Military Engineer Services Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Civil And Construction
Drainage Work
Eprocure
Opening Date18 Mar 2025
Closing Date16 Apr 2025
Tender Amount₹ 5,79,57,000
Technical
Technical
Financial
Class Of Bidder
... View More
Class 'A'
Technical Capacity
... View More
The bidder is required to have prior work experience of completing similar works, specifically STP (Sewage Treatment Plant) works, within the last 7 years. The experience criteria are as follows: - One similar completed work costing not less than Rs 4.64 Crores.
- Two similar completed works costing not less than Rs 2.90 Crores.
- Three similar completed works costing not less than Rs 2.32 Crores. The value of previously completed works should be enhanced at 5% per year to bring them at par with the present cost. Additionally, the average annual financial turnover during the last three years, ending 31st March 2024, should be at least Rs 6.26 Cr.
Costs
EMD
₹ 6,14,785Document Cost
₹ 3,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_681835_2Bid Award Id
ViewTender No
CA NO. CEBZ / PUL / TOKEN / 07 OF 2024-25Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(f) MCCB 25 Amp, 3 Pole , LT 415 V, with breaking capacity 16 KA- 03 Nos – (02 Working + 01 Standly) Service Water Pumps – 02 Nos. with direct on line starter for 2.2 KW Motor – 4 Nos.
(g) MCCB 25 Amp, 3 Pole, LT 415 V, with breaking capacity 16 KA – 08 Nos (Nacl Pumps – 02 working + 01 Stand by, Agitator – 01, Sludge Treatment Pump – 02 Nos, Filtration Pumps – 02 Nos) with direct online starter for 1.1 KW Motor – 08 Nos.
(o) MCCB 3 pole, 415 V, fixed type, 125 Amps with breaking capacity 16 KA (for APFC Panel 50 KVAr capacitor bank).
(p) MCCB 32 Amp, 3 pole, LT 415 V, with breaking capacity 16KA – 03 Nos – (02 Working + 01 Stand by) Power for sludge treatment – 01, Aux supply – 01, 01 spare).
(q) MCB 16 Amp, single pole, LT 230 V, 10 KV – 06 Nos.
(h) Digital Ammeter with CTS and voltmeter digital type with LED indication lamps for all incoming and out goings.
-
-
-
... More
Lump sum price worked out by the contractor for ROAD PATH AND CULVERT WORKS as listed in Schedule ‘A’ Part- VI (Ref prepriced schedule attached seperately)
1
913280
-
... More
GENERAL SUMMARY
-
-
-
... More
5 Core 2.5 sq mm.
550
-
-
... More
S&F cable path indicator for LT made out of cast iron plate of 100mm dia, 6mm thick engraved with “LT Cable” welded to MS angle 50 x 50 x 6mm, 75cm long embedded in PCC block (1:3:6) type C-2 of size 30 x 30 x 30mm including painting with two coats of blue colour synthetic enamel paint over one coat of red oxide primer and necessary earth work complete all as specified and as directed.
30
-
-
... More
Supply and fixing junction box 100% weather proof, pole mounted, have cable entry from sides or bottom, hinged door with locking arrangement for entry and fixed three phase four wire cable of size 250 x 200x 105 for cable entry 10 Sqmm cable with two Nos 30 A four way connector and one number MCB of 5 to 30A pre wired with copper conductor GS-JB-3020 (1) including providing wiring form junction box fitting through pole holes with 03 core 1.5 sqmm PVC insulated multi stranded copper conductor and connecting complete all as specified and as directed.
8
-
-
... More
STP E/M PORTION WORKS NOTE:- For items of STP E/M Portion notes given at the beginning of Sch ‘A’ Part-X (STP E/M PORTION WORKS ) shall also be applicable.
-
-
-
... More
S&F of Control cables PVC insulated copper conductor, armoured cables buried under ground/on surface/rack including glanding & terminating with accessories complete all as specified and as directed for the following size of cables:-
-
-
-
... More
EXTERNAL ELECTRIC SUPPLY WORKS NOTE:- For items of EXTERNAL ELECTRIC SUPPLY WORKS notes given at the beginning of Sch ‘A’ Part-V (EXTERNAL ELECTRIC SUPPLY WORKS) shall also be applicable.
-
-
-
... More
S&F DI specials K9 type for spigot and socketed pipe of any size and any type such as Tees, bends, collars, Reducers, tappers, blank plate, MJ adapters etc suitable from 100 mm to 300 mm dia pipes complete all as specified and as directed.
