Military Engineer Services Tender

M&L for earthing complete with galvanized steel pipe electrode,40mmbore,medium grade,2.5 Mtrers length,buried directly and preferably vertically in ground with top edge not less than 1.25 meters below ground leavle cinnected with earthing lead of 4mm dia galvanised iron or steel wire all as shwn in Plate no-2 to the earthing test point all as specified and indicated including testing on completion.

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead using galvanised iron strip 25×4mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion.

Taking out LT Cable of any size(10 sqmm 2/4 core to 240 sqmm 3.5 core) for reuse or under Schedule of credit to contractor.Note:- Excavation is not included in quoted rate and will be measured & paid separately.

Supply ,laying ,commissoing,testing in repair UG cable 70 Sq mm x 3.5 core ,XLPE insulated screened PVC bedded ,galvanized steel strip or wire armoured ,electric power cable heavy duty 1100 volts grade with stranded aluminum conducter all as directed- Make :- Gloster/ Polycab/Vishal. Note:- some place ACSR conductor will be schedule of credit agaist the Cable.

All as per item-7 here in before but size of cable 10 Sqmm x 2 Core all as directed.

All as per item no-7 here in before but size of cable 10 Sqmm x 4 Core all as directed.

All as per item no-7 here in before but size of cable 16 Sqmm x 2 Core all as directed.

All as per item no-7 here in before but size of cable 16 Sqmm x 4 Core all as directed.

All as per item no-7 here in before but size of cable 25 Sqmm x 4 Core all as directed.

All as per item no-7 here in before but size of cable 35 Sqmm x 4 Core all as directed.

All as per item no-7 here in before but size of cable 50 Sq mm x 3.5 core all as directed.

All as per item no-7 here in before but size of cable 95 sqmm X 3.5 core all as directed.

All as per item no-7 here in before but size of cable 120 sqmm X 3.5 core all as directed.

All as per item no-7 here in before but size of cable 400 sqmm X 3.5 core all as directed.

Relaying of LT Cable of any size as obtained from item no-6 as per site requirment and making connections as specified and directed. Note:- Excavation is not included in quoted rate and will be measured & paid separately.

Supply and laying GI tubing 50 mm dia light grade for cable protection all as directed..

Supply and laying GI tubing 80 mm dia light grade for cable protection all as directed.

Dismantling and taking down MS cross arms, bracing supports, clamps, back plates, hooks etc fabricated from structural steel section from dismantled/existing LT poles of any type or description complete all as specified and directed.

Fixing only MS cross arms, bracing supports, clamps, back plates, hooks etc fabricated from structural steel section from dismantled/existing LT poles of any type or description complete all as specified and directed.

M&L cross arms, bracing supports, clamps, back plates, hooks etc fabricated from structural steel section (MS channel, angle sections, flat, round or square bars ) for reqd sizes and shape including bolts nuts & washers welding bending cutting cold or hot drilling holes for inserting in any shape or size as indicated or directed complete incl painting ( one red oxide primer coat two coats of aluminium paint ) complete.

Supply and fix GI strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground all as directed.

Dismentling / Taking down old Aluminium conductor steel rainforced any type and size. Note:- some place ACSR conductor will be schedule of credit agaist the Cable.

Supply, stringing, streaching and binding in replacement with insulator, ACSR conductor (Weasel /ferret/Mink) on HT/LT Poles including providing of necessary jumpers, connecting all existing incoming and out going connections etc all as specified & directed.

Re-Fixing/re-stringing Aluminium conductor steel rainforced of any type and size on existing steel tubular / PCC poles including winding, jumpering with alkathine pipe etc complete all as specified and as directed.

Dismantling and taking down insulators of any size from dismantled/existing LT poles of any type or description complete all as specified and directed.

M & L for LT insulator, PIN type 1100 volts as per IS 1445, grade of size 100mm height, 65mm dia, porcelain, vitreous, white or brown including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut including taking down existing unserviceable insulator all as directed. Make;- Elpro or equivalent.

