Military Engineer Services Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date15 Nov 2024
Closing Date7 Dec 2024
Tender Amount₹ 49,00,000
Costs
EMD
₹ 98,000Document Cost
₹ 500Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_684099_1Tender No
8204/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Demolition of reinforced cement concrete of any description, in any position, not otherwise specifically provided, for wall (reinforcement cut as required to facilitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge.
6.5
-
-
Repairing of excessively damaged concrete portion by using superfluid dual shrinkage compacted and providing, casting with micro concrete of grade M-40 at all levels with all leads and lift as directed including mixing, laying, levelling, finishing including curing and formwork of steel or marine ply complete all as specified and directed by Engineer-in-Charge.
Make: Fosroc / SIKA / BASF / Krishna Conchem or equivalent approved .
3
-
-
Material and Labour for reinforced cement concrete (Nominal mix) 1:2:4 using 20mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajja and in shelves etc complete all as specified and directed by Engineer-in-Charge.
2.5
-
-
Material and labour for formwork using steel shutters or 12mm marine ply to have the smooth finish to pour the micro concrete/ concrete including de-shuttering etc complete all as specified and as directed by Engineer-in-Charge.
20
-
-
Material and labour for providing and applying rust cleaner of approved make over prepared reinforcement, including removing concrete all around reinforcement including from behind the reinforcing bars by manual methods such as hammering the rebar, using wire brushes, chiseling, etc. and applying rust removing solution of approved make with cotton waste swab to reinforcements etc complete as directed by Engineer-In-Charge.
Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika
30
-
-
Material and labour for providing and applying two coats of anticorrosive epoxy phenolic rebar protective system IPNet RB of Krishna Conchem or equivalent of approved make and quality comprises of resin and hardener mixed as per manufacturer's instructions with minimum 9-10 hours between the coats, sprinkling dry sand when 2nd coat is tacky so as to provide rough finish and ensuring air curing of minimum 10 hours after the top coat before any subsequent treatment etc. including scaffolding etc complete all as specified and as directed by Engineer-in-Charge.
Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE
Note:
(a) New Reinforcement shall be measured and paid separately under respective item.
(b) Cost of welding deemed to be inclusive in this item of work.
30
-
-
Material and labour for providing and applying a priming cum bonding coat of two component Epoxide Resin conforming to ASTM-C-882-91 of approved make and quality to clean and sound concrete area by brush or any other established method for joining old and new concrete as per technical specifications of manufacturer complete all as specified and as directed by Engineer-in-Charge.
Make- Dr FIXIT/ FOSROC/ Krishna Conchem/BASF/Sika as approved by GE
Note-Work shall be carried out as per the manufacturers specifications & certificate on this account shall be taken from consultant and as approved by Engineer-in-charge Note for Item No.1 to 10:- (i) The work under Item No. 1 to 10 shall be carried out by authorised applicator only.
(ii) Defect liability for these items shall be 5 years from certified date of completion.
(iii) Amount of 5% of these items shall be retained during RAR and FB. This amount shall be released after successful completion of Defects liability period as mentioned above.
(iv) Non destructive testing shall be got carried out through IIT / NIT / College of Engineering Pune to decide fulfillment of fitness criteria of structure. (v) The test shall be carried out at each discrete location or locations decided by GE or testing authority. (vi)The cost of testing shall be deemed to be included in the rate quoted by the contractor. Completion shall be issued by GE after only getting structural stability certificate of each respective building from testing authority.
30
-
-
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge
250
-
-
Material and labour for rendering 10mm thick in C:M 1:4, including dubbing of plaster in CM 1:6 of any thickness and finishing even and smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.
100
-
-
Material and labour for rendering 5mm thick plaster in cement mortar (1:3) on concrete surfaces of ceiling and finishing the surfaces even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
50
-
-
Material and labour for rendering 15mm thick in C:M 1:4, mixed with waterproofing compound, including dubbing of plaster for in CM 1:6 of any thickness and finishing even and smooth without using extra cement using waterproofing compound complete all as specified & directed by Engineer-in-Charge. Note: waterproofing compound shall be measured separately
100
-
-
Material and labour for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints
100
-
-
Material and labour for preparation of newly plastered surfaces of ceiling and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints
50
-
-
Material and labour for new plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge.
Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India
90
-
-
Material and labour for complete removal of existing treatment of old decorated surfaces of walls and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints
60
-
-
Material and labour for complete removal of existing treatment of old decorated surfaces of ceiling and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints
40
-
-
Material and labour for complete removal of existing treatment of plastered wall surface and applying two coats of Acrylic weather proof coat 100% exterior grade paint over one coat of acrylic primer upto a height of bldg roof including formwork/scaffolding/ladders and safety belts with precautions etc complete all as specified and as directed by Engineer-in-Charge.
Make : APEX ULTIMA” of Asian Paints/ “WEATHER COAT ALL GUARD” of Berger Paints/"EXCEL TOP GUARD” of Nerolac/ “DULUX WEATHERSHIELD MAX” of ICI India
100
-
-
Material and labour for preparation of wall surfaces and applying 1.5mm thick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge.
Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty
160
-
-
Material and labour for preparation of ceiling surfaces and applying 1.5mm thick wall care putty complete to smoothen the underneath surfaces complete all as specified and as directed by Engineer-in-Charge.
Make: Asian Paints / Nerolac Paints /Jenson & Nicholson / Shalimar Paints / JK wall care putty
90
-
-
Taking down of chowkats or frames not exceeding 1.5sqm each with shutters (without taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge
10
-
-
Taking down of chowkats or frames exceeding 1.5sqm but not exceeding 4.0sqm each with shutters (with out taking off shutters from the frames) & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge
5
-
-
Taking down shutter carefully, area exceeding 1.0 sqm but not exceeding 2.0 sqm each including all fittings etc & removing clear off site after credit is recovered by Dept complete all as specified and as directed by Engineer-in-Charge
5
-
-
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 151 & 180 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge.
Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’
22.25
-
-
Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat molded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 149 & 176 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 200mm dia - 2Nos, handle 200mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge.
Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’
6.12
-
-
Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good in cement concrete in frame complete all as specified and as directed by Engineer-in-Charge.
0.3
-
-
Supply and fix mild steel work as in hold fast & similar small articles, conforming to Fe-290 Gde-E-165 complete all as specified and as directed by Engineer-in-Charge.
15
-
-
Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed plates, concrete block for hold fast etc including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge.
1
-
-
Supply and fix 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side complete all as specified and as directed by Engineer-in-Charge.
Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
8.28
-
-
Supply and fix 35mm thick factory made 2nd class hard wood glazed and skelton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pvts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
8
-
-
Supply and fix stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge
7
-
-
Supply and fix Stainless steel butt hinges medium weight of size 150mm all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
30
-
-
Supply and fix Stainless steel butt hinges medium weight of size 100mm all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
45
-
-
Supply and fix aluminium anodised barrel tower bolt of extruded section size 150mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
20
-
-
Supply and fix aluminium anodised barrel tower bolt of extruded section size 200mm complete all as specified and as directed by Engineer-in-Charge. Make : Classic/ Shalimar/ CLIF/ARGET
10
-
-
Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed by Engineer-in-Charge.
Make : Classic/ Shalimar/ CLIF/ARGET
20
-
-
Material and labour for preparing new wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux
30
-
-
Supply and fix 15 micron coloured aluminium sections for sliding or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge.
Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India
Note:
(i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.
350
-
-
Supply and fix 4.0mm thick black glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge.
Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain
25
-
-
Supply and fix 4.0mm thick figured glass, pin headed type ordinary quality fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge.
Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain
5
-
-
Supply and fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge
25
-
-
Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 of Decogrille or equivalent , cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE
25
-
-
Demolition of brick work/stone masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars, PCC coping etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge.
4
-
-
Material and labour for brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
3
-
-
Material and labour for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius, in half brick thick walls with old size bricks, built in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge
10
-
-
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.
