Military Engineer Services Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date17 May 2025
Closing Date23 Jun 2025
Tender Amount₹ 3,70,30,041
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
The eligible classes required by a bidder to participate in the tender are 'A Class' and above, 'A' and above, 'Class of Contractor', and Class SS to E for term contracts.
Bid Capacity
... View More
The formula for bid capacity is as follows: - 2 if the bid amount is between 16 and 30 (inclusive)
- 3 if the bid amount is between 31 and 50 (inclusive)
- 4 if the bid amount is 51 or more, with an additional 1 for each item above 51.
Technical Capacity
... View More
The required prior work experience for the bidder includes satisfactorily completion of requisite value works with Central/State Government/ Central/ State PSUs/ AWHO/ AFNHB/ CGEWHO / DGMAP. However, specific values like amount and percentage are not mentioned. The bidder should have completed similar works satisfactorily, and for un-enlisted contractors, they should meet the enlistment criteria of 'A' Class & ‘a (i)’ category contractor. The details of works completed and under progress in MES should be submitted, including the value of the work, but no specific percentage is mentioned. In some cases, contractors one class below the eligible class may also bid if they have previously completed similar works satisfactorily, but the exact value or percentage of similar works completed is not specified.
Costs
EMD
₹ 4,45,500Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_708829_1Tender No
CWE/KKE/TOKEN-05 OF 2025-26Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply only liquid water proofing compound
134.56
279
37651.2336
... More
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
7140
95
683797.7999999999
... More
M & L for non skid ceramic coloured tiles , 7 to 8 mm thick (square or rectangular) area of each tile exc 0.11Sqm but n.exc 0.18 Sqm, laid in floors set and jointed with neat cement slurry including pointing in white cement with pigment to match with the shade of tiles and laid over and including 15mm thick screed bed in cement mortar 1:6, complete all as specified and as directed by Engineer-in-Charge.
400
1626
650768
... More
M&L for Glazed ceramic coloured tiles on vertical surface 600x300x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with the shade of tiles including 10 mm thick cement plaster 1:4 as in backing coat complete all as specified and as directed by Engineer-in-Charge.
1100
1000
1100000
... More
M&L for polished digital ceramic tiles 8-9 mm thick any shade, (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles & laid over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.
5500
1792
9857925
... More
ditto as per item no 08 but on vertical surface including 10 mm thick cement plaster 1:4 as in backing coat complete
140
1719
240713.2
... More
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed by Engineer-in- Charge
255.62
659
168566.0528
... More
S&F 20mm thick Granite (of any type) Slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing and laid over and including 15mm screed bed of CM 1:6 complete all as specified and as directed by Engineer-in- Charge.
60
2785
167115
... More
M&L for 20-25mm thick Machine cut cudappa stone slab as in jambs, pillars, window- cills, cooking platforms, and like laid over & including 15mm thick cement screed bed in CM 1:4 and jointed in grey cement slurry mixed with pigment to match with shade of slab rubbing , polishing complete all as specified and as directed by Engineer-in- Charge.
100
1128
112820
... More
Rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situations.
80
51
4152
... More
M&L for water proofing treatment to RCC sunken slab as under and all as specified and as directed by Engineer-in-Charge
(a) Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc.
(b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar (“ Dr fixit” Pidicrete URP” or equivalent make given under list of Makes.
(c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bath seal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bath seal Grout” or complete all as specified and as directed by Engineer-in- Charge. Nahani traps etc to be fitted securely and the gaps around it to be grouted in the same manner.
(d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bath seal Plus” or equivalent make given under list of Makes. On all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.
(e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproofing coating “Dr Fixit Pidifin 2 K” or equivalent make given under list of Makes. can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely.
298.85
435
129999.75000000001
... More
(f) After 2 to 3 days, sunken portion shall be overlaid with a 50 mm thick concrete M-10 grade (Nominal Mix) using 12.5 mm graded stone aggregate mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete M-5 grade (Nominal Mix) under sunken floor .
