Military Engineer Services Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date31 Jan 2025
Closing Date20 Feb 2025
Tender Amount₹ 49,50,000
Costs
EMD
₹ 99,000Document Cost
₹ 500Tender Fee
Refer Documents
Summary
Special Repairs To Bldg No P-36, P-37a, P-38 And Provision Of 04 X Toilets And 12 X Urinals At Btr, Acc And S Under Ge (n) Ahilyanagar
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_695919_1Tender No
8944/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M & L moorum filling in floors or paving laid in layers n.exc. 15 cm thick spread leveled and rammed including watering complete all as specified and directed
12.8
-
-
... More
M & L hard core of gauge etc. 63 mm but n. exc. 100 mm deposited spread and leveled in layers n. exc. 15cm thick water and rammed etc. Complete all as specified and directed.
5.5
-
-
... More
M&L for providing 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as directed.
752
-
-
... More
M&L for Non-skid colored ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.
21
-
-
... More
M&L for coloured glazed ceramic tiles digitally printed 300x450mm , 7-8 mm thick as approved by GE as in dado / skirting or on vertical surfaces, over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.
239
-
-
... More
M&L for non - skid ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors. laid over and including screed bed 15 mm thick in cement and sand mortar (1:6 ) set and jointed in neat cement slurry and pointed in white or coloured cement to match,etc complete all as specified and as directed
381
-
-
... More
--ditto-- all as per Ser item No 9 but as in dado/skirting on vertical surfaces over and including 10 mm thick backing coat in CM (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed.
10
-
-
... More
M&L for 30-40mm thick rough dressed Shahabad stone as in floor/plinth etc over and incl 15mm thick screed bed in CM 1:6 complete all as specified and directed
110
-
-
... More
M&L for 60 mm thick, PCC pavers interlocking tiles of glossy finish, with grey cement and no pigment ,any shape & size conforming to IS 15658 of 2006. M-35 grade made up with 12.5mm graded mechanically crushed stone aggregates, factory made over and incl 30mm thick sand cushioning and joints filled with fine sand incl leveled with plate vibrator & sweeping etc complete all as specified and directed.
55
-
-
... More
M&L for joint free /rectified anti skid ceramic coloured tiles 7-8mm thick matching to dado tiles area of each tile 400x400mm , as in floor etc laid over and including screed bed 15 mm thick in cement mortar 1:6 set and jointed with white or coloured cement to match complete all as specified and as directed.
40
-
-
... More
M&L for machine cut kota stone slab flooring 20-25mm thick over 20 mm thick screed base in cement and sand (1:6) mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge
130
-
-
... More
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar including 15 mm thick backing coat in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge
10
-
-
... More
M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15mm thick Screed bed etc complete all as specified and directed by Engineer-in-Charge
20
-
-
... More
M&L for Machine cut cudappah stone slab 20-25mm thick over and including 15mm thick cement and sand screed in CM (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge
15
-
-
... More
M&L for 50mm thick Cement Concrete 1:3:6, type C-2 ( Using 40 mm Graded Stone Aggre-gate) as in plinth protection, laid in alternate bays , finished Concrete Surfaces Even and Smooth without using Extra Cement, expansion joint filled with 85/25 bitumen & saw dust as complete as specified and directed.
12
-
-
... More
M&L for 75mm thick plain cement concrete type C-1 (1:3:6) using 20 mm graded stone aggregate as in plinth protections & path, complete all as specified
15
-
-
... More
Demolition of brickwork or stone bouilder masonary built in cement mortar or lime mortar complete all as specified
5.58
-
-
... More
M&L for old size brickwork with fly ash bricks straight or curved on plan exc 6m mean radius,built in CM 1: 6 complete all as specified
24.16
-
-
... More
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls, built in 1: 6 complete all as specified
5
-
-
... More
Taking down cement mortar plaster on brick or stone walls, raking out joints, hacking for key complete all as directed
418
-
-
... More
M&L for rendering, 10 mm thick on brick / concrete surfaces in cement mortar 1:6 surfaces finished even and smooth without using extra cement including sagol finished complete all as specified.
305
-
-
... More
M&L for rendering, 15 mm thick on stone/brick / concrete surfaces in cement mortar 1:4 finished even and fair without using extra cement complete all as specified and directed.
235
-
-
... More
M&L for rendering 15mm thick in CM 1:4 with water proofing compound (water proofing compound shall be used as per manufacturers instructions) over brick or concrete surfaces finished even and fair.
