75cm includingtransportation etc; complete. Class B ( Type IV High intensitymicro­prismatic grade sheeting­HIP) shall have 7 years writtenwarranty from the manufacturer & authoriseddistributor/convertor issued for field performance including thescreen printed areas and cut­out sheeting and cut­out durabletransparent overlay film and this warranty certificate in originalshould be submitted to the Engineer in charge by thecontractor/supplier. (Materials including all lifts and leads)

Providing and fixing Cautionary/Warning sign boards inEquilateral Triangle size of 900 mm out of 2mm aluminum sheetbonded with white retro reflective sheeting of Class B ( Type IVHigh intensity micro­prismatic grade sheeting­HIP) havingpressure sensitive/heat activated adhesive retoreflective specifiedback ground, border and back side retoreflctive symbols, letters,numerals, arrow as per IRC:67­2012 Table No 8.3 supported onone no. of M. S. angle iron post ofsize 65 mm X 65 mm X 6mm, 3.45 m long, duly painted with with flat oil paint havingalternate black and white bands of 25 cm width including G.I.fixtures etc; fixing the boards in M25 gradeconcrete block ofsize 60cm X 60cm X 75cm including transportation etc;complete. Class B ( Type IV High intensity micro­prismatic gradesheeting­HIP) shall have 7 years written warranty from themanufacturer & authoriseddistributor/convertor issued for fieldperformance including the screen printed areas and cut­outsheeting and cut­out durable transparent overlay film and thiswarranty certificate in original should be submitted to theEngineer in charge by the contractor/supplier. (Materials including all lifts and leads)

Providing and fixing of retro­ reflectorised informatory signboard rectangular/Square in shape having area less than 0.9square meter made out of 2mm aluminum sheet bonded withwhite retro reflective sheeting of Class B ( Type IV High intensitymicro­prismatic grade sheeting­HIP) having pressuresensitive/heat activated adhesiveretoreflective specified background, border and back side retoreflctivesymbols, letters,numerals, arrow as per IRC:67­2012 Table No 8.3, supportedwith back support frame 25mm x 25mm x 3mm, duly paintedon back side withtwo coats of grey stove enamel paint &supported on one no. mild steel angle iron post 75 mm x 75mm x 6 mm, 3.5 mt long firmly fixed to the ground by meansof properly designed foundation with M25 grade cementconcrete 45 cm x 45 cm x 60 cm, 60 cm below ground level asper approved drawing The angle iron post shall be duly paintedwith one coat of epoxy primer and two coats of epoxy finishpaints having alternate black and white bands of 25 cm widthincluding GI fixures and transportation etc.complete.The nutbolts of board with angle iron post/supporting structure afterfixing at site has to be electrically elded. Class B ( Type IVHigh intensity micro­prismatic grade sheeting­HIP) sheetingshall have 7 years written arranty from the manufacturer &authorised distributor/convertor issued for field performanceincluding the screen printed areas and cut­out sheeting and cut­out durable transparent overlay film and this warranty certificatein original should be submitted to the Engineer in charge by thecontractor/supplier. (Materials including all lifts and leads)

Providing and fixing board displaying information, such as'Name of work, Tender cost, Name of Contractor, Workcompletion and liability period etc', having rectangular shape of1.20m x 0.90m size made out 18 gauge (1.25mm) thick mildsteel sheet painted with one coat ofZinc chromate stovingprimer and two coatsof enamel paint on front side and greystove enamel on back side and border / messages / symbolsetc. with approved colour shade paint complete, onM.S.angleof size 35 x 35 x 3 mmframe with properly cross braced M.S.angles of size 35mmx35mmx3mm duly painted including TwoM.S. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 mlong painted with alternate black and white bands of 25 cmwidth including all fixtures etc.and fixing the boards in 1:4:8nconcrete block of size 60 cm x 60 cm x 75 cm including,excavation, refilling, transportation, and labour etccomplete.Spec. No. As directed by Engineer in Charge (Materials including all lifts and leads)

Providing and fixing in position Guard Railing as per Drg. No.15 Type C dt. 20­4­79, with 3 rows of 50mm dia. G.I. pipe30cm a part and fixed in M.S. channels of section 125 x 65 x 6mm spaced 2.5 C/c 1:2:4 c.c. bedding of size 45 x 30cm. asper detailed drawing, with 3 coats of approved yellow and blackpaint including necessary excavation in any strata. (Materials including all lifts and leads)