1750
-
-
... More
2. For Pumping Machinery from MBBR 2 to Pre Anoxic Tank
Supply, installation, commissioning and testing upto entire satisfaction, three phase, 50 Hz, 415V, submersible pump set non clogable type with discharge of pumpset not less than 60 liters/second, head of pump 12 to 24 metres and capacity 10KW/12.5 HP including necessary foundation, electric connection from panel and pump, clamping and fixing arrangement frame work for fixing – 01 No for sewage pumping arrangement with and including suction butterfly – 1No, discharge butterfly valves- 1No, Non return valves 1No, foot valve of required gauge – 1No, from MBBR2 to Anoxic Tank complete all as specified and directed.
2
-
-
... More
S&F Valve, globe conforming to IS 9338, supplied and installed complete of size 80mm dia pipe including jointing material complete all as specified ans as directed.
21
-
-
... More
(vi) Foundation/ Plinth/ Base: Shall be provided as per manufactures recommendations, however minimum 1 Mtr space should be available all around the set and height of plinth shall not be less than 0.5 Mtr from ground level... (vii) Diesel storage tank as per manufacturer specification. (viii) MISC : Tool kit, operation and maintenance catalogue spare part list, overhauling manuals, guarantee card etc shall be provided as per manufacture standard practices.
-
-
-
... More
Supply, install, test and commission CPRI approved cubical type LT Feeder pillar box indoor type mounted on pedestal factory made, totally enclosed with necessary ventilation weather, dust and vermin proof (also to confirm IP-54 standard), front and rear opening and compartmental type, with bus bar chamber, half turn nobs for doors, feeder pillar type locking arrangement made of MS angle iron frame work and CRCA sheet of 2 mm thick as per IS 8623 duly painted with powder coated colour of approved shade after minimum seven tank treatment process. The panel shall be suitable for 415 volts, 50 HZ, 3 phase 4 wire system and shall be complete with suitable capacity aluminium bus bar (1.5 time the incoming switch gear current rating) with suitable size copper conductor duly insulated with PVC coloured heat shrinkable type sleeves, thimble glands internal copper wiring for meters (for STP Electric Supply) including PCC foundation complete all as specified and as directed with the following accessories.
Contd...
1
-
-
... More
Supply and installation of Pump set, verticle multistage inline pump, electric driven, 30KW/40HP, 3 phase 370-440 volts, including PCC foundation and electric connection and testing upto entire satisfaction complete all as specified and directed (01 working + 01 stand by = 02 Nos) For treated water pumping).
2
-
-
... More
M&L for construction of 200mm thick PCC solid block masonry valve chamber size 900mm x 900mm x 900mm buit in CM 1:6 with 150 mm thick PCC foundation 1:2:4 type B-1, coping 50 mm thick finished even and smooth, rendering 10mm thick in cement motar (1:6), finished fair and even externally including excavation earthwork in any strata, 3mm thick MS sheet cover fixed on angle iron frame embedded in PCC coping with locking arrangement and mild steel hold fast, mild steel handles and painting to steel surface with two coats of black bituminous paint over one coat of red oxide etc, and white washing three coats on newly, plastered of undecorated surfaces complete all as specified and directed by GE
Note;- 01 Nos has considered under External water supply and 27 Nos. Have considered under recycling of treated water.
28
-
-
... More
All as per item No 7.01 above but 450mm dia.
300
-
-
... More
4. For Pumping Machinery from Filter Feed Tank to Pressure Filter.
Supply, installation, commissioning and testing upto entire satisfaction, three phase, 50 Hz, 415V, submersible pump set non clogable type with discharge of pumpset not less than 20 liters/second, head of pump 12 to 24 metres and capacity 5.5KW/7.5 HP including foundation clamping and fixing arrangement sewage pumping arrangement with and including suction butterfly valve – 1No, discharge butterfly valve- 1No, Non return valve-1No, foot valve of required gauge – 1No from Filter Feed Tank to Pressure Filter complete all as specified and directed.
2
-
-
... More
Supply, erect, test and commissioning of Poly dosing pump 12 Ltr/ Hr with motor and starter and ELECTRICAL CONNECTIONS WITH 200 Ltr HDPE tank with agitator made out of SS 304 grade, piping valves and connected item including foundation clamping and fixing arrangements complete all as specified and as directed.