70
-
-
... More
M & L for preparing old plastered surfaces of walls and apply two coat of OBD, finished with roller finish on plastered surfaces of wall any height including scaffholding etc complete all as specified and directed
230
-
-
... More
M & L for preparation of newly plastered surface of wall and apply two coats of OBD over a coat of primer any height including scaffholding etc complete all as directed.
190
-
-
... More
M & L for preparing old plastered surfaces of walls and apply one coat of OBD, finished with roller finish on plastered surfaces of wall any height including scaffholding etc complete all as specified and directed
310
-
-
... More
M & L for preparation of newly plastered surface of wall and apply three coats of white wash any height including scaffholding etc complete all as directed.
115
-
-
... More
M&L for preparation of old plastered or unplastered surfaces of walls including cornices etc by brooming down or steel wire brushing scraping down smook soot, moulds, moss and efflorescent salt, trading oil and greasy spots and applying one coat of white lime wash at any height including scaffholding etc complete all as specified and directed by Engineer-in-charge.
135
-
-
... More
M & L for preparation of new plastered surfaces of wall and applying two coats for cement based paint overv a coat of alkali resistant priming paint any height including scaffholding etc complete all as directed.
235
-
-
... More
M & L for preparation of old plastered surface of wall and applying one coats of cement base paint any height including scaffholding etc complete all as directed.
500
-
-
... More
M&L for 1 mm thick wall care putty etc complete all as specified and directed
325
-
-
... More
M&L for 2 mm thick wall care putty etc complete all as specified and directed
405
-
-
... More
Taking up or down 15 mm bore steel tubing and connections
20
-
-
... More
--Ditto-- all as per Ser item No 38 above but 20 mm bore tubing
10
-
-
... More
---Ditto-- all as per Ser item No 38 above but 25 mm bore tubing
10
-
-
... More
Supplying and laying 16 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including all fittings complete all as specified.
30
-
-
... More
Ditto all as per Ser item No 41 above but 20 mm bore tubing
15
-
-
... More
Ditto all as per Ser item No 41 above but 25 mm bore tubing
15
-
-
... More
S&F in repairs stop cock/ angle cock cast copper alloy, Chromium plated fancy type screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore etc complete all as specified and directed by Engineer-in-Charge
2
-
-
... More
Supply and fixing in repairs tubular towel rail, brass chromium plated 20 mm dia `D' type, 60 cm long between flanges including a pair of brackets all as directed.
2
-
-
... More
S&F in repairs fancy type bib tap, 15 mm dia, CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge.
11
-
-
... More
S & F in repairs PVC flexible 32 mm Waste pipe for WHB, Sink etc complete all as specified.
2
-
-
... More
M&L for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement
3
-
-
... More
S&F in repair PVC (SWR) 110mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in trenches/floor etc complete all as specifed and directed.
7
-
-
... More
.-Ditto- as per Ser item No 49 above but as in trenches or floor
3
-
-
... More
S&F in repair PVC (SWR) 75mm bore (dia) soil, waste and vent Pipe, (ISI Marked), in any length with rubber ring Joints fixed to wall with necessary stay clamps/ laid in trenches/floor etc complete all as specifed and directed.
4.5
-
-
... More
.-Ditto- as per Ser item No 51 above but as in trenches or floor
2
-
-
... More
S&F PVC (SWR) 110 mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed
6
-
-
... More
S&F PVC (SWR) 75mm bore (dia), Bends any type, etc. and Jointing with Solvent Cement, complete all as specified and as directed
4
-
-
... More
S&F PVC (SWR) junction single, (Single T) equal or un equal 110mm bore
1
-
-
... More
S&F PVC (SWR) junction single, (Single T) equal or un equal 75mm bore
1
-
-
... More
S&F bands, straps, supports or stays for rain waterpipes, hooks (stay) heavy for large gates, hook and pintle hinges clamps, hold fasts wall ties, hooks for hanging fans and similar small articles Fe-290 Gde- E-165 or Fe-310-0 complete all as specifed and directed.
0.5
-
-
... More
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 1000 litres capacity, triple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe, tank nipple and connected complete all as directed.
1
-
-
... More
S&F rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 500 litres capacity, triple layered, hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe, tank nipple and connected complete all as directed.
