Military Engineer Services Tender

Material and labour for preparation of old plastered or unplastered surfaces of wall/ceiling/chajjas and applying one coat of weather proof exterior emulsion paint complete all as specified and as directed. Note :- Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building.

Material and labour for preparation of old plastered or unplastered surfaces of wall/ceiling/chajjas and applying one coat of cement based paint complete all as specified and as directed. Note :- Rate quoted shall be deemed to be included for scaffolding up to 15 mtr height building.

Material and labour for preparation of old plastered or unplastered surfaces of wall and applying one coat of oil bound emulsion distemper of approved tint complete all as specified and as directed.

Material and labour for preparation of old painted wooden surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M & L for preparation of old Cheakered tiles or paver block and applying two coat of apex tiles guard paint complete all as specified and directed

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces of wall in CM 1:6,including taking down old cement plaster.complete all as specified and directed by Engineer-in-Charge.

Material and labour for 15mm thick cemet plalster in CM 1:4 over wall / concrete surfaces finished even and smooth without using extra cement,including taking down old cement plaster, complete all as specified and directed by Engineer-in-Charge.

M&L for 5mm thick rendering on concrete surface of ceiling in CM 1:3 and rendering is to be finished even and smooth with out using extra cement,including taking down old cement plaster.complete all as specified and directed by Engineer-in-Charge.

Material and labour for water proofing treatment of external walls, chajjas and newly plaster surfaces by applying two coats of elastomeric coating material after clearing the surfaces thoroughly and sealing all cracks with acrylic sealing compound complete all as specified and as directed. MAKE :- Dr FIXIT / PIDILITE / FOSRAC /EXCOT

M & L for Preparation of old painted surfaces of steel and iron of any description, over 10 cm in width or girth, not otherwise described include for all necessary preparatory work required and applying one coat of Aluminium paint complete all as specified and directed by Engineer in charge.

M & L for Writing Letters or figures (Block,Roman,Italic or Indian) n.exc 30cm high complete all as specified and as directed by Engineer in charge

M & L for applying 1.5 mm thick wall care putty on wall/ Ceiling sufaces complete all as specified and as directed by Engr-in-Charge . NOTE FOR ALL PAINITNG AND WATER PROOFING ITEMS :- The following precautionary measures shall be ensured by the contractor before and during execution of the work :- (i) All the painting works and water proofing works shall be got executed through original material manufacturing company or their authorised applicators as approved by GE (ii) Contractor shall deposit entire quantity of materials (proprietory materials) in sealed containers required for painting works covered under subject contract in the custody of Engineer-In-Charge/ Office in charge of unit. (iii) The materials as required shall be issued to contractor by JE/ Engineer-In-Charge on daily basis and the empty containers/ bags shall be deposited in the store of Engineer -In-Charge by the contractor, for verification as per standard consumption/ coverage prescribed by the manufacturers. (iv) After completion of painting work contractor shall remove and clean all the droplets/stain of paint left on the floor, glasses and joinery.