Military Engineer Services Tender
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Civil And Construction
Eprocure
Opening Date24 Sep 2024
Closing Soon22 Nov 2024
Tender Amount₹ 3,00,00,000
Costs
EMD
₹ 3,75,000Document Cost
₹ 2,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_MES_676393_1Tender No
84607/DEOTender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
NIT FOR THE WORK ADDN ALTN TO EXISTING BUILDINGS AT ACCS AHMEDNAGAR
BOQ Items
Demolition of brickwork or stone boulder masonry built in cement mortar including all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified and directed.
6.45
-
-
Taking down cement plaster any description on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete.
3422
-
-
Taking down chowkhats or frames with shutters (without taking off shutters from frame) of following sizes and removing from site either for safe custody to reuse or under Schedule of Credit complete all as specified and as directed:-
-
-
-
(a) Area not exceeding 1.50 Sq.M each.
216
-
-
(b) Area exc. 1.50 Sq.M but n. exc 4.00 Sq.M each.
12
-
-
Taking out old serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds, any thickness or size exc 1.50 Sq.M each; hacking out old putty or removing beads etc, including making good breakages in taking out and handling removing to store or stacking for reuse; complete all as specified and directed.
25
-
-
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store or under Schedule of Credit all as specified and as directed of following sizes:-
-
-
-
(a) Bore of pipe 15 mm
25
-
-
(b) Bore of pipe 20 mm
12
-
-
(c) Bore of pipe 25 mm
1300
-
-
Excavation over areas, n. exc 1.50 m deep in soft or loose soil and getting out; complete all as specified and as directed.
5.5
-
-
Removing excavated soil to a distance exceeding 250 m but not exceeding 500 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point all as specified and directed.
5.5
-
-
M&L Moorum filling in floors or paving, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and directed.
187.3
-
-
M&L Hardcore of gauge exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and directed.
187.3
-
-
M&L Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregates) as in 75 mm thick sub base; complete all as specified and directed.
1873
-
-
S&F Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide; complete all as specified and directed..
50
-
-
M&L Reinforced cement concrete M-25 (design mix) using 20 mm graded stone aggregates in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete; complete all as specified and directed.
187.3
-
-
M&L MS TMT bars 10mm dia and over, cut to length, bent to shape reqd, including cranking, bending spirally for hooping for columns and binding with mild steel annealed wire of dia not less than 0.9 mm or securing with clips complete all as specified and directed.
NOTE: The scope of work contain raking out plaster or cover of concrete by drilling etc. and inserting and welding new TMT bars with old reinforcement for toothing bonding of old RCC structure and new RCC structure.
5923
-
-
M&L MS TMT bars 6 mm to 8 mm dia and over, cut to length, bent to shape reqd, including cranking, bending spirally for hooping for columns and binding with mild steel annealed wire of dia not less than 0.9 mm or securing with clips complete all as specified and directed.
NOTE: The scope of work contain raking out plaster or cover of concrete by drilling etc. and inserting and welding new TMT bars with old reinforcement for toothing bonding of old RCC structure and new RCC structure.
3820
-
-
M&L for fixed in repair, Machine cut machine polished Kota stone slab 20-25mm thick of size not less than 550 mm x 550 mm as in floor etc., over and including 20 mm thick cement screed bed or bedding layer in CM (1:6), bedded and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and as directed.
4098.2
-
-
M&L for fixed in repairs Machine cut machine polished Kota stone slab 20-25mm thick as in treads & risers of stair case, skirting, dado, on pillars etc., over and including 15 mm thick cement screed bed or bedding layer in CM (1:4), bedded and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
282.56
-
-
M&L Coloured glazed ceramic tiles digitally printed of size 300 mm x 450 mm and 7 - 8 mm thick as in skirting, dado, on vertical surfaces etc., laid over and including 10 mm thick cement screed bed or bedding layer in CM (1:4), bedded and jointed with white or coloured cement to match the shade of the tiles, complete all as specified and as directed.
1301
-
-
M&L Joints free / rectified anti skid coloured ceramic tiles to match with dado tiles as approved by GE of size 400 mm x 400 mm and 7 - 8 mm thick as in floors etc., laid over and including 20 mm thick cement screed bed or bedding layer in CM (1:6), bedded and jointed with white or coloured cement to match the shade of the tiles, complete all as specified and as directed.
