Mineral Exploration Corporation Limited Tender

Supplying & erecting FRP box of size 250 x 200 x 100 mm, 2.7 mm thick complete on pole/wall

Supplying and erecting Street light bracket made from 40 mm.dia ‘B’ class G.I. Pipe, 0.6m. in length along with pole cap of 300 mm length and 80 mm dia duly welded with provided leads

Supplying & erecting LED 20W tube light fitting (4 feet) with aluminium housing, heat sink, integrated HF electronic driver complete.

Supplying and erecting exhaust fan heavy duty 230 V A.C. 50 cycles 450 mm. 1400 RPM complete erected in position.

Supplying and erecting exhaust fan medium duty 230 V A.C. 50 cycles 225 mm. 1400 RPM with condenser complete erected in position with necessary materials. Fan motor with moisture proof treatment and ‘E’ class insulation.

Providing recess in brick wall suitable for erection of exhaust fan up to 450mm. sweep complete with grouting of nut, bolts,plastering and colour washing to match the colour of the wall for the wall thickness of 225 mm.

Providing and erecting air circulator 600 mm. sweep oscillating type, wall mounting 1440 RPM without speed regulator, overheat protection unit, totally enclosed, flame proof motor suitable for 230/250 volts single phase, 50 cycles A.C. supply, core lead wire and with moisture proof treatment to winding and with ‘E’ class insulation.

Supplying & erecting 20 SWG G.I sheet metal cawl rectangular /round shaped with 25 x 25x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 450 mm.

Supplying & erecting 20 SWG G.I sheet metal cawl rectangular / round shaped with 25 x 25x 3 (mm) angle iron frame, metal mesh to avoid birds entry with necessary material, suitable for exhaust fan of 300 mm

Supplying and erecting 16 / 20 / 25 A starter (modular range) 2 module for AC unit on provided box complete

Supplying, erecting & terminating XLPE armoured cable 3½ core 95 sq. mm. aluminium conductor with continuous 8.35 sq. mm. (10 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe.

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe.

Supplying, erecting & terminating XLPE armoured cable 4 core 6 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in medium class PVC conduit as required : 4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in medium class PVC conduit as required : 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in medium class PVC conduit as required : 2 X 4 sq. mm + 1 X 4 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in medium class PVC conduit as required : 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying & erecting mains with 4x50 sq.mm FR copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places.

Supplying & erecting crimping type copper lugs for cable up to 16 sq. mm. Complete

Supplying & erecting crimping type copper lugs for cable 50 sq. mm. Complete

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.:90 mm dia (OD-90 mm & ID-76 mm nominal)

Supplying and erecting HMS PVC conduit 25 mm dia.with PVC accessories on wall /ceiling

Supplying and erecting HMS PVC conduit 32 mm dia.with PVC accessories on wall /ceiling

Supplying and erecting UPVC reinforced flexible conduit 25 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.

Supplying and erecting UPVC reinforced flexible conduit 31/32 mm in dia. conforming to I.S. with required number of couplings, PVC bushes, check nuts etc. complete.

Supplying & erecting G.I. pipe ‘A’ class 50 mm dia. erected for enclosing XLPE armoured cable on wall/pole

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.:63 mm dia (OD-63 mm & ID-51 mm nominal)

Supplying and erecting PVC trunking (PVC casing-n-capping)of size 32 mm with accessories on wall/ceiling

Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FRLSH grade copper wire, modular type switch, earthing and required accessories

Point wiring for independent plug in PVC trunking (casingcapping) with 1.5 sq.mm (2+1E ) FR grade copper wire, modular type switch, earthing and required accessories

Supplying and erecting PVC Surface modular switch box with double mounting plate for 2 modules duly erected

Supplying and erecting PVC Surface modular switch box with double mounting plate for 6 modules duly erected

Supplying and erecting ISI mark modular type 3 pin 6A multi sockets with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type 3 pin 6 / 16A multi socket with safety shutter, duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ISI mark modular type switch 16 / 20 A with indicator, duly erected on provided plate and box with wiring connections complete.