Fixing only LT insulator, PIN type, 1100 volts grade of size 100mm height, 65mm dia, porcelain, vitreous, white or brown including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut including taking down existing unserviceable insulator all as directed. Make;- Elpro or equivalent.

Excavation in trenches Soft / loose soil not exceeding 1.5m wide and not exceeding 1.5 m in depth and getting out all as specified and directed.

Excavation in trenches for errection of poles etc.,n. exc 1.5m wide, exc 1.5m and n. exc 3.0m in depth and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm all as specified and directed.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point of any type of excavation all as specified and directed.

Demolition of PCC coping , base , etc any type any location all as directed.

M&L for provision of PCC 1:4:8, type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M & L for plain cement concrete 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth, platforms, pole coping etc., all as specified and as directed.

M & L for plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in plinth, platforms, pole coping etc., all as specified and as directed.

Taking down unserviceable feeder pillar/panel of any type any capacity,supplying, designing, fabricating, erecting, connecting, testing & commissioning outdoor type vermin & weather proof totally enclosed double door type feeder pillar box front and back operated with hood (Canopy) on top, sufficient ventilation on sides, cubicle type, compartmentable fabricated out of 3.15 mm thick CRCA sheet powder coated texture finish colour. The panel shall be erected on 50mm x 50mm x 6mm thick MS angle iron frame and shall be pre-wired with PVC insulated copper conductor cable for monitors & Heat shrinkable PVC insulated sleeves, copper strips of appropriate current carrying capacity for connecting the incoming and outgoing MCCBs including reconnecting of existing serviceable cable / new cable with lugs & Brass cable glands. The panel shall consisting of following accessories :- (i) Colour coded copper bus bar 400 Amp rating 3 Phase & Neutral. (ii) Epoxy insulator 16 Nos . (iii) Digital Volt meter 0 to 500 V with selector switch -01 Set (iv) Digital Ammeter with CT 0 to 100A with selector switch -01 set. (v) LED indicators R,Y &B - 01 Set. (vi) Angle Iron stand made out of 50x50x6 mm of suitable size & upto 0.6 mtr high above GL - 01 job. (vii) Internal connection to MCCBs/ MCBs with copper busbar/wiring - 01 Job. (viii) The panel shall provisioned compartments for fixing the following:- (a) MCCB 250/200 Amp TPN,( as in comming)- 01 No. (b) MCCB 160/100 Amp TPN, (outgoing) - 02 Nos). (c) MCCB 63 Amp TPN,(outgoing) - 02 Nos. (d) MCCB 40Amp TPN,(outgoing) - 02 Nos Note: (1) The Feeder pillar panel should be front & back openable and hinged door lock handle (2) The door should be tightened with rubber gasket (3) Each compartment have door, lock and Main bus bar and MCCB input & outgoing connection should be suitable size copper bus bar, nut & bolts etc (4) All incomming & out going cable connected through new suitable size copper gland and aluminium lugs, nut & bots etc. (5) This item not include the cost of MCCBs & MCBs, This should be measured and paid as separate item remaining all accessories are included in this cost.

Supply and fixing MCCB 250 Amp, 4 pole, 415 V,with breaking capacity 25 KA ,as per Conforms to IS-13947-2 and IEC 60947-2.Make :Belno/havells/Legrand

Supply and fixing MCCB 200 Amp, 4 pole, 415 V,with breaking capacity 25 KA ,as per Conforms to IS-13947-2 and IEC 60947-2.Make :Belno/havells/Legrand

Supply and fixing MCCB 160 Amp, 4 pole, 415 V,with breaking capacity 16 KA ,as per Conforms to IS-13947-2 and IEC 60947-2.Make :Belno/havells/Legrand

Supply and fixing MCCB 100 Amp, 4 pole, 415 V,with breaking capacity 16 KA ,as per Conforms to IS-13947-2 and IEC 60947-2.Make :Belno/havells/Legrand

Supply and fixing MCCB 63 Amp, 4 pole, 415 V,with breaking capacity 10 . Make : Belno/havells/Legrand

Supply and fixing MCB 40 Amp, 2 pole, 220 V,with breaking capacity 10 KA . Make : Belno/havells/Legrand

M & L in repair HDPE DWC pipe 40 mm dia ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection all as directed. Make:-Infra/Supreme/Prince

M & L in repair HDPE DWC pipe 50 mm dia ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection all as directed. Make:-Infra/Supreme/Prince

M & L in repair HDPE DWC pipe 80 mm dia ISI Marked fixed on walls, ceilings or in floors, trenches etc. for cable protection all as directed. Make:-Infra/Supreme/Prince

Supply installation fabricated MS ring suitable for fixing six number flood light on top portion of MS pole.Note:- The rate including the fixing arrangement of light fitting complete all as directed.

Taking down the unserviceable light fitting any type, supply and fixing Flood light(SMD Type) 120 watt with high pressure die cast housing with IP66,surge protection light netural warm white, all as directed. make:Benlo,Havells, Philips

Supply and fix in replacement of fibre looping box with connector and MCB SP 2 to 6 Amps of size 250x200x100 mm including making connections all as specified and directed by Engineer –in –Charge.Make - United / National / Sintex

S&F in repair Smart Integrated Solar All In One with 40 Watt , hight efficacy 150 lum/w power Rating, MPPT Charge Controller, Tiltable LED panel,Including Lithinim battery (inbuilt 30 Ah) Adjustable AIO mounting angle, Mono Crystalline Solar Panel, PIR motion Sensor, easy to install all as per directed. MAKE :- Crompton,Philips or in equvalent.

S&F in repair Smart Integrated Solar All In One with 60 Watt hight efficacy 150 lum/w power Rating, MPPT Charge Controller, Tiltable LED panel,Including Lithinim battery (inbuilt 70 Ah) Adjustable AIO mounting angle, Mono Crystalline Solar Panel, PIR motion Sensor, easy to install all as per directed MAKE :- Crompton,Philips or in equvalent.

Supply & fix cable jointing kit of cable 10 to 16 sqmm, 1100V XLPE grade cable for straight through Heat shrink type joint complete with jointing material and accessories suitable for 3.5/4 core XLPE armoured aluminium conductor cable complete all as specified and directed.. Make :- M-Seal/ Densons/ Dowells

All as item no-54 here in before but size of cable 25 to 30 sqmm,3.5/4 core

All as item no-54 here in before but size of cable 70 to 95 sqmm,3.5/4 core

All as item no-54 here in before but size of cable 120 to 240 sqmm,3.5/4 core

Taking down unserviceable street light fitting and supply and fixing LED SMD Type street light fittings 60W 3000K with DPD energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with necessary Bracket 50 mmGI Pipe with extended arm ,with Clamp ,nut& Bolts complet all as directe.Make: Benlo,Havells,Philips

Taking down unserviceable street light fitting and supply and fixing LED SMD Type street light fittings 90W 3000K with DPD energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with necessary Bracket 50 mmGI Pipe with extended arm ,with Clamp ,nut& Bolts complet all as directe.Make: Benlo,Havells,Philips

Taking down unserviceable street light fitting and supply and fixing LED SMD Type street light fittings 120W 3000K with DPD energy saving & environmental friendly long life Versatile pressure die-cast aluminium IP66 roadway luminaire with necessary Bracket 50 mmGI Pipe with extended arm ,with Clamp ,nut& Bolts complet all as directe.Make: Benlo,Havells,Philips

Supply and fixing PVC insulated and unsheathed cable of size 1.5 Sqmm single core multistranded copper conductor FR cable 1100 V grade confirming to IS 694.Make :Poly cab,Plaza

Taking down unserviceable Aluminium cable lug 120/95/240 sqmm and supply with fixing the same all as directed.Make:-Dewel,M-Seal

Taking down unserviceable Aluminium cable lug 50/70 sqmm and supply with fixing the same all as directed.Make:-Dewel,M-Seal

Taking down unserviceable Aluminium cable lug 25/35 sqmm and supply with fixing the same all as directed.Make:-Dewel,M-Seal

Taking down unserviceable Aluminium cable lug 16/10 sqmm and supply with fixing the same all as directed.Make:-Dewel,M-Seal

Supply and installed outdoor main control feeder pillar box cannopy type with IP-55 protection,fabricated with 3.15 mm sheet of size 650mm x 600mm x275mm with 40mm angle iron fram 300 mm from ground leave, suitable for installed arrangement 100/160 Amps MCCB as incommer,out going 63/40 MCCB/ MCB SP&N=04 Nos with copper busbar made with 30mmx6mm copper strip on distribution board having front opening with proper locking arrangement size of the panel 600mm width,650mm hight and 275 mm width, complete all as specified and directed. Note: (a) MCCB/MCB will measure in respective items of schele "A".(b) Rate included the Copper bus bar.

Supply and fixing street light pole of 5 mtr with top outer dia 100 mm bottom outer dia 175mm made with transucent conical pole glass fiber reinfored polymer matrix fiber (GFRP) combination of fiber glass and resign winding by CNC methode , desing & made to sustain a minimum wind speed of 180 km/hr GFRP anchor plate & base plate of size suitable size with LOGO manufacture design including dismantling existing u/s street light pole of any type adter disconnecting electrical connection and making good the disturbed surface complete all as specified and directed. Make Helipole of m/s CNC techanicals / Re-ensorce/ Bajaj / Transrail. Note (i) The contractor shall submit and approve the foundation drawing issueed by the manufacturer before starting the work. (ii) Excavation and earth work and PCC in foundation shall be measured and paid separately.(iii) The quoted rate include the rate of single arm of 01 m lenght suitabe size for pole

Supply and fixing street light pole of 7 mtr with top outer dia 105 mm bottom outer dia 215 mm made with transucent conical pole glass fiber reinfored polymer matrix fiber (GFRP) combination of fiber glass and resign winding by CNC methode , desing & made to sustain a minimum wind speed of 180 km/hr GFRP anchor plate & base plate of size suitable size with LOGO manufacture design including dismantling existing u/s street light pole of any type adter disconnecting electrical connection and making good the disturbed surface complete all as specified and directed. Make Helipole of m/s CNC techanicals / Re-ensorce/ Bajaj / Transrail. Note (i) The contractor shall submit and approve the foundation drawing issueed by the manufacturer before starting the work. (ii) Excavation and earth work and PCC in foundation shall be measured and paid separately. (iii) The quoted rate include the rate of single arm of 01 m lenght suitabe size for pole

Supply and installed GI hot dip Galvanized pole 5 mtr, top70 mm, and bottom 135 mm ,Top 70 mm made with 3mm thick Mounting base plate 250x Plate,fix on PCC foundation with foundation bolt 700mm long 250x12 mm with four nos foundation bolts with washer of size 16mm dia and 600mm long mm bolt,including street light bracket single arm minimum expoe lenght 1.5 mtrr length from poles with pole cape complete as per manufacturer design.(PCC for foundation measured and paid in respected sch a"A" items)

Cleaning and spray painting of panel/structure/ pipe/ channel / transformer etc of E/M installation distribution system along with side supports complete with two coats of synthetic enamel paint as per existing colour code all as directed by Engr-in-Charge.

M&L for PCC surface preparation by cleaning the surface from any moisture, dirt, wax, grease, flux residues and all other contaminants, applying two coats of Epoxy Primer on PCC surface, supplying and applying, two component Dielectric Coating on the prepared surface having Electric Strength not less than 32.2 KV/MM, Dielectric Dissipation not less than 0.074, Dielectric Constant not less than 10.93 K, Flash Point: Above 25 Deg. C a film of thickness 3 MM is achieved. Note : (a). The contractor has to produce a certificate from a Govt. approved Lab certifying all the characteristics & properties of the coating as stated above. (b). The contractor has to produce the test reports of the coatings applied at all the locations to the complete satisfaction of Engr-in-Charge. (c). The quoted rate is deemed to be inclusive of materials required for surface preparation.