585
-
-
M&L 18 to 20 mm thick Granite slab, machine cut and machine polished, as in risers or steps, jambs, cills, skirting, dado, cooking platform etc., laid over and including 10 mm thick backing coat in CM (1:4), jointed with grey cement slurry and pointed with white cement with admixture of pigment to match shade of granite stone including grinding and polishing complete all as specified and as directed.
16
-
-
M&L Machine cut machine polished Kota stone slab 20-25mm thick in one piece as in treads & risers of stair case etc., over and including 10 mm thick cement screed bed or bedding in CM (1:4) for bedded and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and as directed.
124
-
-
M&L Providing edge moulding to 18-20mm thick Granite stone of any description of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed.
265
-
-
M&L Brick work with old size fly ash bricks, straight or curved on plan exc. 6 metre mean radius, built in cement mortar 1:6, in any position, complete all as specified and directed..
30
-
-
M&L Brick work with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:6, in any position, complete all as specified and directed..
3
-
-
M&L Rendering 10 mm thick in cement mortar (1:6), over fair face of Brick or concrete surfaces, finished even and fair and material and labour applying white putty not less than 1.5 mm thick over plaster and finished even and smooth, complete all as specified and directed.
250
-
-
M&L Rendering 15 mm thick in cement mortar (1:4), over fair face of Brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
1240
-
-
M&L Rendering 5 mm thick in cement mortar (1:3), over concrete surfaces of ceiling, finished even and smooth without using extra cement, complete all as specified and directed.
50
-
-
M&L Preparation of new or old plastered surfaces of any description and applying 2 mm thick wall care putty, finished even and smooth, complete all as specified and directed.
5950
-
-
M&L Preparation of newly plastered surfaces of any description and applying two coats of oil bound distemper over a coat of primer as per manufacture's recommendation, provided to any height as directed, complete all as specified.
250
-
-
M&L Complete removal of existing treatment of old plastered decorated surfaces of walls and applying two coats of oil bound distemper, provided to any height as directed, complete all as specified and directed.
6200
-
-
M&L Preparation of newly plastered surfaces or unplastered surfaces of ceiling including cornices and applying two coats of white wash, provided at any height, complete all as specified and directed.
2500
-
-
M&L Preparation of newly plastered surfaces or unplastered surfaces of ceiling including cornices and applying three coats of white wash, provided at any height, complete all as specified and directed.
50
-
-
M&L Complete removal of existing treatment on walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sq.m over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sq.m over new surfaces complete all as specified and directed.
7050
-
-
M&L Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 Sq.m over and including priming coat of exterior primer applied @ 0.90 litre/ 10 Sq.m over new surfaces complete all as specified and directed.
1240
-
-
M&L Preparation of old wood or wood based surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
1300
-
-
M&L Preparation of old steel or iron surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.
800
-
-
S&F Solid PVC door frame of size 50mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as specified in drawing given in MES Schedule and all as specified and as directed.
573
-
-
S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30 mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2 mm plain colour PVC sheet on back face; supplying & fixing in frame at site as per specification & drawing; complete all as specified and directed.
186
-
-
S&F Powder coated Anodised aluminium (thickness of powder coating not less than 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, rubber /neoprene beading and locking arrangement etc. complete all as specified and directed.
165
-
-
S&F 3 mm thick Sheet glass, frosted / pin headed ordinary quality not exceeding 0.5 Sq.M in each pane and glazing with oil putty or fixed with beads complete all as specified
80
-
-
S&F Butt hinges, 100 mm long, medium weight, cold rolled mild steel, and fixed, complete all as specified and as directed.
360
-
-
S&F 150 mm long aluminium anodized barrel tower bolts of extruded sections, complete all as specified and directed.
240
-
-
S&F Extruded Aluminium alloy handles, fabricated type, anodized 150 mm long complete all as specified and directed.
240
-
-
S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type), 300 mm long and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
12
-
-
S&F in repairs vitreous china wash hand basin white, flat back of size 550 x 400 mm, waste chain & plug & porcelain stopper and also including CI / MS brackets, cutting for and pinning in ends of brackets including 32 mm dia CP waste coupling and PVC 32 mm dia waste pipe 90 cm long, making all inlet and outlet connections, complete all as specified and as directed.
