Military Engineer Services Tender

S&F Road side Delineator having two high performance rectangular reflectors of 105 mm x 85mm fixed on both sides of guide post made of ABS plastic/PMMA materials and fixed on powder coated rectangular steel pipe of 600mm height and 75 mm x 25 mm size including necessary earth work in any type of soil, or demolition of PCC work in ground floor and removal of excavated material/soil/debris out side of MoD land at any distance and providing PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in PCC bed block of size 300x300x300mm including necessary form work etc, complete all as specified and directed Make: Cat Part DA-77 ABS of Dark eye or equivalent of Greenlite / Oscar / Siner Infrastructure/Road Star

S&F Road side Solar Delineator of size 1000x47mm made of polycarbonate and toughened aluminium alloy body (height 145mm x 80mm dia ) comprises of 4 super bright LEDS of self illuminating, flashing type which gives 360 degree viewing with solar panel 2.5V, 120mm (approx ) and detachable Ni-MH batterly of 1.25V rechargeable battery to give back-up self and fixed on powder coated steel pipe of 1000mm height of appropriate size as per make/Manufacture instructions including necessary earth work in any type of soil, or demolition of PCC in ground and removal of all waste/excated material out side of MoD land at any distance and providing PCC base block of size 300x300x300mm type C-2 (using 40 mm graded stone aggregate) includig necessary form work etc complete all as specified and directed Make: Darkeye or in equivalent or Oscar/Siner Infrastructure/Green lite/Road Star etc..

S&F Rumble strip made of aluminium body die casted dynamically designed for very high impact strength fitted with two nos highly reflective reflectors on both side fixed on road with the help of epoxy hardener and nails for controlling the speed of vehicles complete all as specified and as directed . Make Model/Cat Part No. DA - 1007 of Dark Eye or equivallent of Siner infrastructure/Oscar/Green lite etc.

S&F road side reflectors of size 144.5 mm dia of ABS body high performance fixed to road side on wall, kerb stone, crash barrier etc designed to give maximum reflection for enhancing the visibility of vehicles with high quality of ABS (Astronitrilite Butadiene Styrene) materials fixed with adhesive and nails/screw as directed by manufacturer. Make Dark Eye Cat Part No. DA-956 or equivallent of Green lite/Oscar/Siner Infrasture etc.

S&F Road ABS Plastic Speed Breaker of size 350 x 50 x 250 mm made of ABS(Astronitrilite Butadiene Styrene) materials with two Nos highly reflectors both side moulded in PMMA materials should welded with ABS Plate through ultrasonic welding process and then fixed on speed breaker to prevent dust & water to inside reflector. The speed breaker should built with rubber as well as ABS plastic material of high quality to capable of with standing load of fully loaded carriers on the road upto 10 Tons (Appx) and fixed to road as per direction of manufacturer directions. Make : Cat pot No. DA-1005 of Dark Eye or equivallent of Green Lite/Road Star/Siner Infrastructur/Oscar etc. complete all as directed.

S&F Convex mirror 1000 mm in dia out door purpose and define mirror images having 130 degree of viewing angle including stand/pedestal of MS pipe duly powdered quoted embedded in PCC 1:2:4 type B1 (using 20 mm grade crushed stone aggregate) foundation of size 450x450x600 mm including necessary earth work and removal of surplus soil, complete all as specified and directed. Make :- Dark eye / Siner Infrastructure/ Road star/ Oscar or equivalent .

S&F Road Stud/ cat eye of size110mm x 120mm x 23.5 mm made out from aluminium alloy die casted dynamically designed very high impact strength and fitted with 02 Nos highly reflective reflectors & 02 Nos eye balls each on both side, complete all as specified and fixed on road with screw/nail and necessary epoxy adhessive as per manufacturer direction directed. Model : No- DA 971 of Make-Dark Eye or equivalent in Greenlite/Road star / Gogia plastics/Oscar/Siner Infrastructure etc.

S&F Solar powered road studs of size 125x125x25mm of 3 Nos LED each side and total 6 Nos LED lights of different colours with Stem of self illuminating, flashing type having 3Nos LEDS for BI-directional studs (flashing and not flickering), visibility minimum 1000 meters flashing rates 65-75 times per min, with detachable Ni-Cd rechargeable batterly of 1.2V to give back-up of atleast 12 hours of continues lights at night from fully charged condition and it should be attached just before fixing and should not be accessible once installed, made of robust alumunium die cast housing with embossed edges for protection against bullock cart iron wheels, having reflector strip in addition to LEDs, stud capable of withstanding load of fully loaded carriers on the road upto Ten tons (approx), having projected top of maximum 20mm above surface, tapering bottom anchor of maximum 55mm length (including bottom cap) with atleast 6 Nos external anti-twist ribs projecting out from bottom anchor, waterproof IP65 as per IS 12063-1987 Category -2, tested to perform satisfactorily for minimum 100 hrs. under rapid thermal cycling tests as per IEC 1215 between -40 to +85 degree centigrade and 700 grms min weight including fixing on road with epoxy adhessive, nail/screw as per manufacturer direction , complete all as specified and directed . Make : Cat Part No DA-110 of Dark eye or equivalent in Oscar /Greenlite / Siner Infrastructure/Road star etc.

S&F Safety bollards consisting of one plastic square plate one MS round plate and one message plate mounted on 1825 mm long (High) and 63 mm dia MS pipe duly powder coated. Plastic plate of size 405 mm x 405 mm is fitted with nine reflectors made of PMMA of 100 mm dia welded ultrasonically on plastic plate. MS round plate having 405 mm should be fitted below the square plate on the prepainted MS pipe with the clamps. High grade reflective tap in blue colour to be pasted on the round plate with direction arrow in white colour. A square MS prepainted plate of size 805 x 75 mm to be fitted below the round plate for message. vertical post to be fixed in ground including necessary excavation in post hole in any type of soil, form work if any required and embedded pipe in PCC 1:3 6 type C-2 (using 40mm graded coarse aggregates) of Size 300 mm x 300 mm x 600 mm deep complete all as specified. Make : Cat Pot No. DA-952 (SB) of Dark Eye or equivalent of Siner Infrastructure /Oscar/ Green lite/Road Star complete all as specified..

S& F information Sign board (both Side written) of size size 4' x 3' (1200 mm x 900 mm) made of 3mm thick ACP sheet framed with 25mm dia stainless steel pipe horizonal in top and bottom adjoining with vertical post and having front side entire surface fully bonded with non reflective sheeting grade having pressure sensetive adhesive . The matter should not be printed on non reflective tape duly laminated so that printing should not fade and two Nos vertical post of 50mm dia stainless steel pipe 3Mtr long with ornamental top quoted as per sample including writting the matterial/words digitally on both side as required and as directed including excavation in post holes and embedded in PCC (1:3:6), type C-2 (using 40mm graded coarse stone aggregates) of size 300mm x 300 mm x 600mm deep and/including removal of surplus soil out side of MoD land as directed, complete all as directed . Note:- The sample of sign board shall be provided by EIC & The contractor shall quote their rate accordingly.