391
-
-
Demolition of cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) and removal of rubbish to outside MD land etc complete all as specified and as per directed all as specified and as per directed
10
-
-
Material and labour for 75 mm thick cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in sub base of flooring/ hard standing, path and finishing the surface even and fair without using extra cement complete all as specified and as directed by Engineer-in-Charge.
40
-
-
Material and labour for 75mm thick cement concrete (1:3:6) type C1, using 20mm graded stone aggregate as in plinth protection and finishing the surfaces even and smooth without using extra cement, including joints of plinth protection filled with bitumen mastic (1:3) complete all as specified and as directed by Engineer-in-Charge.
50
-
-
Material and labour for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in foundation, filling, mass concrete etc complete all as specified and directed.
4
-
-
Material and labour for non skid coloured ceramic tiles (Joint Free) , 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 15mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.
Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles
30
-
-
Material and labour for non skid coloured ceramic tiles (Joint Free) , 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screed bed of 15mm thick in Cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.
Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / RAK tiles
190
-
-
Material and labour for non skid coloured ceramic tiles (Joint Free) , 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc., on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over & including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.
Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles / RAK tiles
21
-
-
Material and labour for coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick/ 450mm x 350mm x 7mm (or nearest size) ,on vertical surface such as skirting, dado, riser/steps etc, set and jointed in neat cement slurry and pointed in white or colour cement to match over & including cement plaster 10mm thick in Cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.
Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Nitco tiles / RAK tiles
150
-
-
Demolition of stone slab and tiles of any description or thickness in floor, apron and vertical surfaces, laid bedded and pointed in any mortar and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge.
8
-
-
Material and labour for machine cut Kota stone slab flooring 20-25 mm thick over cement screed bed 20mm thick in cement mortar 1:4 base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing etc complete all as specified and directed by Engineer in Charge.
80
-
-
All as per item No.58 described here-in-before but in skirting/dado including 10mm thick Cement Mortar 1:3 backing coat etc complete all as specified and as directed by Engineer-in-Charge.
5
-
-
Material and labour for rounding the edges of stone slab as in steps, cooking platform and similar situations complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and no pigments, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Make- (a) M/S Mehatab Tiles, Indore (b) National Tiles(c) Bharat Tiles and Engg Coy, Bangalore (d) Modern Tiles and Marbles Bangalore (e) M/s NITCO, Mumbai (f) Ultra (g) Duracrete
50
-
-
Material and labour for 20-25 mm thick machine cut cudappa stone slab in jambs / cills / soffits of window / ventilator as in frame work to support for aluminium section, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete over backing coat 10 mm thick in CM (1:4)complete all as specified and as directed by Engineer-in-Charge.
30
-
-
Material and labour for marble work 20 mm thick machine cut, table rubbed and polished, bedded and jointed as in steps, jambs, pillar, window cills, cooking platform and like bedded and jointed with grey cement slurry and pointing in white cement 1:2 using marble dust with admixture of pigment to match including 20mm thick screed bed/rendering coat in cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.
20
-
-
Supply and fix mild steel tubing medium grade 15mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith
30
-
-
Supply and fix mild steel tubing medium grade 20mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith
60
-
-
Supply and fix mild steel tubing medium grade 25mm, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239 including fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith
95
-
-
Dismantling of 110mm dia PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge
60
-
-
Dismantling of 75mm dia PVC pipe including bends/branch pipe jointed in cement mortar and taking out if required complete all as specified and as directed by Engineer-in-Charge
50
-
-
Supply and fix UPVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 110mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.
Make : Prince / Supreme / Finolex
60
-
-
Supply and fix UPVC (SWR) single socketed rain water pipes/ soil waste pipes with rubber ring joints, 75mm dia, fixed to walls complete all as specified and as directed by Engineer-in-Charge.
Make : Prince / Supreme / Finolex
50
-
-
Supply and fix UPVC (SWR) bends any radius, 110mm dia. complete all as specified and as directed by Engineer-in-Charge
Make : Prince / Supreme / Finolex/Astral
8
-
-
Supply and fix UPVC (SWR) bends any radius, 75mm dia. complete all as specified and as directed by Engineer-in-Charge
Make : Prince / Supreme / Finolex/Astral
8
-
-
Supply and fix UPVC (SWR) vent cowl 110 mm dia complete all as specified and as directed by Engineer-in-Charge.