1
-
-
... More
Lump sum price worked out by the contractor for BUILDING WORKS as listed in Schedule ‘A’ Part- I (Ref prepriced schedule attached seperately)
1
8991584
-
... More
All as per item No 8.17 here-in-before but MS black pipe 100 mm dia.
100
-
-
... More
S&F MCB single pole, 6 to 32 Amps ‘B’ series, 240 Volts 50 HZ, 10 KA breaking capacity complete all as specified and as directed.
8
-
-
... More
3 For Pumping Machinery Sludge Holding Tank to Sludge Drying Bed and Filtration Tank to Oil and Grease Tank respectively
Supply, installation, commissioning and testing upto entire satisfaction, three phase, 50 Hz, 415V, submersible pump set non clogable type with discharge of pumpset not less than 20 liters/second, head of pump 12 to 24 metres and capacity 2.2KW/3HP including foundation clamping and fixing arrangement sewage pumping arrangement with and including suction butterfly valve – 1No, discharge butterfly valve- 1No, Non return valve-1No, foot valve of required gauge – 1No from Sludge Holding tank to Sludge Drying Bed. complete all as specified and directed.
4
-
-
... More
Supply only Alum (Non ferric alum) Grade IV for settler tank all as specified and as directed.
500
-
-
... More
Note:-Please refer schedule 'A' notes before quoting the tender.
-
-
-
... More
All as per 8.13 above but for fixing/laying only. Note for item No 8.13 & 8.14:- Quantity 110 RM for pipe line arrangement and 3100 RM for recycling of treated water has been considered.
(ii) DI Pipe for fixing/laying will be issued under Sch 'B'.
99
-
-
... More
Supply, erect, test and commissioning of chlorine dosing pump 2 Nos of 70 Iph with motor, starter, electrical connections, piping valves, gauges with HDPE dosing tank 200 Ltr – 01 No including foundation connected items for full functioning and foundation clamping and fixing arrangements complete all as specified and as directed.
1
-
-
... More
Supply and install Air Blower system, with electric motor of 10 HP/8 KW, 3 phase, 440 volts complete installation and testing including electric connection, star delta starter upto the entire satisfaction. Foundation clamping and fixing arrangements including non return valves, pressure gauges, pressure relief valve, energy efficient motar complete all as specified and as directed.
4
-
-
... More
(I) Supply and fixing XLPE power cables insulated copper conductor armoured cable buried under ground/surface/on racks including glanding and terminating at both ends with accessories etc as required for complete all as specified and as directed for the following size of cables:-
-
-
-
... More
VI FOR CLARIFIER WITH TUBE SETTLER
Supply, erect, test and commissioning of electro mechanical equipment of clarifier along with tube settler with PVC tubes of size 0.05m with 40 tubes along the length of square module and 40 tubes along the width of the module and thickness of individual square tube 1.50mm. flow through tube settler 85 cum/hr complete all as specified and as directed.
NOTE: The base support of tube settler shall be as per manufacturer instructions
1
-
-
... More
VIII FOR PRESSURE FILTER ARRANGEMENT
Supply and install, testing and commissioning of multigrid coarse (pebbles and gravel) and Sand Pressure Filter, shell type having operating flow 85.00 Cum/hr, dia of the filter not less than 3.2 Mtr and shell height minimum 1.8 mtr including media. The body of Pressure filter made of Mild Steel with epoxy coating and thickness not less than 8mm thick including filter media and back wash system complete with butter fly valves, non return valves, piping, gauges, supports, including all connected items for complete functioning, foundation clamping and fixing arrangement complete all as specified and as directed.
1
-
-
... More
Lump sum price worked out by the contractor for EXTERNAL ELETRIC SUPPLY WORKS as listed in Schedule ‘A’ Part- V (Ref prepriced schedule attached seperately)
1
575368
-
... More
Fabrication and painting of structural steel of various sizes for equipment foundation/ support/cable rack etc with accessories and hardware as required complete all as specified and as directed.
1
-
-
... More
S&F Ductile iron pressure pipes 200mm bore, class K9, centrifugally cast with spigot and socket ends conforming to IS 8329/2000 with cement mortar lining in side the pipes and out side Zinc coating suitable for push-on-joint including (rubber gasket D jointing) in any length as required at site and all jointing materials including cutting, welding and insertions branch connections etc, complete all as specified and as directed.
