Military Engineer Services Tender

M&L for CI special/fittings suitable for CI flanged/socket ends pipe upto 80 to 150 mm bore dia such as bends, (any radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc) tee piece, single branch 'Y' junction, double branch, cross (all flanged), collars, caps & plug, tail pieces, reducers, mechanical joint, etc. including required size and qty nut bolts and washer complete all as specified and as directed,

M&L for CI special/fittings suitable for CI flanged/socket ends pipe upto 200 to 300mm bore dia such as bends, (any radius and angle), tapers any type (straight, bend, increasing, decreasing or double socket etc) tee piece, single branch 'Y' junction, double branch, cross (all flanged), collars, caps & plug, tail pieces, reducers, mechanical joint, etc. including required size and qty nut bolts and washer complete all as specified and as directed,

Taking up old U/S 80mm bore hume pipe line/CI/GI any type water mains pipes, any class,(including all fittings),disconnecting pipes and fittings complete

All as per item No 6 above…. But for 100mm bore

All as per item No 6 above…. But for 150 mm bore

All as per item No 6 above…. But for 200mm bore

All as per item No 6 above…. But for 250mm bore

Relaying only 80mm bore old pipe in good condition/pipe taken out from trenches for repairs in any length including fittings etc.

All as per item No 11 above…. But for 100mm bore

All as per item No 11 above…. But for 150 mm bore

All as per item No 11 above…. But for 200mm bore

All as per item No 11 above…. But for 250mm bore

Supply and fix 80mm bore cast iron pipes with spigot and socket ends centrifugally casted class LA in any length suitable for rubber tytan joint and Laid in trenches

All as per item No 16 above…. But for 100mm bore

All as per item No 16 above…. But for 150 mm bore

All as per item No 16 above…. But for 200mm bore

All as per item No 16 above…. But for 250mm bore

M&L for 80mm rubber tyton joints for suitable for sockets and spigot CI pipes including rubber gasket

All as per item No 21 above…. But for 100mm

All as per item No 21 above…. But for 150mm

All as per item No 21 above…. But for 200mm

All as per item No 21 above…. But for 250mm

M&L for 80mm bore burning out lead joint in position , including removing lead to store / stacked at site to issue under credit and making new Run lead joint for spigot socket cast iron pipes and fitting, including cauking properly and making joint leak proof

All as per item No 26 above…. But for 150 mm bore

All as per item No 26 above…. But for 200 mm bore

Taking out 80mm bore old US sluice valves and supply and fix of new sluice valve PN-1.0 heavy duty ISI marked as per (IS-14846) with flanged ends with 02 Nos of rubber gaskets, nut bolts and washers along with SS spindle and operating wheel all as directed

All as per item No 29 above…. But for 100mm

All as per item No 29 above…. But for 150mm

All as per item No 29 above…. But for 200mm

All as per item No 29 above…. But for 250mm

Taking out sluice valves refacing, regrinding and refixing including Repacking stuffing box of sluice valve spindle brass including taking apart and reassembling of 200 MM complete all as specified and directed byEngineer-in-Charge.

Taking out sluice valves refacing, regrinding and refixing including Repacking stuffing box of sluice valve spindle including taking apart and reassembling of 150 MM complete all as specified and directed byEngineer-in-Charge.

M&L in repair of rusted & crack CI water branch connection 80 to 100mm dia by using mechanical joint with connecting all accessories complete all as specified and directed byEngineer-in-Charge. Note : (i) cost of gasket and nut bolts ,washers'jointing of materials as required are inclusive in above job. ii) Required T&P for job is provided by the Contractor is deemed to be included in the item rate. (iii) Excavation for pipe is included in job Work.

All as per item No 36 above but for size of pipe 150mm to 300 mm dia

M&L for dismantling old wall valve chamber and construction of brick masonary new valve pit chamber of size 900mmx900mmx900mm (internal ) size 100mm thick PCC 1:4:8 type D2 lean concrete foundation using 40mm graded stone aggregate providing well burnt brick masonary wall of 23mm thick built in CM 1:6 rendering in cement 1:6 finished even smooth using extra cement internally and 20mm thick in CM 1:4 and finished fair and even supply and fix 3.15 mm thick MS sheet steel cover fixed on 50mmx50mmx6mm thick angle iron frame embeded in PCC coping with locking arrangement and 1 Nos 50mm size 4 levers lock with key in duplicate Standard size and MS hold fast and handle made out of 25 x 6mm flat iron applying two coats of synthetic enamel paint of approved shade over a coat of primer (Red Oxide) to all exposed surface making good all disturbed surface to match surrounding complete all as specified and directed.

All as per item No 38 above but for size 1200mmx1200mmx1200mm.