Military Engineer Services Tender

Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point.

Supply & spreading in trenches sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly.

Providing and laying 100 mm thick factory made cement concrete interlocking paver block of M50 grade conforming to IS 15658-2006 made by block making machine with strong vibratory compaction, of approved size, design & shape, with gray cement and pigment of approved colour, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Supply & laying unreinforced precast concrete cable cover class LV type 1, flat shape, dimension 250 mm X 150 mm X 40 mm as per IS 5820: 1970 complete all as specified and directed.

M & L for cutting of existing flooring / plinth protection/ road 450mm depth for laying of pipe/cables and making good disturbed surface with existing surface i.e. Bituminious toppings complete all as specified.

M & L for cement concrete in foundation, filling and mass concrete in PCC 1:2:4 type B2 using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.

Supply and lay high density polyethylene pipe (HDPE) of pressure rating PN 6(0.6 Mpa), material grade PE 63 and nominal dia 15 mm including all fittings and fixtures in trenches complete all as specified and as directed.

Supply, installation, commissioning and testing factory made, CPRI approved, outdoor type LT panel board of adequate size, made of mild steel sheet of 3.15 mm thick, powder coated, dust & vermin proof, front and rear openable, double doors, compartmentalized, general construction confirming to IS: 8623 (Part 1): 1993, cubical type locking arrangements, internally wires with FRLS, PVC insulated stranded copper conductor cable 10 Sqmm including LED indicator for R, Y & Band fixing plate quipped with rail for MCCB TPN , including mounting on angle iron frame made using angle iron 75 mm X 50 mm X 6 mm complete all as specified and as directed and shall be comprising the followings: - (a) MCCB rated current(In):400 A, TPN, 35 kA, 415V, C series- 1 No (b) Digital voltmeter with built in selector switch, rating 0 to 500 V: 1 No. (c) Digital ammeter with built in selector switch and CT, rating 0 -600 Amp: 1 No. (d) LED Indication lamp (RYB): 01 set of 3 Nos

Supply and fix cable jointing kit for 1.1 KV grade cable for straight through outdoor type joint complete with Jointing material heat Shrink type and accessories suitable for 3 ½ / 4 core XLPE, armoured, Al conductor cable of size 240 to 400 sqmm, Outdoor type complete all as specified and directed