Military Engineer Services Tender

M&L in repair for jointing & testing heat shrinkable cable joint kit , straight through , out door type for 1100 volts LT XLPE/PVC insulated cable of aluminium conductor 70 sqmm to 120 sqmm 3.5 core cable including necessary jointing work ,complete all as specified & directed by the Engineer in charge. Make: Raychem/Denson/G seal

M&L inrepair for jointing & testing heat shrinkable cable joint kit , end termination , out door type for 1100 volts LT XLPE/PVC insulated cable of aluminium conductor 50sqmm to 120sqmm 3.5 core cable including necessary jointing work all as specified & directed,complete all as specified & directed by the Engineer in charge. Make: Raychem/Denson/G seal

Restringing of existing LT overhead line of copper/ACSR conductor after opening of binding wire from insulator and bringing the sag within permissible limit ,rebinding the same with insulator with 16 SWG aluminium wire/suitable copper wire all including renewal of jumpers by providing heavy duty alkathine pipe of approved quality, reconnecting the service connections after cleaning the carbon and foreign material ,complete all as specified & directed by the Engineer in charge. (Note : All the tree branches obstructing to the O.H line shall be trimmed up to 3 mtr away from the O.H line. Unit rate quoted shall be deemed to be inclusive of charges for the trimming of trees.) Note : T &P for above mentioned work included in quoted rate.

S& F in repairs pin type porcelain, vitreous, white, brown or green insulator including one mild steel spindle, two galvanised iron washers and one galvanised iron nut 100mm height, 65 mm dia for 1100 volts grade on existing cross arms on LT poles ,complete all as specified & directed by the Engineer in charge.

S&F in repairs shackle type porcelain, vitreous white brown or green, insulator for working pressure 6600 volts of 150 mmx 125mm including galvanised mild steel straps of 38x5 mm size 20mm dia bolts, washers & nuts or 50x6 mm size Flat iron D clamp etc on existing cross arms on LT pole ,complete all as specified & directed by the Engineer in charge.

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in soft soil.

Excavation in trenches n. exc 1.5 Mtr wide and n. exc 1.5 mtr in depth and getting out in hard soil.

Returning Filling in including spreading, leveling, watering & well ramming in layers n. exc 25 Cm.

Removing excavated/Surplus soil n exc 50 Mtr & depositing where directed at a level n. exc 1.5 Mtr above the starting point.

M&L in repair for double wall corrugated (DWC) duct (dure guard) as per IS 14930 part II LT UG cable protection including coupler, elbows, T joiints, Bends etc. and test report Make: Dura line/ Gemini/ TelRex of size 38mm inner dia and 50mm outer dia ,complete all as specified & directed by the Engineer in charge.

M&L in repair for double wall corrugated (DWC) duct (dure guard) as per IS 14930 part II LT UG cable protection including coupler, elbows, T joiints, Bends etc. and test report Make: Dura line/ Gemini/ Rex of size 63mm inner dia and 75 mm outer dia ,complete all as specified & directed by the Engineer in charge.

Supply and laying,testing & commissioning on wall /plinth/surface/trenches with saddle & pressure plate in repairs LT XLPE insulated/PVC heavy duty armoured cable 1100 volts grade multi-stranded aluminium conductor electric cable cross sectional area 25 Sqmm 3.5 Core including necessary connection with provision of lugs/thimble & cable gland fixing arrangements ,complete all as specified & directed by the Engineer in charge.

All as per item above but size 70 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements ,complete all as specified & directed by the Engineer in charge.

All as per item above but size 50 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements ,complete all as specified & directed by the Engineer in charge.

All as per item above but size 35 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements ,complete all as specified & directed by the Engineer in charge.

All as per item above but size 16 Sqmm 4 Core including necessary connection with lugs, cable gland & fixing arrangements ,complete all as specified & directed by the Engineer in charge.

All as per item above but size 95 Sqmm 3.5 Core including necessary connection with lugs, cable gland & fixing arrangements ,complete all as specified & directed by the Engineer in charge.

