Military Engineer Services Tender

Removing excavated material n.exc 50 m and depositing where directed at a level n exc 1.5m above the starting point all as spd and directed.

M & L moorum filling in floors or paving laid in layers n.exc. 15cm thick spread levelled and rammed including watering complete all as specified and directed

M & L hard core of gauge etc. 63 mm but n. exc. 100 mm deposited spread and levelled in layers n. exc. 15cm thick water and rammed etc. Complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6, complete all as specified and as directed.

M&L for 100mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base/ floor.

M&L for 25mm thick PCC 1:2:4, type B2 (using 40mm graded stone aggregate) as in floor etc, laid in alternate panel, finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for 75mm thick PCC1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection etc finished the surface even and smooth without using extra cement including provision of joint of size 10mm wide & 10mm dep and filling with bitumen mastic joint filling at every 3m length and at corners complete all as specified and as directed.

Steel work in tubular as in frame work including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade all as specified and directed by Engr-in - Charge.

S&F Rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. GDE Fe410-W or Gde-E-250) Quality A .

S&F pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

M&L full body Vitrified coloured Ceramic tiles of light/dark shade 8 to 9mm thick of size 600mm x 600mm as in flooring tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 20 mm thick screed bed in cement mortar 1:6, complete all as specified and directed.

Designing, providing, installing and fixing factory fin ished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel , trusses, purlins etc manufactured out of minimum 0. 75 mm thick steel sheet as per design requirements . The Steel sheet shall be galvanized (AZ-150 gms Aluminum Zinc Alloy coated steel having minimum yield strength 300-550 Mpa) conforming to AISI specifications and IBC 2009 for cold formed steel framing and construction and also as per 18:875-1987, ISO 800-1984 and 18 :801-1975. The wind load shall be as per provisions of IS 875(part-lll). LGSFS frame shall be designed as per IS: 801 using commercially available software such as Frame CAD Pro-11 .7/STAAD PROV8i/ ArchitekV2 .5.16/Revit architecture-2011 or equivalent. Proper usage of Connection Accessories like Heavy Duty Tension Ties, Light Duty Hold-ons, Twist Straps (to connect truss with wall frames) , Strong Tie, Tie Rod, H-Brackets, Boxing Sections, L -Shaped Angles for better structural stability. The framing section shall be cold form C-type having minimum web depth 89 mm x 39mm flange x 11 mm lip in required length as per structural design requirement duly punched with dimple/slot at required locations as per approved drawings. (Contd/--)

(Item No 16 Contd/--) The slots will be along center line of webs and shall be spaced minimum 250 mm away from both ends of the member. The frame can be supplied in panelized or knock down condition in specific dimensions and fastened with screws extending through the steel beyond by minimum of three exposed threads. All self-drilling tapping screws for joining the members shall have a Type II coating in accordance with ASTM 8633(13) or equivalent corrosion protection of gauge 10 & 12, TPI 16 and 8 of length 20mm. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self-expanding carbon steel anchor bolt of dia as per approved drawings and design subject to minimum 12 mm diameter and 121 mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 1 OOmm in RCC (RCC to be paid separately) and located not more than 300mm from corners or termination of bottom tracks complete in all respects. The item also includes the submission of stability reports duly examined and issued by any NIIT/lIT. The rate includes the concept design, detailed design, fabrication of sections, transportation, installation and all required fixing arrangement at site as described above.

Fill the groove (i.e. 2-3 mm gap between boards}, taping and Jointing 8mm thick fiber cement board and 12.5 mm thick gypsum plaster boards with epoxy based sealing compound, acrylic based sealing compound, non woven reinforcement tape as per direction of Engineer in Charge. (Use a flexible knife so that no air bubble is entrapped. Allow 1-2 hours gap. Once hard tacky or set, apply a coat of acrylic based sealing compound paste to flash fill the beveled area. After 2-4 hours go on to repeat a skin coat with acrylic based sealing compound to securely embed the 40mm width non woven reinforcement tape. Use only flexible steel knife, such as provided with packs, to avoid air entrapment within compound. After overnight drying shrinkage apply a coat of acrylic based sealing compound to compensate shrinkage. Finally cover the bevel portion with any suitable overall skin coat with a desired full surface-leveler material.

Providing and fixing external wall system on Light gauge steel frame work with 9mm thick heavy duty fiber cement board confirming to IS 14862:2000, type A (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners@ 60cm c/c of approved make. A grove of 2 mm to 3mm shall be maintained and groves shall be sealed with silicon-based sealant. The board shall be fixed in a staggered pattern.

Providing and fixing of external wall system on Light gauge steel frame work internal face 8mm thick fiber cement board confirming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing

Providing and fixing of external wall system on Light gauge steel frame work with internal face 12.5mm thick gypsum plaster board fixed on internal fiber cement board confirming to IS 14862:2000 of category III type B (High pressure steam cured) as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish.