5
-
-
... More
Lump sum price worked out by the contractor for EXTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- IV (Ref prepriced schedule attached seperately)
1
34847
-
... More
VII FOR FILTER FEED TANK WITH CHLORINE CONTACT TANK
Supply fix, test and commisioning of direct cylinder mounted type vacuum chlorinator for pressure feed including all gauges, pump, motor, starter, valves, piping, connection to water mains with necessary fittings conforming to IS 10553 part -2 having capacity 1.0 to 1000 gm/hr with Cylinders – 02 Nos with chlorine with two kits of mask and connected items for usage by operators in case of leaks. Construction of soak pit for soacking chlorine cylinder in water in case of leak complete all as specified and as directed.
1
-
-
... More
Lump sum price worked out by the contractor for AREA DRAINAGE WORKS as listed in Schedule ‘A’ Part- VII (Ref prepriced schedule attached seperately)
1
489912
-
... More
IV FOR EQUILATION TANK
Supply, fix, test and commissioning of disc type Course Bubble Air Grid non clogable type min 26 Nos arrangement of capacity 210 cum/hr with bubble type disc diffusers system, piping, disc diffuser 300 mm, valves, gauges complete equipment with UPVC piping and connected items for fully functioning complete all as specified and as directed.
1
-
-
... More
Lump sum price worked out by the contractor for INTERNAL WATER SUPPLY WORKS as listed in Schedule ‘A’ Part- II (Ref prepriced schedule attached seperately)
1
8234
-
... More
Lump sum price worked out by the contractor for SEWAGE DISPOSAL WORKS as listed in Schedule ‘A’ Part-VIII (Ref prepriced schedule attached seperately)
1
2582097
-
... More
All as per 8.15 above but for fixing/laying only. Note for item No 8.15 & 8.16:- Quantity 110 RM for pipe line arrangement and 3100 RM for recycling of treated water has been considered.
(ii) DI Pipe for fixing/laying will be issued under Sch 'B'.
99
-
-
... More
SCH 'A' Pt - XIII (MISCELLANEOUS ITEMS)
-
-
-
... More
INTERNAL ELECTRIFICATION WORKS NOTE:- For items of INTERNAL ELECTRIFICATION WORKS notes given at the beginning of Sch ‘A’ Part-III (INTERNAL ELECTRIFICATION WORKS) shall also be applicable.
-
-
-
... More
S&F Waterproof LED Luminaire Surface/Suspended Mounted waterproof (IP-65) luminaire suitable for single and twin T8 LED lamps 18/19 Watts each complete all as specified and as directed.
10
-
-
... More
All as per 8.11 above but for fixing/laying only. Note :- (i) DI Pipe for fixing/laying will be issued under Sch 'B'.
176
-
-
... More
5. For Filtration Pump & Sludge Treatment Pump, (Backwash) Supply, installation, commissioning and testing upto entire satisfaction, three phase, 50 Hz, 415V, submersible pump set non clogable type with discharge of pumpset not less than 20 liters/second, head of pump 12 to 24 metres and capacity 0.75KW/1.0HP including foundation clamping and fixing arrangement sewage pumping arrangement with and including suction butterfly valve – 1No, discharge butterfly valve- 1No, Non return valve-1No, foot valve of required gauge – 1No complete all as specified and directed.
4
-
-
... More
Supply, erection, testing and commissioning complete of OEM manufactured, assembled and with static silent (sound proof enclosure), diesel engine driven generating set capable of delivering 160 KVA, 6 cylinder, 4 stoke in- line water cooled, 415 volts (AC three phase, 4 wire system of supply) 50 HZ of operation complies with current CPCB IV emission norms at power factor 0.8 minimum. The DG set shall consists of diesel engine coupled to a matching alternator, through flexible coupling and mounted on common base frame and complete with control panel standardized by manufacture, fuel tank with mounting arrangements and inlet outlet return inlet oil arrangement exhaust pipe complete and suitable for conditions prevalent at site including PCC foundation (of suitable size leaving at least 1 Mtr all around for easy of movement and 0.5 Mtr height) anti vibration pads, including all features to complete all as specified and directed.
