Military Engineer Services Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Electrical and Electronics
Eprocure
Opening Date2 Jul 2024
Closing Date12 Sep 2024
Tender Amount₹ 45,00,000
Costs
EMD
₹ 90,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_663532_1Bid Award Id
ViewTender No
8835/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
S&F in repair for 150mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black etc complete all as specified and as directed.
15
-
-
S&F in repairs extruded brass plate handle, fabricated type polished bright, 175mm long of shape as directed
75
-
-
S&F in repairs extruded brass alloy handle, fabricated type polished bright, 150mm long, of shape as directed
70
-
-
S&F in repairs extruded aluminium alloy Plate handle 'D' Type fabricated type anodized 150 mm long etc all as specified and as directed.
70
-
-
S&F in repairs decorative type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc all as specified and as directed.
30
-
-
S&F in repairs Aluminum anodized barrel tower bolt of extruded section 150mm long etc all as specified and as directed.
80
-
-
S&F in repairs Brass barrel tower bolt, heavy 450mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc all as specified and as directed.
15
-
-
S&F in repairs Brass barrel tower bolt,heavy 600mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc all as specified and as directed.
10
-
-
S&F in repairs 150mm floor door stopper of brass alloy body and tongue, anodised, with hard drawn steel spring fixed in floor etc all as specified and as directed.
25
-
-
S&F in repairs brass wire type 1 gate and shutter, hooks and eyes 200mm etc all as specified and as directed.
50
-
-
S&F in repairs Brass rod 30mm dia fixed including brackets complete for fixing in repair by brass screws etc all as specified and as directed.
50
-
-
S&F in repairs Plain Brass Sheet 3 to 5mm thick fixed to door with brass screws etc complete all as specified and as directed.
50
-
-
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, drain channels, angle plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of existing complete all as specified and as directed. .
200
-
-
S&F in repairs steel curtain rod 20mm dia fixed including fancy type brackets and 6 hooks for each rod complete for fixing in repair etc all as specified and as directed.
100
-
-
Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each complete all as specified and as directed. Note : (i) The rates for necessary scafolding required shall be deemed to be included.
100
-
-
Resecuring or easing & adjusting and refixing in same opening including taking down shutters if necessary and fill the gap, hole, or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door necessary grinding, sanding for getting smooth surface, repair/replacement of damaged rail/panel of any description n.exc 2 sqm each complete all as specified and as directed. .
Note : (i) Rate deemed to be inclusive of 1st class hardwood plain panel, style, rail required to be replaced of size matching wih existing and making the surface good by necessary polishing/painting/oiling
(ii) The rates for necessary scafolding required shall be deemed to be included.
120
-
-
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and as directed. .
110
-
-
S&F 3mm thick glass sheet ordinary quality and glazing with oil putty/wooden beading n.exc 0.5Sqm in each pane complete all as specified and as directed. .
60
-
-
S&F 4 mm thick one side ground glass sheet ordinary quality and glazing with oil putty/ wooden beading n.exc 0.5Sqm in each pane complete all as specified and as directed. .
50
-
-
Supply and fix powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc., aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/ paneling, chromium plated brass/ stainless steel screws complete as per architectural drawings all as specified and as directed.
200
-
-
Taking down Chowkhats or frames not exc. 1.5 sq. m each etc complete all directed by Engr-in-Charge
10
-
-
Taking down Chowkhats or frames exc 1.5 sq. M but n exc 4 sq. M each etc complete all as directed
15
-
-
M&L for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed etc complete all as specified and as directed.
0.98
-
-
Taking down shutters of any description n.exc 1 Sqm each complete all as specified and as directed.
30
-
-
ditto item No 27 above but exc 1 Sqm and n.exc 2 Sqm each complete all as specified and as directed.
25
-
-
S&F factory made 35mm thick 1st class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered wood medium density, supplied and fitted to chowkats, etc complete all as specified and directed by Engr-in-Charge. Note : Manufacturers test certificate alongwith purchase voucher to be submitted by contractor.
30
-
-
S&F factory made 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, both faces is covered with decorative face veneer with lipping / frame to match etc complete all as specified and as directed.
10
-
-
S&F factory made 30mm thick 2nd class hard wood glazed and skeleton shutter open rebated and prepared to receive glass, gauze, etc. ( without sash bars) edges of framing plain, chamferred or rounded fitted with cut and mitered bends for securing glass etc size of members of shutters as specified in as SSR Part I Ses 8 Cl 8.24 (a), etc complete all as specified and as directed.
36
-
-
S&F 100 mm Stain less Steel Butt hinges, heavy weight, cold rolled, etc complete all as specified and as directed.
30
-
-
S&F 125 mm Stain less Steel Butt hinges, heavy weight, cold rolled, etc complete all as specified and as directed.
75
-
-
S&F extruded brass plate handle, fabricated type polished bright, 175mm long of shape as complete all as specified and as directed.
90
-
-
S&F extruded brass plate handle, fabricated type polished bright, 150mm long, of shape as directed
36
-
-
S&F extruded aluminium alloy Plate handle 'D' Type fabricated type anodized 150 mm long etc all as specified and as directed.
