Military Engineer Services Tender

Taking down ceiling fan /EXHAUST FAN of any size or make and refixing the same all as specified and directed by Engr -in-Charge.

M&L Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 1.5 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade Conduit not less then 20 mm width with modular metal sunken switch with face plate for modular switch complete with brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified. OF THE FOLLOWING: Note : (1) Making good to match with the adjoining surface shall be included in the unit rate. (2) Rate is inclusive of Cutting/chases of wall/floor/ceiling

One light point controlled by one, one way switch

One light point controlled by two 2-way switches, cable 1.5 sq.mm size

One ceiling /exhaust fan point controlled by one switch and regulator

One 3 pin 5 amp socket out point on the same board with other switches.

One3 pin 5 amps socket out let point on independent board

All as per Srl Item No 5.00 above but for one socket outlet 15 Amp on independent board with 4 Sq mm cable and 2.5 Sq mm earth wire.

All as per Srl Item No 5.00 above but for one socket outlet 15 Amp on independent board with 2.5 Sq mm cable and 1.5 Sq mm earth wire.

Supply and Fix ,Ceiling rose surface bakelite two to three terminal complete all as specified and directed.

Material and labour Modular white cover plate with frame of following types complete all as specified and directed

(a) White cover plate with frame, 2 module

(b) White cover plate with frame, 3 module

(a) White cover plate with frame, 4 module

(a) White cover plate with frame, 6 module

(a) White cover plate with frame, 8 module

Material and labour Modular Metal flush box of following types complete all as specified and directed

Metal flush box,1/2 module

Metal flush box, 3 module

Metal flush box, 4 module

Metal flush box, 6 module

Metal flush box, 8 module

Material and labour Modular switch 1 way 10A, 1 module complete all as specified and directed

Material and labour Modular Socket 6A -2/3 pin combined 2 module complete all as specified and directed

Material and labour Modular Socket 6A/16A -2/3 pin combined 2 module complete all as specified and directed

Material and labour Modular switch 1 way 16A, 1 module complete all as specified and directed

Material and labour Modular Fan Step regulator, 120W-2 module complete all as specified and directed

Supply and Fix of Ceiling rose surface bakelite two to three terminal complete all as specified and directed .

Supply and Fix of Lamp holder,insulated body with back plate and LED lamp complete all as specified and directed

Supply and Fix of MCB DB SPN 8 Way double door type 415 V with bus bar complete all as specified and directed

M&L MCCB DB vertical type made of sheet steel , powder painted with neutral bus bar 200 A, neutral link, IP-30-IK08 protection grade , 415Volts TPN with 4 way Double door complete all as specified and directed,

M&L MCCB TPN 100 Amps , 415Volts, 25KA ,3 Pole complete all as specified and directed,

Supply and Fix of MCB SP 06 to 32 Amps 240 Volts complete all as specified and directed .

Supply and Fix of SPN 6- 40 Amps 240 Volts complete all as specified and directed .

Supply and Fix single pole and neutral enclosure with a two pin and earth and metal clad plug socket complete with one single pole MCB 25 Amp 240 Volts complete all as specified and directed. NOTE (1).The unit rate includes for cutting the brick walls to accommodate DB to make flush to wall./ DB tube fixed on wall including frame made out of MS flat 40x5mm(2).The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface

S &F LED tube light fittings decorative ultra slim linear fixture with extruded aluminium heat shrink environmental friendly Energy efficient ready to use pack , 20 Watt , 4 feet, surface mounting type extruded pvc, snap on installers and domestic electronic Driver ,connector block ect.with all assoceries internally prewired & includingconeecting up with 2 core flexible copper conductor cable with suitable size & suitable for and mounting clamps PVC square box 75x75mm - 2 nos etc. with 100lum/watt, CRI 70, Surge protection 4 KVA

Supply and fixing LED Light fitting Mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED Lamp including connecting up with three core flexible copper conductor cable of suitable size complete with 100lum/watt, CRI 70, Surge protection 4 KVA.

M&L for sub main wiring with three single core 10 Sqmm FR PVC insulated with one run of Neutral Black Colour and sheathed 1100 Volts grade, stranded copper conductor ISI marked drawn into fixed in an including Casing -N-Capping/conduit with all fitting and accessories and one continuous run of 6.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and directed. Note :-Five single core cables along with earth wire and Neutral and Casing -N-Capping shall be measured as one unit length

M&L for sub main wiring with two single core 6 Sqmm FR PVC insulated and sheathed 1100 Volts grade, stranded copper conductor ISI marked drawn into fixed in an including Casing -N-Capping/conduit with all fitting and accessories and one continuous run of 4.0 Sqmm copper conductor PVC insulated (green colour) as earth wire complete all as specified and directed. Note :- Two single core cables along with earth wire and Casing -N-Capping shall be measured as one unit length

Excavation in trenches n. exc. 1.5 M in width and 1.5 M in deep for laying of cable and getting out in Soft / loose soil complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc. 25 cm complete all as specified and directed.

Removing excavated material n. exc. 50 M away, depositing as directed at level n. exc. 1.5 M above starting point complete all as specified and directed .

M&L for providing crushed stone sand cushioning to UG cable including punning down of sand in layers complete all as specified and directed. Note: Punned thickness only shall be measured.

Supply and laying unreinforced precast concrete cable cover factory made embossed the mark “LT CABLE” class LV type1 flat size 250x150x40 mm laid in trenches complete all as specified and directed

Taking down GI pipe laying in trenches for UG cable protection of any sizes pipe complete all as specified and as directed.

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 50 mm with and including all fittings and accessories for cable protection complete all as specified and directed

Supply and lay in trenches / along the wall / floor pipes GI light grade of size 80 mm with and including all fittings and accessories for cable protection complete all as specified and directed

Taking down any sizes of of LT UG cable XLPE with aluminium conductor multistranded , PVC insulated and PVC sheeted heavy duty 1100 Volts grade under ground cable complete all as specified and as directed.

Supply and lay of LT UG cable XLPE with aluminium conductor multistranded 1100 volts grade in armoured, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 25 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminium conductor multistranded 1100 volts grade in armoured, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 35 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminium conductor multistranded 1100 volts grade in armoured, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 50 sq mm 3.5 Core complete all as specified and directed.

Supply and lay of LT UG cable XLPE with aluminium conductor multistranded 1100 volts grade in armoured, heavy duty electric power cables with stranded aluminium conductor, 1100 volts grade, cross-sectional area of size 70 sq mm 3.5 Core complete all as specified and directed.

Supply and fix Electric storage water heater (Geyser) 25 Ltrs capacity, 230 volts, single phase, 50 Hz, of rated power 2000 Watt, rated water pressure .8 Mpa incl all accessories including taking down unserviceable geyser from existing place & deposited into AGE E/M (AF) Mumbai store yard and making good for disturbed surfaces, including water connection arrangement with suitable Hot/Cool Pipe as per specified and directed.

Supply and fix gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe of sizes 15 mm dia complete all as specified and as directed by Engineer - in-Charge:

Supplying & Laying, connecting and testing GI pipe 15 mm bore medium grade including necessary fittings in trenches complete all as specified and directed by Engineer-in-charge.

Supplying & Laying, connecting and testing GI pipe 25 mm bore medium grade including necessary fittings in trenches complete all as specified and directed by Engineer-in-charge.

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down screwed for iron pipe or for brass ferrule

Supply and fix exhaust fan steel body,300 MM sweep, 230 volts, 50 hz, metallic grey colour with louvers complete all as specified and directed.

M&L Earthing complete with copper plate electrode 60×60cm ×3.15mm size & copper strip 20 x 3 mm brazed with copper plate buried in ground not less than 1.5 Mtrs deep with PCC chamber complete all as specified and as directed means of bolts, nuts, check nuts and washers of brass check nuts and washers of brass including necessary earth work, PCC chamber , CI cover with frame, funnel, mesh, Earth lead protection pipe, 7.5 Meter Earth Lead etc all as shown in electrical plate No 3 in SSR Part-I and connected to earth test point/LT Panel/Transformer including testing on completion all as directed by Engr in-Charge

Supply, install, testing and commissioning of factory made and CPRI tested outdoor type floor mounted on PCC Plinth. LT panel board cubicle type panel board suitable for 415 volts, 3 phase, 4 wire, 50 Hz AC supply system having bus bar chamber with air insulated PVC sleeved with heat shrink of colour code on copper bus bar of rating 350 Amps for phases and 250 Amps for neutral fixed on porcelain insulators. The panel shall be weather proof, dust and vermin proof IP-54 class protection and fabricated out of 3.0 mm CRCA sheet duly powder coated after seven tank process and pedestal of size 50 x 50 x 6 mm thick MS angle iron frame work. the panel shall be both front and back openable type adequate space all around accessories such as LT switchgear and measuring instruments on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade marked or PVC sleeved copper strips of appropriate size as per standard in practices and including comprising of followings accessories all as specified and directed. INCOMING (a) MCCB 415 Volts, 250 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 35 KA - 01 No (b)Digital volt meter 0-500 Volts-01 (c) Digital Ampere meter 0-100 Amps with and including CTs-01 No OUTGOING (a) MCCB 415 Volts, 125 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 25 KA - 02 Nos. (b) MCCB 415 Volts, 100 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 25 KA - 01 Nos. (c) Internal wiring of panel with stranded copper cable of suitable size (d) Neon phase indicating lamp(Set of three)-01 Set (e) Stencilling of panel board including marking of distributions

