Military Engineer Services Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date4 Feb 2025
Closing Date4 Mar 2025
Tender Amount₹ 1,45,50,000
Costs
EMD
₹ 2,20,500Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_696300_1Tender No
8891/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
M&L for 5 mm thick cement plaster on brick or concrete surfaces, as in ceiling / facia / chajja etc. in cement mortar 1:3 finished even and smooth without using extra cement, all as specified .
200
-
-
... More
Supply only integral water proofing compound
90
-
-
... More
Chipping, removing carefully loose/damaged concrete including plastering (total thickness upto 60mm ) from surfaces of RCC members, in any location by low impact Hammer/Breakar without damaging the structure & cleaning the surfaces with wire brush etc and disposal of debris out side MOD land complete all as specified and directed. Note : 1) Hard concrete shall not be removed by force
150
-
-
... More
M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit, upto 20mm thickness including levelling, profiling etc complete all as specified and directed.
150
-
-
... More
M&L for building up the profile of structural members by using polymer modified mortar from M/s. Krishna Conchem (Molith-PMM) OR Polymer mortar HB of Dr Fixit while the bonding agent is still tacking, exceeding 20mm thickness and not exceeding 40mm thickness in two layers, each layer not exceeding 20mm, including levelling, profiling etc, complete all as specified and directed.
150
-
-
... More
M&L for cleaning existing reinforcement with wire/ rotary wire brush to a shining bright finish, making the surfaces free from loose material, dirt etc complete and applying two coats of alkaline rust converting primer conforming to ASTM-B-117 of make. "Feovert" of "Krishna Conchem" OR "Roff Rust Cleaner' of 'Pidilite' OR 'Shali Rustoff' of 'STP Ltd', on rebars with time interval of 1 hour between the coats, complete all as specified and directed. [Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.]
150
-
-
... More
M&L for Anticorrosive Treatment to Reinforcement using IPNET-RB of M/s Krishna Conchem or Epoxy Zinc Primer of M/s. Dr. Fixit by application on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be done by brush after cleaning/wire brushing to the exposed steel surfaces complete all as specified and directed. Note :- Mode of measurement: superficial area covered between the end to end reinforcement bars (i.e., concrete area excluding all side covers) will be measured.
150
-
-
... More
M&L preparing new surfaces of walls applying two coat of oil bound distemper over 3mm thick wall care putty over a coat of primer complete all as specified & directed by Engr-in-Charge.
1372
-
-
... More
M&L for preparing old decorated surfaces of wall (plasterered or unplastered or complete removal of existing treatment) & applying two coat of oil bound distemper over 3mm thick wall care putty over a coat of primer complete all as specified.
1300
-
-
... More
M&L for preparation and applying three coats of white wash on wall over new plasterd surfaces and obtain smooth finish.
400
-
-
... More
M&L for preparation of old decorated surfaces of ceiling applying two coat of white wash complete all as specified and directed
600
-
-
... More
M&L for preparation of old decorated surfaces of wall and applying two coat of white wash complete all as specified and directed
450
-
-
... More
Material & Labour for preparation of new or old plastered surfaces of wall applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed.
2400
-
-
... More
S&F for 25 mm dia decorative/fancy type stainless steel curtain rod with brackets and knobs at both ends as per site requirement incl taking down old existing pipes with accessories. Note: the cost of brackets and knobs is deemed to be incl in the quoted rate. Nothing extra shall be paid on this account.
340
-
-
... More
S&F standard aluminum section powder coated (min thickness 50 micron) in partition / frame and door shutter, sliding windows / ventilators and places otherwise not specified cut to size, jointed with cadmium plated steel screws, including rubber beading or gaskets for fixing glass or wire cloth or Bakelite sheet and all necessary fittings, hinges, screws, plugs, locking arrangements for windows, Nylon ball bearing etc completed all as specified and directed (Aluminum section shall be of make Jindal / Hindalco / Indalco).
Note :- Weight of Aluminum sections for frames and shutters shall be only considered for payment. Cost of other consumables required for the item shall be deemed to be included in the quoted rate. However glass panes / Bakelite sheet / wire cloth / mortice lock / locking stay / floor spring / floor door stopper only will be measured and paid separately under respective items as supply only. Fixing by element of these items shall be deemed to be included in quoted rate.
300
-
-
... More
S&F in repairs aluminium anodised grill DG-104/DG-102 10 mm dia of extruded aluminium section of suitable size and frame including fixing with U clip or F section beading complete with all fitting and fixture and drilling required in RCC section in rectangular or arch type balcony opening of the building complete all as specified. (Make:- Deco Grill or equivalent)
200
-
-
... More
Supply only 4.00 mm thick sheet glass, ordinary quality, in squares not exc 0.5 Sqm each pane, complete all as specified.