Make : Prince / Supreme / Finolex/Astral
4
-
-
Supply and fix PVC (SWR) vent cowl 75 mm dia complete all as specified and as directed by Engineer-in-Charge.
Make : Prince / Supreme / Finolex/Astral
4
-
-
Supply and fix 32mm dia low density polyethylene pipes (LDPE) of pressure rating @ 6 kgf/ cm2 fixed to wall complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Supreme/Astral
12
-
-
Supply and fix in repairs UPVC (SWR) floor trap outlet dia 75mm, plain with gratings including jointing etc complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme/Astral
12
-
-
Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule all as specified and as directed by Engineer-in-Charge.
Make : Jaquar/ Marc/ CERA/ Kohler/ Player
18
-
-
Supply and fix in repairs concealed stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge
Make : Jaquar/ Marc/ CERA/ Kohler/ Player
12
-
-
Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge.
Make : Jaquar/ Marc/ CERA/ Kohler/ Player
10
-
-
Supply and fix in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) complete all as specified and directed by Engineer-in-Charge.
Make : Prayag / R.S. Industries (POLYTUF)
10
-
-
Supply and fix in repairs tubular towel rail aluminium anodised 20mm dia, 'D' type, 60cm long between flanges fixed to walls with screws complete all as specified and as directed by Engineer-in-Charge.
10
-
-
Supply and fix in repair Swivel Shower of PTMT any colour for fixing with 15 mm pipe (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge.
Make : Prayag / R.S. Industries (POLYTUF)
10
-
-
Material and labour for providing stages wise waterproofing treatment to sunken portion of toilets as under and as directed by Engineer-in-Charge.
Stage 1: Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc including removing debris outside MD land etc complete all as specified and directed.
Stage 2: Providing 15 mm thick plaster in CM 1:3 mixed with integral water proofing chemical of STP Ltd in the proportion /quantity all as per manufactures instructions.
Stage 3 : Primer - Mix Tarfelt LM with water in ratio 1:1 @ 250 gms/sqm and apply the primer on the plaster surfaces Stage 4 : Application of 1 st coat of Tarfelt LM of STP Ltd without dilution with water@1kg/sqm by brush all as per manufactures instructions.
Stage 5: Laying 50 GSM fibber glass cloth over the 1st coat while the coated surface is still tacky
Stage 6: After 6 to 7 hours interval apply second coat i.e final coat of Tarfelt LM without dilution with water of STP Ltd by brush as per manufactures instructions.@1kg /Sqm
Stage 7: Providing 10mm thick protective plaster in CM 1:3 mixed with STP NO -1 @ 250ml/50kg cement all as manufactures instructions.
5
-
-
Material and labour for plain cement concrete 1:5:10, type E-2, using 40 mm graded stone aggregate, as in lean concrete complete all as specified and as directed by Engineer-in-Charge.
1
-
-
Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed by Engineer-in-Charge.
Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson
5
-
-
Supply and fix in repairs vitreous china wash down, white, water closet pan (pedestal pattern) with 'P' of 'S' trap (of size 465mm x 355mm x 265mm),including plastic seat cover to match with colour of WC, closed pattern with flat bottom & cover and chromium plated mild steel or aluminium anodized hinging device including connecting to trap and flushing pipe, anti-syphonage pipe etc complete all as specified and directed by Engineer-in-Charge.
Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson
5
-
-
Supply and fix in repairs PVC valveless, syphonic action type low level flushing cistern 10 ltr capacity white with inlet ball valve, float and handle including brackets, flush pipe of polyethylene of low or high density or PVC 32mm dia including connection to pipe and fixing of chains and pull or lever complete all as specified and as directed.
Make : M/S Johnson Peddar/ Parryware/ RAK Ceramics/ CERA
6
-
-
Supply and fix in repairs CI nahani trap 75mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge.