(g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc.
-
-
-
... More
S&F in repairs GI pipe 40mm bore as in water spouts pipe complete all as specified and as directed by Engineer-in- Charge by Engineer-in- Charge
50
299
14980.000000000002
... More
S & F in repairs wash down water closet pedestal pattern with seat cover complete set with accessories with P or S trap including connection to drain (or outgoing pipe ) and flushing pipe, antisyphonage pipe etc complete all as specified and directed.
48
2997
143886.72
... More
S&F in repair two way angle cock with flange cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed by Engineer-in- Charge .
48
1080
51840
... More
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed by Engineer-in- Charge
48
423
20320.800000000003
... More
S&F in repairs vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests excluding flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified and as directed by Engineer-in- Charge
24
3176
76246.31999999999
... More
S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings I.e float valve, syphon, flushpipe,brackets complete all as specified and as directed by Engineer-in- Charge
72
1083
78013.44
... More
S & F vitreous china wash basin white counter top circle shape size 380X380X150 mm excluding taps waste chain and plug and porcelain stopper but incl necessary brackets and CP waste coupling and other fittings complete all as specified and as directed by Engineer-in- Charge
48
2000
96000
... More
S & F in repair Pillar cock swan neck chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm bore dia complete all as specified and as directed by Engineer-in- Charge
48
1200
57600
... More
Supply and fix in repair for Vitreous China bowl urinal flat back size 330X250X445 mm wall mounted (minimum), (excluding flushing cistern, flush pipe and waste pipe) including fitting of push cock with exiting GI Tubing fixed in repairs all as per PS complete all as specified and as directed by Engineer-in- Charge
48
2068
99298.08
... More
S&F in repair 32 mm bore PVC waste pipe of approved make suitable for WHB, Urinals etc complete all as specified and directed.
168
223
37574.88
... More
S & F in repair PVC connections 15mm dia with brass nut on both ends and washers 450mm long all complete all as specified and directed.
72
160
11556
... More
S&F in repair Bib tap fancy type cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed by Engineer-in- Charge.
96
541
51987.84
... More
S&F in repair stop valve cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule for 15 mm bore of pipe complete all as specified and as directed by Engineer-in- Charge by Engineer-in- Charge by Engineer-in- Charge.
72
780
56205.36
... More
S&F in repairs Fancy type Stop cock (Concealed) cast copper alloy chromium plated fancy type with crutch or butterfly handle screw down ,screwed both end for iron pipe or or brass ferrule with long shank and cup for 15 mm bore of pipe complete all as specified and as directed by Engineer-in- Charge .
168
1177
197880.47999999998
... More
S & F in repairs Brass chromium plated Shower rose 125mm size with or without swivel joints, brass arm & Flange 125mm size incl fixing to steel pipe fixed in repairs as directed.
72
437
31528.8
... More
S&F in repair Brass chromium plated towel rail 600 mm long of fixed with and including chromium plated brass screw and wooden / plastics cleats complete all as specified and directed.
144
935
134743.68
... More
M&L Urinal spreader of CP Brass for fixing with 15 mm dia pipe fixed in repairs complete all as specified and directed.
48
288
13836.48
... More
S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers
48
593
28484.159999999996
... More
S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
72
257
18537.840000000004
... More
S&F Chromium plated towel ring, brass body, glossy finish complete all as per of Hindware or equivalent make given under list of makes complete all as specified and as directed by Engineer-in- Charge .
48
800
38400
... More
S&F in repair Brass CP Wall mixer for mixing hot & cold water screwed down for pipe and fixed for 15mm bore dia of pipe complete all as specified and as directed by Engineer-in- Charge
24
1933
46406.399999999994
... More
S&F in repairs Shelf of glass Corner Shelf 6 inch fixed with and including Chromium plated brass screws and wooden/plastic/ss cleats complete all as specified and as directed by Engineer-in- Charge
48
364
17513.28
... More
S&F PVC (SWR) floor trap square type with CP grating with or without hole including provision of jointing to waste pipes of outlet 75 mm, complete all as specified and as directed by Engineer-in- Charge
24
240
5778
... More
S&F in repairs Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws complete all as specified and directed by Engr-in-charge.
