Municipal Corporation Tender

Supplying, Installing, Testing and commissioning of 6 meter Solar LED High Mast Lighting System with 1320 watt module, 6 M long,polygonal raising lowering mast shaft in single section Suitable for wind speed of 180 km/hr MS Structure with 80 micron GI coating structure, Li Ferro Phosphate (LiFePO4) batteries of capacity 12.8 volt 400Ah @ (12.8volt, 100 Ah 4 nos.), White Light Emitting Diode (W-LED)flood light 4*50 watt as per MEDA Work order Specification no: REN/Highmast/2019-20/CR-98/Solar/395 dated 24/01/2020 (inclusive of total system cost including Photo-Voltaic solar modules, Controller, S.S. Rope of AISI 316 Grade,7/19 construction, with two ropes continuous min.6 mm diameter and breaking load capacity min.2000kg*2,balance of systems including cables, Switches/Circuit Breakers /Connectors/ Junction Boxes, mounting structure, earthing, Lightening arrester, cost of civil works, foundations etc. and its installation, commissioning transportation,insurance, comprehensive maintenance charges for five years, applicable fees and taxes etc.) for following Locations/Sites.

Supplying, installing, and erecting solar blinker LED Light - Model Number (EI-STBDN-01) 300mm Dia Amber blinker lamp(with blinker contriller, housing rack and provision for battery), Single lamp night (ON-OFF) 0.5Sec - 1 Sec ,Display color(Red / Amber / Green/yellow),Working Hours 24 Hours,System Voltage 12V / 24V DC,power consumption 5 watt per lamp, Solar PV Module 10W -MNRE & IEC Certified, Battery In built SMF, battery Box , lamp intensity 260 cd ,protection IP 54, cooling natural air cooled,Aspect diameter 300 mm,Dusk to Down Operation Not required as it has to function day and night,Visibility More than 500 meters (as per NHAI standards),Autonomy 4 – 5 days,LED Driver efficiency Greater than 95%,temperature -10 deg. cel to +60 deg.cel,Ideal current consumption Less than 2 mA, Pole 5m height G.I pipe pole 'B ' Class Specs 75mm outer diameter 1.6mm thickness MS yellow powder coated for identification, clamps and necessary accessories including nut and bolts along with Pole, solar panel,panel stand, earthing, C.C Foundation.

Supplying and erecting iron work, sheet metal work consisting of MS sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the site engineer.(6-1-19)