S&F in repair for cable joint termination box PVC body housing suitable for housing and including 100 amps rated aluminium bus bar,suitable MCB SP, 3 phase, 4 wire system mounted on PVC insulators for one incomming and two out going cable entry space mounted on street light PCC/ tublar pole with 25x3 mm GI clamps with GI nut, bolts washers ,thimble etc & Make: Sintex /C&S/National& double compression gland of Make : Dovel or comet, complete all as specified and directed by Engineer-in-Charge.

M&L for Cable route indicator fabricated from 600x180x40mm Precast RCC/PCC , duly painted with yellow colour synthetic enamel paint complete marking name in black colour using tensils " LT cable/HT cable/HT cable Joint" in letters with suitable visible font including grouted in ground with PCC 1:4:8 type D-2, compete all as specified and directed by Eng- In Charge

M & L in repair for cement concrete (1:3:6 ) type C-1 using 20 mm graded stone aggregate, including weathering, slightly rounded Chamfered angles and throating including necessary form work all as directed .

M & L in repair for cement concrete (1:4:8 ) type D-2 using 40 mm graded stone aggregate, in foundation all as directed .

Material & labour for carring out fault detection of H/LT XLPE electrical cable located inside 25 ED station complex through cable fault detector van of MSEDCL (testing division) or equivalent approved vendor,identifing the the fault carring out necessary exacavation for verification of fault& fault confirmation , complete all as specified and directed by Engineer-in-Charge. Note ; If fault not located by the contractor within specified time a recovery of an amount of Rs 5000/- will be recovered per day.

Material & labour Preparation of old painted steel surfaces pole H/LT (of any crooss section) of 9 meter length of cross arms, bracings supports of steel poles by scrapping out existing paint,applying red oxide primer on pole surface and painting two coats of aluminium paint with alternate strip of blue paint at an interval of 1 feet from bottom of pole upto 6 feet height,and marking of pole numbers using tensils in white with black background rectunglar/eleiptical on pole with suitable size font ,complete all as specified & as directed.

Material & Labour for Preparation of old painted surfaces of concreate poles H/LT , 9 Mtr long and painting with two coats of weather proof apex paint white coloured with alternate strip of blue paint at an interval of 1 feet from bottom of pole upto 6 feet height, Also marking of pole numbers using tensils in white with black background rectunglar/eleiptical on pole,also painting the cross arm with silver paint complete , complete all as specified & directed by the Engr-in-Charge.

M&L in repair for cross arms, bracings, supports, clamps and back plates fabricated from strucural steel sections MS Flat including nuts, bolts, washers,welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated, with & inclusive of one coat red oxide primer & one under coat and one finishing coat of synthetic enamel paint after preperation of surfaces , complete all as specified and directed by Engineer-in-Charge

M&L for maintenance & servicing of servo voltage stablilizer 5-25 KVA three phase 440 V for as per sample, section Indoor type after disconnecting incoming & outgoing LT connection / Earthing and opening the voltage stabilizer complete and cleaning throughly, removing, cleaning old gasket and replacement with new gasket and servicing of servo motors as recommonded by the manufacture insulating properly with genuine material, and stablizer body gasket reassembling the voltage stabilizer with and repair /maintance/replacement of volt meter, Am meter, PF meter, indicator lamp RYB, servo motor, resitance contact and remounting on foundation, complete with connecting back all removed electrical earth connection and testing on completion of functioning of the Voltage Stabilizer for stable voltage output, completed all as specified & as directed by Engineer- In - Charge.

S&F in repairs MCCB four pole, 415 Volts, of rating capacity not less than 630 Amps, 50 KA, 50 Hz, ICS=100% ICU with thermal setting adjustable 70-100% of capacity including dismantaling and reconnecting all necessary connections & testing complete.Make : Legrand/Siemence/L&T

S&F in repairs MCCB four pole, 415 Volts, of rating capacity 200 Amps, 36 KA, 50 Hz, ICS=100% ICU with thermal setting adjustable 70-100% of capacity including dismantaling and reconnecting all necessary connections & testing complete.Make : Legrand/Siemence/L&T

S&F in repairs MCCB four pole, 415 Volts, of rating capacity 160Amps, 25 KA, 50 Hz ICS=100% ICU with thermal setting adjustable 70-100% of capacity including dismantaling and reconnecting all necessary connections & testing complete.Make : Legrand/Siemence/L&T

S&F in repairs on load change over switch of capacity 200 Amps in sheet steel enclosure, 415 Volts, 50 Hz, AC, 4 pole including necessary connections & modification in existing panel if required complete all as directed by Engr-in-charge.

All as per item no above but 63 Amps capacity

All as per item no above but 100 Amps capacity

S&F in repairs off load change over switch of capacity 200 Amps in sheet steel enclosure, 415 Volts, 50 Hz, AC, 4 pole including necessary connections & modification in existing panel if required complete all as directed by Engr-in-charge.

All as per item above but 63 Amps capacity

S& Fin repair High efficiencyL70B5050000 burning hours LED fitting with SMD LED package mounted MCPCB, lumen efficacy ≥140lm/W & viewing angle of 120 ˚ powered by built in potted,isolated electronic SMPS based driver with lower THD,Output open/short circuit protection,over voltage protection & surge protection 4KV,UV stabilized,polycarbonate cover & PC lens to ensure better light distribution not less than 50 W suitable for façade lighting with RGB controller & drivers Cat part No JETAQUANTOPLUS50WLEDREDGREENBLUE P30DPC in Havells or Crompton/WIPRO, complete all as specified and directed by Engineer-in-Charge

Maintenance of two pole structure including cleaning the parts and replacement of jumper, worn out insulators, greasing with silicon grease, alligning of GOD knife and tightening of GOD parts containg any nos. of GOD's ,complete all as specified and directed by the Engr In charge

Maintenance of four pole structure including cleaning the parts and replacement of jumper, worn out insulators, greasing with silicon grease, alligning of GOD knife and tightening of GOD parts containg any nos. of GOD's ,complete all as specified and directed by the Engr In charge

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI wire 4 mm dia through GI pipe 15 mm dia light grade by means of bolts,nuts, check nuts and washers of galvanised iron or steel,with adequate quantity of charcoal and salt, proper watering arrangements including 20 mm dia medium grade GI tubing.PCC chamber,Chamber Cover all as shown in electrical plate No 3 of SSR part I 2009 connected to earthing test point all as specified or indicated and testing on completion. The end point connection of eatrhing will be carried out with the help of GI bolt grouted and washer and nut.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6 mm thick, burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to GI strip 25x4 mm through GI pipe 40 mm dia light grade by means of bolts,nuts, check nuts and washers of galvanised iron or steel,with adequate quantity of charcoal and salt, proper watering arrangements including 20 mm dia medium grade GI tubing.PCC chamber,Chamber Cover all as shown in electrical plate no 3of SSR part I 2009 connected to earthing test point all as specified or indicated and testing on completion. The end point connection of eatrhing will be carried out with the help of GI bolt grouted and washer and nut.

M&L for removal of green vegetation from substations, pumphouse area by spraying the weedicide chemical Glufosinate ammonium 13.5% W/W SL using spray pump for burning of the grass on 500 Sq M Area including removing the vegetation fromits roots from existing place & depositing the vegetation away from the places , complete all as specified and directed by Engineer-in-Charge

M&L for maintainance of LT panel/feeder piller box indoor/outdoor type by cutting corroded MS lid from panel, weilding the same with 3 mm thick./ MS sheet in any desired shape including removing the carbonised/ melted sparked thimbles cleaning the carbonised bus-bar making cable end clean, welding/ replacement of broken hinges with new one,replacement of locks with new one (as per reqiurement ) mounted on exisiting door , including taking elect shut down and cleaning the all bus bar system , incomming and out going cables,replacement of burnt thimble/caple pieces by using new thimble,cleaning of MCBs/ MCCBs with blower and charge the eletrical panel painted surfaces of outdoor LT panel including scraping out old paint and painting with two coat of synthetic enameled siemens grey paint complete all as directed including marking of building number on front face of panel in colour as directed by Engr In charge.

M & L for Arcus Floodlight Round 3K luminaire with high purity lense for superior performance with narrow beam angle of 15/30/60degree beam angle not less than 60 W suitable for façade lighting Cat part No LF04-671-06-30-G2 in Wipro or Equivalent in Havells or Crompton, complete all as specified and directed by Engineer-in-Charge

Material and labour for earthing (in repair) complete with copper earth plate electrode of size 60cm x 60 cm x 3.0 mm thick buried directly in ground ( earth pit not less than 2.25 mtr deep below ground level) with top edge of earth plate not less than 1.5 mtr below ground level connected to copper strip 20 x 3 mm by means of galvanized iron nuts & bolts or as directed at site by Engineer -in-Charge protected by GI Pipe 40 mm dia light grade and connected to test point and further connected to equipment, machinery, electrical panel or any other as directed by Engineer-in-Charge, which to be earthed, all as shown in electrical plate No 3 of SSR Part I including provision of concrete earth pit constructed in PCC 1:3:6 type C-1 as earth pit and PCC 1:2:4 type B-1 for cover slab with necessary reinforcement with handle for lifting also including provision of funnel with wire mesh with 20 mm GI pipe medium grade for watering, charcoal and salt in alternative layers of 15 cm thick all around the electrode , including necessary excavation and earth work in any type of strata/soil , testing and commissioning complete all as directed.

Supply, install, testing and commissioning of cubicle type outdoor LT feeder pillar box CPRI approved fabricated out of 3.15mm thick CRCA sheet of with separate locking arrangement, painted with epoxy powder coated over a coat of red oxide primer, factory made, cubicle type, double door hinged type, both side openable, mounting electrical accessories, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40x40x5 mm angle iron frame, adequate clearance from ground level for the entry and exit of cables, provision of ventilation on sides, mounted on suitable MS stand, necessary PCC work for grouting and provn of cable lugs for connection etc. complete and consisting of following:- (a) MCCB 125A 4 pole, 25 KA -01 Nos ( as main incomer), (b) LED indication lamps 3 Phase,(d) 32 to 42 Amp MCB 4 TPN - 04 Nos as out goinnig (e) Aluminum bus bar TPN of 1.5 times main incommer current capacity.

Labour only for following services are to be provided for to carry out the preventive maintenance for existing electrical LT equipment of 1100 Volt and LT over head lines and all accessories by employing requisite numbers of man power (Electricians and helpers shall be experienced in their trades hereafter will be refered as trademan).will report to JE E/M in charge of receiving sub station for to receiving instructions to carrying out repair at sharp 0900 hrs on every working day i.e. for 8 hrs with necessary tools complete all as directed. (a). Carrying out periodaical checking and maintenance of LT panel (b). Checking and tightning of all jumpers, earth connection, Lightning Arresters, fuses including putting of fuses and necessary repair and maintenance as required and as directed by Engineer-in-Charge / Rep of dept in all four pole structure under complete area of 25 ED AF. (c).Checking and tightning of all jumpers, earth connection, tightning of ACSR conductor and necessary repair and maintenance as required and as directed by Engineer-in-Charge / Rep of dept in all LT O/H Feeders and LT Two pole structure under complete 25 ED AF area. (d).Checking of Earthing, test points, earth leads, periodical testing of earth resistance, cheching and rectification of earth neutral voltage fault all as directed by Engineer-in-Charge. (e).Carrying out minor repair of LT Panel and MCCB DBs tightning of terminal studs, ftc. (f). Carrying out maintenance and repair to Indoor / Outdoor LT distribution Feeder Pillar Box checking of all terminals, internal wiring, replacement of fuses all as required and directed by Engineer-in-Charge. Note :-1. The above quoted rates are deemed to include the cost of labour for cleaning of grass / bushes around the machines, plants, machines, transformers, Two/Four pole structure and Fencing for above installation. Note 2:-. Complete material and necessary T&P ( earth megger, multi meter, all electrical tools, ladder, trasportation etc.) as required for rectification of defects/attending to fault shall be arranged by contractor and cost of the same will be deemed to be included in the unit rate quoted. 1) Complaints/Defects will be rectified withen 8 Hrs of intimated time. If complaints not rectified, a recovery of an amount of Rs 150/- per complain per day penalty will be recoverd from the RAR/ FB under any circumstances trademan found absent from duty recovery of Rs 500 per day per indivisual shall recover from RAR/FB. ii) Rates inclusive of T&P required safety equipment, and transport required contractor shall arrange on his own arrangement, iii).Compliants given on any electronic media i.e SMS, email or whats app etc and in writting shall be count as valid compliant & contractor to take immediate action within stipulated time as mention in note above Note:-3. Any casualty or injury sustained by the contractor’s workers during the working hours shall be sole liability of the contractor. No claim on this account shall be entertained by the department

M&L for Boring of holes under road, pavement, hard standing not less than 0.7 Meter below GL by trenchless technology by doing excavation at both side of and passing the seamless 150 mm dia HDPE pipe by bringing complete set up at site , complete all as directed by Engr-in-Charge.

S&F in repair/replacement Air Circuit Breakers Conforms to IS/IEC 60947-2 & IEC 60947-2 Current rating from 630 A in 4 Pole, Manually & Electrically operated, Fixed with Draw-out versions High short time fault withstanding capacity, Icu = Ics = Icw for 1 sec for total selectivity High mechanical and electrical operating life Self diagnostic Microprocessor based Releases with on-load testing through TEST button and Inbuilt thermal memory , Data communication & Power Management Protection Releases conform to EMI/EMC standards Breaker Status and Control through MODBUS protocol (UN-CO module) Protection through Thermal - Magnetic (DN1) & Microprocessor releases (SR18G, SR18G+D, SR18Gi+D & SR71) 100% rated neutral pole complete all as specified and directed

Supply, install, testing and commissioning of cubicle type outdoor LT feeder pillar box fabricated out of 3.15mm thick CRCA sheet with locking arrangement, painted with epoxy powder coated over a coat of red oxide primer, factory made, cubicle type, double door hinged type, both side openable, holes for cable entries, detachable gland plates at bottom, earth connection terminals etc. and mounted on 40x40x5 mm angle iron frame, adequate clearance from ground level for the entry and exit of cables, manufacturer details, necessary PCC work for grouting and provn of cable lugs for connection, internal metering connections with suitable copper cable mounted on cable tray and internal power connection with single core flexible copper cable/busbar of suitable capacity etc. complete and consisting of following:- (a) MCCB 63 Amp 4 pole, 16 KA -01 Nos ( as main incomer), (b) MCCB 40 Amp TP16 KA - 02 Nos ( as out going ) , (c) Aluminum TP bus bar 120 Amp & 60 A Neutral bus bar mounted on insulators duly colour coded heat shrinkable sleeve (d) Digital ammeter alongwith suitable CTs (e) Digital voltmeter. (f) RYB LED indications (g) Terminals for input( 01 No) and outpot cables ( 04 Nos) , copper cables connection for input terminal to MCCB and from outgoing MCCB to output terminals

Taking down of carefully existing old unserviceable over head LT conductor,cross arms ,clamps , insulator of hight 9 to 11 Mtr pole SMQ and OMQ area complete with safety precaution contractor and super wiser insure road traffic movement, and wild animal during taking down over head LT conductor Complete with closed conductor 1.5 to 2 Mtr circumference and tight with binding wire deposits to E&M store. Note 1: Material and necessary T&P for taking down of LT over head line, all electrical tools, ladder, transportation shall be arranged by contractor and cost of the same will be deemed to be included in the unit rate quoted. Note 2: Any casualty or injury sustained by the contractor’s workers during the working hours shall be sole responsibility of the contractor. No claim on this account shall be entertained by the department. Note 3. 5 to 6 conductor taken as one length for measurement.

M&L for fabrication of 1.2 meter standard bollard on 90 mm ID & 5 mm thick MS pipe with 28 nos of Hole on its periphery of dia 12 mm to 15 mm including internal worm white shade lights sealed at top for preventing moisture/water ingress complete all as specified & as directed by Engineer -IN-Charge Make From Re-insource or Equivalent.

Supplying and fixing 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed , 6 sq mm multi-stranded twin core cable flat cable all as specified and directed.

Disconnecting /isolating electric supply from the source at HT/LT electrical pole/wall/tower height up to 15 mtr from ground and taking down carefully for repair the existing unserviceable street light/security light/flood light /any type of carbonisation or any type of cable fault and repair by checking and making the fittings serviceable by replacing the unserviceable parts or fitting as required at site, under relevant items as supply only ( item for Ser no 56 to 63 & 67 to 75 ) rates subsequently- followed as mentioned here in under, by the contractor for replacement to suit the existing parts and fittings (fixing charges for replacement shall be deemed included in the quoted rates against serial item No. 1) complete tree prunning around the 1 meter area of light source till ground to avoid any kind of obstructionr all as directed by Engineer in charge, connecting with source and testing for proper functioning / serviceability of the fittings complete as directed. Note:- Complaints/Defects will be rectified within 8 Hrs of intimated time. If complaints not rectified, a recovery of an amount of Rs 250 per complains per day will be recovered from the RAR/FB. Complaints detailed on media like whatsapp /text message/ complaints slip shall be treated as valid complaints,complete all as specified & as directed by Eng-In-Charge.

Supply only LED outdoor drivers up to 48W of suitable for LED fittngs as per existing,complete all as specified & as directed by Eng-In-Charge.

Supply only LED outdoor drivers up to 60 to 90 W of suitable for LED fittngs as per existing,complete all as specified & as directed by Eng-In-Charge.

Supply only LED flood light outdoor drivers up to 90 to 120 W of suitable for LED fittngs as per existing,complete all as specified & as directed by Eng-In-Charge.

Supply & Fix in repair Smart Integrated ALL-IN-ONE Solar perimeter/Street Light including galvanized steel poles & PCC foundation with built in Mono Crystalline Panel, Lithium Ferro Phospate (LiFeP0 4) Battery, MPPT Charge Controller and PIR Sensor with Colour Temperature 6000-6500K,16 W. 2 days autonomy with dimming profile & dusk down sensor complete all as specified Bajaj BSZSL 30W equivalent in crompton/ Havells,complete all as specified & as directed by Eng-In-Charge.

Supply only LED street light fittings 70 watt with minimum110 lumen/ watt system lumen output .The luminaire should have cool white coloure temperature with minimum 5700 K. The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV with 5 Year manufacturer warranty. Make Crompton CAT No CRP-409-70-57-SL-GL-NSG or equivalent in Havells/ Phillips.complete all as specified and directed by Engineer- in-charge..

Supply only LED Flood light fittings 100 watt with 110 lm/ watt system lumen output . The luminaire should have cool white coloure temperature with minimum 5700K . The luminaire housing should be made of pressure die cast aluminium Epoxy power coated with wether proof gasket for LEDs and control gear compartments, heat resistance toughened clear glass fixed with SS screw with IP 66 protection, lumen efficiency of 120 lumen /W, isolated electronic LED driver ( SMPS based constant current supply), IK-07, life class of 50,000 hrs @ L 70, surge voltage protection not less than 10 KV Make Crompton CAT No CFS-504-100-57-60D-SL-GL-NSG or equivalent in Havells/ Philips.complete all as specified and directed by Engineer- in-charge.

Supply, Installation, Testing and commissioning of 120  W LED Flood Light  for Epoxy powder coated die-cast aluminium housing (ADC 12) with aesthetically designed heat sink for efficient thermal management, sturdiness & excellent corrosion resistant. M16 size gland is used for cable entry and provision for loopin-loopout, System wattage consist of  120 W with composite Wide Beam PC Lens cover to ensure better uniformity Powered by an Isolated integral IP 66 Potted electronic driver with 4 KV Surge Protection (SMPS based constant current supply) with lower THD, Output Short Circuit, Over Voltage, Surge Protection. CCT 5700 - 6500 K /3000K, CRI 70, THD 10%, PF .95, IP65, IK07 .Life class of 50,000 hrs @ L70, Operating Temperature :-10 TO + 45 DEG.C TEST REPORT TO BE SUBMITTED; Test Report LM 79 FOR Complete LED Luminaries and LM 80 for LED Chip as well as PHOTO BIOLOGICAL SAFETY for LD chip. LED fixture with BIS R mark and R Registration no. must for each Fixture. As per Crompton Cat Ref: CFS-504-120-57-60D-HL2-GL-NSG (120 lm/w 10KV SPD ) with 5 Year warranty or equivalent in Havells/phillips.