48
80
3860.6400000000003
... More
S&F in repairs 75 mm bore Cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate , complete all as specified and as directed by Engineer-in- Charge
144
353
50846.4
... More
S&F in repairs stainless steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples including necessary beading all as specified and directed by Engr-in-charge.
168
558
93780.96
... More
Cleaning the surface with wire brush, detecting sources of leakages and removing/taking down unsound treatment/surface and M&L for carrying out non-destructive waterproofing treatment to sunken portion of slab, floor and walls of bath, WC, WHB and floor traps (combined unit) by using construction chemical method as hydrophobic PU grouting, etc, with first course of injection MDI based PU foam and second course of injection PU plain all as per manufacturers instruction, etc, complete and as directed. The PU foam shall have 100% solids and solvent free, and shall expand 30-40 times its volume at liquid stage in presence of water, the PU plain injection shall have minimum 100 CPS viscosity and shore hardness minimum 50. (Make: PIDILITE or equivalent make given under list of makes) complete all as specified and directed and M&L for fixing packer for hydrophobic PU foam and Sealer as per manufacturers instruction .
250
600
150000
... More
M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tile with heavy duty tile cleaner preferably of M/S Pidilite or equivalent cleaner as approved by GE, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent make as approve by GE, curing, cleaning the surface etc, complete all as directed by Engr-in-Charge and as per the sample done at ground level.
250
300
75000
... More
Taking down chowkhats or with shutter (without taking off shutter from the frames) & removing from site exc. 1.5 Sqm but n. exc. 4 Sqm each etc complete all as specified and as directed by Engineer-in- Charge
192
382
73403.52
... More
Taking down chowkat or with shutter (without taking off shutter from the frames) & removing from site n.exc. 1.5 Sqm each etc complete all as specified and as directed by Engineer-in- Charge
764
302
231262.8
... More
Taking down shutters of any description exc. 1.0 sqm and not exc. 2.0 sqm each complete all as specified.
10
95
955.5
... More
S & F factory made box type steel window composite type with double rebate pressed steel frame 80mmx60mm (peripheral) and 80mmx75mm (intermediate members) including grill using 10sqmm bar, made out of cold rolled 1.25mm thick sheet having steel window/ventilators double shutter of MS tubular section of size 50mmx20mmx1.1mm thick fixed with box type hinges including 12mmx3mm MS flat as beading for glazed and wire shutter handle of 100mm MS hollow tubular section as beading for wire and putty for glazing shutter handle of 100mm size made of z section 01 no, MS stove enamelled black tower bolt of size 120mm, 02 nos, 150mm mild steel hooks and eyes, each shutter flat iron 40mmx1.25mm and 200mm long hold fast 04 nos each window including filling with PCC M-10 grade (Nominal Mix) complete all as specified and as directed by Engineer-in- Charge by Engineer-in- Charge including one shop coat of red oxide on preparation of steel surface.
Ref DRG NO : CESZ/TD/195 given under Particular Specifications
750
2800
2100000
... More
S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed by Engineer-in- Charge .
650
513
333495.50000000006
... More
S & F, plain sheet glass 4mm thick, ordinary quality, not exc 0.50 Sqm in each pane fixed to steel window/frame with oil putty and securing pins, spring clips etc complete all as specified and as directed by Engineer-in- Charge .
100
728
72835
... More
S&F 105x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and as directed.
20
363
7267
... More
S&F 125x60 mm pressed steel frames made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed all as specified and as directed.