30
-
-
S&F decorative type Brass, sliding door bolt 300mm long with sand or die-cast brass hasp,staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed etc all as specified and as directed.
25
-
-
S&F Aluminum anodized barrel tower bolt of extruded section 150mm long etc all as specified and as directed.
55
-
-
S&F Brass barrel tower bolt, heavy 450mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc all as specified and as directed.
5
-
-
S&F Brass barrel tower bolt, heavy 600mm long, with cast or sheet barrel and rolled or cast bolts and fixed etc all as specified and as directed.
5
-
-
M&L for preparation of new wooden surfaces over 10 cm widh or girth and applying two coats of Synthetic enemal paint over a coat of pink primer etc complete all as spd and as directed
120
-
-
M&L for prepararion of wood surfaces and applying two coats of Melamine wood polishing by mechanical method (gun spray) of any description width or girth over one coat of melamine wood primer with wood fillar if necessary etc complete all as specified and as directed .
100
-
-
Dismantling of timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section fixed as in framed work complete all as specified and as directed. .
150
-
-
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards /slabs / blankets, any thickness, including cover fillets complete all as specified and as directed.
215
-
-
M & L for 4mm thick Non Asbestos cement plain sheet 600 x 600 for ceiling on anodized aluminium grid work 610 x 610 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including necessary supporting hanger with 4.0mm dia GI wire and 'J' bolts washer nuts for securing frame work to ceiling suspended @ 120 cm C/C both ways, size of grid shall be 610x610mm complete all as specified and as directed. ,
40
-
-
S&F asbestos cement plain building boards 4mm thk, fixed to timber /GI/MS framework with screws complete all as directed.
50
-
-
S&F in repairs 2nd class hardwood Plain fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 3 sq cm & n exc 6 sqcm complete all as specified and as directed.
150
-
-
S&F in repairs 2nd class hardwood Plain fillets. square, rectangular or triangular in section , clean sawn, secured with nails or brads fixed in repairs.exc 6 sq cm & n exc 13 sqcm complete all as specified and as directed.
175
-
-
Material and labour for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete all as specified and as directed.
50
-
-
Material and labour for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and as directed.
75
-
-
Dismantling timber scantling 40 Sqcm and over in section and at any position as in unframed work complete all as specified and as directed.
0.5
-
-
M/L for IInd class hard wood in scantling exc 40 Sqcm in area clean sawn for unframed work complete all as specified and as directed.
0.5
-
-
S&F in repair 20mm thick 2nd class hardwood clean sawn boards or planks, width n exc. 25 cm complete all as specified and as directed.
50
-
-
S&F in repairs white vitreous china wash down water closet pan (pedestal pattern) with mild steel chromium plated or aluminised hinging device including connection to drown pipe and flushing pipe complete all as specified and as directed.
15
-
-
S&F in repairs Vitreous water closet (squatt pattern) 'long pan', size 580/630mm white with 'P' or 'S' trap, front or back inlet any pattren complete fixed in repairs complete all as specified and as directed.
5
-
-
S&F in repairs plastic water closet seat cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed.
50
-
-
S&F in repairs PVC low level flushing cistern including brackets 10 litre capacity with inlet ball valve float, handle,flush pipe etc. complete fixed as in repairs etc complete all as specified and as directed.
15
-
-
S&F in repairs Toilet paper holder of stainless steel fixed in repair to walls with chromium plated brass screws complete all as specified and as directed.
10
-
-
S&F in repairs for providing two way bib cock cast copper alloy fancy type screwed down high pressure with cruntch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shunk and cup complete all as specified and as directed.
25
-
-
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
25
-
-
S&F in repair for Liquid soap container of glass bottle with stainless steel fittings fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms) etc complete all as specified and as directed.
10
-
-
Supply and fix only stay, suitable for health faucet complete all as specified and as directed.
50
-
-
S&F in repairs vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (including of fixing supply pipe to flushing cistern, trap and waste pipe)
20
-
-
S&F in repairs urinal Valve Auto Closing System with Built-in Control Cock with Wall Flange alloy screwed for iron pipe 15 mm bore complete all as specified and as directed.
20
-
-
S&F in repairs CP urinal spreader fixing with 15mm dia pipe etc complete all as specified and as directed.
35
-
-
S&F in repairs CP urinal connection pipe 15 mm bore 115mm length etc complete all as specified and as directed.
35
-
-
S&F in repairs counter top wash hand basin vitreous china white of size 600x480mm, inlcuding fixing arrangements 15mm dia polythene connection and 32mm dia PVC waste pipe 90cm long etccomplete all as specified and as directed.
20
-
-
M&L for Bottle trap of stainless steel having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms) etc complete all as specified and as directed.
10
-
-
S&F 15mm pillar taps, self closing, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
10
-
-
S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated screw down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and as directed.
10
-
-
M&L for PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed.
25
-
-
Supply & fixinng CP Knob, suitable for Pillar tab Bib tab etccomplete all as specified and as directed.
25
-
-
S&F in repairs SS gratings 100/125mm dia complete all as specified and as directed.