1
-
-
... More
Cutting chases in brick/ block wall, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exc 10 cm girth
20
-
-
... More
Taking down chowkhats or frames not exc. 1.5 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge
10
-
-
... More
Taking down chowkhats or frames exc. 1.5 sq. m and n exc 4.00 Sqm each with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge
7
-
-
... More
Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each etc complete all as specified and directed by Engineer-in-Charge
3
-
-
... More
S & F Pressed steel door frame of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hings, lock strike plate, etc, complete all as specified,
25
-
-
... More
S & F pressed steel door frame of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified,
15
-
-
... More
S&F for factory made 35 mm thick IInd C/L H/W glazed & skeleton shutters open rebated and prepared to receive glass gauge, divided into square or rectangles with plain chamfered or rounded mitered & rebated slash bars including beads mitered for securing glass wire gauge etc all as specified
10.6
-
-
... More
M&L for factory made 35 mm thick IInd C/L H/W plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
12.8
-
-
... More
S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides
4.5
-
-
... More
M&L for 0.9 mm thick decorative laminate type 1 on Flush door surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions
9
-
-
... More
S&F powder coated aluminium anodised aluminium frame, shutters for door,windows, ventilators with one or more rebates including joining cleat for fixing etc, rubber / neoprene beading and locking arrangement etc complete all as specified and directed by Engr-in-Charge
7
-
-
... More
M & L for Powder coated aluminium (minimum thickness of powder coating 50 micron) for Frames/shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. (Aluminium section shall be of make Jindal/Hindalco/ Indalco). Note:- Weight of Aluminium sections for frames and shutters shall only be considered for measurement for payment. However cost of other consumables given in the items shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle board and aluminium wire mesh as applicable will be measured and paid separately as supplied only.
20
-
-
... More
S&F anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws etc. complete all as specified
2
-
-
... More
Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded
15.6
-
-
... More
S&F butt hinges medium weight cold rolled mils steel 100mm long.
39
-
-
... More
S&F aluminium anodised barrel tower bolts of extruded section 150mm long.
26
-
-
... More
S&F aluminium anodised handle of extruded section 150mm long.
28
-
-
... More
S&F aluminium alloy, anodised, sliding door bolt with hasp, staple and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy 300mm long.
9
-
-
... More
S&F 300 mm mild steel ordinary rat tail rod pattern door spring including roller and roller plate complete all as specified and directed.
4
-
-
... More
S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed in any position any type of opening with and including wooden beads complete all as directed by Engr-in-Charge.
32
-
-
... More
S & F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40 mm and fixed in any position any type of opening with and including wooden beads complete all as directed by Engr-in-Charge.
20
-
-
... More
S&F 140mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.
5
-
-
... More
S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring.
5
-
-
... More
Hacking out old broken glass (any thickness size ,quality or description ) from wooden/Steel frames glazed with putty or fixed with beads.
3
-
-
... More
M & L for 3 mm thick sheet frosted/pin headed glass ordinary quality and glazing with oil putty or wooden beads in squares n.exc 0.50 sqm in each pane.
14.52
-
-
... More
M & L for 4 mm thick plain sheet glass ordinary quality and glazing with oil putty or wooden beads in squares exc 0.50 sqm in each pane.
6.8
-
-
... More
M & L for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed.
46.88
-
-
... More
M & L for preparation of old wooden surface and applying one coat of synthetic enamel paint.
30
-
-
... More
Dismantling of unframed work timber scantling 40 Sq, Cm and over in section, in any position
0.81
-
-
... More
Dismantling of unframed work fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section
220
-
-
... More
M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc. etc complete all as directed
601.6
-
-
... More
M&L for pre- painted galvalume aluminum zinc coating GI based plain steel sheet of any colour 0.50mm thick (total coated thickness), 550 Mpa minimum, yield strength. It shall be coated with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified and shall be fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers shall be provided wherever required to close voids between sheets, sheet & fasteners etc. etc complete all as directed
21
-
-
... More
S&F for false ceiling with Vinyl faced Arm-Gyp-FB, ceiling 600 x 600 x 9mm thick with washable metalized polyester foil backing with Vinyl covered edges, supporting sections shall be of suitable size from same makes embossed on sections and level adjuster duly suspended by 2 mm dia GI wire fixed to roof at 600mm centre to centre as per manufacturer's instructions / specification and all as directed including taking down/ out existing.