ENGINE (Prime Mover): Diesel Engine 1500 RPM, direct injection, type four stroke, confirming to ISO 3046/BS 5514, water, cooled, naturally turbo charged, capable of 160 KVA DG set at outdoor atmospheric conditions at O.F Chanda estate area, 12 Volt (as per manufacturer recommendations) electric battery start, complete with SA E3 fly wheel housing and SAE 10 Flywheel, fixed integrated Radiator all standard fittings/fixtures as per manufacturer and including suitable panel with tachometer lubricant oil, temperature, pressure gauge and frequency meters and also including self starter system dynamo, fuel electric control panel with electronic governor (ECPG) and engine protection system (shut down, High water temperature, low lubricant oil, oil pressure over speed etc) fuel tank and first fill of lubricant oil and other consumable etc.
Contd....
1
-
-
... More
Cleaning of blocked sewer lines 300mm dia with mechanical jet cleaning and super sucker (vehicle mounted) from one manhole to another manhole and clear the blocked sewer lines including cleaning the intermediate manholes, taking out the blocked mud and clean the manhole fully and washing with fresh water and burry the black soil under the ground due to unhygienic conditions completely. The unit rate is deemed to include all expenses of approach, clearance and all works required for this job complete all as specified and as directed.
1500
-
-
... More
4 Core 4 sq mm.
50
-
-
... More
SEWAGE DISPOSAL WORKS NOTE:- For items of SEWAGE DISPOSAL WORKS notes given at the beginning of Sch ‘A’ Part-VIII (ISEWAGE DISPOSAL WORKS) shall also be applicable.
-
-
-
... More
(III) PUMPING MACHINERY ARRANGEMENT
1. For Main Pumping Station to Pre-Treatment Unit
Supply, installation, commissioning and testing upto entire satisfaction, three phase, 50 Hz, 415V submersible pump set non clogable type with discharge not less than 60 litres/second, head of pump 12 to 24 meters and capacity 15KW/20HP including electric connection from panel and pump, including foundation clamping and fixing arrangement, frame work for fixing – 01 No for sewage pumping arrangement with and including suction butterfly valve – 1 No, discharge butterfly valve – 1 No, non return valve- 1 No, of required gauge from main pumping station to pre tre treatment unit complete all as specified and as directed
2
-
-
... More
M&L EPDM media for increasing surface area for bacterial growth for 1.70 MLD STP complete all as specified and as directed.
65
-
-
... More
All as per item No 8.17 here-in-before but MS black pipe 80mm dia.
100
-
-
... More
M&L for construction of valve chamber of size 1500mm x 1500mm x 1500mm thick PCC solid wall masonry valve chamber built in CM 1:6 with 150 mm thick PCC foundation 1:4:8, coping 50mm thick finished even and smooth, rendering 10mm thick in cement mortar (1:6), finished fair and even externally including excavation earthwork in any strata, 25 x 25 x5mm angle frame and MS sheet cover 3.15mm thick painting on new steel surface with two coats of black bituminous paint over a coat of red oxide and white washing three coats on newly plastered walls undecorated surfaces including locking arrangements cast iron handle 100mm, butt hinges 100mm complete all as specified and directed by GE.
2
-
-
... More
S&F Extruded Aluminium batten 4ft run length with multiple lumen packages indoor commercial 1X20W LED fitting and suitable for Surface, Wall mounting (with accessories) complete all as specified and as directed.
25
-
-
... More
Supply only Chemicals for chlorination liquid 12% sodium Hypochloride (NaClO) liquid bleach solution for filter feed tank all as specified and as directed.
600
-
-
... More
X FOR SLUDGE HOLDING TANK
M&L for all inlet, outlet pipes, valves, non return valves/vents/manifolds/ laterals/dish, air release valves and gauges etc, back wash facility and all connected items for full functioning including outdoor usage protective paint, foundation testing and commissioning complete all as specified and as directed.
1
-
-
... More
Lump sum price worked out by the contractor for RECYCLING OF TREATED WATER WORKS as listed in Schedule ‘A’ Part-XI (Ref prepriced schedule attached seperately)
1
2788725
-
... More
Supply and fixing BEE 5 star rated ceiling fans 230V, 1200mm sweep with ISI marked, with brushless direct current motor (BLDC), air delivery 210 M3/min and service value 6.00 including down rod upto 1 meter ,complete connecting with 1.5 sqmm copper three core cable from ceiling rose all as specified and directed.