300
-
-
... More
S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples Stainless steel wire cloth. 0.36mm nominal dia of wire and verage width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.
160
-
-
... More
Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) n exce 1.5 Sqm each including complete all as specified and directed.
45
-
-
... More
Taking down chowkats or frame with shutters ( without taking off shutters from the frame ) exceeding 1.5 Sqm but not exc 4 Sqm each including complete all as specified and directed.
65
-
-
... More
S&F second class hard wood , plain ,soild ,straight chowkats and frames, wrought , rebated on soild rounded or chamfered , put together with gule pinned at joints etc complete all as specified .and directed
3.15
-
-
... More
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with Square tube, supply and fixing in opening as per specification given under SSR Part II 2020 including making good the disturbed surface all as specified and directed. Make: SYNTEX/SHALIMAR/RAJSHRI
265
-
-
... More
M&L for factory made solid PVC panel type PVC door shutter 30mm thick consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rails, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent supplying and fixing in the frame at site as per specifications and drawing given under SSR Part II 2010 complete all as specified and directed. Make : SYNTEX/SHALIMAR/RAJSHRI
75
-
-
... More
S&F factory made 2nd class HW 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
150
-
-
... More
S&F 35mm thick glazed and skeleton shutters, in 2nd class hardwood, open rebated and prepared to receive glass, gauze etc, (without sash bar )edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24(a) Complete al as specified and directed
100
-
-
... More
M&L for preparation of newly or previously untreated surfaces of wood or wood based surfaces of any description not other wise described , over 10cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed.
694.88
-
-
... More
M&L for preparation of old surfaces wood or wood based surfaces of any description not other wise described , over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer etc complete all as specified and directed.
150
-
-
... More
S&F extruded aluminum alloy handles (150mm ) fabricated type anodised complete all as specified Make :- Shalimar / jyoti/ Classic/ Ashoka
448
-
-
... More
S&F hinges (125 mm) stainless steel medium weight complete all as specified
672
-
-
... More
S&F in repairs aluminum anodised barrel tower bolts (150 mm ) of extruded section complete all as specified
448
-
-
... More
S&F in repairs 250 mm Aluminium alloy , anodised , sliding door bolt with hasp, staple (bolt type ) and fixing clips of sheet , cast , exctruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified
84
-
-
... More
S&F floor door stopper aluminium body over length of cover plate 140 mm and tonque anodised with hard drawn steel spring fixed in floor complete all as specified and directed.
22
-
-
... More
Dismantling floor, hearth or wall tiling including cement mortar, bedding removing serviceable tiles to store and rubbish off the premises all as specified and directed .
1800
-
-
... More
M&L for coloured Non-skid ceramic tiles 7 to 8mm thick (square/ rectangular) of approved size, area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 15mm thick cement mortar screed bed in CM 1:6 etc, complete all as specified and directed.
240
-
-
... More
M&L for Glazed rectfied jointless coloured group ceramic tiles, PEI Grade-0 of size 300x450x7mm/300/600/7mm as in vertical surfaces such as skirting/dado etc., set and jointed in neat cement slurry and pointed with white cement and pigment to match, laid over and including 10mm thick plastering in cement mortar 1:4, complete all as specified.
1030
-
-
... More
M&L for coloured Virified Ceramic tiles 10 mm thick (square/ ectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layer of mortar 1:4 for laying floor finishes etc complete all as specified. Make Somnay/Kajaria or equivalent make.
310
-
-
... More
All as per item No 4 above but as in skirting over 10mm thick backing coat of CM 1:4
30
-
-
... More
M&L for green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match complete all as specified.
30
-
-
... More
M&L for 20-25mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like over 15mm thick in cement mortar (1:4) bedding including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, with and including providing nosing to edges of slab and drilling of hole for gas pipe using mechanical method. Note: Granite stone slab shall be in single piece to fit.
30
-
-
... More
M&L for machine cut kota stone slab flooring 20-25 mm thick over screed bed over bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfacey mixed with pigment to match the shade of the slab including rubbing and polishing
60
-
-
... More
M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab over 10mm thick backing coat in CM 1:4 including rubbing and polishing complete all as specified and as directed.
70
-
-
... More
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations over rendering 10 mm thick in CM 1:6 on brickwork or concrete surfaces complete all as specified and directed.