400
-
-
... More
S&F of Steel work in tubular trusses, Perlin, rafhter, including special shaped washer etc. complete conforming to I. S.1161-1979 grade St.-240
1640
-
-
... More
S&F of steel work in post, Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. as per Fe 410 -W (Gde- E- 250) quality- A
940
-
-
... More
M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide.
76
-
-
... More
M&L for preparation of old steel surface and applying one coat of synthetic enamel paint.
21.5
-
-
... More
M&L for PCC Type C-1 1:3:6 using 20 mm graded aggregates as in edges of floor tiles/blocks roof kerbs or mud stops, rounded or chamfered on edges etc complete all as specified and directed by Engineer-in-Charge.
0.5
-
-
... More
S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mmetc complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
S & F in repairs looking mirror of size 600 mm x 450 mm etc complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
S&F curtain rod 25mm dia, having corrugated PVC extrusion on eletric resistance welded MS pipe with fancy type 02 nos Knobs and 02 Nos brackets per each door/ windows etc complete all as specified and directed
42
-
-
... More
M&L for full moulding/half moulding of stone slabs one edge, two edge, as in steps cooking platforms jambs and cills and other similar situations complete all as specified & directed.
22
-
-
... More
Supply only 4.0mm thick Sheet glass ordinary quality and glazing with oil putty in Square exc 0.5sqm in each pane
6.8
-
-
... More
Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/ loose soil complte all as specified.
48
-
-
... More
Excavating in trenches not exc 1.5 mtr wide and depth exc 1.5 mtr but n.exc 1.5 m in depth, and getting out in soft/ loose soil.
21
-
-
... More
Returning filling including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm in soft/loose soil .
9.5
-
-
... More
Removing excavated soil n.exc. 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point in soil.
14.1
-
-
... More
M&L for PCC (1:4:8) type D2 with 40 mm graded aggregate as in mass concrete.
3.5
-
-
... More
M&L for Reinforced cement concrete M25 (design mix) in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified.
1.7
-
-
... More
M&L for Reinforced cement concrete M25 (design mix) in Beams, cantilevers, bressumers, lintels over 1.5m span, complete all as specified.
0.45
-
-
... More
M&L for Reinforced cement concrete M25 (design mix) in Chajjas, complete all as specified.
0.4
-
-
... More
M&L for CRS TMT FE 500D bars 10mm dia and over as in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips
413
-
-
... More
M&L for CRS TMT FE 500D bars 5mm dia and over upto and incl 10mm dia in stirrups, spacers, and binders in reinforcement cut to length, bent to shape required including cranking hooking ends and binding with mild steel wire.
70
-
-
... More
Use & waste formwork to sides of concrete foundations, footings,bases of columns,raft beam plinth beam flat rough finished surfaces of concrete etc complete all as specified and directed
25
-
-
... More
Use & waste formwork to sides and soffits of floor beam,roof beam,cantilevers, lintel shelves and similar work flat rough finished surfaces of concrete
9
-
-
... More
Use & waste formwork to chullah hoods, chajjas,troughs similar items including edges flat rough finished surfaces of concrete.
6
-
-
... More
M&L for Rolled steel sections as in main and cross beams, hip and jack rafters, purlins, wind ties where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates in Fe 410-W (GdeE- 250) completely all as specified and as directed by Engineer in Charge.
105
-
-
... More
S&F structural rolled mild steel Fe 410-00 (Gde E-250) Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
260
-
-
... More
Supply only integral water proofing compound.
20.4
-
-
... More
S&F Solid PVC Door frame size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing
18
-
-
... More
S&F factory made solid PVC moulded Door shutter with particle board core, 28 to 30mm thick (stiles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back space, supplying and fixing in frame at site as per specification & drawing.
5.6
-
-
... More
S&F MS flot iron as in hold fast and similar work as specified Fe-290 Gde- E-165
0.5
-
-
... More
S&F stainless steel butt hinges 100mm size
15
-
-
... More
S&F 100mm long extruded aluminium alloy handles, fabricated type, anodised.
8
-
-
... More
S&F 100mm long aluminium anodised barrel tower bolts of extruded section.
10
-
-
... More
S&F wash hand basin vitreous China white , flat back or angle type of size 500 X 400 mm including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc complete all as specified and directed by Engineer-in-Charge
1
-
-
... More
S&F 40mm bore low density polythene pipes (HDPE) of pressure rating 6 Kg / cm2 fixed complete to walls, ceiling or in floors etc.