515
393
202405.3
... More
M&L for PCC M-15 grade (nominal mix) using 12.50mm graded stone aggregate as in filling of pressed steel chowkat all as specified and directed
15
9907
148613.4
... More
S&F factory made 35 mm thick plain framed panelled shutter (single panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with Commercial veneered on both faces the size of rail and style as per IS-1003 ( Pt-I) kiln seasoned and Chemically pressed of 2nd class hard wood complete all as specified and as directed by Engineer-in- Charge
210
2949
619474.8
... More
S & F factory made 35 mm thick glazed & skeleton shutter of 2nd class hard wood open rebated and prepared to receive gauge (divided into squares with sash bars) edges of framing plain chamfered or rounded, fitted without & fitted beads for securing glass etc, sizes of members of shutters as specified in SSR Pt-I Sec-8 clause 8.24 (a) and fitted to chowkat complete all as specified and directed by Engr-in-charge
210
2002
420424.2
... More
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.
354
484
171587.34
... More
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
110
2566
282315
... More
S&F Butt Hinges medium weight cold rolled mild steel 100 mm long complete all as specified and as directed by Engineer-in- Charge by Engineer-in- Charge
800
94
75928
... More
S&F 150mm long Aluminium anodized, barrel tower bolt of extruded section complete all as specified and as directed by Engineer-in- Charge
300
82
24654.000000000004
... More
For Aluminium anodised, barrel tower bolts of 100mm length, of extruded section and fixed complete all as specified and as directed by Engineer-in- Charge
100
62
6281
... More
S&F for Extruded aluminium alloy handles 150 mm, fabricated type, anodised complete all as specified and as directed by Engineer-in- Charge
1060
94
100032.20000000001
... More
S&F for mild steel sliding door bolts, plate type, with stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long complete all as specified and as directed by Engineer-in- Charge
318
395
125622.72
... More
S&F for mild steel sliding door bolts, plate type, with stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 200mm long complete all as specified and as directed by Engineer-in- Charge
742
209
155530.62000000002
... More
Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required or removed from site.
200
32
6473.999999999999
... More
Taking up or down 20 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required or removed from site.
150
39
5877
... More
Taking up or down 25 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required or removed from site.
75
43
3225.75
... More
Supplying & fixing to walls and ceiling 15 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed by Engineer-in- Charge by Engineer-in- Charge.
200
153
30602
... More
Supplying & fixing to walls and ceiling 20 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed by Engineer-in- Charge by Engineer-in- Charge.
150
180
27124.500000000004
... More
Supplying & fixing to walls and ceiling 25 mm nominal bore, medium grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed by Engineer-in- Charge
75
209
15729
... More
S & F 110 mm bore PVC (SWR) pipe Type B single socketed in any length with rubber ring joints laid in trenches, floor and wall including taking down old unserviceable pipe any description and any type complete all as specified.
80
431
34551.2
... More
S & F 75mm bore PVC (SWR) Pipes Type B single socketed in any length with rubber ring joints laid in trenches or in floors or wall including taking down old unserviceable pipe any description and any type complete all as specified.
60
250
15025.199999999999
... More
S & F in repairs 75mm bore of outlet PVC (SWR) floor trap , plain with grating doom 125mm dia with waste hole of PTMT, including jointing with solvent cement .
50
310
15540.5
... More
S & F in repairs 110mm bore PVC (SWR) bends any radius with rubber ring joints all as specified and directed.
30
133
4012.5
... More
S & F in repairs 75mm bore PVC (SWR) bends any radius with access door all as specified and directed.
45
117
5296.5
... More
S & F in repairs 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal
10
591
5912.4
... More
S & F in repairs 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal
8
453
3625.6
... More
S&F in repairs 75mm bore PVC (SWR) junction single (Single T) equal or unequal.
8
417
3340.7968
... More
S&F in repairs 110mm bore PVC (SWR) junction single (Single T) equal or unequal.
8
539
4314.48
... More
S&F in repairs 110mm bore PVC (SWR) vent cowl.