Metal Beam Crash Barrier ­­ Type ­ A, W : Metal Beam CrashBarrie(Providing and erecting a "W "metal beam crashbarriercomprising of 3 mm thickcorrugated sheet metal beam rail, 70cm above road/ground level, fixed on ISMC series channelvertical post, 150 x 75 x 5 mm spaced 2 m centre to centre,1.8 m high, 1.1 m below ground/road level, all steel parts andfitments to begalvanised by hot dip process, all fittings toconform to IS:1367 and IS:1364, metal beam rail to be fixedon the vertical post with a spacer of channel section 150 x 75 x5 mm, 330 mm long complete as per clause 810) (Materials including all lifts and leads)

Providing  and  laying  in  situ  cement  concrete  of  M10  proportion with  trap/ granite/  quartzite/  gneiss  metal  in foundation including  necessary  form  work,  compacting  and  curing  etc. complete.(with  reversible  drum  rtype  mixer  with SCADA  with natural sand) (Road Work/Retaining Wall/Drain) (Materials including all lifts and leads)

Providing  and  laying  cement  concrete pipe  of  IS  458:2003  NP­ 3  class  of 800mm  diameter  in  proper  line,  level  and  slope including  providing  and  fixing  collars  in  cement  mortar  1:2  and curing etc. complete. (Materials including all lifts and leads)

Providing  and  laying  cement  concrete  pipe  of  IS  458:2003  NP­4  class  of  1000mm  diameter  in  proper  line,  level  and  slopeincluding  providing  and  fixing  collars  in  cement  mortar  1:2  andcuring etc. complete. (Materials including all lifts and leads)

Providing  cast  in  situ  block  of  M10  cement  concrete  with circular  or  other  shaped  opening  for  waterway  including necessary  formwork,  compaction,  finishing  and  curing  etc. complete.  (with  reversible  drum  type  mixer  with  SCADA  withnatural sand, cement 4.05 bags/cumt) (Craddle For CD Work) (Materials including all lifts and leads)

Providing cast in situ M15 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer with SCADA with natural sand, cement 4.05 bags/cumt) (PCC For Face Wall of CD Work) (Materials including all lifts and leads)

Providing  and  casting  in  situ  PCC  M15  grade  of  trap  metal  forcoping  to  head  walls  /  parapet  including  centering,  form  work,compaction  and  curing  etc.  complete.  (with  reversible  drumtype mixer with SCADA with natural sand) (Retaining Wall) (Materials including all lifts and leads)

Excavation for foundation by mechanical means in earth, soils, of all types, sand, gravel, soft murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete. (Materials including all lifts and leads)

Excavation for foundation by mechanical means in hard murum including shoring and strutting as necessary and disposing off excavated stuff as directed etc. complete. (Materials including all lifts and leads)

Providing  and  laying  in  situ  M15  CC  of  trap/  granite  /quartzite /gneiss  metal  for  the  bottom  plugs  of  wells  in  the  dry condition including  compaction  and  curing  wherever  necessary  etc. complete.  (with  fully  automatic  micro  processor  based  PLC  with SCADA  enabled  with reversible  drum  type  mixer  with  naturalsand) (for Slab Drain Footing) (Materials including all lifts and leads)

Providing  and  laying  in  situ  controlled  grade  of  M15  of  trapn/granite  /quartzite  /gneiss  metal  for  RCC  works  in  cut  off  walls  / curtain  walls  including  necessary  scaffolding,  centering, compacting  by  vibrator,  finishing  and  curing  etc. complete. (with  fully  automatic  micro  processor  based  PLC  with  SCADAenabled  with  reversible  drum  type  mixer  with  natural  sand,excluding reinforcement) (Abutment/Pier for Slab Drain) (Materials including all lifts and leads)

Providing  and  laying  in  situ  controlled  grade  of  M20 of trapn/granite  /quartzite  /gneiss  metal  for  RCC  works  in  cut  off  walls  / curtain  walls  including  necessary  scaffolding,  centering, compacting  by  vibrator,  finishing  and  curing  etc. complete. (with  fully  automatic  micro  processor  based  PLC  with  SCADAenabled  with  reversible  drum  type  mixer  with  natural  sand,excluding reinforcement) (For face Wall of CD work) (Materials including all lifts and leads)

Providing  tar  paper  bearing  including  laying  in  proper  position (Materials including all lifts and leads)

Providing,  cutting,  bending,  hooking,  tying  and  laying  in position  TMT  FE  500  steel  bars  for  reinforcement  for  all  RCC works as per detailed drawings etc. complete. (Materials including all lifts and leads)

Providing  and  laying  in  situ  M35 controlled  cement  concrete  of trap/  granite/ quartzite/  gneiss  metal  for  RCC  work  in  solid/ deck  slab  etc.  including  ramming,  vibrating,  curing,  formwork, centering  and  finishing  in  cement  plaster  excluding reinforcement  etc.  complete.  (height  up  to  6  meter  with  fully automatic  micro  processor  based  PLC  with SCADA  enabled reversible drum type mixer and natural sand) (Materials including all lifts and leads)

