Military Engineer Services Tender

(c ) One 3 pin socket outlet, 5/6 Amps, independent

(d) M&L point wiring One 3 pin socket outlet with 4 sq mm copper conductor FRLSH (multistrand) PVC insulated ISI marked unseathed cable in and including PVC conduit not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 4 sq mm copper conductor as earth wire to common earth dolly complete all as specified and directed

(e) One bell/ buzzer point controlled by one push button on independent board with cables 1.5 sq.mm size

S&F modular switch 1 way 10 A 1 module. complete all as specified and directed

S&F Modular socket 6 A 2/3 Pin 2 module complete all as specified and directed

S&F modular switch 1 way 16 A 1 module complete all as specified and directed

S&F Modular socket 6 A/16A 2/3 Pin 2 module complete all as specified and directed

S&F modular fan regulator, 2 module, suitable for ceiling fan of 1200/1400mm sweep complete all as specified and directed

M&L in replacement of bell push flush type 5Amps single pole complete all as specified and directed

S&F electric bell Ding Dong type AC, 230 volts single phase complete all as specified and directed

S&F in replacement for ceiling rose, 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed

Taking down and refixing the exiting LAN/CAN/Telephone cables with suitable size cable tray complete for and making good disturbed surfaces of walls, floors, etccomplete all as specified and directed . Note: Cable Tray will be measured and paid under respective Sch A item in the schedule

Supply, Installation, Testing & Commissioning of Wire Mesh galvanized cable trays with a 50 mm x 200 mm mesh configuration along with all necessary accessories. Wire Mesh Cable Tray galvanized after manufacture in accordanceTrays should comply Standard EN ISO 14 61: at least 550 h of SST. The electrical resistance of the joints must not exceed 50 mΩ and must be tested in accordance with the procedure described in the standard IEC 61537. Assemblies with specific fire-resistant properties must have an E30-E90 certificate issued by an approved laboratory in accordance with the tests described in the standard DIN 4102-12. The wire cable tray short-circuit resistance must be tested by an independent laboratory. For the purpose of assembling the various wire cable tray, only fast coupling systems or screw-based (CE25/CE30) systems must be used. These must be designed, mechanically tested and supplied by the wire cable tray manufacturer.The electrical resistance of the joints must not exceed 50 mΩ and must be tested in accordance with the procedure described in the standard IEC 61537.Rod dia must be from 3.9mm to 5.9mm for different sizes. The loading capacities of the brackets and the hanger torques must be tested in accordance with the standard IEC 61537. The tray along with the accessories should not contain any metallic burrs to avoid damaging of cable insulation complete all as specified and directed Make. Legrand CF54/200GC CABLE TRAY GC,CONSOLE CSN 200 GC,KITASSTRDC COUPLING KIT, or equivalent make

S&F Decorative wall mounting fitting with different finishes with borosil glass frosted & soda glass with 7.5 W A60 LED Lamp with E27 base. all as specified and directed Make: Havells- LHFHBDDBTB1M007 or equivalent make as mentioned in list of makes in PS

S&F in replacement of 18/20watt,230V surface and wall mounted LED batten, extruded aluminium housing with polycarbonate diffuser and integrated electronic driver including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified. Make- Luker LT520P 3 in 1 / Havells / Wipro / Halonix/Benlo

S&F in replacement of 12 watt,230V surface and wall mounted white LED Mirror Light including connecting up with twin core twisted flexible copper condctor cable from ceiling rose all as specified and directed . Make- Luker LIMR13 3-IN-1 / or equivalent make as mentioned in list of makes in PS

S&F in replacement LED building security Sensor light fiitting 24 W, IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having seperate driver compartment complete fixing with GI bracket made out of suitable GI pipe light grade suitable length bend to shape and fixed to pole/wall with necessary MS clamp accessories complete all as specified and directed Make- Luker LST-24SEN or equivalent make as mentioned in list of makes in PS

Dismantling and refixing the ceiling fan/Exhaust Fan complete of any type and size , cleaning, servicing, painting greasing to bearings checking of nuts bolts , safety split pin, bushes , capacitor and complete spray painting complete all as specified and directed . Note :- Expendable stores like cotton waste/cleaning materials, grease, lubricants, machine screws, safety split pin, bots/nuts and transportation to and from site to work place are deemed to be included in rate quoted.

M&L Fan clamp/Anchor Bolt on the RCC roof Drill holes at the marked locations using a masonry drill bit. Ensure the holes are deep enough to accommodate the entire length of the anchor bolts.Place the mounting bracket over the anchor bolts and secure it by tightening the nuts with a wrench. Ensure the bracket is firmly attached and level.Ensure all connections are secure and the fan is stable complete all as specified and directed .