Providing earthing with copper earth plate size 60 x 60 x 0.315 cm with funnel with a wire mesh for watering and brick masonry block C.l. cover with minimum 25 kg Carbon based environment friendly back fill Ground enhancing compound complete with all materials, testing & recording the results

Supplying and erecting copper strip of required size used for earthing on wall and/or any other purpose with necessary copper clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints

Supplying & erecting cast iron cable indicator plate buried along with route of cable for PVC / XLPE armoured cable

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting hylam sheet/ ebonite sheet 3 mm thick for covering wall entries including cutting, drilling and fixing with nut bolts / screws etc. complete.

Supplying, erecting & marking SPMCB 6A to 32A, C-series (for motor/power) in provided distribution board

Supplying, erecting & marking DPMCB 40A to 63A, C- series (for motor/power) in provided distribution board

Supplying, erecting & marking FPMCB 40A to 63A in provided distribution board

Supplying & erecting CRCA sheet metal one way enclosures suitable for DP MCB /TP MCB /FP MCB erected on angle iron/GI frame complete.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 8 way (4 + 24), Double door

Supplying and erecting blanking plate of suitable size on MCB DB complete.

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.: 200 A, 4 Pole, 36 KA (Ics = 100% of Icu)

Supplying and erecting extended rotary handle for MCCB with adjustable telescopic rod suitable for upto 250 A MCCB complete

Supplying and erecting SS enclosure for MCCB suitable for 125A to 200A MCCB complete

Supplying and erecting terminal spreaders for use on MCCB incoming and outgoing terminal for 4-pole above 100A to 250 A MCCB complete. (Set of 8)

Excavating hard murum / metal road by chiselling for preparing pit for poles stay or earth plates or for laying cables, pipes & clearing the site by removing debris & making the site as required complete.

Making cement concrete foundation in 1:3:6 cement concrete, (20 to 25) mm. stone metal duly plastered with necessary curing for complete.

Providing Round bottom fire bucket of 9 Litres capacity as per IS : 2546 made out of 24 gauge G.I. sheet with extra handle at bottom duly painted white inside and red outside with FIRE Mark, on provided stand/ wall hook complete.

Providing Floor mounting stand for keeping 4 Nos. of FIRE buckets 1500mm in length, 900mm in height frame made out of 30x30x4 mm angle iron with cross supports for legs, welded with 4 hooks and duly painted with one coat of red lead and two coats of silver paint complete.

Providing printed instruction chart for treating persons suffering from electric shock, printed in English & Marathi and duly laminated complete.

Supplying and fixing PVC synthetic elastomer electrically insulating mat with class B insulation conforming to IS: 15652 –2006 & CPRI tested having 2.5 mm thickness upto 11 kV.

Dismantling the existing switchgears, DB, and bus bar of any size complete with/ without board or angle iron frame complete.

Dismantling the existing light, fan, bell, clock,independent plug point, wiring including circuit mains of all types along with accessories etc. complete

Dismantling the existing cables of all types & size above 10 sq mm up to 50 sq. mm.

Supply, installation, testing, commissioning of totally enclosed free standing type moisture & dust free, distribution panel made out of 1.6 mm thick CRCA Sheet complete with following specifications with suitable type of copper strip interconnections from bus bar to termination point, and panel will be duly powder coated. alongwith the MS Stand structure of sufficient strength, height and clearance from ground for mounting panel. The panel shall have the provision of connection of earthing strip. Main Electrical panel Incoming : 01 Nos. Four pole, 200 Ampere Moulded case circuit breaker (MCCB) with rotary handle, 01 Nos. Four pole, 200 Ampere Switch fuse unit with HRC fuse of proper rating with rotary handle, 01 Nos. 0 to 500 Volt ,Digital voltmeter with inbuilt selector switch, 01 Nos. 0 to 500 Ampere, Digital ammeter with inbuilt selector switch and CT's of proper ratings, 01 set of LED indicating lamps with MCB protection of proper rating, 01 Danger Plate of proper dimension BUS-BAR : 300 Ampere TPN Copper busbar alongwith earth bar with coloured Heat sinkable sleeve OUTGOING : 12 Nos. of 63 Ampere, four pole, Miniature circuit breaker (MCB), with 12 set of LED indicating lamps with MCB protection of proper rating, alongwith 0 to 100 Ampere, Digital ammeter with inbuilt selector switch and CT's of proper ratings. 10 No. of 25 Ampere, double pole, Miniature circuit breaker (MCB), with 10 set of LED indicating lamps with MCB protection of proper rating. Panel as described above