75
-
-
... More
S&F in repairs Vitreous China wash basin, white, flat back, size 580x450 mm including brackets, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed.
28
-
-
... More
S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with flush pipe and pvc connection of 450mm long fixed complete all as specified. Make Cera,Parryware, ESSCO all as specified and directed.
24
-
-
... More
S&F in repairs plastic water closet seat cover white or any colour closed padestrial pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified Make Cera,Parryware, ESSCO.
24
-
-
... More
M&L for viterous china squating pan of (Orrissa Pattern) size 580x440 mm white with 'P' or 'S' trap front or back inlet and integral foot rest (excluding flushing cisteern and flush pipe) fixed in repair including lime concrete bedding as required set complete all as specified and directed by Engr-in-charge.Make Cera,Parryware, ESSCO.
4
-
-
... More
S&F for PVC valveless, with top button double action type,syphonic action type flushing cistern, 10 litres capacity, low level, white with inlet, ball valve, float and handle, 32 mm dia PVC long bend flush pipe, fixed in repairs, complete all as specified. Make: Cera,Parryware, ESSCO.
28
-
-
... More
S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. complete all as specified and as directed
28
-
-
... More
S&F bevelled edge mirror of 600x450 selected quality mounted on 6 mm thick AC building board commercial ply and fixed to wooden plugs with chromium plated screws ad cup washers complete all as specified and directed.
28
-
-
... More
S & F in repair Bib tap CP fancy type long body 15 mm bore with will crutch or buttewrfly handle screwed down screwed to iron pipe complete with all fittings all as specified and directed. Make Cera,Parryware, ESSCO.
112
-
-
... More
S&F in repair for Stop cock /angle CP fancy type 15mm bore screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified and directed. Make : Cera,Parryware, ESSCO.
112
-
-
... More
S&F in repairs stop cock 15mm cast copper alloy with crutch or butterflty handle, screwed down screwed for iron pipe or for brass chromium plated with fancy type shank and cup(concealed type)
28
-
-
... More
S&F in repairs 15mm bore pillar taps,chromium plated, swan neck, cast copper alloy screwed high pressure with crutch or butterfly handle, screwed both end for iron pipe or for union complete all as directed. Make : Cera,Parryware, ESSCO.
28
-
-
... More
S&F for Brass chromium plated shower rose of 200mm size with arm and with or without swivel joints, fixed in repairs, complete all as specified. Make: Cera,Parryware, ESSCO.
28
-
-
... More
S&F for 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. .
84
-
-
... More
S & F PVC connections 15mm size with PTMT nuts of length 450mm
56
-
-
... More
Taking up or down steel tubing and connections, including cleaning serviceable pipe for refixing and balance under schedule of credit all as specified and directed
-
-
-
... More
(a)15mm bore
210
-
-
... More
(b) 20 mm bore
363.2
-
-
... More
S&F of 16 mm outer diameter CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings (including provision of special fittings i.e. brass elbow, brass tee, Male brass threaded adaptor, female brass threaded adaptor etc required for fixing of bib tap, stop valve with CPVC pipes) concealed in walls/ ceiling or laying in floors etc., also including cutting chases, grooves and making good the same in CM 1:3 after fixing of pipes / fittings, complete all as specified and directed.
210
-
-
... More
S&F 20mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and as directed.
363.2
-
-
... More
S&F 40mm bore GI tubing, medium grade with and including all fittings and fixed to walls and ceilings or laid in floors, including taking down and removal complete all as specified and as directed.
20
-
-
... More
S&F for 110mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and MS ring (25x6 FI used) bolt at every 1.5 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
328
-
-
... More
-'ditto all as per ser item No above but laid in trench or in floor
28
-
-
... More
S&F PVC (SWR) bends with or without door of 110mm bore.
56
-
-
... More
S&F 110mm bore PVC (SWR) branch piece single (Single Y ) equal or unequal
28
-
-
... More
S&F for 75 mm bore PVC pipes single socketed Pressure rating @4Kg/Sq cm length "medium grade " with rubber ring joint, fixed to walls with dash ture nut and bolt at every 2 mtrs length complete , incl taking up/down old pipe with all fittings all as specified and directed by Engineer-in-charge.
68
-
-
... More
All as per item No. 68.00 above but laid in trench or in floor
56
-
-
... More
S&F for 75 mm bore PVC bends/junction any radius complete all as specified and directed. .