48
-
-
S&F in repair, water closet squatt pattern complete, vitreous china squatting pan 'Orissa' pattern of size 580 x 440 mm, ivory coloured, with integral foot rest excluding flushing cistern & flush pipe etc., but including P or S trap for outlet connection and setting the pan in lean concrete below level of rim of pan to receive floor finish, complete all as specified and directed.
60
-
-
S&F in repair, water closet squatt pattern complete, vitreous china squatting pan 'Orissa' pattern of size 580 x 440 mm, ivory coloured, with integral foot rest excluding flushing cistern & flush pipe etc., but including P or S trap for outlet connection and setting the pan in lean concrete below level of rim of pan to receive floor finish, complete all as specified and directed.
60
-
-
S&F in repair, Vitreous China Urinal, half stall type, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as specified and directed.
24
-
-
Taking up or down steel tubing and connections, including cleaning for refixing or removal to store or under Schedule of Credit all as specified and as directed of following sizes:-
-
-
-
15 mm nominal bore.
480
-
-
20 mm nominal bore
300
-
-
25 mm nominal bore.
90
-
-
Supply, laying and jointing CPVC pipes SDR 11 and Plain CPVC SDR 11 fittings etc. laid in trenches / floors/ wall surfaces etc, totally concealed all as specified and directed for following sizes :-
-
-
-
16 mm outer dia of pipe.
480
-
-
20 mm outer dia of pipe.
300
-
-
25 mm outer dia of pipe.
90
-
-
S&F in repairs PVC connections 15mm size with PTMT nuts of length 450 mm, complete all as specified and as directed.
132
-
-
S&F in repairs Stop cock / angle cock/ two way cock, cast copper alloy, chromium plated fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed, complete all as specified and as directed.
204
-
-
S&F Brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges, complete all as specified and as directed.
24
-
-
S&F in repairs Bib taps, cast copper alloy with crutch or butterfly handle, chromium plated fancy type, screwed down, screwed for iron pipe of 15 mm bore and fixed, complete all as specified and as directed.
48
-
-
S&F in repairs Pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe of 15 mm bore and fixed, complete all as specified and as directed.
48
-
-
S&F in repairs PVC flexible waste pipe 32 mm bore for WHB, sink etc. and fixed, complete all as specified and as directed.
48
-
-
S&F in repairs PVC (SWR) pipes 110 mm dia, single socketed in any length with rubber ring joints and fixed to walls with necessary stay clamps etc. complete all as specified and as directed.
90
-
-
S&F in repairs PVC (SWR) pipes 110 mm dia, single socketed in any length with rubber ring joints and laid in trenches or in floors etc. complete all as specified and as directed.
15
-
-
S&F in repairs PVC (SWR) pipes 75 mm dia, single socketed in any length with rubber ring joints and fixed to walls with necessary stay clamps etc. complete all as specified and as directed.
72
-
-
S&F in repairs PVC (SWR) pipes 75 mm dia, single socketed in any length with rubber ring joints and laid in trenches or in floors etc. complete all as specified and as directed.
12
-
-
S&F PVC (SWR) bends any radius, with access door, suitable for 110 mm dia pipe complete all as specified and as directed.
63
-
-
S&F PVC (SWR) bends any radius, with access door, suitable for 75 mm dia pipe complete all as specified and as directed.
56
-
-
S&F PVC (SWR) vent cowl, suitable for 110 mm dia pipe complete all as specified and as directed.
9
-
-
S&F 600 mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and as directed.
48
-
-
M&L Rounding to edges of stone slabs one edge, such as in steps, cooking platform, jambs, cills and other similar situations complete all as specified and as directed.
99
-
-
S&F PVC (SWR) Nahani / floor trap for diameter of outlet 75 mm, plain with grating including jointing to waste pipe with solvent cement, complete all as specified and as directed.
72
-
-
M&L Rendering 10 mm thick in cement mortar (1:6), over fair face of Brick or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.