50
-
-
S&F in repairs PTMT gratings 100/125mm dia complete all as specified and as directed.
50
-
-
S&F in repairs 32mm dia waste coupling of ss (half or full threaded) (minimum -weight 32mm-45 gram/40 mm-60gms complete all as specified and as directed.
50
-
-
S&F in repairs 32mm dia PVC (flexible) waste pipe for wash hand basin complete.
50
-
-
S&F in repairs brass chromium plated tubular towel rail 30mm dia D type 60cm long between flanges etc all as specified and as directed.
35
-
-
S&F in repairs 6mm thick looking mirror any size bevelled edge of selected quality glass with aluminium frame channel alround mounted on 4 mm thick commercial ply BWR grade or AC building board fitted to wooden plug with CP brass screws complete all as specified and directed.
20
-
-
S&F in repairs for providing long body bib taps with wall flange ,cast copper alloy chromium plated 15mm fancy type with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and as directed.
30
-
-
S&F in repairs for fancy type chromium type angle stop cock with wall flange cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore of size 15mm dia etc complete all as spd and as directed.
Make : Cera cat part No F1020201 or equivalent make as mentioned at makes list in PS
25
-
-
Dismantling of cast iron 110/75 mm bore pipes jointed in cement motar including all fittings complete all as specified and as directed.
80
-
-
S&F for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 100mm bore pipes etc complete all as specified and as directed.
40
-
-
S&F CI bend 100 mm bore with oval access door etc complete all as specified and as directed..
15
-
-
S & F 100 mm size CI branch piece, single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches etc complete all as specified and as directed.
10
-
-
S&F CI cowl 100 mm size etc complete all as specified and as directed.
15
-
-
S&F for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints fixed to walls using pipes 75mm bore pipes etc complete all as specified and as directed.
40
-
-
S&F CI bend 75 mm bore with oval access door etc complete all as specified and as directed..
15
-
-
S & F 75 mm size branch piece , single (equal or unequal) ordinary or inverted (spigot or socket type) or with parellel branches etc complete all as specified and as directed..
15
-
-
S&F CI cowl 75 mm size etc complete all as specified and as directed.
15
-
-
Taking down SWG / rainwater / PVC pipes 100mm / 75 mm dia (any size or pattern), including all fittings,heads, shoes, bends, swan-necks, etc., complete all as specified and as directed.
150
-
-
S&F Type B, 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed
50
-
-
S&F 110mm dia PVC (SWR) bends any radius complete all as specified and directed
10
-
-
S&F 110mm dia PVC (SWR) junction single(single T), Type B complete all as specified and directed
10
-
-
S&F 110mm dia PVC (SWR) branch piece, single (single Y) equal or unequal, Type B, complete all as specified and directed
10
-
-
S&F Type B, 110mm dia PVC (SWR) vent cowl complete all as specified and directed
10
-
-
S&F Type B, 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed
50
-
-
S&F Type B, 75mm dia PVC (SWR) bends any radius etc complete all as specified and directed
10
-
-
S&F 40mm dia Low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sq. Cm with all fittings Tee and Elbow etc and fixed to wall , floor etc.. complete all as specified and directed
50
-
-
Taking up or down ,15mm dia steel tubing and connections incl cleaning for re-fixing or removal to stores etc complete all as specified and as directed.
130
-
-
Taking up or down , 20mm dia steel tubing and connections incl cleaning for re-fixing or removal to stores etc complete all as specified and as directed.
95
-
-
Taking up or down , 25mm dia steel tubing and connections incl cleaning for re-fixing or removal to stores etc complete all as specified and as directed.
25
-
-
Supply & Fix 15mm dia bore medium grade galvanised tubes with all fittings and fixed to wall, floors etc.. complete all as specified and directed complete all as specified and as directed.
100
-
-
Supply & Fix 20mm dia bore medium grade galvanised tubes with all fittings and fixed to wall, floors etc.. complete all as specified and directed
70
-
-
Supply & Fix 25mm dia bore medium grade galvanised tubes with all fittings and fixed to wall, floors etc.. complete all as specified and directed
25
-
-
Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 15 mm bore pipe complete all as specified and as directed. .
30
-
-
Refixing old steel tubing and conection in new or old position on wall, ceiling, floor etc.. 20 mm bore pipe complete all as specified and as directed.
25
-
-
S&F in repairs PVC flush tank ball cock set complete all as specified and directed.
50
-
-
S&F in repairs spindle for 15mm/20mm CP / brass bib cock, stop cock & concealed stop valves, WHB mixtures etc complete all as specified and directed.
150
-
-
S&F in repairs 15 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
10
-
-
S&F in repairs 20 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
10
-
-
S&F in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
10
-
-
S&F in repairs 40 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
10
-
-
S&F in reairs brass mortice lock,100mm , 4 liver verticle type complete all as specified and as directed.
10
-
-
S&F in repairs door closer hydraulically regulated,aluminium (die cast) body ,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
5
-
-
M& L for cutting holes in brick wall / stone wall / PCC block walls exc one brick but not exc two brick in cement mortar for inserting holdfasts and making good dismantling portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required
10
-
-
Labour for small repair to hinges, tower bolt, handle, latches, sliding door bolt, towel rack etc complete all as specified and as directed.