8
123
984.4
... More
S&F in repairs 75mm bore PVC (SWR) vent cowl.
8
101
813.2
... More
Supply and fix 1000 litres capacity triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position with embossment of ISI mark including dismantling and removing of old tank complete all as specified and as directed by Engineer-in- Charge .
12
9952
119425.92
... More
S&F in repairs Stainless steel fancy type curtain rod 25 mm including SS brackets, decorative knobs, and including separate projected SS brackets, separate decorative knobs and including all necessary fittings such as rawl plug screws complete all as specified and as directed by Engineer-in- Charge.
1200
100
120000
... More
Taking down cement or cement lime plaster from brick / PCC block/ stone masonry walls etc including racking out joints, hacking for key scrubbing down with water etc, complete all as specified and as directed by Engineer-in- Charge by Engineer-in- Charge by Engr-in-charge .
200
101
20318
... More
M&L for rendering 15mm thick on block masonry surfaces or surface other than fair face of brick work or on side of lathing in cement plaster 1:6 complete all as specified and as directed by Engineer-in- Charge
100
300
30094
... More
M&L for preparing newly plastered surfaces of walls and applying two coat of oil emulsion distemper over a coat of alkali resistance primer complete all as specified and as directed by Engineer-in- Charge
100
108
10861
... More
M & L for preparing old plastered or unplaster surfaces of wall and applying two coat of oil bound distemper complete all as specified and as directed by Engineer-in- Charge
12248
72
893736.5599999999
... More
M&L preparation of old plastered or unplastered surfaces of wall and applying two coat of cement base paint including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed by Engineer-in- Charge
11268.57
76
866891.0901
... More
M&L rendering 5 mm thick in CM 1:3 on concrete surface of ceiling & finished even & smooth without using extra cement complete all as specified and as directed by Engineer-in- Charge
50
199
9970.5
... More
M & L for rendering 10 mm thick on fair faces brick work /PCC block masonry or concrete surface of wall using cement plaster 1:6 and finished even and smooth (without using extra cement) complete
50
246
12330
... More
M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of Alkali resistant primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed by Engineer-in- Charge by Engineer-in- Charge.
50
112
5628
... More
M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.
50
32
1626.5
... More
M&L for preparing old plastered or unplastered surfaces of walls brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts, trading oil, greasy spot and applying three coat of white wash on ceiling complete all as specified and as directed by Engineer-in- Charge by Engineer-in- Charge.
7671.23
34
267572.5024
... More
M&L for applying wall care putty not less than 1 mm thick on wall over plastered surface to prepare the surface even and smooth complete all as specified and directed by Engr-in-Charge.
12248
44
546750.72
... More
M&L preparation of new steel surfaces of any description exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed by Engineer-in- Charge.
1500
97
146370
... More
M&L preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in- Charge.
400
79
31888
... More
M&L preparation of new wooden surfaces of any description exceeding 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in- Charge.
350
116
40932.5
... More
M&L preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed by Engineer-in- Charge.
96.5
70
6845.71
... More
M&L for 20-25 mm thick machine cut machine polished Kota stone flooring and jointed with grey cement slurry mixed with pigment to match with shade of kota stone and laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all specified and directed.
2372.5
1318
3129280.05
... More
M&L Mirror polishing on Kota stone work to give high gloss finish complete all specified and as directed.
2372.5
208
494784.875
... More
Ditto as per ser No 96 but on step riser skirting over and including 10mm thick rendering in CM 1:4 complete.
Note:- Kota stone slab in single piece shall be used in steps
23.73
1357
32223.916200000003
... More
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for and removing the demolished concrete to low laying area out side the premises complete all as specified and directed (below or above GL)
31.5
1745
54982.935
... More
M&L for 75 mm thick PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate as in Plinth protection complete all as specified and directed
300
472
141786
... More
Cutting chases, pinning & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block walls complete.
