Military Engineer Services Tender

S & F in replacement of PVC insulated Aluminium conductor 2 core 4 sqmm for from junction box to fitting ,multistranded all as specified and directed

Excavation in trenches in soft/loose soil n.exc 1.5 M wide and not exceeding 1.5 mts in depth in wide for laying of cables and n exc 1.5 mtr in depth and getting out incl dressing/trimming sides and levelling/grading and ramming of bottom of excavation complete all as specified and directed.

Returning and filling in, including spreading and well ramming in layers n exc 25 cm all as specified and directed

Removing excavated surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.5 mtr above starting point complete all as specified and directed

Supply and laying in 50 mm dia, double walled corrugated HDPE duct pipe confirming to IS 4984:1995 with antirodent and non flame propogating properties of approval black colour complete with fitting i.e.coupler,Tee,elbow clamp for cable protection of size 25/16 sqmm 4 core complete all as specified and directed

S& F GI tubing medium grade 50 mm dia ISI marked for fixing light with all fittings/ laid in trenches/ fixed to pole by flat iron clamps, nut,bolt,washers suitable size complete all as specified and directed.

Supply, transport, errecting and fixing steel tubular swaged welded pole of over all height 9 m long complete type 410-SP-31 conforming to IS-2713 (Part I to III 1980 reaffm 2008 with cast iron base plate, finial tapper plug cap, bolt, nut and washer etc and metching shape and design with the existing poles complete all as specified and directed . Note: (i) Excavation, earth work and PCC work for embedding pole shall be measured and paid seperately. (ii) Pole upto 1.5 m top of coping shall be painted with 2 coats of black and white strips alternate 30cm each over one coat of red oxide primer. (iii) Steel tubular pole above 1.5 m shall be painted with 2 coats of aluminium paint over a coat of red oxide primer and retro reflective tape of Red, Yellow and White color each of 2 inch wide fixed to the poles as directed (iv) Pole below ground shall be tarred by one coat (v) Poles shall be numbered and the rate for above items shall be deemed to be inclusive in the quoted rate.

M&L for PCC (1:3:6) type C-2 (Using 40 mm size graded stone aggregates) Cement concrete in foundations, filling and mass concrete complete all as specifed and directed.

M&L for PCC (1:2:4) type B-1 (Using 20 mm size graded stone aggregate) as in coping of pole sand including form work and demolition of existing coping complete all as specifed and directed

M&L for PCC (1:4:8) type D-2 (using 40 mm size graded stone aggregates) Cement concrete in foundations, filling and mass concrete complete all as specifed and directed.

S&F LED street light fiitting 100 Watt, 230 volt AC outdoor type with pressure die cast Aluminium housing and heat resistant complete with toughned glass, driver,lamp bracket with impect and corroson resistant including thermal management in multiple optics, with IP66 protection complete fixing to pole/wall with necessary nut, bolts and washers complete all as specified and directed.

S&F LED street light fiitting 70 Watt, 230 volt AC outdoor type with pressure die cast Aluminium housing and heat resistant complete with toughned glass, driver,lamp bracket with impect and corroson resistant including thermal management in multiple optics, with IP66 protection complete fixing to pole/wall with necessary nut, bolts and washers complete all as specified and directed.

S&F junction box thermo plast (weather proof) IP 66, on street light poles made out of thermoplastic of size 300mm x 200 mm x 105 mm size with connector for connecting incomming and outgoing of cable including 01 No of MCB DP 06 Amps to control the pole light circuit and MS brackets made out of 32 x 4 mm flats for fixing the box on post complete with nuts, bolts and washers and suitable size of double compression cable glands for incomming, outgoing of cable Complete all as specified and directed Make Sintex Cat pat No GSJB-3020 or equivalent make as mentioned in makes list in PS

M&L for MCB DP 230 volts C curve 6 amps complete all as specified and directed.

S&F in replacement of digital timer switch distribution board, factory assembled in powder coated sheet steel enclosure, comprising of 40 Amps 3 Pole MCB, power contactor and 230V digital time switch for controlling LED/SV etc street lights, including earth work for fixing Timer switch distribution Board and shall be provided 4 Nos 35x35x4mm thick angle iron supports of not less than each 0.6 mt height duly painted with anti corrosive black paint and grouted in PCC (1:3:6) at suitable depth as per site requirement complete all as specified and directed.(catered as Stand-by)

M&L for danger notice plate of 1.6 mm thick mild steelsheet ,vitreous enamelled white, with lettterrs, figures and conventional skull and bones in signal red colour and fixed with MSS clamp, bolts and nuts of approved size 20x15 cm for LT complete all as specified and directed

M&L for tarmac bituminised road cutting by using suitable hydraulic road cutter for a width not exceeding 300 mm and depth 600 mm for laying of 50 MM HDPE pipe incl refilling and making good with Tarmac/ PCC duly matching with the existing surface complete all as specified and directed Note :- Quoted rate shall deemed to incl the cost of making good the disturbed surface and removal of surplus materials, all as directed.

M&L for earthing complete with galvanised steel earth plate electrode 600x600x6.3 mm thick buried directly in ground vertically to a depth not less than 2.25mtr deep below ground level with top edge of the earth plate not less than 1.5mtr deep below normal ground level, connected with & including galvanised iron strip 25 x 4 mm connected to main test point as directed as earthing lead by means of nuts, bolts and washers of galvanised iron protected by 15 mm dia (medium grade) including concrete pit in PCC (1:3:6) type C-1, RCC cover slab 55 cm x 55 cm x 5 cm with reinforcement of 8 mm dia bar 100 mm c/c bothways including one handle made of 12 mm dia MS bar embedded in pre cast slab and 20 mm bore galvanised iron pipe"medium grade" for watering with GI funnel and wire mess including charcoal and salt in alternate layers of 15 cm including necessary excavation and earth work in any type of soil complete all as specified and as directed and testing on completion. Note: Length of earth lead of GI strip 25x4mm beyond 7.5m shall be measured and paid separately.