100
-
-
Febrication only Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') etc complete all as directed
100
-
-
Taking down cement plaster of any description incl racking out joints hacking for key and scrubbing down with water to remove dust etc complete all as specified and as directed. .
50
-
-
M&L for rendering 15 mm thick plaster in CM (1:6) on wall surface finished even and smooth without using extra cement complete all as specified and as directed.
50
-
-
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
375
-
-
M&L for Glazed full body coloured vitrified joint free tiles 1200x600x8-10 mm thick on vertical surfaces such as skirting/ dado laid over 10 mm thick backing coat in CM 1: with ROFF adhesive by Pidilite or equivalent, set and pointed with polymer modified tiles adhesive (colour to match) complete all as specified and as directed.
100
-
-
M&L for full body vitrified coloured non skid tiles, joint free, 8mm to 10 mm thick (Square or rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc set & jointed in neat cement slurry and pointed in ROFF Epoxigrout to match the colour of tile laid over and including 15 mm thick screed bed or bedding layer of cement mortar (1:4) complete all as specified and directed
40
-
-
M&L for 15 to 20 mm thick full body/ digital vitrified/ quartz Slab (of any type) for top surface of steps tread, skid surface, kitchen platform, table top Wash basin etc. pointed and jointed with ROFF Epoxigrout to match the colour of tile over 15mm thick screed bed in CM 1:4 etc complete all as specified and as directed.
5
-
-
M&L for colour Glazed ceramic tiles in vertical surface 450x 300x 7mm or 300X 200X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick backing coat in CM 1:4 etc complete all as spd and as directed
50
-
-
M&L for colour Glazed ceramic joint free tiles in vertical surface 600x 300x 8-10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 15 mm thick backing coat in CM 1:4 with ROFF adhesive by pidilite etc complete all as spd and as directed
50
-
-
M&L for light shed Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in walls etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick backing coat in CM 1:4 etc complete complete all as specified and as directed.
50
-
-
M&L for colour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete complete all as specified and as directed.
30
-
-
M&L for colour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete complete all as specified and as directed.
30
-
-
M&L for colour Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:4 etc complete all as spd and as directed
20
-
-
Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beded & pointed any type of morter complete all as specified and as directed.
144
-
-
M&L for 16 to 18 mm thick granite (of any type any colour) work (table rubbed 7 polished ) in window door cills/jambs, platform like in cement morter (1:6) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as directed.
20
-
-
M&L for 16 mm thick granite both side polished for urinal partition / vertical surfaces etc. in cement morter 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed with granite etc complete all as directed.
10
-
-
M&L for Machine cut cudappah stone slab 20-25mm thick over 15mm thick CM 1:6 screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and as directed.
20
-
-
M&L for 18-20 mm thick granite work (Rough surface, lakha red, flamed where ever necessary,) (table rubbed 7 polished ) thick granite stone slab (of any type ) work (table rubbed and polished ) as in floor, steps, jambs, pillars, window cills, laying over 15mm thick CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting and making good for disturbed surfaces and chamfering for exposed edges,surfaces complete all as specified and as directed.
44
-
-
M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and including polishing complete over and including 20mm thick screed in CM 1:6 all as directed .
50
-
-
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.
50
-
-
M&L for Bees-wax polishing on previously polished surfaces of any description, width or girth including cleaning and preparing the surface etc complete all as spd and as directed.
500
-
-
M& L for sunken treantment to Floors of toilets/Baths/WCs/Kithcen as under :-
(a) Clean the sunken portion of toilet/Bath/WC/Kitchen throughly to remove laitance, dirt, dust, etc.
(b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar ("Dr Fixit" Pidicrete URP" or eqvt)
(c) Sanitary pipes entering through walls and floor shall be sealed with "Dr Fixit Bathseal Tape" and the gaps to be grouted with non-shrink cementitous grout "Dr Fixit Bathseal Grout" or eqvt. Nahani traps, etc to be fitted securely and the gaps around it to be grouted in the same manner.
(d) Apply one coat of a Bitumen-modified polymer coating "Dr Fixit Bathseal Plus" or eqvt on all angle fillets by brush and cover it with 100 mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.
(e) In the remaining area, in dry sustrate condition brush apply first coat of the same coating and further apply second coat when first coat is dry. Extend the coating upto 150 mm above the FFL. Above FFL, another cementitious waterproof coating "Dr Fixit Pidifin 2 K" or eqvt can be further applied right upto 2.1 mm to waterproof the shower area also, it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely.
(f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed M 15 type B0 mixed with intergral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 100mm 1:5:10 type E2.
(g) After completing plumbing work in the toilet/WC/Bath/
Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready-to -make Tile grouts of appd makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc
50
-
-
M&L for the tile joint chemical cleaning and re-grouting carefully by washing the existing tille with heavy duty tile cleaner preferbly of M/S Pidilite or equivalent cleaner, again washing with fresh jet water, scratching the joints and filling the same with (white/matching colour) epoxy tile grout of M/s Pidilite, ROFF RTM epoxy or equivalent, curing, cleaning the surface etc, complete all as directed by Engr-in-Charge and as per the sample done at ground level.