M&L for breathable vapour barrier underneath the cement fiber board as per National Building Code2009

Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3, 50 mm thick fixed to wall.

Providing and fixing external wall system on Light gauge steel frame work on heavy duty fiber cement board, external thermal insulation and composite system with 1st layer: 25mm thick expanded polystyrene (EPS) fixed on fibre cement board using polymer based adhesive, 2nd layer: 145 GSM fibre glass mesh, 3rd layer: 3 to 4mm thick layer of polymer based render coat

M&L for 60mm thick, factory made, chamfered edge, cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, lawns, drive ways or light traffic, parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand; etc complete all as specified and as directed.

M&L preparation of surface and applying applying two or more coats of premium acrylic smooth, Exterior paint with Silicone additives of required shade @ 1.43 ltr/10 sqm over priming coat of exterior primer @ 2.20 kg/10 sqm all as specified and as directed.

M&L Finishing internal walls with Acrylic Emulsion Plastic Paint of required shade: New Work (Two or more coats applied @ 1.43 ltr/ 10 sqm.)

M&L for PCC 1:3:6 Type-C2 using 40 mm graded stone aggegates as in surface chanel, benching in manhole including necessary formwork complete all as specified and as directed

M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick masonary surfaces or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:4 on other then fair faces of brick masonary surfaces or concrete surfaces, finished even and fair without using extra cement complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 (40mm graded stone agg) as in foundation filling and mass concrete etc complete.

M&L for use and waste of form work for column footing and sides of plinth beam, bands, cantilevers, bressumers, lintel over 1.5 m span all as specified and directed..

M&L for reinforced cement concrete, type B-1, 1:2:4, using 20 mm graded stone aggregates as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M&L for mild steel TMT bars 6 to 8 mm dia, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally, hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

Supply and fixing laminated Gypsum tile Board 8mm thick with textured white colour PVC film on the face side and metalized polyster (MPL) film on rear side in ceiling as per manufacturers instructions of size 595x595 mm in true horizontal level, suspended on interlocking metal grid of hot dipped galvanized steel sections ( galvanized @ 120grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge

S&F powder coated aluminium Sliding door with frame and shutter in panels made out of aluminium sections (make Jindal or equivalent) including 12 mm thick Toughned glass sheet, roller, sliding channel, aluminium cleats, rubber/ neoprene beading, door handle and all necessary fittings and locking arrangements etcall as specified and as directed and comprises of following sections :- (a) Vertical style &Top Rail- 47.5 x 44.5 x 2.25 mm thick @ 1.15 Kg/m (Min) (b) Lock rail- 114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (c) Bottom rail-114.6 x 44.45 x 2.3mm thick @ 2.06 Kg/m (Min) (d) Frame-47.5 x 44.45 x 2.25 mm thick @ 1.12 Kg/m (Min)

S&F powder coated aluminum windows , three track with outer Aluminium grill, made out of aluminium sections (make Jindal or equivalent) including all necessary fittings, 5mm thick sheet glass, rubber/ neoprene beading, locking arrangements all as specified and as directed and comprises of following sections :- (a) Window frame (i) Bottom-Section 20671 (Wt not less than 0.699 Kg/m) (ii) Top & Size - 20672 (Wt not less than 0.594 Kg/m) (b) Shutter (i) Vertical (end)- 20669 (Wt not less than 0.481 Kg/m) (ii) Vertical (lock) - 20689 (Wt not less than 0.481 Kg/m) (iii) Bottom - 20718 (Wt not less than 0.263 Kg/m) (iv) Top - 20668 (Wt not less than 0.377 Kg/m)

S&F Toughned glass12mm thick as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge.

M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc as specified and directed for one light point or one fan point controlled by one, one way switch . NOTE :- 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black)2. All points shall be earthed up to fixtures i.eceiling lights,bldg security lights etc. 3.Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall ,floors etc.

All as per ser item No. 40 herein before but One 5 Amp 5 pin socket outlet point on same board with other switches including earth wire as specified.

All as per ser item No. 40 herein before but with 2.5 Sqmm PVC copper stranded cable FRLS type for phase,Neutral and earth for one 15 Amp 3 pin socket on independent board.

All as per ser item No. 40 here in before but on independent board.

S&F modular switch one way, 6 Amp, one module, 230V all as specified and directed.

S&F modular socket, 6A, 2-3 pin combined 2 module, 230V all as specified and directed.

S&F modular switch one way, 16 Amp, one module, 230V all as specified and directed.

S&F modular socket, 6A/16A, 2-3 pin combined 2 module, 230V all as specified and directed.

S&F modular fan Regulator, 120 watt , 2 module complete all as specifed and as directed.

S&F modular cover plate frame, 2 module complete all as specifed and as directed.

S&F modular cover plate frame, 3 module complete all as specifed and as directed.

S&F modular cover plate frame, 8 module complete all as specifed and as directed.