M&L for 25x4mm galvanised iron strip Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required at site all as specified and directed

Taking out existing defective worn out UG LT cable of any size 1100 volts grade from trenches of any size from different locations incl brick bats etc complete and depositing to store, all as specified and directed. Note: Excavation & earth wk shall be measured and paid for separately

Taking down the existing street light fitting/PTL/gate light of any type/ make/ wattage from its position checking, Repairing and refixing in position including replacement of connecting cable etc, fixed on pole/building structure, testing all the compenents / parts, wiring all as directed

S&F in replacement of HOT dip galvanised Octagonal pole 9 mtr height having across faces bottom side 155 mm top side 70 mm made out of 3 mm thick HT sheet steel plate along with base plate of size 250x250x16 mm thick and required nut ,bolts, suitable PCC foundation all as per manufacture instructions and all as specified and directed.

Disconnecting/taking down the hexagonal/ Hectagonal GI Pole which is titling/leaning by engaging suitable crane or manullay complete all as specified and directed

S&F in replacement 9 w LED WW bush and spike light luminaires in IP 65 enclosure warm white light output complete all as specified and directed, Make Halonix, Model HLOSPL-27-09-CW or equivalent make as mentioned in makes list in PS

S & F in replacement of 200 watts flood light Warm white in colour,  LM6 aluminium or higher grade powder coated and water proof pressure die cast aluminium enclosure, with inbuilt electronic drivers and IP 66 protection complete ,Single phase,  etc fixing in MS chanel by drilling hole of suitable , size, using nut, bolts and washers of suitable size including suitable mounting structure on existing pole as reqd at the site complete all as specified and directed Make : Havells Catpart No: TYCOONPT70WLED730PSYMTOPC or equivalent make as mentioned in makes list in PS

S&F in replacement of 70 W WW LED Out door post top light ,Correlated colour temperature 3000 K, post top with diecast aluminium body dark grey incl surge protection up to 2 KV confirm to IP-65 , incl suitable arrangements for 3 mtr decorative pole complete directed Make : Havells Catpart No: TYCOONPT70WLED730PSYMTOPC or equivalent make as mentioned in makes list in PS

S&F 60 W mini high mast luminery, energy saving , elegantly designed cast aluminium housing and heat sink for thermal management, high efficiency long life LED module aesthetically designed diffuser and reflector to deliver uniform light output, suitable for mounting on existimg pole with SS allen screws complete all as specified and directed Make: Bajaj, Model BGCPNP 60W LED CW or equivalent make as mentioned in makes list in PS

S&Fin replacement post top lentern outdoor type with Base with polycarbonate diffuser and IP 65 protection incl fixing to existingposition allas per site requirement and fixing arrangements complete all as specified and directed Make wipro cat No: LP10N-501-xx-57-xx or equivalent make as mentioned in makes list in PS

S&F in replacement outdoor gate light with 18W LED Bulb E 27 with Base with polycarbonate diffuser and IP 65 protection incl demolition of existing PCC and make suitable PCC for new gate light as per site requirement and fixing arrangements complete all as specified and directed Make Luker Catpart No: LGLA7E27 BK or equivalent make as mentioned in makes list in PS

S&F in replacement of Lamp holder with base suitable for gate light with 18W LED Bulb with Base with complete including fixing screws, claimps etc.complete all as specified and directed Make : Luker Catpart No: LGGLB or equivalent make as mentioned in makes list in PS

S&F in replacement of FOCO bulb B22/E27 9 WW complete all as specified and directed Make : Luker Catpart No: LBPCE09 or equivalent make as mentioned in makes list in PS

S&F in replacement of FOCO bulb B22/E27 15 WW complete all as specified and directed Make : Luker Catpart No: LBPCD15B or equivalent make as mentioned in makes list in PS

S&F street light spares of branded make as mentioned in the list of make enclosed with Particular specifications for replacement :- Electronic driver suitable for 90watts LED security light fittings complete all as specified and directed Make should be as per the Existing manufacturer.

Ditto all as item No 36 above but Electronic driver for 30/40/ 45 / 48 / 50/60 watts LED road way/Flood light/post top Make should be as per the Existing manufacturer

Ditto all as item No 36 above but Electronic driver for 200 watts flood lights Make should be as per the Existing manufacturer

S&F in outdoor LED strip of 220 V linear flex in colour WW, with fixing tape and end cap and suitable driver and connector of suiatble and IP 65 protection complete ,Single phase, mounting on the ceiling/wall/piller as reqd at the site complete all as specified and directed

S&F for provision of protective cover of 1.20 mtr high and suitable size & shape, made out of plain mild steel wire 3.15mm dia, galvanised class 3, in protection for Bollard light fitting and including necessary fixing arrengements to prevent th light fitting from any damage and theft complete all as specified and directed

S&F in replacement of distribution box 2 Module 230V, 5 HZ, IP-65 & IK-09 Class-II, weatherproof cabinets, door and cabinet fully reversible, removable chassis and faceplates, including weatherproof glands, rails qty-1 Nos, coppper fork type 100 A busbars as short link including end caps, qty-1 nos complete all as specified and directed Make: Legrand Catpart No 601932 or equivalent make as mentioned in makes list in PS