100
-
-
Taking down collapseable shutter area exc 4 sqm but n exc 15 sqm complete all as specified and as directed. .
2
-
-
S&F of collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc, as spefified, erected in position and securing runners with holdfasts and brackets complete all as per clause 10.24 of SSR Part - I 2009. complete all as specified and as directed.
8
-
-
M&L for servicing, overhauling, greasing, easing of existing Collapsible gate of any area or thickness and applying one coat of synthetic enamel paint after preparation of old decorated surfaces on both surfaces etc complete all as specified and as directed.
25
-
-
M&L for two coats of synthetic enamel paint over a coat of Red oxide primer including preparation of new steel/iron surface of any description over 10 cm in width or girth complete all as specified and as directed.
16
-
-
M&L for complete removal of existing treatment form wall to make the surface free from dust, loose paint and loose plaster by scrapping manually / mechanically as directed by engr-in-charge (nails, screws if any to be removed properly before scraping) complete all as specified and directed.
650
-
-
All as per item No 144 above but for Ceiling surface complete all as specified and as directed.
200
-
-
M&L for providing and applying water proof cement base putty of 1mm thick over prepared old plastered / old painted surface to prepare the surface even and smooth upto desired finishes by manually / mechanical means etc complete all as specified and directed.
500
-
-
All as per item No 146 above but for Ceiling surface complete all as specified and as directed.
200
-
-
M&L for one coat of acrylic water based interior grade primer @ 0.8 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied on wall with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface for painting of subbsequent coats complete all as specified and directed.
550
-
-
Ditto all as per item No 148 above but for Ceiling surface complete all as specified and as directed.
200
-
-
M&L for applying two coats of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper shall be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
550
-
-
Ditto all as per item No 150 above but for Ceiling surface complete all as specified and as directed.
200
-
-
M&L for preparation of old surfaces (plastered or unplastered) of walls including cornices, with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying one coat of oil bound distemper on wall using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
2000
-
-
Ditto all as per item No 152 but for Ceiling surface complete all as specified and as directed.
350
-
-
M&L for one coat of acrylic water based exterior grade primer on wall @ 0.9 ltr (undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
150
-
-
M&L for Two coats water based premium acrylic smooth exterior emulsion paint on wall of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.
150
-
-
M&L for preparing old surface with Mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and finished surface smooth, etc. by skilled labour and applying One coat of water based premium acrylic smooth exterior quality emulsion paint on old wall surfaces of approved colour with silicon additive & Color stay Technology, Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti fangal properties in one coat @ 0.75 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over preparing surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI. etc complete all as specified and directed.
500
-
-
M & L for preparation of old wooden surface smooth with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and applying one coat of synthetic enamel paint exc 10 cm width or girth with fully automatic airless spray machine complete all as specified and directed.
250
-
-
M & L for one coat of synthetic enamel paint with fully automatic airless spray machine including preparation of old painted surfaces of wood, wood based surfaces, AC sheet in ceiling exc 10 cm width or girth etc in ceiling incl filling of gaps between wooden planks with putty,POP complete all as specified and directed.
250
-
-
M&L for preparing the old wooden surfaces of any description, with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc or flaming polish which ever is suitable for site and fill the gap or crack with wood filler, POP or putty etc by removing latches / sliding door bolt and refixing the same in the door and apply one or more coats of french polishing till the desired finish is obtained complete all as specified and directed.
500
-
-
M&L for prepararion of wood surfaces and applying one coat of Melamine wood polishing by mechanical method (gun spray) of any description width or girth with wood fillar if necessary to fill the crack and holes etc complete all as spd and as directed
500
-
-
M & L for one coat of aluminium paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed
50
-
-
M & L for one coat of synthetic enamel paint incl preparation of old painted steel surfaces exc 10 cm width or girth complete all as specified and directed
150
-
-
M & L for one coat of Subsequent cement based paint on wall surfaces incl preparation of old treated surface complete all as specified and directed.
200
-
-
M & L for one subsequent coat of white washing on Ceiling surfaces incl preparation of old treated surface complete all as specified and directed.
35
-
-
M&L for preparation of old treated wall surfaces and applying one coat of luster paint using "Electrically Operated Airless spray technology Machine" all as specified and as directed.
500
-
-
M&L for prepration of old painted concrete surface and apply one coat of Plastic emulsion paint on walls exc 10 cm width or girth etc complete all as specified and directed
150
-
-
Ditto aitto all as per item No. 166 above but in ceiling etc complete complete all as specified and as directed.
500
-
-
Taking up/down plants or vegetation growth from wall upto roof level by means of cutting hole into brick wall and making good the surface of dismantled portion (not exc 150 sq cm superfical area and not exc one brick depth) using brick bats /aggregate and plastering in cement mortar (1:4) to distrubed portion and applying two coats of cement base paint / weather coat to match the existing surface upto forth floor complete all as specified and directed
20
-
-
Fixing only Flag post with nails, screws or any suitable means at walls etc complete all as spd and as directed by Engr-in-Charge
10
-
-
S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete etc all as specified and as directed. Make : M/S Shri Laxmi Industries (P) Ltd, Classic or equivalent make as mentioned at makes list in PS
6
-
-
Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar incl arches, pillers etc.. complete all as specified and directed
30
-
-
M&L for precast cement concrete block walling exc. 10 cm width with solid block PCC 1:3:6 type C1 grade design mix and setting in cement mortar (1:6) complete all as specified and directed
30
-
-
M&L for providing rendering 15mm thick on other than fair faces & brick or concrete surfaces in CM (1:4) finishing even and smooth without using exta cement complete all as specified and directed.
306
-
-
Demolition of cement concrete in ground floors and paving n. exe 15cm thick below or above GL all as directed & cleaning premises complete all as specified and directed.
7
-
-
Demolition of cement concrete in ground floors and paving exe 15cm thick below or above GL all as directed & cleaning premises complete all as specified and directed.
25
-
-
M&L for Plain cement concrete in foundations, filling and mass concrete type B-1, 1:2:4 using 20 mm graded stone aggr etc complete all as spd and as directed
32
-
-
Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood, steel members or in PCC sub base exc 4 kg per Sqm etc complete all as spd and as directed.
100
-
-
S&F sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm etc complete all as spd and as directed.
2
-
-
Repair / maintenance of internal light fitting of any type like tube lights / wall bracket light fittings / ceiling lights / mirror lights/ table lamp lights in its position, testing all the compenents / parts, wiring etc, identifying and replacing the defective components like driver, side holders, holders, Table lamps etc all as directed by Engr-in-charge. Note: (i) The rate against the above mentioned item is deemed for cost of labour only. (ii) Cost of spares like lamp holder, connector, connection wire, capacitor etc. replaced against above mentioned item will be measured & paid for separately under respective items of Sch 'A' here-in-below as supply only. (iii) The contractor's representative will report to concerned JE E/M at 0900hrs daily to collect the list of defects and will submit the completion report on following day before 0900hrs to the JE E/M.
(iv) The contractor has to rectify the defects and make the light fittings functional within 24 hours from the time the list of defective lights is handed over to him / his rep by the concerned JE E/M. In case the light fitting is not made functional for whatsoever reason within the specified time limit, an amount of Rs 100/- per such defective light fitting per day will be recovered from the amount due to him through RAR / Final Bill. The repair/maint in Cadets living accommodation (Sqn bldgs) shall be carried out as per the timings convenient to cadets or as directed by Engineer-in-charge and preferably during afternoon and study period. The contractor shall engage separate team of technicians / repairer for each Battalion.
(v) The contractor shall maintain proper record of repair / maint in a binded register duly bringing out the details of spares replaced on each and every light fitting and get it authenticated from concerned JE E/M on daily basis. The contractor shall put up the maint record register to Engineer-in-charge for inspection every Monday or as and when asked for. (vi) The contractor shall maintain sufficient stock of spares / material required for repair / maint of light fittings with the concerned JE E/M.
(vii) The Electricians should be ITI (Electrical) qualified and the contractor should submit the copy of certificates of electricians while sigining the site orders.
425
-
-
Supply only PVC / polycarbonate Angle/Batten type lamp holders retrofit type complete all as specified and directed
20
-
-
Supply only switch piano flush type 5 Amps SP one way complete all as specified and directed
50
-
-
Supply only switch piano flush type 20 Amps SP one way complete all as specified and directed
40
-
-
Supply only socket outlet 3 pin 5A flush type complete complete all as specified and directed
30
-
-
Supply only socket outlet 2 in 1 3 pin 5 and 15 Amp flush type complete all as specified and directed
30
-
-
Supply only ceiling rose, 3 terminals /PVC/Polycarbonate, isolated body complete all as specified and directed.
100
-
-
Supply only capacitor of 1.5 mfd for wall fans complete all as specified and directed
30
-
-
Supply only capacitor of 2.5 mfd for ceiling fan/exhaust fan complete all as specified and directed.
150
-
-
S&F in replacement of fan regulator electronic step type suitable for 1200/1400 mm sweep fan as per the sample provided by the Site-in-charge complete all as specified and directed.
30
-
-
S&F in replacement of modular fan regulator, 2 module, suitable for ceiling fan of 1200/1400mm sweep complete all as specified and directed
50
-
-
S&F in replacement of Modular socket 6 A 2/3 Pin 2 module complete all as specified and directed.
50
-
-
S&F in replacement of Modular socket 6A/16A - 2/3 Pin 2 Module complete all as specified and directed.
50
-
-
S&F in replacement of modular switch 1 way 10 A 1 module. complete all as specified and directed
150
-
-
S&F in replacement of modular switch 1 way 20 A 1 module with neon indicator complete all as specified and directed.
40
-
-
S&F in replacement for modular switch 2 way 10 A 1 module complete all as specified and directed.
30
-
-
S&F in replacement of 1 and 2 module Blanking plates. complete all as specified and directed
100
-
-
S&F in replacement of door bell AC 230 volts single phase ding dong type all as specified and directed.
25
-
-
M&L for securing loose wiring and repair to point wiring with necessary rigid non metalic PVC casing caping double lock type ISI marked inclusive all accessories complete as specified and directed.
200
-
-
Taking down carefully copper/aluminium point wiring (light/fan/socket) including all accessories wire, casing caping/conduit, screws etc and making good the disturbed surfaces all as directed
85
-
-
M&L for point wiring with 1.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 1.5 sq mm copper conductor as earth wire to common earth dolly including PVC box suitable for modular type switches, sockets, fan regulator etc for following :-
One light/Fan point controlled by one way switch 6 Amps 240 volts
35
-
-
Ditto as per item No 199 above but One 3 pin 6 Amps socket out let point on independent board.
20
-
-
Ditto as per item No 199 above but One 3 pin 6 Amps socket out let point on same board.
10
-
-
Ditto as per item No 199 above but One light point controlled by two 6 Amp two way switches .
5
-
-
M&L for point wiring with 2.5 sq mm copper conductor FRLS (multistrand) PVC insulated ISI marked unseathed cable and including surface, Non metalic rigid PVC casing capping double lock type ISI marked not less than 25 mm with all fitting & other accessories and also including PVC insulated ISI marked unseathed FRLS cable size 2.5 sq mm copper conductor as earth wire to common earth dolly including PVC box suitable for 15 Amps socket outlet power point independent circuit
15
-
-
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3mm thick, burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia of minimum 15m length by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 in SSR PART-I connected to earthing test point all as specified or indicated including provision of earthing lead protection pipe, PCC earth pit with cover, excavation & earth work, testing on completion etc all as specified and directed
1
-
-
S&F in replacement of GI pipe bracket of 25 mm dia 1 mtr long bend to shape for street light fitting made out of 25 mm dia GI light grade pipe fixed on pole using suitable FI clamp including necessary new nut, bolt and washer complete all as specified and directed.
10
-
-
S&F in replacement LED security light fiitting 30 W,IP-65 protection made up of die cast alluminium housing with high power LED as lighting source and lens embeded PC cover having TOP opening seperate driver compartment complete all as specified and directed
10
-
-
S&F in replacement stator motor suitable for light duty fresh air ventilation fan of any sweep(approx 225/250mm) and replacing plywood of not less than 15mm with duly coated with synthetic enamel paint as per the existing arrangement.
10
-
-
M&L for Sub main wiring with PVC insulated FRLS grade cable LT 1100 Volts grade PVC insulated unsheathed, multistranded with stranded copper conductor drawn through & including surface type PVC casing & caping of not less than 25 mm including drawn on wall/ceiling/through stair case/wooden surface with all accessories and incl cutting of existing surfaces of any type and making good to match with the existing surfaces acrylic sheet work after completion alongwith one contineous earth wire and connected to common earth complete all as specified for following sizes of cable :- 2 x 2.5 sq mm with one continuous earth wire of size 2.5 sq mm
Note : 2 runs of 2.5 sq mm cable and one run of 2.5 sq mm earth wire and PVC casing/capping will be measured as one meter.
30
-
-
Ditto as per item no 208 above but 2 x 4 sq mm with one continuous earth wire of size 4.0 sq mm
Note : 2 runs of 4 sq mm cable and one run of 4.0 sq mm earth wire and PVC casing/capping will be measured as one meter.
40
-
-
Ditto as per item no 208 above but 2 x 6 sq mm with one continuous earth wire of size 6.0 sq mm
Note : 2 runs of 6 sq mm cable and one run of 6 sq mm earth wire and PVC casing/capping will be measured as one meter.
20
-
-
Taking down carefully sub main wiring of any type and size and making good disturbed surfaces complete as directed.
90
-
-
Taking down ceiling fan/exhaust fan of any sweep for servicing / repairing / maintenance, opening up, identifying and replacing the defective parts, cleaning, greasing,etc, reassembling and hanging up/fixing back at its original position, connecting up and testing complete all as directed.
60
-
-
S&F aluminium fan blade for exhaust fan of any sweep/make as per the sample given by the site-in-charge.
20
-
-
S&F bearing No.6201/6202/6203/6204 or any other No matching to the existing size and suitable for ceiling fan/exhaust fan/wall mounted fan of approved make
100
-
-
Disconnecting electric connection and taking down carefully fan of any type and size/sweep as described below, removing the burnt winding of fan motor rewinding with super enarneled copper winding wire of suitable gauge or of matching size to the exisiting wires including all insulating material such as insulation paper sleeve, tape, varnishing etc and reassembling, testing, transporting back to site and refixing to original position all as directed by Engineer-in-charge.
Air circulator fans/Pedastal fans of size 600/450 mm sweep wall mounting Oscillating type
20
-
-
Ditto as per item no 215 above but Wall mounted fans size 350/400 mm sweep Oscillating.
10
-
-
Ditto as per item no 215 above but Exhaust fan of 225/300 mm sweep.
10
-
-
Preparation of old surface of exhaust fan of any sweep by removing old paint using paint remover or by burning off using blow lamp and cleaning with cloth and Spray painting complete exhaust fan with superior quality synthetic enamel paint (Smoke gray) after applying primer complete all as directed.
20
-
-
Dittto all as per item no 218 above but Air circulator/Pedestal of size 450/600 mm sweep with superior quality enamel paint (Grey) complete all as directed.
20
-
-
S&F in replacement MCB DB sheet metal enclosure factory made suitable for MCB DB's 240 volts with 200 amp rated busbar, neutral & earthing link bar, flush/surface mounting complete including taking down the existing DB of any type & size by removing from existing circuits and refixing the new DBs and circuits complete as reqd at site of following type: 04 way SPN DB (double door) Note: Cost is deemed to be included for removing concealed DB box and fixing new DB and making good the disturbed surface as reqd at site.
Make: Havells QVE Plus DHDMSHODOW04 or equivalent make as mentioned at makes list in PS
2
-
-
Dittto all as per item no 220 above but 08 way SPN DB (Double door)
Note: Cost is deemed to be included for removing concealed DB box and fixing new DB and making good the disturbed surface as reqd at site.
Make: Havells QVE Plus DHDMSHODOW08 or equivalent make as mentioned at makes list in PS
2
-
-
S&F in replacement factory made epoxy powder coated Distribution Board TP & N 4 way double door (VTPN MCCB DB) MCCB as In comer, and MCB as outgoing with metal door (IP-43 protection) fabricated from CRCA sheet and fixed semi flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removable gland plates with Knockout semi flush to wall and making good disturbed surface and touch up with the same finishes complete all as specified Note: MCCBs and MCBs will be measured and paid seperately under respective Sch A item in the schedule
1
-
-
S&F in replacement of MCB single pole 6-32 Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve all as specified and directed.
20
-
-
S&F in replacement of MCB DP 6-32 Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve all as specified and directed.
10
-
-
S&F in replacement of MCB SPN 40- 63 Amps working on 240 volts, 50 HZ AC, 10 KA 'C' curve all as specified and directed.
10
-
-
S&F in replacement of MCB TP 40-63 Amps working on 415 volts, 50 HZ AC, 10 KA ,'C' curve all as specified and directed.
3
-
-
S&F MCCB with rating of 100 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals all as specified and directed. .
2
-
-
S&F MCCB with rating of 125 Amps,415Volts 3pole with 16kA breaking capacity,thermal magnetic asdjustable of overload & short circuit release as per IS-13947 & IEC 60947-2 & the service short circuit breaking capacity (Ics) should be equal to ultimate breaking capcity(Icu).MCCB should be with suitable spreaders and phase barriers for each terminals all as specified and directed. .
2
-
-
Supply and fix in replacement sheet metal enclosures Single pole MCB 20 Amps with a two pin and earth plug and socket complete with all accessaries etc all as specified and directed.
4
-
-
Supply & fix in replacement neon lamp indicator square/round type all as specified and directed. .
5
-
-
Supply and fix in replacement metal clad plug top 3 pin, 20 amps, ISI marked heavy duty all as specified and directed. .
20
-
-
S&F in replacement plug top 3 pin, 15/16 amps, 230 volts, ISI marked all as specified and directed.
30
-
-
S&F in replacement plug top 3 pin, 5 amps, 230 volts, ISI marked
10
-
-
M&L in replacement of ply wood sheet of 10 mm thickness for Exhaust fans and cutting to the size as required at the site including fixing the same with necessary nuts and bolt arrangement all as specified and directed.
5
-
-
M&L for repalcing the down rod of ceiling fans with 5 feet GI ceiling fan hanging down rod with necessary clamp accessories all as directed.
10
-
-
M&L in replacement of acrylic sheet of 4mm thickness cutting to the size as required at the site including fixing the same with necessary screw arrangement.all as specified and directed.
15
-
-
S&F 1x10W,230V, LED batten suitable for indoor application of color temperature 6000K surface /wall mounted LED batten including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified and directed.
50
-
-
S&F in replacement 1x20 watt,230V surface and wall mounted emergency LED batten having backup upto 4 hours with polycarbonate housing and integrated electronic electronic driver including connecting up with twin core twisted flexible copper conductor cable from ceiling rose all as specified .
100
-
-
S&F in replacement surface mounted LED Panel lights size of 600mm x 600MM x 35mm 40 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.
12
-
-
S&F in repalcement surface mounted LED Panel lights size of 1200mm x 300MM x 35mm 48 W LED 5700K, 240Volts and glare free symmetrical illumination suitable for ceiling, Environmental friendly, new generation, energy saving, high power LED as a light source with clear diffuser and separate replaceable electronic driver including connecting with twin core wire and also matching to the adjacent ceiling surfaces carefully all as specified and directed. Note: The quoted price shall include the cost of Light and its driver.
10
-
-
S&F in replacement recess type LED ceiling lights 20 W LED with ceiling cut out of Ø 160 mm, 6000K Environmental friendly, energy saving, recess mounted downlighter with electronic driver including connecting with twin core wire, including cutting the existing false ceiling dia to the required size and also matching to the adjacent false ceiling surfaces carefully all as specified and directed.
16
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements