Municipal Corporation Tender

Supplying, Installing, Testing and commissioning of 6 meter Solar LED High Mast Lighting System with 1320 watt module, 6 M long,polygonal raising lowering mast shaft in single section Suitable for wind speed of 180 km/hr MS Structure with 80 micron GI coating structure, Li Ferro Phosphate (LiFePO4) batteries of capacity 12.8 volt 400Ah @ (12.8volt, 100 Ah 4 nos.), White Light Emitting Diode (W-LED)flood light 4*50 watt as per MEDA Work order Specification no: REN/Highmast/2019-20/CR-98/Solar/395 dated 24/01/2020 (inclusive of total system cost including Photo-Voltaic solar modules, Controller, S.S. Rope of AISI 316 Grade,7/19 construction, with two ropes continuous min.6 mm diameter and breaking load capacity min.2000kg*2,balance of systems including cables, Switches/Circuit Breakers /Connectors/ Junction Boxes, mounting structure, earthing, Lightening arrester, cost of civil works, foundations etc. and its installation, commissioning transportation,insurance, comprehensive maintenance charges for five years applicable fees and taxes etc.) for following Locations/Sites.(Without Taxes)

Supplying installing, testing and commissioning Solar street light pole comprising of 12W LED luminaire, 12.8V- 30Ah Li battery, with 75Wp Solar panel, MS Powder Coated Battery Box weatherproof, mounted on 5/80 mm dia. BGrade GI Pole of 6 Mtr. height (5m above ground & 1m below ground), 12W LED Chip of luminaire should be in compliance to IES: LM-80 & Performance parameters of luminaire shall be as per IES LM-79:2008 Or IS 16106 2012); along with brackets, foundation, earthing and necessary accessories complete as per MNRE specification (With 5 Years warrantee).

Supplying and erecting iron work, sheet metal work consisting of CRCAsheets, various sections of iron, plates, chequered plates, rods, bars, MSpipes, etc. for panel board or any other purpose with bending, cutting, drillingand welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match theswitchgears or as per directions by the authority(as per PWD CSR 2022-23 CSR NO.6-1-19)