Supply,fix and install in replacement of 0.75 meter Height,ID 90 mm straight translucent cylindrical pole glass fibre reinforced with 20-30 W LED light polymer matrix(GFRP) combination of fibre glass and resin making strong helipole having a highest technology has filament winding by using CNC method ,glass content of 65 to 70% specific gravity 1.42 g/CC,dielectric strength 40 KV/mm,tensile strength of 225 Mpa water absorption 0.3% flexible strength 269 Mpa,izod impact strength 80 k/Jm3 barcol hardness of 45 BHU,Tensile module of 9000 Mpa.Surface resistivity of 1.6 x 1016 ohm,tensile module of elsticity 22918 N/mm2 complete including shock-proof maintenance free .Non conductive light weight wind speed sustainability is 150 KM/H base plate is made up in GFRP material with customized logo incorporation & colour of pole as specified by Eng-In-Charge.(Rates for RCC foundation,reinforcement,excavation ,earthwork in any type of strata 0.75 meter pole foundation base plate ,foundation bolt,nuts one meter arm etc are deemed to be included in the rate quoted by the contractor,complete all as specified & as directed by Eng-In-Charge.

Supply & Fix in repairs 20 Watt LED recessed panel, STAR LORD, with IN-BUILT surge protection of upto 3KV, extra bright lumen efficacy OF 100 Lumen/Watt CAT REF : LSDRLORD-20W-CDL MAKE : CROMPTON or equivalent in Philips/Havells

S & F in repair PVC perplex cover globe type with base plate/holder not less than 8 inches dia including post top latern pipe Black colour of Hight 1.5 mtr including one Nos 7/9 watt LED lamp including surface excavation for post top latren pipe complete, including 1;3;6) type- I C-1 cemecnt concrete using 20 mm graded stone aggregate complete all as specified and directed by Engr-In-Charge make Bajaj/Surya/Havells.

Supply & fix in repair 06 WATT LED surface panel, STAR STULUS, with IN-BUILT surge protection of upto 2.5KV, easy to fit with twist and lock method CAT REF : LSDRSTYL-6W-CDL MAKE : CROMPTON or equivalent in Philips/Havells

Supply & fix in repair 36 Watt Decorative suspended ROUND fittiing LUNAR,Timeless classic design CAT REF : LCSUR4-36 MAKE : CROMTON or equivalent in Philips/Havells

Taking down exisiting timer switch and replace old unserviceable main switch , testing commissioning change timer switch, MCB /TPN, contactor with accessories and connecting cable with proper lugs, glands etc.(a) Digital Timer switch AlphaRex D22, 2 channels as per exisiting and complete testing and serviceable Legrand /Havells/Bajaj all as directed by Engr-in-Charge

Taking down old /unserviceable solar street light fiting from existing LT pole(6 meter height) , opening the fittings and checking all connection and repair the same by replacement of foll0wing part for proper functiong (a). AIO Charge controller for 18 W (b). AIO PIR sensor for 18 W, (c). AIO Li-Ion Battery as per sample. As per existing make installed at site (d) check mono crystaline panel if it is not serviceable change solar panel/ lithium ferro phospate (LifeP0 4) , with colour complete refixing at existing locations or as directed by Eng. in charge, connecting with soldering source and testing for proper functioning of the solar fittings complete as directed. Note : Rate are deemed to be included with require material for making solar light serviceable ,complete all as specified & as directed by Eng-In-Charge.

S & F PVC Insulated and weather proof three core multistrand conductor cable 3 core x1.5 sqmm, size as required length for replacing US cable for street light where ever founf US from junction bos to street light Make Havells, polycab, Gloster and KEI,complete all as specified & as directed by Eng-In-Charge.

All as per item No above but for LT XLPE cross sectional area 10 Sqmm 2.0 Core including all as specified and directed,complete all as specified & as directed by Eng-In-Charge.

Supply & fix in repair/replacement of decorative Turin LED Bollard 10 watts 230 volts, 50 HZ in IP 66, vertical in sothing opal/ prismatic finish made up of polycarbonate, suitable for 10 watt LED, all accessories prewired Havells to Cat pt TURINBLS10WLED857PSYMTOPC or as per exisiting ,complete all as specified & as directed by Eng-In-Charge.

Supply & fix in repair/replacement of decorative LIARA LED Bollard IP65 rated Inverted Pyramid Tripod type LED Bollard with soft 360º light distribution Crompton Cat pt LBLSN-10-CDL or as require site ,complete all as specified & as directed by Eng-In-Charge.

Supply & fix in repair/replacement of decorative HERITAGE IP65 rated LED post top ideal to light up parks, gardens and heritage sites Crompton Cat pt LPTH-20-CDL or as require site ,complete all as specified & as directed by Eng-In-Charge.

M&L for repairing gate motor of size 2 to 3 HP remove motor form it original position and opening motor checking bearing, taking out burn winding, rewinding motor change PLC card , contactor as per existing quantity and require connection cable etc, testing complete serviceable all as directed by Engr-in-Charge

M&L for repair maintenance of existing high mast light gear assembly, taking out drive/driven gear part, steel wire rope of existing complete servicing with greasing, oiling and refitting with it original position with serviceable gear Up and down complete all specified and directed

Taking Out motor from SMQ /OMQ area high mast gear assembly or any other location of capacity 3 to 5 HP motor after disconnecting all electric connections. re-winding of the motor with approved quality insulated water proof copper wire of same gauge same number of turns and same numbers of poles complete with Varnishing of re-wounded coils with insulated and packing materials, and tapping of coils, and heating in oven at desired temperature, replacement of existing bearing reconnect all the connections of starter/switch and testing complete and place the motor in same location after repair complete serviceable all as directed by Engr-in-Charge.

Supply and fix digital Time digital switch with built in outdoor compatible Sheet metal enclosure for street light 32A to accommodate 3 pole 4 wire system , Make- Indo asian Cat No :TL 032DB0 or equivalent of Havells/ L&T,complete all as specified & as directed by Eng-In-Charge.

M&L wiring for circuit/ sub main wiring of 2x1.5 Sqmm+1x1.5 Sqmm earth wire, alongwith earth wire PVC (FRLS) insulated multi-stranded copper conductor, single core, 1100 v grade cable on bldg / hanger truss/pole up to 15m height including in Steel conduit 15mm dia light grade clamping it with the poles with suitable GI flat & nuts/Bolts & washer,complete all as directed by Engr -in- Charge. Note:- Cutting & making good of chasis in the wall/Roof/Floor is deemed to be inclued in the quoted rates,complete all as specified & as directed by Eng-In-Charge.

Supply and fix in repair street light bracket 32/40 mm bore GI pipe/tubing light grade not less than 1.2 Mtr long bend by putting sand inside it to 45 degree angle shape with 2 nos MS clamps flat iron 50 x 5 mm for nuts, bolts and washers suitable for Steel/PCC Pole etc and applying two coats of aluminium paint over a coat of red oxide primer complete all as specified and directed. Make- Prakesh surya/Swastik/Jindal,complete all as specified & as directed by Eng-In-Charge.

Supply & fix in repair Electric water heater,storage type with Glass line coated verticle inner tank(with 7 yrs warranty) and heating element upto 2 KW of capacity 25 litre suitable to withstand 8 bar pressure , BEE 5 Star rated,compact cube shape design for smaller bathrooms & weather proof IPX4 steel body, complete with all mounting accessories & safety valve, thermostate,NRV, connection piece etc. Make:(Jaquar Elena Prime verticle EPM-WHT-V025/Usha Aquera /Racold OMNIS R 3180848)

Material & labour for marking elecptical shape on the steel tubular/PCC pole in black colour and marking the pole number using suitable tensils with synthetic enamel paint in white colour in the suitable size font so that it can be visible from 7 meter away,complete all as specified & as directed by Eng-In-Charge.