300
63
19068
... More
M&L for providing 25 mm thick Cement concrete M-15 grade (Nominal Mix) using 20 mm graded stone aggregate in level course for receiving floor tiles complete all as specified & directed
8272.5
192
1595020.725
... More
Excavating in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth; for foundation etc or for manholes, laying pipes etc and getting out in hard / dense soil.
60
708
42525
... More
Demolition of precast concrete block walling built in cement mortar as in manhole including PCC coping complete all as specified and directed .
12
1834
22010.16
... More
Demolition of reinforced cement concrete manhole covers n. exc. 15cm thickness below or above Ground level.
3
1713
5140.5
... More
M&L for cement concrete M-10 grade (Nominal Mix) using 40 mm graded coarse aggregate as in concrete bed to drain pipes including packing under & hunching against sides of pipes after they are laid and tested for 200 mm complete all as specified and as directed.
120
680
81621.59999999999
... More
M&L cement concrete M-7.5 grade (Nominal Mix) using 40 mm graded coarse aggregate in foundations filling & mass concrete complete all as specified
13
5757
74844.38
... More
M&L for reinforced concrete pipes, 200 mm bore, Class NP-2, laid and jointed complete with collars.
120
446
53550
... More
M&L for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete
12
8861
106338.95999999999
... More
M&L for PCC M-15 grade (Nominal Mix) using 20 mm graded coarse aggregate in coping including necessary formwork and benching in bottom of manholes drain etc complete all as specified and directed..
6
9722
58334.22
... More
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.
15
45
682.8000000000001
... More
Add or deduct for each 25 mm girth or part thereof over or under 30cm ditto all as per item No.111.
30
10
316.5
... More
Returning, filling, including spreading levelling, watering and well ramming in layers not exc 25cm complete all as specified and directed by Engr-in-Charge.
73.2
146
10691.592
... More
Removing excavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5 m above the starting point.
25
336
8410.5
... More
M&L for precast cement concrete M-15 grade (Nominal Mix) using 20 mm graded coarse stone aggregate in cover slab set in CM 1:6 complete all as specified and directed.
43.2
11588
500629.248
... More
M&L for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bend to shape required, including cranking, bending and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.
200
88
17756
... More
Cutting existing GI water pipe line 50/80 mm dia in position for inserting tee/specials for branch connection of 50 mm size complete all as directed.
2
149
299.7
... More
M&L for Laying in trenches/fixed to wall galvanised steel water tubing 25 mm bore, medium grade with and including all medium grade fittings complete all as specified.
50
287
14399
... More
M&L for Laying in trenches/fixed to wall galvanised steel water tubing 40 mm bore, medium grade with and including all medium grade fittings complete all as specified.
30
618
18556.199999999997
... More
S&F in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipes 25mm bore complete all as specified and directed.
2
916
1832.18
... More
S&F in repair gun metal gate valve with iron wheel head, screwed both ends for iron pipes 40mm bore complete all as specified and directed.
2
1224
2449.1
... More
Taking down copper/aluminium point wiring ( light, fan, socket, power ) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately ) and making good disturbed surface of walls, floors, etc
1389
162
225906.96
... More
Taking down carefully unserviceable Sub main wiring of any size and type, removing material from for taking credit and making good the disturbed surfaces of walls, ceilings etc
1200
23
28200
... More
Taking down old and unserviceable main incoming MCB DB TPN/ main switch including MCCBs/MCBs and making good the disturbed surface all as directed specified and directed.
256
21
5414.4
... More
M & L for point wiring with two single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm (Nominal area) drawn in and including PVC casing capping of required size with all fittings and accessories along with one single core green colour PVC insulated 1100 volt grade multi stranded FRLSH Copper conductor cable of size 1.5 sqmm as earth lead and connected to earth dolly for one light point or one fan/Ex fan point controlled by one, one way switch including PVC switch board of required size or 3mm thick hylam sheet screwed with 04 nos cadmium coated screws & cup washer on existing MS concealed box for mounting of switch, regulators or bell push and casing capping terminal box for mounting ceiling rose/ holders etc all as specified and directed by Engr-in-Charge.
-
-
-
... More
One three pin 5 Amp socket outlet on independent board
932
1062
990007.68
... More
One three pin 5 Amp socket outlet on independent board
300
1145
343599
... More
One three pin 5 Amp socket outlet on same board
116
303
35262.840000000004
... More
All as per item No 125.00 but FRLSH copper stranded cable of size 4.00 sq mm for 3/6 pin socket outlet 15 amp on one independent board. along with all fitting and accessories complete all as specified and directed by Engr-in-Charge.
37
2065
76428.68
... More
All as per item No. 125 but one light point controlled by two 2-way switches.
4
1495
5983.28
... More
M & L for sub main wiring with two single core PVC insulated multi stranded FRLSH Copper conductor cable of size 6 sqmm drawn through in and including PVC Conduit of suitable size with all accessories and one single core green colour FRLSH Copper conductor cable of size 6 sqmm as earth wire and connected to earth dolly and making good to disturbed surfaces .
NOTE: -Two run of 6 sqmm Copper conductor cable with one run 6 sqmm earth wire and one run of PVC Conduit of suitable size shall be be measured as one unit length.
850
277
235738.99999999997
... More
M & L for sub main wiring with four single core PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 10 sqmm (Nominal area) drawn through in and including PVC conduit suitable size with all fittings and accessories along with one single core green colour PVC insulated unsheathed 1100 volt grade multi stranded FRLSH Copper conductor cable of size 10 sqmm as earth lead and connected to earth dolly incl dismantling taking down old unserviceable wiring and making good to disturbed surfaces all as specified and directed. NOTE: -Four run of 10 sqmm Copper conductor cable with one run 10 sqmm earth wire and one run of PVC Conduit of suitable size shall be be measured as one unit length.
350
605
211883
... More
S&F 5 Amp switch Piano flush type single pole one way all as specified and as directed by Engr-in-Charge.
1348
129
174242.47999999998
... More
S&F 5 Amp switch piano type two way all as specified and as directed by Engr-in-Charge.
8
137
1100
... More
S & F Angular Lamp holder of PVC/ Polycarbonate type with back plate all as specified and as directed by Engr-in-Charge.
150
178
26724
... More
S&F socket flush type 6 amps, 5 pin, 230v all as specified and as directed by Engr-in-Charge.
416
139
57911.36
... More
S&F switch socket combination multipurpose 2-in-1 flush type 3 pin 16 amps and 3 pin 6 amps, 230v
37
405
15004.609999999999
... More
S&F ceiling rose surface Bakelite three terminal complete all as specified and as directed by Engr-in-Charge.
817
70
57435.1
... More
S&F Sheet metal enclosure SPN 08 way (MCB DB) Double door, 240 Volts AC all as specified and as directed by Engr-in-Charge.
29
2046
59351.11
... More
S&F Sheet metal enclosure SPN 12 way (MCB DB) Double door, 240 Volts AC all as specified and as directed by Engr-in-Charge.
7
2423
16964.08
... More
Supply & fixing sheet metal enclosure double door DBs triple pole and neutral vertical type 415 Volts 4 way (TPN) 16 KA with suitable frame four pole125 Amps in coming MCCBs,bus bars, neutral links, blanking plates IP 43 protection class.
Note:-Incoming MCCB & out going MCB shall be measured and paid separately under relevant item of this BOQ.
4
14734
58936
... More
M & L MCCB 4 pole, 16 KA breaking capacity, Ics = 100% Icu as per IEC 60947-2, with Thermal magnetic release, 125 amps.
4
9400
37600
... More
S&F MCB TPN 16 to 32 Amps, 415 volt 10 KA complete all as specified and directed by Engr-in-Charge.