56
-
-
... More
S&F for towel rail brass chromium plated, 20mm dia, D type, 60cm long between flanges, complete all as specified. Make: Jaquar Cat Part No.ACN 1111SM or equivalent in Make as per Appx `E' to Particular specification.
28
-
-
... More
M&L for peg set of six, stainless steel of suitable length, complete all as specified.
84
-
-
... More
S&F for Soap dish, SS, fixed to plugs with chromium plated brass screws, complete all as specified and directed.
28
-
-
... More
M&L for special treatment of sunken portion of WCs and Bath room as per following stages:
Stage 1 :- Demolition of WC including lime concrete and cement concrete coba etc and preparing the surfaces of existing sunken portion of WCs or bath etc with wire brush to remove all loose dirt, oil grease etc .
Stage 2:- Providing 10mm thick plaster in CM 1:4 with chemical of Dr. Fixit Pidicrete URP or plaster seal of STP Ltd
Stage 3:- Applying Dr Fixit Primseal primer or STP Ltd(and allow to dry for 8 hours) under touch dry condition
Stage 4:- Applying two coats of water proofing decorative elastomeric coating system of Dr Fixit Raincoats with DFT 100 Micron or shalicry 215 of STP(The surface after painting one coats shall be allowed to dry of 6 hours before next coats) all as per manufacturer instruction
Stage 5:-Again rendering 10mm thick in CM 1:4 mixed with Dr Fixit Pidicrete URP or plaster seal of STP Ltd.
Stage 6. All CI joints shall filled with mixture of cement fine sand and plaster seal of STP Ltd or Dr Fixit pidicrete URP. Stage 7:- Making holes in wall and fixing 600mm long 20mm dia GI spout for draining the surplus water if any.
60
-
-
... More
M&L for cement concrete 1:5:10 Type E2 (using 40mm graded stone aggregate) as in filling in sunken floor etc complete all as specified and directed.
11
-
-
... More
Dismantling boarding any description fixed in any position with nails complete all as specified and directed .
70
-
-
... More
M&L for 18mm thick MDF board for Kitchen cabinet/cup board shutter/Partation/Shelves etc in required size at site made out of 18mm thick MDF board both side decorative lamination PVC sheet complete all required etc. The panels shall be fabricated using adhesive and secure as required. All edges shall be covered with 2mm thick edge bonding taps or 90⁰ edge bent finish as per manufacturers instructions.
70
-
-
... More
S&F for 30 mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised.
34
-
-
... More
S&F for Magnetic catcher suitable for kitchen cabinet shutters.
56
-
-
... More
S&F for 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws.
28
-
-
... More
S&F for 125mm brass handles, cast type, polished bright complete all as specified and directed.
56
-
-
... More
Demolition of brick/cement concrete (unreinforced) / pcc tiles from existing roof/terrace etc and also removing/taking down of existing water proofing treatment of any thickness in any position including cleaning the surfaces of roof etc with wire brush complete and removing the retreived debris out side MD land, all as specified and directed.
25.5
-
-
... More
M&L cement plaster (1:3) with 10 mm thick to be finished smooth without using extra cement mixed with WPC @ 2% by weight of cement, , complete all as specified and directed. Note : WPC shall be measured and paid separately as supply only.
450
-
-
... More
M & L for APP modified roof treatment over existing roof slab etc including taking down to be executed through approved authorised applicator of the membrane manufacturer with the following specifications complete all as specified and directed:-
(a) Applying oil bound bitumen primer @ 0.40 litre/ Sqm manufactured by the same manufacturer as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on the prepared dry surface. (b) Laying APP modified water proofing membrane reinforced with non woven polyester fibre weight not less than 160gm/Sqcm using butane torch by torch application with 10cm side lap and 15cm end lap. (c) Physical properties of membrane shall be as under:- (i) Membrane weight not less than 3.50 Kg/Sqm. (ii) Non woven polyester weight not less than 160gm /sqm. (iii) Softening point of membrane not less than 150 degree Celsius. (iv) Joint tensile strength-longitudinal not less than 650N/Sqcm and transverse not less than 450 N/Sq cm (v) Tear strength-longitudinal not less than 300 N & transverse not less than 250 N. (vi) Elongation : 20% in both directions. (vii) Impermeability/water tightness at 2 Kgf/cm2.
(viii) Water absorption - Not more than 1% on mass within 24 hours.
(ix) Cold flexibility - Minimum (-) 20C.
(x) Dimentional stability % change = Maximum 1%. (d) Over the membrane provide a finishing with solar reflective bitumen aluminium paint @ 0.10 Kg/Sqm as prescibed by manufacturer.