Providing  trap/  granite/  quartzite/  gneiss  rubble  filling  over haunches and arches including hand packing etc. complete. (Materials including all lifts and leads)

Providing and laying in situ M20 RCC of trap/ granite/ quartzite/ gneiss  metal  for  RCC  work  of  ballast  walls,  kerbs  and  boxreturns  including  scaffolding,  compaction,  formwork  finishing and  curing  etc.  complete.  (excluding  reinforcement,  with  fully automatic  micro  processor  based  PLC  with  SCADA  enabled  with reversible drum type mixer with natural sand) (Slab Drain Kerb) (Materials including all lifts and leads)

Providing and laying in situ M20 RCC of trap/ granite/ quartzite/ gneiss  metal  for  RCC  work  of  ballast  walls,  kerbs  and  boxreturns  including  scaffolding,  compaction,  formwork  finishing and  curing  etc.  complete.  (excluding  reinforcement,  with  fully automatic  micro  processor  based  PLC  with  SCADA  enabled  with reversible drum type mixer with natural sand) (Retaining Wall) (Materials including all lifts and leads)

Providing  RCC  railing  of  cast  in  situ  RCC  posts  with  M20  CC  of trap/  granite/  quartzite/  gneiss  metal  for  horizontal  and  vertical members  as  per  detailed  drawings  including  reinforcement,scaffolding,  centering,  formwork, compaction,  finishing  and curing  with  watering  chemical  compound  etc. complete.  (fully automatic  micro  processor  based  PLC  with  SCADA  enabled  withreversible drum type mixer) (Materials including all lifts and leads)

Providing  weep  holes  in  brick  masonry  /plain  /reinforced concrete  abutment,  wing  wall  /  return  wall  with  100mm diameter  AC  pipe  extending  through  the  full  width  of  the structure  with  slope  of  1V:  20H  towards  drawing  face  as  per drawings and technical specifications etc. complete. (Materials including all lifts and leads)

Providing  flexible  apron  of  100  cm  thick  comprising  of  loose stone  boulders weighing  not  less  than  40  kg  beyond  curtain wall etc. complete. (Materials including all lifts and leads)

Excavation for foundation in earth, soil of all types, sand, gravelsand soft murum,including removing the excavated material with all lifts and leads beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. Complete. (Lift upto 1.5 m.) By Mechanical Means (Materials including all lifts and leads)

Excavation for foundation in hard murum including removing the excavated material with all lifts and leads beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift 1.50 m to 3.0m) By Mechanical Means (Materials including all lifts and leads)

Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material with all lifts and leads beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth/murum, ramming ,watering including shoring and strutting etc. complete. (Lift upto 1.5m) By Mechanical Means (Materials including all lifts and leads)

Excavation for foundation in Hard­rock by controlled blasting including trimming and leveling the bed by chiselling where necessary and removing the excavated material and stacking it in measurable heaps with all lifts and leads from the building area including dewatering and back filling with available earth soil /murum watering, ramming etc. complete.(Lift upto 1.5m) (Materials including all lifts and leads)

Filling  in  plinth  and  floors  with  approved  excavated  material  in15cm.  to  20cm.  layers  including  watering  and  compacting  etc.complete. Spec. No. : Bd.A. 11/Page No. 262 (Materials including all lifts and leads)

Providing  dry/  trap/  granite/  quartzite/  gneiss  rubble  stonesoling  15  cm  to  20  cm  thick  including  hand  packing  andcompacting etc. complete. (Materials including all lifts and leads)

Providing  and  fabricating  structural  steel  work  in  rolled  sectionslike  joists,  channels,  angles,  tees  etc.  as  per  detailed  design  anddrawings  or  as  directed  including  cutting,  fabricating,  hoisting,erecting,  fixing  in  position  making  riveted  /  bolted  /weldedconnections  without  connecting  plates,  braces  etc.  andincluding  one  coat  of  anticorrosive  paint  and  over  it  two  coatsof oil painting of approved quality and shade etc. complete (Materials including all lifts and leads)

Providing  and  casting  in  situ  cement  concrete  in  M15  of  trap/ granite/quartzite/gneiss  metal  for  steps  including  steel centering,  plywood/steel  formwork,  compacting,  roughening them  if  special  finish  is  to  be  provided,  finishing  uneven  and honeycombed  surface  and  curing  etc.  complete.  The  Cement Mortar  1:3  plaster  is  considered  for  rendering  uneven  and honeycombed  surface,  only.  Newly  laid  concrete  shall  be covered  by  gunny  bag,  plastic,  tarpaulin  etc.  (Woodencentering  will  not  be  allowed.),with  fully  automatic  micro processor  based  PLC  with  SCADA  enabled  reversible  Drum  Type mixer ... With natural sand. (PCC For Abutment/Pier) (Materials including all lifts and leads)