16
1841
29463.52
... More
S&F MCB, SPN (Double Pole) 32 amps, 240 Volts, 10 KA ‘’C” curve all as specified and directed by Engr-in-Charge.
36
910
32788.08
... More
S&F MCB, Single Pole, 5 to 32 amps, 240 Volts, 10 KA breaking cap, ‘’C” curve all as specified and directed by Engr-in-Charge.
200
314
62916
... More
S&F repairs LED Light batten 20 watt, 4 feet AC sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge.
500
1396
698175
... More
S&F in repair LED Light batten 10 watt, 2 feet AC sleek and seamless profiled extruded polycarbonate batten with an efficient diffuser to illuminate work and retail spaces with three core flexible copper conductor cable from ceiling rose complete all as specified and directed by Engr-in-Charge.
60
1449
86979
... More
S&F LED lamp 12 watt, CDL, B-22 (Pin type), 230V, PF-0.95 (min) all as specified and directed by Engr-in-Charge.
150
323
48469.5
... More
Supply and fixing in repairs LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed by Engr-in-Charge.
15
3173
47608.35
... More
Supply and fixing in repairs ceiling fans complete with blades, down rods, and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.0 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-Charge. Note - Old UNSV ceiling fan deposit to MES store
226
2834
640694.1799999999
... More
Supply and fix in repairs exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers incl making of suitable hole in brick / stone wall for fixing of Exhaust Fan and making good the disturbed surface to match with existing surface complete all as directed by Engineer-in-charge.
Note - Old UNSV Exhaust fan deposit to MES store
16
3796
60750.08
... More
Material and labour for earthing complete with GI earth plate 600mm x 600mm x 6 mm thick electrode buried directly in ground (earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metres below normal ground level connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 of MES schedule Part-I and including 15 mm bore light grade GI protection pipe (upto 7.5 metres beyond outer edge of earth pit) PCC M-10 grade (Nominal Mix) using 40mm graded stone aggregate in pit with 40mm thick RCC cover in reinforced cement concrete M-15 grade (Nominal Mix) using 20mm graded stone aggregate, reinforced with 8mm dia bar both way @ 150mm c/c, watering arrangement with funnel and wire mesh and 20 mm bore light grade GI watering pipe, common salt and charcoal filling, necessary excavation and earth work complete including taking out old earthing material complete all as specified and as directed by Engineer -in-Charge
4
7156
28626.36
... More
Supply, laying and testing cable XLPE insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable (heavy duty )1100 volts grade with stranded aluminium conductor of size 3.5 core 120 sq mm all as directed by Engineer-in-charge
85
725
61704.049999999996
... More
Supply, laying and testing cable XLPE insulated screened pvc bedded galvanised steel strip or wire armoured electric power cable (heavy duty )1100 volts grade with stranded aluminium conductor of size 3.5 core 35 sqmm all as directed by Engineer-in-charge
140
302
42296.8
... More
Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for laying UG cable, pipe line etc and getting out in soft / loose soil complete all as specified and directed.
18.2
177
3234.868
... More
Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for laying UG cable, pipe line etc and getting out in soft disintegrated rock complete all as specified and directed.
6.1
1727
10534.944
... More
Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground cable of size 50 mm outer dia with all fittings such as clamps. coupler etc laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified
Note:-Excavation and earth work shall be measured and paid separately under relevant item of this BOQ
115
50
5796
... More
Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground cable of size 120 mm outer dia with all fittings such as clamps. coupler etc laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified .
Note:-Excavation and earth work shall be measured and paid separately under relevant item of this BOQ
80
157
12633.599999999999
... More
M&L for road cutting upto 300mm deep and 200mm wide for crossing GI water pipe line through road including making good the disturbed surface by filling mass concrete complete all as specified and directed.
Note:-Concrete shall be measured and paid separately under relevant item of this BOQ
12
361
4341.12
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%