2002
-
-
M&L Providing Water proofing treatment to RCC roof slab and shall be carried out as specified below and directed including testing of water tighness after completion of water treatment works to entire satisfaction of GE :-
1933
-
-
(a) The plastered roof surface shall be thoroughly cleaned with wire brushed, cleaned to eliminate all sharp projection, washed, dried up and cleaned of all foreign matter and dust to receive primer.
-
-
-
(b) Bituminous primer shall be applying on cleaned roof surface @ 0.30 Litres/Sq.m and the surface shall be allowed to dry.
-
-
-
(c) APP polymer modified approved membrane 3mm thick, non woven, polyester, weighing not less than 3.6 Kg/Sq.m and laying on roof surface and parapets with laps, overlaps and sealing joints as specified and shall be applied completely by torch application method. The overlap of membrane while torching shall be kept 100mm on length wise and 100 mm width wise.
-
-
-
(d) Finally, a coat of solar reflective bituminous aluminium paint @ 0.15 litre/Sq.m shall be applied on the top of membrane surfaces.
-
-
-
Note; The treatment shall be carried out as per manufacturers instructions and through authorised applicator of manufacturer.
-
-
-
Dismantling / Demolition of existing roof terracing of cement / brick concrete (un-reinforced) and existing water proofing treatment of any thickness and in any position on top of roof of building by chiselling or any other suitable method to avoid any damages to existing roof of building, cleaning the surface of roof with brush / mechanical brush and with water thoroughly to remove all loose materials / dust / dirt to expose the bare concrete of roof slab and removal of rubbish / demolished materials outside MD land etc. complete all as specified and directed.
15
-
-
M&L PCC (1:2:4) type B-0, using 12.5mm graded stone aggregate as in levelling / padding course over roof of building and to cover negative slope into proper slope required mixed with WPC as per manufacturers instructions; finished even & smooth without using extra cement, complete all as specified and directed. Note; Water proofing compound shall be measured & paid separately.
15
-
-
M&L Providing, cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges including use of necessary form work, complete all as specified and directed.
6
-
-
Supply only polymer based liquid water proofing compound all as specified and directed.
290
-
-
M&L Chipping. removing. carefully loose concrete work by low impact Hammer/Breaker without damaging the structure / structural member and cleaning and disposal of malba out side the premises etc complete as directed. Hard concrete should not be removed by force.
60
-
-
M&L Cleaning existing reinforcement with wire / rotary wire brush, making the steel surfaces free from loose maternal dirt etc. complete and applying one coat of rust remover on the rebars including cleaning the reinforcement, wire brushing to remove loose rust spalls, with time interval of 1 hour between the coat, complete as directed.
Note: Mode of measurment shall be superficial area of concrete surface.
6
-
-
M&L Anticorrosive treatment to reinforcement by application of two coats on exposed reinforcement in two coats with time interval of minimum 4 hours between each coat. The application shall be by brush only.
60
-
-
Providing and fixing additional steel bar in various structural elements like column beams and Slab etc. including drilling bending and fixing the bars tying with preleft binding wires etc. complete, Steel shall be provided on the basis of 1% of volume of concrete, anchoring reinforcement bar in existing RCC member shall be in holes of minimum 10 d depth for 8 to 12 mm dia. Note: Anchoring reinforcement bar in existing RCC member will be measured and paid separately.
30
-
-
M&L Anchoring reinforcement bar in existing RCC member in holes of minimum 10d depth for 8 Nos to 12 mm dia. Bars and grouting in position with locfix of fosroc or equivalent including drilling of holes. cleaning etc. complete. (Only applicable for complete recasting).
30
-
-
M&L Cleaning all loose laitance on the sub concrete strata & apply one coat of epoxy bonding agent on exposed concrete surface.
60
-
-
M&L 20mm thick (average) polymer modified mortar including keeping the surface moist and curing with water for 5 to 7 days etc complete all as specified and directed
40
-
-
M&L 30mm thick (average) polymer modified mortar including keeping the surface moist and curing with water for 5 to 7 days etc complete all as specified and directed
60
-
-
Material and labour for water proofing treatment to sunken slab, walls, etc, shall be carried out as specified below and as directed.
201
-
-
(a) Clean the sunken portion of toilet / Baths/ WCs/ Kitchen thoroughly to remove laitance, dirt, dust etc.
-
-
-
(b) Form angle fillet of size 40 mm x 40 mm along the junction of wall and floor using polymer modified mortar.
-
-
-
(c) Sanitary pipes entering through walls and floor shall be sealed with “Dr Fixit Bath seal Tape” and the gaps to be grouted with non-shrink cementitous grout “Dr Fixit Bath seal Grout” or equivalent. Nahani traps etc to be fitted securely and the gaps around it to be grouted in the same manner.
-
-
-
(d) Apply one coat of a Bitumen-modified polymer coating “Dr Fixit Bath seal Plus” or equivalent on all angle fillets by brush and cover it with 100mm open woven mesh when it is still wet. Apply second coat of the same coating on the angle fillets and allow it to dry completely.
-
-
-
(e) In the remaining area, in dry substrate condition brush apply first coat of the same coating and further apply second coat when first is dry. Extend the coating upto 150mm above the FFL. Above FFL, another cementitious waterproofing waterproof coating “Dr Fixit Pidifin 2 K” or equivalent can be further applied right upto 2.1 m to waterproof the shower area also, if it is a bathroom or bath cubicles of a sanitary annex and apply second coat after 6-8 hours and allow to dry completely.
-
-
-
(f) After 2 to 3 days, sunken portion must be overlaid with a 50 mm thick concrete screed 1:3:6 type B0 mixed with integral WPC (Liquid) laid to slope 1:60 towards outer face of wall. Provide 40 mm OD UPVC pipe at the lowest point with 300 mm projection beyond the outer face of the wall. Then fill up the sunken portion with lean concrete 1:5:10 type E2.
-
-
-
(g) After completing plumbing work in the toilet/WC/Bath/Kitchen floor, tiling work (floor and dado) can be carried out using suitable Tile Adhesives and ready to make tile grouts of approved makes such as Dr Fixit, FOSROC SIKA, MC BUCHEMIE, ROFF, etc.
-
-
-
Taking down copper/ aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc; complete all as specified and directed.
1839
-
-
M&L Point wiring on surface of wall (open( type using two runs of .5 sqmm single core multistranded copper conductor FRLSH cable of PVC insulated and unsheathed type for phase and neutral alongwith one 1.5 sqmm PVC insulated unsheathed single core multistranded copper conductor FRLSH cable for continuous earthing in & including PVC casing and capping and all accessories required having ISI marked, PVC boxes (upto 12 module suitable including white plates with frame upto 12 module) for fixing switches, sockets , regulators etc., earth conductor connected to common earth and connected to earth dolly for the following; ; complete all as specified and directed.
NOTE: (a) Proper colour coding to be followed for wiring (R, Y, & B - Phase, Black-Neutral & G- Earthing)
(b) All points shall be earthed upto fixtures i.e. holders, tube lights, wall lights, ceiling lights, bulk head lights, building security light etc.
-
-
-
(a) For one light point controlled ob one switch 5 Amp single pole one way.
1013
-
-
(b) For one fan point controlled by one switch 5 Amp single pole one way.
341
-
-
(c) For one 3 pin socket outlet on same board controlled by one , one way 5 amps switch.
145
-
-
(c) For one 5/3 pin socket outlet on independent board controlled by one , one way 5 amps switch.
433
-
-
(d) For one light point controlled by two switches 5 Amp single pole one way.
6
-
-
(e) For one 3/5 pin switch socket 15/16 Amp outlet on independent board but using 2.5 sq.mm copper cables for all the three phases and for neutral .
81
-
-
S&F Modular Switch 5/6 Amp one way 240 volts one Module white/ivory finish complete all as specified and directed.
1932
-
-
S&F Modular Switch 5/6 Amp two way 240 volts one Module white/ivory finish complete all as specified and directed.
12
-
-
S&F Modular Switch 15/16 Amp one way 240/415 volts one Module white/ivory finish complete all as specified and directed.
81
-
-
S&F Modular socket outlet, 2/3 pin 5/6 Amp combined multipurpose two Module white/ivory finish complete all as specified and directed.
578
-
-
S&F Modular socket outlet, 3 pin 5 Amp and 3 pine 15/16 Amp combined multipurpose two Module white/ivory finish complete all as specified and directed.
81
-
-
S&F Modular step fan regulator 120 Watt two Module white/ivory finish complete all as specified and directed.
264
-
-
S&F Ceiling rose surface type 65 X 50mm, isolated body with 3 terminals to be fixed on and including PVC block of suitable size; complete all as specified and directed.
1145
-
-
S&F Lamp holder (Angular / Straight), PVC/Polycarbonate type with back plate suitable for batten fittings, complete as specified.
215
-
-
S&F in replacement Sheet metal enclosure Distribution board, , double door, factory made, fixed flush with wall inside the nitches, protection class IP 42, suitable for mounting MCBs etc., confirming as per IEC 61439-3, with and including 200 Amp rated copper bus bars with neutral bar, earth bar and cable ties for cable management , fully shrouded neutral bar, prefitted masking sheet, consumer unit, complete all as specified and directed for of following capacity and type.
-
-
-
Vertical DB 6 way TPN 415 volts.
2
-
-
DB 4 way TPN 415 volts.
7
-
-
DB 8 way SPN 240 volts.
42
-
-
S&F MCCB AC 415 V, 16 KA 'C' curve series and current carrying capacity 100 Amp complete including making connection with suitable size copper lugs, testing and commissioning complete all as specified and directed.
2
-
-
S&F MCCB TPN 415 V, 16 KA 'C' curve series and current carrying capacity 40 Amp complete including making connection with suitable size copper lugs, testing and commissioning complete all as specified and directed.
7
-
-
S&F MCCB TP AC 415 V, 16 KA 'C' curve series and current carrying capacity 63 Amp complete including making connection with suitable size copper lugs, testing and commissioning complete all as specified and directed.
12
-
-
S&F MCB SP 240 V, 16 KA 'C' curve series and current carrying capacity 06 to 40 Amp complete including making connection with suitable size copper lugs, testing and commissioning complete all as specified and directed.
252
-
-
S&F MCB SPN 240 V, 16 KA 'C' curve series and current carrying capacity 40 Amp complete including making connection with suitable size copper lugs, testing and commissioning complete all as specified and directed.
84
-
-
M&L Sub main wiring three phase with 4 runs of 10 sqmm for Phases and 01 run of 10 sqmm for neutral PVC insulated unsheathed single core multistranded copper conductor cable FRLSH drawn through & including PVC rigid conduit and all accessories required totally concealed in walls including cutting chases and making good disturbed surfaces in cement mortar and finished to match with existing surfaces and earth wire connected to earth dolly etc. complete all as specified and directed.. NOTE : The scope of work and rate quoted shall be inclusive of the following:-
(i) Proper colour coding shall be followed for wiring (Red, yellow, blue - Phase, Green - Earth and Black- Neutral)
(ii) 3 runs of 10 sqmm cable for phases, one run of 10 sqmm cable for earthing and one 01 run of 10 sqmm cable for neutral and one run of PVC conduit shall be measured as one unit length.
90
-
-
M&L Sub main wiring with 3 runs of 6 sqmm for Phases and 01 run of 6 sqmm for neutral PVC insulated unsheathed single core multistranded copper conductor cable FRLSH drawn through & including PVC capping and capping and all accessories required and earth wire connected to earth dolly etc. complete all as specified and directed.. NOTE : The scope of work and rate quoted shall be inclusive of the following:-
(i) Proper colour coding shall be followed for wiring (Red, yellow, blue - Phase, Green - Earth and Black- Neutral)
(ii) 2 runs of 6 sqmm cable for phases, one run of 6 sqmm cable for earthing and one 01 run of 6 sqmm cable for neutral and one run of PVC casing and capping shall be measured as one unit length.
2370
-
-
S&F Industrial type ultra slim square profile LED lighting fixture, environmental friendly, energy efficient ready to use pack LED Tube light fitting 20 Watt with LED light source 6500k with uniform light output, with all accessories including its connection with 3 core sheathed copper conductor cable of size 0.5 sqmm with complete with all as specified and directed.
660
-
-
S&F Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate , environmental friendly, energy efficient ready to use pack LED Tube light fitting 10 Watt with LED light source 6500k with uniform light output, with all accessories including its connection with 3 core sheathed copper conductor cable of size 0.5 sqmm with complete with all as specified and directed.