Make : NECO/Sighal iron Foundry/Bengal iron Co/Dhatu Udyog/Kapilansh
3
-
-
Supply & Fix in repairs salt glazed stoneware gully traps, square/rounded mouthed type ' P 'of size 150 x 150mm including grating and setting in PCC 1:2:4 type B1 and jointing to drain with CM (1:1) complete all as specified and as directed by Engr-in-Charge
2
-
-
Supply and fix in repair PTMT grating doom over Nahani trap and floor trap of 100mm Dia (Min Wt 25 gms) complete all as specified and directed by Engineer-in-Charge.
Make : Prince / Supreme / Finolex/Astral
3
-
-
Supply and fix in repair PVC connection, 15 mm size 450 mm long both end socket fix complete all as specified and as directed by Engineer-in-Charge.
Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet
12
-
-
Supply and fix in repairs vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm excluding taps, waste chain and plug and porcelain stopper including brackets, chromium plated waste coupling, waste fitting etc, cutting for and pinning in ends of brackets, connecting to supply and waste pipe complete as specified and directed by Engineer-in-Charge.
Make : Cera/ Hindustan/ Parryware/ Jaguar/ Hindware/ Johnson
Note:- Pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.
6
-
-
Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.
6
-
-
Supply and fix in repair 450 mm x 600 mm bevelled edge mirror of selected quality glass, with PVC moulded frame decorative type, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup and washers complete all as specified and as directed by Engineer-in-Charge.
Make : Modi/ Atul/ Saint Gobain
3
-
-
Dismantling PVC water tank exceeding 1000 ltr but not exceeding 2000 ltr capacity and removing to store all as specified and directed by Engineer-in-Charge.
4
-
-
Supply and fix in rotational moulded polyethylene water storage tank (Cylindrical vertical with closed stop), HDPE, triple layered with ISI marked of 1000 ltrs capacity with inlet & outlet connections, tank nipple, bends, sockets etc, hoisted and fixed in position complete all as specified and as directed by Engineer-in-Charge. Make : Sintex/ Polycon/ Rotex
4
-
-
Supply and fix in repairs gun metal gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge.
Make : Leader/ Bir/ Zoloto/ Kirloskar
4
-
-
Supply and fix in repairs Ball valve high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe of 25mm dia complete all as specified and as directed by Engineer-in-Charge.
Make : Jaypee/ GMP/ Neta/ Zolota/ Prayag Polymer/ Symet
4
-
-
Supply and fix Nipple suitable for HDPE water tank (minimum weight 25mm - 65 gms) 25mm bore dia complete all as specified and directed by Engineer-in-Charge.
4
-
-
Demolition of the existing brick coba treatment over roof slab completely including thoroughly cleaning complete all as specified and removal of the demolished material to outside of MD land complete all as specified and as directed by Engineer-in-Charge.
4
-
-
Material and labour for PCC 1:2:4 type B0 (using 12.5 mm graded aggregate) with 2% by weight of cement or as per manufacturer's instructions water proofing as in levelling course, haunching, coping and similar works over RCC roof surface and RCC over head tank top surface including rounded or chamfered on edges and formwork etc complete all as specified and as directed by Engineer-in-Charge
4
-
-
Material and labour for APP modified waterproofing treatment over existing RCC roof slab with following specification including brushing off the surface to receive the treatment obtain the required surface complete as directed by Engineer-in-Charge :- (a) Applying oil bound bituminous primer @ 0.4lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (b) Laying 4mm thick APP membrane weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. Make of APP :STP Ltd/Texsa India Ltd/IWL Ltd/TIKIDAN Note : (i) The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane.
(ii) Water proofing compound will be measured and paid separately
(iii) Quoted rate includes the disconnection existing tanks of any litres capacity including all fittings, setting aside (for lowering if reqd) for roof treatment & reconnecting and refixing in position including all fittings complete all as directed.
50
-
-
Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge.
Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit
40
-
-
Supply and fix in repair, health faucet (body cleaner) with 1.0m tube and hook (PVC tube), white/Ivory Cat No- BEA-84 all as specified and as directed by Engineer-in-Charge.
