Military Engineer Services Tender

Supply and fix 450mm long PVC connector with brass adaptor, washer and fixing in position complete all as specified.

Supplying and laying of CPVC pipes of outer diameter 16mm with SDR 11 & Plain CPVC SDR 11 fittings complete all as specified with UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all CPVC plain & brass threaded random fittings fixed complete to walls, ceilings or in floors etc all as directed by engr-in-charge

S & F Stop valves, dia 15mm chromium plated, fancy type, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed bothends for iron pipe or for unions and fixed complete all as specified and directed by Engineer in Charge.

S & F Bib Taps, dia 15mm, cast copper alloy, chromium plated, Fancy Type screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer in Charge.

Supply and fix 15 Amps plug top, AC 230 volts, ISI marked.

S&F Modular white cover plate with Frame 3 Module.

S&F Modular metal flush box 3 module.

S&F submain wiring having 2 single core FRLS 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including including PVC conduits of suitable size not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 4.0 sqmm (green colour) for earthing. (Note : 2 runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4.0 Sqmm cable shall be measured as 1 Run for payment purpose.)

Taking down existing LT cables/submain cable/other communication cables of any size from wall/roof at height of G+7 building disconnecting the cables from DB/LT Panel and refixing in cable tray and DB/LT Panel complete all as specified and directed by Engr in Charge. Note :- (a) Cable tray will be measured and seperately. (b) Max up to 20 run of cable shall be measured and paid as one RM.

Supply and fixing Mild Steel Galvanized Coating Cable Tray perforated type anongwith cover of size 400 mm x 50 mm x 2.0 mm for carrying of cable of any size size fixing on wall/ angle iron along with all necessary fixing accessories (bracket, nut bolts, washer, fastner) all as spcified and directed by Engineer-in-Charge.

Supply and fixing Mild Steel Galvanized Coating Cable Tray perforated type anongwith cover of size 300 mm x 50 mm x 2.0 mm for carrying of cable of any size size fixing on wall/ angle iron along with all necessary fixing accessories (bracket, nut bolts, washer, fastner) all as spcified and directed by Engineer-in-Charge.

Supply and fixing Mild Steel Galvanized Coating Cable Tray perforated type anongwith cover of size 250 mm x 50 mm x 2.0 mm for carrying of cable of any size size fixing on wall/ angle iron along with all necessary fixing accessories (bracket, nut bolts, washer, fastner) all as spcified and directed by Engineer-in-Charge.

Supply and fixing Mild Steel Galvanized Coating Cable Tray perforated type anongwith cover of size 200 mm x 50 mm x 2.0 mm for carrying of cable of any size size fixing on wall/ angle iron along with all necessary fixing accessories (bracket, nut bolts, washer, fastner) all as spcified and directed by Engineer-in-Charge.

Supply and fixing Mild Steel Galvanized Coating Cable Tray perforated type anongwith cover of size 150 mm x 50 mm x 2.0 mm for carrying of cable of any size size fixing on wall/ angle iron along with all necessary fixing accessories (bracket, nut bolts, washer, fastner) all as spcified and directed by Engineer-in-Charge.

Supply and fixing Mild Steel Galvanized Coating Cable Tray perforated type anongwith cover of size 100 mm x 50 mm x 2.0 mm for carrying of cable of any size size fixing on wall/ angle iron along with all necessary fixing accessories (bracket, nut bolts, washer, fastner) all as spcified and directed by Engineer-in-Charge.

Supply and installation of PVC DLP - On wall trunking of size 80 MM X 50 MM (with seperation) with 1.5MM thickness with all finishing accessories (flexible cover, clip of partition, base joint, internal angle, external angle, end cap, derivation, flat angle) confirming standard EN 50085-2-1. Trunking should accept wiring device with all the funcions by associating the accessory of installation. Trunking should confirm to the current specifications of NF C 68-104 in term of both performance and level of function provided by the system. Installation trunking (which carries electrical/signal/telephone wiring accessories) should be type 3 (installation) in the new stranded. Material should be non flame propagating. Degree of protection provided by enclosure should be IP 40. Protection against mechanical impact should be IK 07. Trunking should be delivered in length of 2 mtr. The trunking cover and partition should be in PVC white RAL 9003. The accessories should be in plastic ABS white RAL.

Supply and installation of PVC DLP - On wall trunking of size150 MM X 50 MM (with 2 compartment 2x 65 mm) with 1.5MM thickness with all finishing accessories (flexible cover, clip of partition, base joint, internal angle, external angle, end cap, derivation, flat angle) confirming standard EN 50085-2-1. Trunking should accept wiring device with all the funcions by associating the accessory of installation. Trunking should confirm to the current specifications of NF C 68-104 in term of both performance and level of function provided by the system. Installation trunking (which carries electrical/signal/telephone wiring accessories) should be type 3 (installation) in the new stranded. Material should be non flame propagating. Degree of protection provided by enclosure should be IP 40. Protection against mechanical impact should be IK 07. Trunking should be delivered in length of 2 mtr. The trunking cover and partition should be in PVC white RAL 9003. The accessories should be in plastic ABS white RAL.

Material & Labour for low smoke zero halogen (LS0H) flame retardant armoured type fire alarm control cable of size 1.5sqmm 2 core, conforming to BS 7629-1, BS 6387 & BS EN 50200 and rated for 500 V and having plain annealed stranded copper conductor with primary insulation of glass mica fire resistant tape and secondary insulation of high performance silicone rubber, earth/drain wire of annealed tinned copper, electrostatic screen of aluminium fire barrier and type LTS3 outer sheath conforming to BS 7655, suitable for operating temperature range -30 ˚C to +70 ˚C and minimum bending radius being 6 times the overall cable diametre, RED in colour, including laying, clamping, termination and ferruling complete all as specified and directed by the engineer-in-charge.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of 40-100amp current carrying capacity in the DB complete with connection testing and commissioning.

Supply and fix in replacement MCCB 4 Pole, 415 V, Adjustable type, 160 Amps with breaking capacity 36 KA with enclosure complete all as specified and directed.

S&F in replacement DB 4 way Double door TPN type, 415 volt having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed.

S&F in replacement DB 12 way Double door SPN type, 240 volt having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed.

S & F MCB SP 06-32 Amps, 10 KA, C curve, 240 volts rating complete all as specified and directed.

S & F MCB DP 40 Amps, 10 KA, C curve, 240 volts rating complete all as specified and directed.

S&F in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 35 sq. mm 4 core complete all as specified and directed.

S&F in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 25 sq. mm 4 core complete all as specified and directed.

S&F in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100volts grade, cross-sectional area 16 sq. mm 4 core complete all as specified and directed.