9
-
-
... More
Supply only 10 Ltrs. Capacity PVC valveless,syphonic action type, flusing cistern low level,white,with inlet,ball valve,float and handle including brackets complete all as specified and directed.
4
-
-
... More
S&F vitreous China squatting pan, 'orrisa' pattern wc of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe but including 'P' or 'S' trap and provision of lime concrete bedding in repairs.
4
-
-
... More
S&F Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) including 32mm high density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches
12
-
-
... More
S & F in repairs PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.
23
-
-
... More
S&F 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed etc complete all as specified and directed by Engineer-in-Charge
17
-
-
... More
S&F 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.
1
-
-
... More
M&L for PCC (1:3:6) type C2 (using 40 mm graded stone aggregate) in bed to 150 mm dia drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested.
6
-
-
... More
M&L 150 mm dia salt glazed stoneware drain grade 'A' pipes laid in trenches and jointed as specified.
6.5
-
-
... More
M&L for cutting into existing manholes for connecting new drains of 150mm bore making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round on 3/4 section) in cement concrete 1:2:4 tye B-1 smooth finished and retorming benching as required.
1
-
-
... More
Supply and fixing precast Hume Pipe septic tank of capacity 50 users including necessary excavation and earthwork in any type of strata etc complete all as specified and directed by Engineer-in-Charge Note : (i) Septic tank shall be kept minimum 15 cm below GL and shall be laid according to slope of sewage line.
(ii) Make and material shall be as approved by GE.
1
-
-
... More
Taking down carefully copper/aluminum point wiring (light/fan/bell/socket, power point etc) complete , including fixture and fitting such as switches, ceilling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good disturbed surfases of walls, floors etc complete all as specified and directed Engineer-in-Chage.
67
-
-
... More
M&L for point wiring complete on surface of wall (open) type with two runs of 1.5 sq mm for phase and neutral single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable drawn in and incl PVC Casing and capping ISI Marked with its accessories with provn of PVC boxes and fixed with brass screws cup washer for fixing switches/socket/regulators etc incl 1.5 sq mm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLSH cable as earth continuity conductor to common earth & connecting to earth dolly for the following, all as specified and directed. Note :
1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black) 2. All points are required to earthed upto fixtures i.e. Holders, Tube lights, Wall lights, bulkhead lights, bldg security light etc
-
-
-
... More
One light point /fan point controlled by switch 5 Amp single pole one way
53
-
-
... More
One 3 pin 5 Amp socket outlet on same board controlled by one, one way 5 Amp switch
8
-
-
... More
One socket outlet 5/3 pin 5 Amp controlled by one switch on independent board
3
-
-
... More
All as per Item No 138 (here-in-before) but with 2.5 Sqmm Copper conductor cable for Phase , Neutral and Earth for one 3 pin, 15 Amp socket outlet on independent board
3
-
-
... More
S&F switch piano flush type single pole, one way 5/6 Amp etc complete all as specified and directed by Engineer-in-Charge
56
-
-
... More
S&F switch piano flush type single pole, one way 16 Amp etc complete all as specified and directed by Engineer-in-Charge
3
-
-
... More
S&F Socket 3 pin 6 Amp etc complete all as specified and directed by Engineer-in-Charge
14
-
-
... More
S&F Socket 2 in 1, 6/16 Amp etc complete all as specified and directed by Engineer-in-Charge
3
-
-
... More
S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as required etc complete all as specified and directed by Engineer-in-Charge.
5
-
-
... More
Supply & fixing lamp holder (Angular/Straight ), insulated body, with back plate for batten fitting etc complete all as specified and directed by Engineer-in-Charge
16
-
-
... More
M&L ceiling rose 3 terminal / PVC / polycarbonate, isolated body etc complete all as specified and directed by Engineer-in-Charge
33
-
-
... More
S & F in replacement double door Sheet metal enclosures factory made Vertical DBs Concealed in Wall 4 way TPN, 415 volts ,protection class IP-42, including 100 Amps MCCBs suitable for fixing of MCBs, etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.
1
-
-
... More
S & F in replacement double door Sheet metal enclosures factory made DBs SPN, 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs,, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed.
4
-
-
... More
S & F in replacement double door Sheet metal enclosures factory made DBs 4 way SPN, 240 volts ,protection class IP-42, suitable for fixing of MCBs, etc, Concealed in wall confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 10 or equivalent in Simens/ Hager/ L&T
1
-
-
... More
Supply & fixing MCB , SP, AC, 240 Volts of 06 to 40 Amp capacity 10KA, 'B' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge.
36
-
-
... More
Supply & fixing MCBs, SPN, AC, 240 volts of 40 Amps capacity 16 KA, 'C' series and making connections with suitable size of copper lugs etc complete all as specified and directed by Engineer-in-Charge
5
-
-
... More
Supply and fix square profile LED lighting fixture , environmental friendly, energy efficient ready to use pack Aluminium housing LED Tube light fitiing 22 Watt with LED light source 6500 K,input voltage 140V-270V with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge
28
-
-
... More
S&F sub main wiring with two single core PVC insulated,unsheathed, FRLSH stranded copper conductor cable 4 Sqmm with 4 Sqmm PVC insulated, unsheathed, FRLSH stranded copper conductor cable as earth wire drawn through and including PVC Casing and capping ISI Marked with its all necessary accessories and earth wire connected to common earth dolly etc complete all as specified and directed by Engineer-in-Charge .
Note :
1. Proper colour coding shall be adopted for wiring (For Phase- Red, Yellow, Blue, For Earth - Green and For Neutral- Black)
2. Two run of 4 Sqmm cable i.e for one run for phase, one run for neutral with one run of 4 Sqmm cable for earth and one run of PVC Casing & caping shall be measured as one unit
90
-
-
... More
S& F Industrial switch socket 20 amps MCb includes all as specified and directed
6
-
-
... More
M&L for earthing complete with galvanised steel earth plate electrode 600x600x6mm thick burried directly in ground. Earth pit not less than 2.25 m depth and top edge of the earth plate not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nuts, bolts & washer etc. Earth wire connected upto main earth point / DBs alongwith 15mm dia earth protection pipe from top edge of the earth plate to main earth point to be connected and 20mm dia watering pipe light grade with funnel and provn of PCC using cement concrete (1:2:4) mix type B1 using granded stone aggregate and RCC pit cover 50 mm thick precost RCC (1:2:4) mix type B1 duly reinforced with 8 mm dia of TMT bar @ 100 mm CIC, both way, lifting arrangement complete including all necessary earth work etc complete all as specified and directed by Engineer-in-Charge
2
-
-
... More
Supply and fix ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 20 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with and including 2 core sheathed copper conductor cable of size 0.5 Sqmm with complete with all accessories etc complete all as specified and directed by Engineer-in-Charge .
4
-
-
... More
S&F ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack LED Tube light fitiing 2 feet 10 Watt with LED light source 6500 K with uniform light output, with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 Sqmm with etc complete all as specified and directed by Engineer-in-Charge.
2
-
-
... More
Supply & fix in replacement energy saving and environmental friendly long life LED street light 30 Watt (Bldg security light) made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK07 fixed on wall with GI pipe of suitable dia and all fixing accessories including connecting up with & including twin core twisted flexible copper conductor cable of suitable size of 230V , 50 HZ etc complete all as specified and directed by Engineer-in-Charge
4
-
-
... More
Supply and fix exhaust fan,Steel body AC Single phase,230 V of size 300 mm sweep with ,blades frame and louvers etc complete all as specified and directed by Engineer-in-Charge
4
-
-
... More
M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :- (a) LT cable 10 Sqmm, 2 core. Note : (Excavation, Earthwork & protection pipe etc shall be measured and paid seperately under the relevent item of this Schedule)
80
-
-
... More
Excavation in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth and getting out in hard/dense soil etc complete all as specified and directed by Engineer-in-Charge
26
-
-
... More
Supply & lay HDPE DWC pipe 63 mm bore for laying of LT cable complete with all accessores etc complete all as specified and directed by Engineer-in-Charge
35
-
-
... More
Cutting to existing CI/GI pipe line upto 80 /50/25 mm dia for taking connection up to 25 mm dia GI pipe including insertion of CI /GI Tee complete all as specified and directed including Exc & earth Work
2
-
-
... More
Supply and lay in trenches/or on wall medium grade steel water tubing galvanised with all fittings and joints etc complete for following size :-
(a) 20 mm bore
50
-
-
... More
S&F 20 mm Ball brass valves,high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed
2
-
-
... More
Supply and fix gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for for 20 mm bore.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%