2
-
-
... More
(ii) ALTERNATOR: Brushless AC alternator, 3 phase, 415 volt, 4wire, confirming to BS 5000/IS 4722 rated for output of 160 KVA DG Set. Minimum power factor 0.8 1500 RPM, IP 23 protection class enclosure, insulation class "H" silent pole, revolving field single bearing automatic voltage regulator coupled through flexibl+E22e coupling with and to match the above engine. Make Stamfort/Crompton/MEC/LS.
Note: Alternator Capacity calculated as per ambient temperature 50 degree centigrade of OF Chanda. (iii) BASE PLATE: Made out of structural steel as per manufactures recommended design/ specifications. (iv) IN BUILT AMF CONTROL PANEL: Factory made cubical type Inbuilt AMF panel board, indoor type made out of MS angle not lees than 25x25x5 mm and 2 mm thick MS CRCA sheet, front opening type, protection class IP-54, duly powder coated after seven tank process, with electrolytic grade copper bus bar of 400 Amps capacity for four poles, with all standard switchgear and protection, internal wiring of adequate size PVC insulated multistranded copper conductor cable etc and also consisting of following:-
(a) MCCB 320 Amp, 415 Volts, rating 4 pole 25 KA, rupturing capacity. specially fixed for incoming supply with over load relay, short circuit and earth fault protection 01 Nos with suitable rating HRC back up fuses.
Contd...
-
-
-
... More
Supply and fix Cast iron Double Flanged Non Rising spindle type sluice Valve having S.S 410, Spindle & Gun Metal working parts, manually Spur Gear operated, confirming to IS : 14846/ 2000 (PD) PN-1.6 with ISI complete of size 300mm dia including Gland packing, greasy jute packing, Fasteners, Natural Runner Gasket etc complete all as specified and as directed.
2
-
-
... More
S&F Exhaust fan 300 mm sweep, heavy duty, 900 rpm, 230 volts complete, including electric connection with 3 core copper sheathed cable of 1.5 sq mm from the ceiling rose to exhaust fan complete including louvers to exhaust fan with ISI marked complete all as specified and as directed.
2
-
-
... More
(b) AMF logical panel including wiring, power contractor with MCCB suitable capacity for DG Set of main supply, single phase preventer, digital multifunction meter (showing Amps, Volts, Hz KWH etc), Emergency stop Button, DG Set over load, High water temp, Low lube oil pressure, Auto charging unit and failure to start, Phase indication lamp LED type RYB including all relays, circuit and protection required of automatic operation of DG Set. (v) ACCOUSTIC ENCLOSURE: Sheet metal fabricated cope type silent enclosure manufactured on CNC machines as per CPCB norms and powder coated after seven tank process, the enclosure shall be designed for reducing the sound level to 75 DB (A) at a distance of 1M at 75% load under field condition and OX,70 DB at 3M from Gen-set when DG Set is working at full load alongwith testing conformance, labeling certification etc as laid down in GSR No 371 (E) dt 17 May 2002. Contd...
-
-
-
... More
Supply, fabricate, erect/laying of MS black pipe as per IS, ISI marked including welding, flanges, nuts and bolts jointing material and providing supports, duly painted with one coat of primer and two coats of enamel paint above ground and black bituminous (douber) paint over primer below ground level for 200 m dia MS pipe complete all as specified and as directed.
5
-
-
... More
EXTERNAL WATER SUPPLY WORKS NOTE:- For items of EXTERNAL WATER SUPPLY WORKS notes given at the beginning of Sch ‘A’ Part-IV (EXTERNAL WATER SUPPLY WORKS) shall also be applicable.
-
-
-
... More
7 Core 2.5 sq mm.
500
-
-
... More
3 Core 4 Sq mm.
160
-
-
... More
IX FOR ACTIVATED CARBON FILTER
Supply and install Carbon Filter, shell type having operating flow rate 85.00 Cum/hr, dia of the filter not less than 3.50 Mtr and shell height minimum 1.8 mtr. The body of Pressure filter made of Mild Steel with epoxy coating and thickness not less than 8mm thick including filter media and back wash system complete with butter fly valves, non return valves, piping, gauges, supports, including all connected items for complete functioning, foundation clamping and fixing arrangements, the filter shall be as per OEM specification and description with minimum of 5mm thickness including media, all inlet, outlet pipes, valves, non return valves/vents/manifolds/laterals/dish, air release valves and gauges etc, back wash facility and all connected items for full functioning including outdoor usage protective paint, foundation testing and commissioning complete all as specified and as directed.