450
-
-
... More
M&L for applying one coat of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm over APP membrane for non accessible roof complete all as specified and directed.
450
-
-
... More
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, as directed by the Engr-in-charge.
1
-
-
... More
Dismantling of plain, corrugated or semi corrugated sheeting, of any description, roof coverings all as specified.
100
-
-
... More
S&F for painted galvaume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of and colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified as directed.
100
-
-
... More
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240.
350
-
-
... More
Demolition of cement concrete ground floor paving or in any position n exc 15 cm thickness (below or above ground level) .
7.5
-
-
... More
M&L for 75mm thick PCC 1:2:4 type B-1 (using 20mm agg. ) as in plinth protection / path/ any paved area finishing cement concrete surface even and smooth complete all as specified and directed.
100
-
-
... More
S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed.
350
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specified and directed.
3.5
-
-
... More
M&L two coat of synthetic enamel paint over red oxide over preparation of new steel surface complete all as specified.
120
-
-
... More
M&L Preparation of old painted steel and iron surfaces of any description, not otherwise described, over 10 centimetre width or girth and applying One coat of synthetic enamel paint complete all as specified and directed.
40
-
-
... More
M&L for providing mild steel TMT bars in various structural RCC elements like column, beams and Slab etc. including cutting, bending, fixing the bars, tying with binding wires etc. complete all as specified and directed. Note: This item is applicable for additional bars required in the existing RCC structures.
100
-
-
... More
M&L for casting & repairing of excessively damaged distressed RCC members (exceeding 60mm in thickness) with prebatched, prepacked, single component ready to use microconcrete from Fosroc (Renderoc RG) or equivalent of Dr. Fixit as approved by GE, at any level/ height and at any lead or lift as directed including prefabricated water tight formwork, centering, scaffolding, also including mixing , laying, levelling, finishing, curing etc as per manufacturer's specifications and all other relevant works incl scaffolding upto 18 mtr height complete all as specified and directed.
(Note : Reinforcement only shall be measured and paid separately).
1000
-
-
... More
Taking down carefully point wiring of any type & pattern (Light/Fan/Socket or power) including fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings of any type etc and making good disturbed surfaces of walls/ roof etc, complete all as specified and directed.
984
-
-
... More
Taking down complete main switches/ MCB DBs with enclosure and its components of any size and capacity ,etc complete all as specified and directed.
56
-
-
... More
M & L in repairs for point wiring with PVC insulated FRLS unsheathed 1100 Volts grade single core multistranded copper conductor cable 1.5 Sqmm drawn in and including PVC concealed conduit of suitable size of wall/ RCC slab/ ceiling/ colunms/ beams etc with all accessories, fittings, PVC junction boxes etc, with suitabe sunk pressed steel boxes for modular fittings not less than 1.6 mm thick, including Modular cover plate of suitable size etc with necessary fixing accessories and earth continuity conductor cable of 1.5 Sqmm size connected to common earth and earth dolly including 1.6 mm thick pressed steel terminal boxes concealed in wall mounting switches / sockets / fan regulators fixed with Cadmium plated machine screws complete etc all as specified for one light / fan / bell point controlled by one switch. Note : 1. Two runs of cable, one run of earth wire, one run of PVC conduit will be measured and paid one unit.
Make of conduit :- Sudhakar/ Precision/ Diamond, Make of wire :- Finolex/ Havells/ Polycab/ KEI/Benlo
604
-
-
... More
All as per item No. 100 above but for one 6A 2pin/3pin socket out let multipurpose on the same board with other switches.
140
-
-
... More
All as per item No. 100 above but for one 6A 2pin/3pin switch socket out let multipurpose on independent Board.
140
-
-
... More
All as per item No. 100 above but wiring complete with 2.5 Sqmm for 3 pin 16A socket multipurpose on independent board
84
-
-
... More
S & F in repairs modular type 6A one way SP switch 1 module confirming to IS: 3854-1997 with finger proof terminal complete all as specified and directed. Make: Anchor/Havells/Bentec
884
-
-
... More
S & F in repairs modular type 2/3 pin 6 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed.
Make : Anchor (Panasonic)/Legrand/ Havells (Crabtree)/Bentec
280
-
-
... More
S & F in repairs modular type 2/3 pin 16 Amps socket 2 module conforming to IS: 1293-2005 complete all as specified and directed. Make : Anchor (Panasonic)/Legrand/ Havells (Crabtree)/Bentec
84
-
-
... More
S & F in repairs modular type 16 A one way SP switch 1 module confirming to IS: 3854-1997 with fingure proof terminal complete all as specified and directed. Make : Anchor (Panasonic)/Legrand/ Havells (Crabtree)/Bentec
84
-
-
... More
S & F shuttered type RJ-11 1 module Telephone socket complete all as specified and directed. Make : Anchor (Panasonic)/Legrand/ Havells (Crabtree)/Bentec
28
-
-
... More
S & F TV Co - axial socket 1 module complete all as specified and directed. Make : Anchor/ Leader/ Maru/ Crabtree/ Vinay.
28
-
-
... More
S & F in repairs modular type 120W step fan regulator of 2 module size conformng to IS: 11037-1984 complete all as specified and directed. Make : Anchor (Panasonic)/Legrand/ Havells (Crabtree)
84
-
-
... More
S & F in repairs Modular Bell push flush type 6 Amp, 1 module, 230 Volts complete all as specified and directed.
Make : Anchor (Panasonic)/Legrand/ Havells (Crabtree)
28
-
-
... More
S & F in repairs bell ding dong AC 230 V single pole. complete all as specified and directed.
Make : Anchor (Panasonic)/Legrand/ Havells (Crabtree)
28
-
-
... More
S & F Modular Blank plate 1 module suitable for Modular switch boards all as specified and as directed
10
-
-
... More
S & F Modular cover plate 12 modules complete all as specified and directed.
6
-
-
... More
S & F Modular cover plate 8 modules complete all as specified and directed.
84
-
-
... More
S & F Modular cover plate 6 modules complete all as specified and directed.
56
-
-
... More
S & F Modular cover plate 4 modules complete all as specified and directed.
12
-
-
... More
S & F Modular cover plate 3 modules complete all as specified and directed.
224
-
-
... More
S & F Modular cover plate 2 modules complete all as specified and directed.
44
-
-
... More
S & F Modular cover plate 1 modules complete all as specified and directed.
44
-
-
... More
S & F in repairs ceiling rose three terminal, 230 Volts PVC / Polycarbonate body, complete all as specified and directed.
Make : Anchor (Panasonic)/Legrand/ Havells (Crabtree)
494
-
-
... More
Supply & Fix Surface/Wall mounted,indoor decorative type LED luminaire extruded aluminium batten in anodized finished with opal diffuser,with IP 20 Protection of capacity 20W operating on 230V, 50Hz, AC Supply having luminous efficacy of not less than 100 lumens/watts, CCT 6500K, P.F0.9, 2.5 KV surge protection, 4-feet long, housing made out of engineering plastic with decorative end caps elegently designed complete all as specified. Make - Bajaj BCLAV20W-LEDP/ Jaquar LGLZU1X022XC/ Halonix HLB-03-20-CW-AL-SQ-HL2
270
-
-
... More
Supply and fixing in replacement of LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including provision with three core flexible copper conductor cable of suitable size and PVC square blocks complete all as specified and directed. Make - Bajaj/ Wipro/ Jaquar/ Halonix
84
-
-
... More
S & F LED light fitting 1X10W Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make - Bajaj/ Wipro/ Jaquar/ Halonix
16
-
-
... More
S & F Fency Jumbo Batten holder metal ring suitable for LED bulb of 9 Watt complete all as specified and directed. Make - Havells/ Anchor
84
-
-
... More
S & F LED Light Bulb 9 watt, Pin type of white colour, 230 V complete all as specified and directed. Make - Bajaj/ Orient/ Philips
84
-
-
... More
Taking down old unserviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire, replalcement of worn out capacitor 2.5 mfd - 01 No., PVC canopy - 02 No's and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed.
84
-
-
... More
Taking down old unserviceable Exhaust fan 300 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades and transporting to workshop to undertake repairs by rewinding of burnt out winding using suitable gauge copper wire and bearing including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site complete all as directed.
28
-
-
... More
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250m complete all as specified and directed. Make :- ALMONARD / ORIENT
28
-
-
... More
S&F modular type 3/5 pin socket with one single pole MCB 20 Amp 230 Volts complete all as specified including concealing in wall suitable for Geyser, AC and Domestic appliances complete all as specified and directed. Make - Havells/ Legrand/ Schneider/Anchor panasonic
28
-
-
... More
S & F MCB DB, 8 way, SPN, double door, 240 Volts and including cutting chases in wall, concealing DB in wall, making good the disturbed surfaces and making all connections complete all as specified and directed.Make: Havells/Anchor panasonic/Legrand/Schneider
Note: Quoted rate shall be deemed to include for provision of copper bus bar of 200 Amps rating.
28
-
-
... More
S & F MCB SPN 40 Amps, 240 / 415 Volts, 'B' Series, 50 Hz, 10 KA Breaking capacity complete all as specified and directed.Make: Schneider/Legrand/Havells/Indoasian
28
-
-
... More
S & F MCB SP 5 to 32 Amps, 240 / 415 Volts, 'B' Series, 50 Hz, 10 KA Breaking capacity complete all as specified and directed..Make: Schneider/Legrand/Havells/Indoasian
168
-
-
... More
Supply and fix Rigid non-metallic PVC conduit exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc of size 20mm for Telephone and TV wire complete all as specified and directed.
150
-
-
... More
M&L for sub main wiring with two single core 6.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 6.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed Make:Havells/Finolex/Benlo/Anchor panasonic
Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.
170
-
-
... More
M&L for sub main wiring with two single core 4.0 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 4.0 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed Make:Havells/Finolex/Benlo/Anchor panasonic
Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.
129
-
-
... More
M&L for sub main wiring with two single core 1.5 Sqmm PVC insulated FRLS multistranded flexible copper conductor cable 660/1100 volts grade down in through non metalic PVC casing caping with and including PVC insulated 1.5 Sqm single core single strand copper conductor as continous earth wire in green colour connected to common earth dolly including taking down old unserviceable submain wiring complete all as specified and as directed Make:Havells/Finolex/Benlo/Anchor panasonic
Note : 1. Two runs of cable, one run of earth wire, one run of PVC casing capping will be measured and paid one unit.
90
-
-
... More
S&F in repair/replacement of building Security light fitting 35 Watt made up of pressure die cast alluminium body with mid power LED as lighting sources and PC cover having Top opening separate driver compartment with IP66 protection and impact resistance of IK07 including fixing arrangements and taking down old rusted bracket fittings complete all as per directed by Engr- in – charge.Make: Bajaj/Jaguar/Halonix
16
-
-
... More
S& F in replacement of GI steel tubing medium grade 40 mm dia and length up to 1.5 meter bent to shape of offset angle upto 45 degree for fixing of security /street light fittings including MS clamps made of 32mm x5mm flat iron, nuts , bolts, etc all as directed by Engineer in charge
16
-
-
... More
Supply and fix indoor type vermin and weatherproof totally inclosed cubical type front operated, sufficient ventilation on sides cubicle type fabricated out of 2 mm thick CRCA sheet duly treated with seven tank process and painted epoxy powder coated siemens grey colour and with industrial type built in locking arrangement. The Panel indoor type cubical panel board IP 52 free standing floor mounted (CPRI approved manufacturers). The panel to be prewired with PVC insulated copper conductors appropriate current carrying capacity for connecting the incoming and out going MCCBs and MCBs. including disconnecting the LT panel and taking down the unserviceable cables and including MCBs. Energy meters of the panel shall be taking down and kept in safe custody for re-installation of site. Disconnecting the incoming and out going cable connection and dismantling the unserviceable conventional type industrial meter board and removing from site for further disposal and making LT UG cable connection complete of suitable size and comprising of following items:-
(a) INCOMER (i) MCCB 100 Amps 415V 16 KA 4 pole - 1 No. Make: Havells/Legrand/indoasian
(b) OUTGOING
(i) MCB SPN 63 Amps 'B' Series - 9 No. Make: Havells/Legrand/indoasian
(ii) MCB SPN 20 Amps 'B' Series - 2 No. Make: Havells/Legrand/indoasian
(iii) Space for fixing of single phase electronic meter - 9 Nos.
(c) Electrolytic copper BUS bar 125 Amps TPN with colour coded heat shrinkable sleeve
(d) METERING & INDICATION
i) Digital VAF meter with selector switch & 3 Nos of CT's -1 Set
ii) Indication lamps for R,Y,B phases -1 Set (Set of Three)
(e) Internal wiring with suitable size of PVC insulated stranded copper conductor cable duly crimped with copper lugs & ferruled.
(f) Manufacturer Name plate and Danger notice board written in regional language Hindi and English. Note 1. Layout & specification of panels shall be got approved by GE before placing the order.