S&F 600 mm x 600 mm size, recess mounted LED luminaire of capacity 36 watt,3000K with driver, for warm free light, AC 230 volt complete with all acessories and connections to light fittings, complete all as specified & as directed.

M & L for submain wirng with two single core PVC insulated unsheathed, multistranded flexible FRLS copper conductor 1100Volts grade cables 4 Sqmm drawn through in and including PVC heavy duty surface casing caping including 4 Sqmm 1100Volts grade PVC insulated unsheathed multi stranded flexible FRLS copper conductor cable as continuous earth wire and connecting to common earth terminals complete all as specified & directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase- RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2.Two run of 4 sq.mm for one run for phase,one run for neutral with one run of 4 sqmm cable for earth.

Supply and fix MCB SP, AC 240 V,6 to 32 Amps 10 KA capacity ,'c' series making connection with suitabl size of copper lugs etc complete all as specified and directed by engineer-in-charge.

Supply and fix MCB SPN, AC 240 V,40 to 63 Amps 10 KA capacity ,'c' series making connection with suitabl size of copper lugs etc complete all as specified and directed by engineer-in-charge.

Supply and fix sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 4 way protection class IP-42,suitabl for fixing MCBs,Isolators etc,suitable for flush mounting and surface mounting,with 200 Amps rated copper busbar,with Neutral bar,Earthbar and cable alley for cable managment,fully shrouded, Neutral bars,prefittes masking sheet complete all as specified and as directed.

Supply and fix security light of building with single piece New generation energy savng and environmental friendly long life LED 35W made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of Light grade GI Pipe 25 mm dia 1.5 mtr long fixed to wall/ pole with two clams made out of MSFI 4 0 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminim cable all as directed and as specified.

M & L for Earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level connecting to the GI wire 4 mm dia , by means nut bolt, nuts, check nuts and washer of the GI .Earth wire connected upto main earth point/DBs alongwith 15mm dia incl provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregated with 40 mm thick cover with RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg / Sqm) and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, taste point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified incl testing on completion”.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with Five star rated with brushless direct current motor (BLDC).

Supply and fix sheet metal enclosures with plug socket single pole and neutral with two pin and earth plug and with one MCB of 20 Amps (SP) complete all as specified.

Supply and fix sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 8 way protection class IP-42,suitabl for fixing MCBs,Isolators etc,suitable for flush mounting and surface mounting,with 200 Amps rated copper busbar,with Neutral bar,Earthbar and cable alley for cable managment,fully shrouded,Neutral bars,prefittes masking sheet complete all as specified and as directed.

S & F Compact Cable Manager/destop interface including two universal power, one USB Charger,2x RJ45 Network,one no VGA,one no HDMI 2.0 PORT suitable for flush mounting on floor with wooden fitting with all arrangements complete all as specified and directed by Engr-in-Charge.

Supply & laying DWC Cable duct pipe of size 50 mm bore confirming to IS :16205 Part 24 for laying of LT cables etc complete with all accessories all as specified and directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable of size 25 sqmm, 3.5 core with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall sheathed including cable gland, lugs, jointing material etc and jointing, connecting, testing and commissioning complete all as specified and as directed.

Supply and laying in trenches or fixing or passing through pipe, 1100 Volts grade heavy duty LT UG cable of size 10 sqmm, 4 core with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape, armoured with galvanised steel wire or tape and overall sheathed including cable gland, lugs, jointing material etc and jointing, connecting, testing and commissioning complete all as specified and as directed.

Supply install and testing out door wheather proof bus bar chamber of size 80 cm x 30cm x 25cm made out of 18 SWG MS sheet having one side openable hinged door shuter with looking arangement/provn of two nos 80cm long 40x40x6mm anlge iron legs welded and 04 nos copper bus bar of 200 Amp rating provn of one MCCB TPN 63 Amp 16 KA for controlling Electric supply complete erracted on ground with necessary PCC 1:3:6 type C2 foundation complete bus bar chamber painted with two coats of approved enamel paints over one coat of primer including making cable connection with necessary gland , lugs/thimbles all as specified.

M&L earthing complete as per electrical plate No. 3 of MES SSR Part-I with galvanised steel earth plate electrode 60cmx60cmx6.0mm thick, buried directly vertically in ground in a pit depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less then 1.5 metre below normal ground level connected to and including galvanised iron or steel earth strip 25mm x 4mm by means of bolts, nuts check nuts and washers of galvanised iron or steel. Earthing strip shall be protected by galvanised iron or steel pipe 32mm bore light grade and connected to continuous earth wire on pole / test point. Watering pipe shall be 20 mm bore GI medium grade. The earthing shall be of inclusive of excavation & earth work in any type of soil, charcoal, salt, funnel PCC pit and RCC cover complete all as specified & tested complete.

Supply and install inveter type split AC of capacity 1.5 ton of units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with 5 star rating,230 V, 50 HZ all as specified and directed by Engr-in- Charge.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 2.0 KVA all as specified and directed by Engr-in- Charge.