1
-
-
... More
S&F fire Extinguisher of 6 KG, Type ‘ABC’ with mounting bracket/ hardwares complete all as specified and as directed.
2
-
-
... More
(II) PIPE LINE ARRANGEMENT
Fixing only with new tyton joints Ductile iron pressure pipes 300mm bore, class K9, centrifugally cast with spigot and socket ends conforming to IS 8329/2000 with cement mortar lining in side the pipes and out side Zinc coating suitable for push-on-joint including (rubber gasket D jointing) in any length as required at site and all jointing materials including cutting, welding and insertions branch connections etc, complete all as specified and as directed. Note:(i) Quantity 33 RM for pipe line arrangement and 200 RM for recycling of treated water has been considered. (ii) DI Pipe for fixing/laying will be issued under Sch 'B'.
233
-
-
... More
Supply and fix 36W LED new generation energy saving & environmental friendly long life versatile pressure die cast aluminium IP66 roadway luminaire with high power LEDs as light source and electronic driver, on steel tubular poles including and side entry mounting for 36 to 40 mm OD GI pipe bracket in luminaire of 2 Nos ‘U’ clamp and are provided for direct mounting on pole, complete all as specified and as directed.
8
-
-
... More
Supply & fixing CI specials any type for spigot socketed pipe of any size and any type such as Tees, bends, collars, Reducers, tappers, blank plate, MJ adapters etc suitable from 100 mm to 300 mm dia pipes including joint and jointing materials complete all as specified and as directed.
100
-
-
... More
Lump sum price worked out by the contractor for EXCAVATION, EARTH WORK AND SITE DEVELOPMENT WORKS as listed in Schedule ‘A’ Part-XII (Ref prepriced schedule attached seperately)
1
1933695
-
... More
Lump sum price worked out by the contractor for COMPOUND WALL , FENCING AND GATE WORKS as listed in Schedule ‘A’ Part-IX (Ref prepriced schedule attached seperately)
1
1184122
-
... More
RECYCLING OF TREATED WATER WORKS NOTE:- For items of RECYCLING OF TREATED WATER notes given at the beginning of Sch ‘A’ Part-XI (RECYCLING OF TREATED WATER WORKS) shall also be applicable.
-
-
-
... More
3 Core 2.5 Sq mm.
450
-
-
... More
V FOR MBBR-1 AND 2
Supply, fix, test and commissioning of fine bubble diffuser non clogable type min 56 Nos arrangement of capacity 400 cum/hr with bubble type disc diffusers system, piping, disc diffuser 300 mm, valves, gauges complete equipment with UPVC piping and connected items for fully functioning complete all as specified and as directed.
Note: Blower and motor not included but piping up to blower included.
1
-
-
... More
S&F MCB SPN 32 Amps ‘B’ series 240 Volts, 50 Hz, 10 KA breaking capacity complete all as specified and as directed.
2
-
-
... More
Lump sum price worked out by the contractor for STP E/M PORTION WORKS as listed in Schedule ‘A’ Part-X (Ref prepriced schedule attached seperately)
1
458374
-
... More
S&F Ductile iron pressure pipes 100mm bore, class K9, centrifugally cast with spigot and socket ends conforming to IS 8329/2000 with cement mortar lining in side the pipes and out side Zinc coating suitable for push-on-joint including (rubber gasket D jointing) in any length as required at site and all jointing materials including cutting, welding and insertions branch connections etc, complete all as specified and as directed.
891
-
-
... More
Supply and install agitator for agitating sewage with top mounted electric motor of capacity 45KW/60HP out door type, three phase including mounting arrangement, coupling arrangement to motor with shaft and impeller. Material of shaft and impeller shall be carbon steel/rust and acid resistant steel shaft (Gearing if and as required) complete all as specified and as directed.
Note :- Agitator to be provided for Pre-anoxic tank.
2
-
-
... More
S&F Ductile iron pressure pipes 150mm bore, class K9, centrifugally cast with spigot and socket ends conforming to IS 8329/2000 with cement mortar lining in side the pipes and out side Zinc coating suitable for push-on-joint including (rubber gasket D jointing) in any length as required at site and all jointing materials including cutting, welding and insertions branch connections etc, complete all as specified and as directed.
3111
-
-
... More
All as per item No 8.17 above, but size of MS pipe 150 mm dia.
15
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements