Military Engineer Services Tender

Supply, installing, commissioning and testing centrifugal pump set electronic driven discharge capacity 55 LPS at 59 mtr head , Mechanical Seal, closed Impeller, horizontal Split casing, pump efficiency 72.38%, NFLP IE2(Foot Mounted), IP- 55, CI Delively casing, CI Impeller, Shaft 40 C8, CI shaft sleeve coupled to suitable capacity three phase squirrel cage induction motor 415 volts, 50 hz, 1450 RPM (not less than 60 HP motor) complete set mounted on common steel base frame, and including pressure gauge of suitable range on suction and delivery including all electrical connection with suitable size PVC insulated unsheathed 1100 volts grade LT stranded copper conductor cable passing through and including metal flexible conduit of suitable size from LT panel board to pump motor, incl PCC foundation 1:3:6 type CI as per manufacture's design complete all as specified and as directed by Engineer-In -Charge. Model No: DSM 125/40 Make - Kirloskar Note: For SI item no 1 to 4, rated quoted are deemed to be included with material & labour required for a) taking down old unserviceable sludge pump from existing position and depositing the same at MES yard, b) addition alteration at existing pump foundation, for making suction & discharge pump connection, suitable MS pipe of suitable length required to meet suction & delivery end/fitting for inlet outlet connection, suitable flanges, rubber gaskets, SS304 nut bolts etc along with structural steel and PCC/RCC work required at site

Supply, installing, commissioning and testing centrifugal pump set electronic driven discharge capacity 34 LPS at 59 mtr head Mechanical Seal, closed Impeller, horizontal Split casing, pump efficiency 70.28%, NFLP IE2(Foot Mounted), IP- 55, CI Delively casing, CI Impeller, Shaft 40 C8, CI shaft sleevecoupled to suitable capacity three phase squirrel cage induction motor 415 volts, 50 hz, 1450 RPM (not less than 50 HP motor) complete set mounted on common steel base frame and including pressure gauge of suitable range on suction and delivery including all electrical connection with suitable size PVC insulated unsheathed 1100 volts grade LT stranded copper conductor cable passing through and including metal flexible conduit of suitable size from LT panel board to pump motor, incl PCC foundation 1:3:6 type CI as per manufacture's design complete all as specified and as directed by Engineer-In -Charge. Model No: DSM 100/36 Make - Kirloskar

Supply, install, testing & commissioning vertical type centrifugal pump with discharge of 46.4 Ltr/sec, Head 20.00 Mtr, Power 15 KW, pump efficiency 66.3%, S TUBE Cast Iron EN-GJL250 impeller & Cast Iron EN-GJL250 Housing suitable for Sewage water along with driving motor of 15 KW, 415 V, 50 Hz, RPM 2947, insulation alass (IEC 85):H, Enclosure class (IEC 34-5): IP68, Rated current 28-30 A with dry run unit protection & all required accessories Model No: SE1.75.100.150.2.52S.N.51D.A of Make: Groundfos or equivalent in Keum Jung Industrial/ Yeomans chicago corporation. Complete all as specified and as directed by Engineer-In-Charge. Note: (i) Pumpset should have suction clearance adjustment to regain factory set efficiency without any replacement or opening of pumpset. (ii) Mechanical seal should be cartridge type only. (iii) Accessories to install pumpset in dry well horizontally along with control panel from OEM only. Rate quoted are deemed to be included with it.