3
-
-
... More
Supply and fix indoor type vermin and weatherproof totally inclosed cubical type front operated, sufficient ventilation on sides cubicle type fabricated out of 2 mm thick CRCA sheet duly treated with seven tank process and painted epoxy powder coated siemens grey colour and with industrial type built in locking arrangement. The Panel indoor type cubical panel board IP 52 free standing floor mounted (CPRI approved manufacturers). The panel to be prewired with PVC insulated copper conductors appropriate current carrying capacity for connecting the incoming and out going MCCBs and MCBs. including disconnecting the LT panel and taking down the unserviceable cables and including MCBs. Energy meters of the panel shall be taking down and kept in safe custody for re-installation of site. Disconnecting the incoming and out going cable connection and dismantling the unserviceable conventional type industrial meter board and removing from site for further disposal and making LT UG cable connection complete of suitable size and comprising of following items:-
(a) INCOMER (i) MCCB 100 Amps 415V 16 KA 4 pole - 1 No. Make: Havells/Legrand/indoasian
(b) OUTGOING
(i) MCB SPN 63 Amps 'B' Series - 5 No. Make: Havells/Legrand/indoasian
(ii) MCB SPN 20 Amps 'B' Series - 2 No. Make: Havells/Legrand/indoasian
(iii) Space for fixing of single phase electronic meter - 5 Nos.
(c) Electrolytic Copper Bus bar 125 Amps TPN with colour coded heat shrinkable sleeve
(d) METERING & INDICATION
i) Digital VAF meter with selector switch & 3 Nos of CT's -1 Set
ii) Indication lamps for R,Y,B phases -1 Set (Set of Three)
(e) Internal wiring with suitable size of PVC insulated stranded copper conductor cable duly crimped with copper lugs & ferruled.
(f) Manufacturer Name plate and Danger notice board written in regional language Hindi and English. Note 1. Layout & specification of panels shall be got approved by GE before placing the order.
1
-
-
... More
M&L for earthing using GI earthing strip 32 x 6mm complete with galvanised steel earth plate electode 600mmx600mmx6mm thick buried directly in ground, earth pit not less than 2.25 meters deep below ground level connection to and including GI strip of size 32x6mm to the extend 7.5 mtr as earth lead by means of GI bolts, Nuts etc. with provision of charcoal and salt all as per electrical plate No 3 of SSR Part I including water arrangement with GI Pipe 20 MM dia (medium Grade), earth lead protection pipe 50mm madium grade with bends, elbow etc. from earth plate to test point, excavation and earth work returning, filling, ramming and removing of soil to distance not exc 50mtr, make good to match with existing surface making PCC pit (Earth chamber) having internal size 30cm x 30cm x 30cm and outer size 60cm x 60cm x 60cm with RCC reinforced cover 50mm thick with one lifting handle made of 8mm dia MS bar funnel wie mesh and testing on completion including making test point on wall as per SSR specification all as specified and directed.
8
-
-
... More
Excavation in trenches not exceeding 1.50 m wide and n.exc 1.5 m in depth for foundation of poles, cable etc, not exc 10 sqm on plan and getting out in soft/loose soil including taking out brick protection etc complete all as specified and directed.
78.73
-
-
... More
Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick complete all as specified and directed.
46.98
-
-
... More
Removing excavated materials (soils) not exc. 50m and depositing where directed at a level not exc. 1.5m above the starting point complete all as specified and directed.
31.75
-
-
... More
M & L for sand cushioning by spreading in trenches crushed sand by gently by punning down manually as in cable protection all as specified and as directed by Engineer -in-charge.
23.62
-
-
... More
Supply and laying un-reinforced precast concrete cable cover class LV, type-I, flat size 250 mm x 150 mm x 40 mm laid in trenches all as specified.Make: Mehtab Tiles/National
1944
-
-
... More
Supply and Laying or fixing or passing through pipe, XLPE/PVC insulated, armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 70 Sqmm 3.5 core including necessary connection and providing cable lugs as required all as specified.Make: Havells/Polycab/Finolex
324
-
-
... More
M&L for cutting existing road/hard standing not exc 45x45 cm in wide & depth getting out excavated material for laying GI tube ;returning filling & well rammaing watering finish suraface 10 cm from top using PCC 1:3:6; including removal of surplase soil all as directed by Engr-in-Charge..
4.05
-
-
... More
S&F of HDPE pipe 100 mm dia, PN-10 for laying in ground, raod crossing etc for cable protection including necessary fittings, clamps for supports, etcall as directed by Engr-in-Charge.Make: Precision/Plasto/Supreme/Sudhakar
10
-
-
... More
S&F of HDPE pipe 75 mm dia, PN-10 for laying in ground, raod crossing etc for cable protection including necessary fittings, clamps for supports, etcall as directed by Engr-in-Charge.Make: Precision/Plasto/Supreme/Sudhakar
10
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%