114
-
-
S&F in replacement Security light fitting of building with single piece new generation, energy saving and environmental friendly long life LED 30 W, made up of pressure die cast aluminium housing with mild power LED as lighting source and PC cover having top opening separate driver compartment with IP 65 protection and impact resistance of IK07 including fixing on walls using one bracket made of Light grade GI Pipe 25 mm dia 1.5 mtr long with two clamps made out of MS FI 4 0 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm copper cable all as directed and as specified.
28
-
-
S&F Garden light LED 9 Watt bollard with opal acrylic diffuser and IP 66 protection including all fixing accessories including connecting up with and including twin core twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz etc. complete all as directed.
24
-
-
S&F 12 Watt round surface LED light, surface mounted rimless round down light, moulded in engineering plastic, it offers best in class high lumen output & wider distribution including all fixing accessories including twin core twisted flexible copper conductor cable of suitable size of 230 V, 50 Hz etc. all as directed and as specified.
2
-
-
M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel; connected to earthing test point all as specified or indicated, connected to main switch board or any other electrical equipment all as shown in electrical plate No -3 of SSR-2009 Part-I; including necessary excavation and earth work in any type of soil, 20mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4) type B-1, reinforced with 6 mm dia MS round bars @ 15cm c/c both way for cover and MS frame etc. including testing on completion; complete all as specified and directed. NOTE : The unit rate includes earth lead and 15mm medium grade GI protection pipe maximum upto 7.5 Metre from earth plate to earth point/test point.
4
-
-
M&L Earth continuity conductor or main earthing lead 4 mm dia galvanised iron or steel wire; fixed to wall on batten or recess or in chases or buried in ground / floor or drawn in conduit pipe or fixed to poles or any other indicated situation for loop earthing etc. as required.
40
-
-
S&F Exhaust fan made of sturdy engineering plastic complete with louvers shutter 230 volt 50 HZ RPM 1200 copper winding of sweep 200 mm and fixing the exhaust fan in the space provided in window shutters of toilets & bathrooms including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to exhaust fan all as specified and as directed.
68
-
-
S&F Exhaust fan metal body exhaust fan 450 mm sweep, 1400 RPM single phase light, one number of speed set, fixing by means of rugged bolts, nuts and washers etc on round hole cut in wall, including three core copper conductor flexible cord of 0.5 sqmm cross sectional area of required length from ceiling rose to porcelain connector block of exhaust fan suitable on working AC,SP 230 v electric supply complete all as specified and directed..
4
-
-
Supply, installing, connecting, testing and commissioning of electric water heater storage type capacity 25 Litres BEE 5 star rated with precaliberated thermostat, safety valve, preset thermal cut out, fire retardant power cord, ABS outer body, colour changing indicator, copper heating element with rated voltage 2 KW, 230 volt, 50 Hz of temperature range 35 to 75 degree Celsius, horizontal or vertical type with ISI certification mark, installing on wall with suitable size bolts, nuts, etc and connecting up with water and electric connections including hot and cold connection pipes complete all as specified and as directed.
24
-
-
Supply and fixing ceiling fan complete with fan blades, down rods. electronic regulator and accessories , 230 Volts 1200 mm sweep, minimum air delivery 210 CFM with service value 6.00 BEE five star rated with brushless direct current motor ( BLDC) ,complete all as specified and directed.
210
-
-
Taking down existing ceiling fans 1200 mm sweep from any position, of any make etc. and depositing to E/M store yard, all a specified and directed.
210
-
-
Taking down existing Geyser of capacity 25 litres from any position, of any make etc. and depositing to E/M store yard, all a specified and directed.
1.4
-
-
Taking down existing ceiling fans 1200 mm sweep from any position, of any make etc. and refixing at the desired location after servicing / overhauling by throughly cleaning the shaft, rotor, motor and appying lubricant / grease to bearing and one coat of super enamelled varnish over winding to improve the insulation resistance including repairs/ replacement of spare parts / material / items, making connection by replacing PVC insulated cable of copper conductor of size 1.50 sqmm upto 0.50 m length inclding using material / parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc. after cleaning the metal surfaces including painitng with spray painting to required gloss with white enamelled paint to complete body of fan including blades and writting MES number with black paint etc. to make it functional; complate all as specified and directed.
54
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%