Make-Prayag or equivalent as approved by GE
5
-
-
Supply and fix in repair, corner glass shelf 300mm Cat No- BEA-44 all as specified and as directed by Engineer-in-Charge.
Make-Prayag or equivalent as approved by GE
5
-
-
Dismantling wrought iron or mild steel work of any description not otherwise provided for & removing clear off site complete all as specified and as directed by Engineer-in-Charge.
3
-
-
Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge.
150
-
-
Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge.
18000
-
-
Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge
Note- Work to be carried out for height upto 15 mt and above/ factory type bldg/Hanger)
Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets
1000
-
-
Supply and fix Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge.
Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets/ TATA steel
30
-
-
Material & labour for Rolled mild steel conforming to grade Fe-290 (Gde E165) as in MS base plates (plain or chequered), channels , square cut or notched ( ordinary and counter sunk) forming holes including cutting ,welding or connecting complete all as speciied and as directed by Engr-in-Charge.
300
-
-
Supply & Fix anchor fastner, 12mm dia 100mm long or similar approved make fixed with anchor grout lokfix E77 or approved make of similar characteristics, the thixotropic nature of lokfix polyester resin grout P reduces flow of grout out of the hole, in overhead or horizontal holes incl. drilling holes of required sizes cleaning with the same with air pressure and filling with chemical as secified above placing of MS plate of required size and shape and drilling/ fixing the anchor bolt fastner complete all as specified and directed by Eng-in-charge. Note:- All MS items weight will be measured seperatly.
400
-
-
Material and labour for MS framed work such as grills , gratings, brackets of chajja etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge.
120
-
-
Material and labour for preparation of new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge.
Make : Asian paints/ Nerolac paints / Berger paints / Shalimar paints / Dulux
500
-
-
Material and labour for preparing old steel surfaces of any description and in any position, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint etc including necessary scaffolding arrangement as required at site complete all as specified and as directed by Engineer-in-Charge.
Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux
25
-
-
Removing loose disturbed & disintegrated concrete surface of RCC beams , columns, chajjas, lintel, ceiling etc and cleaning exposed rusted reinforcement , removing rusted scales by chipping and cleaning by wire brushes and applying anticorrosive epoxy coating as per manufacturer's instructions on prepared surface to receive gunniting including necessary scaffolding and preparing to support the damaged structural members, supplying & tying welded wire mesh 75 mm x 75 mm x 3mm dia, binding with GI wire 22 gauge to reinforcement , applying cement slurry uniformly to exposed surfaces and gunniting using CM 1:3, average thickness of gunniting not less than 40mm and finishing the surfaces with 10mm thick rendering in CM 1:3, trowelled even & smooth finish, without using extra cement & removing debris out side MD land complete all as specified and as directed by Engineer-in-Charge.
50
-
-
Material and labour for dismantling of rolling shutter of any size and(area not exceeding 15 Sqm each ) any description including all connected fittings etc complete all as specified and as directed by Engineer-in-Charge.
3
-
-
Material and labour for 1.25mm thick steel rolling shutters, with ball bearing, gear operated type with bevel gear box and crank handle, safety lever locks mild steel with 4 levers as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer, erected in position etc complete all as specified and as directed by Engineer-in-Charge. Make : M/s Swastik Rolling Shutters, Mumbai / M/s Shree Lakshmi Engg Wks, Bangalore / M/s Senthil Rolling Shutters & Engg Co, Chennai / M/s Jayaraj Industries, Chennai, M/S Darshan Rolling Shutters, Nasik, M/S Shalimar Rolling Shutters & Co.
9.6
-
-
Material and labour for re-fixing rolling shutter of any size and any description, dismantled vide Item no. 117 above carefully, without disturbing or deforming including all connected fittings/fixtures, oiling, greasing to shutter etc complete all as specified and as directed by Engineer-in-Charge.
28.8
-
-
Note: Deduct Credit for demolished / dismantled material of Rs. (-) 40,549.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%