M&L for repalcing the down rod of ceiling fans with 5 feet GI ceiling fan hanging down rod with necessary clamp accessories complete all as specified and directed

Taking down exiting copper/aluminium sub main wiring complete for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 2.5 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 2.5 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 2.5 Sqmm cable with 01run of 2.5 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

M&L for sub main wiring with two single core PVC insulated FRLS cables with stranded copper conductors 4 Sqmm , 1100 Volts grade in and including PVC conduit medium grade with all fitting & other accessories and copper cable 4 sqmm continuous earth wire complete all as specified and directed . Note: Two runs of 04 Sqmm cable with 01run of 4 Sqmm earth wire along with PVC conduit medium grade shall be measured as one RM

M&L for sub main wiring with Two single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including In Steel conduit medium grade with all fitting & other accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Two runs of 06 Sqmm cable with 01 run of 6 Sqmm earth wire along with Steel conduit medium grade shall be measured as one RM

M&L for sub main wiring with Four single core PVC insulated FRLS cables with stranded copper conductors 6 Sqmm , 1100 Volts grade in and including PVC Casing capping/PVC conduit with all fitting & other accessories and copper cable 6 sqmm continuous earth wire complete all as specified and directed Note: Four runs of 6 Sqmm cable with 01run of 6 Sqmm earth wire along with PVC conduit medium grade/PVC casing capping shall be measured as one RM)

M&L for Cutting chases for concealed conduit wiring, pinning in and making good to surface where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., cutting not exc 10 cm girth including 3 mm thick wall care putty on wall, making surface matching to adjacent surface all as specified and directed.

Supply and fix in replacement sheet metal enclosures double pole MCB 20 Amps with a two pin and earth plug and socket complete with all accessaries etc all as specified and directed . Make: Legrand Cat part: 5078 10 or equivalent make as mentioned in list of makes in PS

S&F in replacement MCB DB 12 way SPN Double door sheet metal enclosure factory made suitable for MCB DB's 240 volts,concealed in wall complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site complete all as specified and directed . Note - MCBs will be measured & paid separately under respective item of sch A, if required to be replaced.

S&F replacement MCB DB 02 way SPN single door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and existing circuits complete as reqd at site complete all as specified and directed.

S&F MCB DB 04 way SPN single door sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar,surface mounting complete including taking down the existing DB of any type & size alongwith its accessories by removing from existing circuits and refixing the new DBs and existing circuits complete as reqd at site complete all as specified and directed.

S&F MCB SP 6 to 32 Amps 240V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed

S&F MCB SPN 40 Amps C Curve working on 240 volts, 50 HZ,10 KA complete all as specified and directed

S&F MCB TPN 40 Amps 415V,10 KA breaking capacity , C curve as per IS/IEC 60898-1 2002 with IP 20 protected terminals all as specified including complete connection with copper /aluminium cable lugs with suitable size for incoming and outgoing complete all as specified and directed .

S&F in replacement of factory made epoxy powder coated Distribution Board TP & N 12 way double door (VTPN MCCB DB) 250 A 4P 16 KA MCCB as In comer, and 10 x 63 TP MCB as outgoing with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified and directed Note: MCCBs and MCBs included

S&F in replacement of 1100 volts grade heavy duty service cable 4 Sqmm two core PVC insulated aluminium solid conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular complete all as specified and directed.

Earthing complete with galvanised iron earth plate electrode 600 x 600 x 6mm as earthing lead buried directly in ground vertically to depth not less than 2.25 mtr below GL with the top edge of the plate not less than 1.5 mtr from GL, connected to GI earth lead of 4.0mm dia, by means of bolts & nuts, to GI and connected to earthing test point all as shown in elecrical plate No. 3 of SSR Part-I of 2009* specified or indicated and testing on completion including excavation / earth work in any type of starta, PCC (1:3:6) type C1 earthing chamber pre cast slab 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric (XPM) weight not less than 4 KG/sqm cast iron frame, funnel with wire mesh GI watering pipe of 20 mm bore medium grade and lugs with and including GI earth wire 4 mm dia with GI protection pipe of 15 mm medium grade 7.5 meter long etc complete tested on completion all as specified and directed. Note: 1. Rate quoted shall deemed to include cost of excavation in any type of strata, RFR and removal upto 50metre, PCC pit, funnel and RCC cover plate. 2. GI wire above 7.5m will be measured and paid seperately.

M & L Installing up to 1 Mtr Angle Iron Post for DB/ Sockets Place the angle iron post in position and secure it using the anchor bolts. Tighten the bolts with a wrench to ensure the post is firmly attached. Use a level to ensure the post is vertically aligned.Attach the DB/sockets to the angle iron post using screws or bolts. Ensure all connections are secure and the DB/sockets are properly aligned.includind foundation of post complete all as specified and directed

S&F distribution box 18 Module x 4 row 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, complete all as specified and directed Make: Legrand Catpart No 601838 or equvaleint in L&T/Schinder

S&F distribution box 12 Module 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, complete all as specified and directed Make: Legrand Catpart No 601831 or equvaleint in L&T/Schinder

S&F distribution box 8 Module 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, complete all as specified and directed Make: Legrand Catpart No 601998 or equvaleint in L&T/Schinder

S&F distribution box 4 Module 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, complete all as specified and directed Make: Legrand Catpart No 601994 or equvaleint in L&T/Schinder

S&F distribution box 3 Module 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, complete all as specified and directed Make: Legrand Catpart No 601932 or equvaleint in L&T/Schinder

S&F in replacement of PVC insulated cable 3 core stranded copper conductor 4 sqmm all as specified and directed by Engr-in-charge. Make : Polycab / Havells

S & F MCCB 63 Amps 4 pole 415 V all as specified and directed by Engr-in-charge. Make L&T, Indoasin,Legrand)