Supply, install, testing and commissioning of factory made and CPRI tested outdoor type floor mounted on PCC Plinth. LT panel board cubicle type panel board suitable for 415 volts, 3 phase, 4 wire, 50 Hz AC supply system having bus bar chamber with air insulated PVC sleeved with heat shrink of colour code on copper bus bar of rating 350 Amps for phases and 250 Amps for neutral fixed on porcelain insulators. The panel shall be weather proof, dust and vermin proof IP-54 class protection and fabricated out of 3.0 mm CRCA sheet duly powder coated after seven tank process and pedestal of size 50 x 50 x 6 mm thick MS angle iron frame work. the panel shall be both front and back openable type adequate space all around accessories such as LT switchgear and measuring instruments on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade marked or PVC sleeved copper strips of appropriate size as per standard in practices and including comprising of followings accessories all as specified and directed. INCOMING (a) MCCB 415 Volts, 250 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 35 KA - 01 No (b)Digital volt meter 0-500 Volts-01 (c) Digital Ampere meter 0-100 Amps with and including CTs-01 No OUTGOING (a) MCCB 415 Volts, 100 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 25 KA - 04 Nos. (b) MCCB 415 Volts, 100 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 25 KA - 01 Nos. (c)Internal wiring of panel with stranded copper cable of suitable size (d) Neon phase indicating lamp(Set of three)-01 Set (e)Stencilling of panel board including marking of distributions

Supply, install, testing in replacement and commissioning of factory made and CPRI tested outdoor type floor mounted on PCC Plinth. LT panel board cubicle type panel board suitable for 415 volts, 3 phase, 4 wire, 50 Hz AC supply system having bus bar chamber with air insulated PVC sleeved with heat shrink of colour code on copper bus bar of rating 100 Amps for phases and 100 Amps for neutral fixed on porcelain insulators. The panel shall be weather proof, dust and vermin proof IP-54 class protection and fabricated out of 3.0 mm CRCA sheet duly powder coated after seven tank process and pedestal of size 50 x 50 x 6 mm thick MS angle iron frame work. the panel shall be both front and back openable type adequate space all around accessories such as LT switchgear and measuring instruments on both sides including internal wiring in the panel with PVC insulated multi stranded copper conductor cable 1100 Volt grade IS 694 marked or PVC sleeved copper strips of appropriate size as per standard is practices and including comprising of followings accessories all as specified and directed. INCOMING (a) MCCB 415 Volts, 63 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 35 KA - 01 No (b) Digital volt meter 0-500 Volts-01 (c) Digital Ampere meter 0-100 Amps with and including CTs-01 No OUTGOING (a) MCCB 415 Volts, 32 Amp, rating 4 Pole (triple pole and neutral), (Service Breaking Capacity 25 KA - 03 Nos. (b) Internal wiring of panel with stranded copper cable of suitable size (c) Neon phase indicating lamp(Set of three)-01 Set (d) Stencilling of panel board including marking of distributions (e) Street light timer, digital type, contactor 63 A, suitable complete.

S &F Pumping sets, centrifugal, IC engine driven, supply and Install complete 15 HP with 80 mm dia suction and delivery along with Wheel mounting to suitable for shifting one place to another place of water dewatering from area as directed and specified.

Supply and fixing Suction/delivery PVC pipe suitable size 80mm dia of with clamping, nut bolt system

S&F foot Valve made suitable for 80mm dia suction pipe complete all as specified and directed.

M & L for point wiring with FRLS insulated unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade, with FRLS insulated unsheathed stranded copper conductor cable of size 1.5 sqmm 1100 volts grade for earth continuity wire, to be drawn in and in casing capping including switch/terminal box 1.2mm thick and ebonite switch board cover 3.0mm thick or PVC moulded switch board and brass screws with cup washers including all necessary casing & capping and making good disturbed surface complete all directed & specified and directed. (a) One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm

Supply and Fix of Switch piano flush type single pole one way 5 Amp complete all as specified and directed.

Supply and Fix of Ceiling rose surface bakelite two to three terminal complete all as specified and directed

S & F exhaust fan, made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of sweep 300mm all as specified and directed.

M&L Point wiring with PVC insulated unsheathed stranded copper conductor cable of size 4 Sq mm, with PVC insulated unsheathed stranded copper conductor cable of size 4 Sq mm stranded for earth continuity wire, to be drawn in and including, PVC medium grade casing capping 25 mm width with modular metal sunken switch with face plate for modular switch complete with brass screws with cup washers including all necessary wall cutting and making good disturbed surface all as directed and specified Note : (1) Making good to match with the adjoining surface shall be included in the unit rate. (2) Rate is inclusive of Cutting/chases of wall/floor/ceiling

Supply and install hi wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality of capacity 1.5 TR, copper wound unit with minimum 3 Star rating complete as per specified and directed.