Providing  and  laying  in  situ  cement  concrete  M­20  of  trap  /granite quartzite/  gneiss  metal  for  R.C.C.  work  in foundations like  raft,  strip  foundations,  grillage  and  footings  of  R.C.C.columns  and  steel  stanchions  etc.  including bailing  out  water,formwork,  cover blocks  compaction  and  curing  roughening  thesurface  if  special  finish  is  to  be provided  (Excluding reinforcement and structural steel) etc. etc. complete, With fully automatic  micro processor  based  PLC  with  SCADA  enabled reversible drum type concrete mixer . With natural sand. (Retaining Wall/Drain) (Materials including all lifts and leads)

Providing  and  casting  in  situ  cement  concrete  in  M­20  of  trap/ granite/ quartzite/  gneiss  metal  for  R.C.C.  pardi  of  required thickness  including  centering,  formwork,  cover  blocks compacting  ,  curing  ,  finishing  &  roughening  them  if  special finish  is  to  be  provided  and  curing  complete.  (Excluding reinforcement  and  structural  steel).  With  fully  automatic  micro processor  based  PLC  with  SCADA  enabled  reversible  drum  type concrete  mixer.  with reversible  Drum  Type  mixer  with  SCADA With natural sand. (Drain/Retaining Wall) (Materials including all lifts and leads)

Providing  second  class  Burnt  Brick  masonry  with  conventional/I.S.  type  bricks  in  cement  mortar  1:6  in  foundations  and  plinthof  inner  walls/  in  plinth  external  walls  including  bailing  outwater  manually  ,  striking  joints  on  unexposed  faces,  raking  outjoints on exposed faces and watering etc. Complete. (Materials including all lifts and leads)

Providing uncoursed rubble masonry of trap / granite / quartzite/  gneiss  stones  in  cement  mortar  1:6  in  foundation  and  plinthof  inner  walls  /  in  plinth  of  external  walls  including  bailing  outwater  manually  ,  striking  joints  on  un  exposed  faces  andwatering etc.complete. (Materials including all lifts and leads)

Providing  sand  faced  plaster  externally  in  cement  mortar  usingapproved  screened  sand,  in  all  positions  including  base  coat  of15  mm  thick  in  cement  mortar  1:4  using  waterproofingcompound  at  1  kg  per  cement  bag  curing  the  same  for  not  lessthan  2  days  and  keeping  the  surface  of  the  base  coat  rough  toreceive  the  sand  faced  treatment  6  to  8  mm  thick  in  cementmortar  1:4  finishing  the  surface  by  taking  out  grains  and  curingfor fourteen days scaffolding etc.complete. (Materials including all lifts and leads)

Providing  tuck  pointing  with  cement  mortar  1:3  for  stone/Brickmasonry including scaffolding and curing etc.complete. (Materials including all lifts and leads)

Providing  and  fixing  machine  cut  mirror  polished  18  mm  to  20mm  thick  telephone  black  granite  /  Amba  White  /  Cat  barybrown  /  RBI  red  /  Ocean  Brown  granite  stone  partition  withrounding the edges etc. complete . Both side polish (Materials including all lifts and leads)

Providing  and  fixing  plain  zinc  sheeting  of  0.80  mm  thick  (22B.W.G.)  over  the  ridge  hip  or  valley  to  galvanized  iron  sheetroofing  including  all  fastening  and  bolt  galvanised  iron  screwsand  bolts,  lead  and  bitumen  washers  etc.  complete.(Weight  of6.8 kg/sq.m.). (Materials including all lifts and leads)

Dismantling  stone  masonry  in  lime  or cement  mortar  including stacking  the  materials  as  directed  with  all  leads,  lifts  etc.complete. (Materials including all lifts and leads)

Removing Np2 and Np3 class pipes including stacking at road side as directed by the Engineer in charge. 900mm dia. And above. etc. complete. (Materials including all lifts and leads)

Providing and laying in situ M:20 cement concrete of trap/ granite/ quartzite/ gneiss metal for reinforced cement concrete caps over piers and abutments, returns, dirt walls with projection including necessary scaffolding, formwork, compacting by vibrating, finishing and curing (excluding reinforcement) etc. complete as directed by Engineer in charge. Spec. No. BR-29 Page No.129. Item No - 1122 (Slab Drain) (Materials including all lifts and leads)