Military Engineer Services Tender
... More
Search from over 12139+ business opportunities that have been announced from the biggest Mahatenders, e tender Maharashtra, Maharashtra government tenders, and the Online Tender Notices posted on Maharashtra e tenders till date. Find opportunities that have come in from the multiple corporations, Maharashtra government departments, State PSUs, and Private companies from the state.
Military Engineer Services - MES Tender
Civil And Construction
Building Construction
Eprocure
Opening Date7 Mar 2025
Closing Date4 Apr 2025
Tender Amount₹ 72,68,000
Costs
EMD
₹ 1,34,000Document Cost
₹ 1,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_MES_700647_1Tender No
84420-K/E8Tender Authority
Military Engineer Services ViewPurchaser Address
-Website
http://http://mes.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engr-in-Charge.
36
-
-
... More
Material and Labour for brick work with sub class 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed by Engr-in-Charge.
36
-
-
... More
Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 sqm on plan and not exc1.5 m in depth and getting out in soft/loose soil, complete all as specified and directed by Engr-in-Charge.
16
-
-
... More
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil, complete all as specified and directed by Engr-in-Charge.
5
-
-
... More
Removing excavated material not exc 50 m and depositing where directed at a level not exc 1.5 m above the starting point for soils, complete all as specified and directed by Engr-in-Charge.
11
-
-
... More
Material and Labour for PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in foundation filing and mass concrete, complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Dismantling floor hearth or wall (ceramic/mosaic) tiling including cement mortar bedding (but not backing) and rubbish off the premises, complete all as specified and directed by Engr-in-Charge.
447
-
-
... More
Material and Labour for Vitrified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick screed bed in CM 1:4 to receive tiles, complete all as specified and directed by Engr-in-Charge.
97
-
-
... More
Material and Labour for Vitrified Ceramic tiles (dark shade) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 10mm thick backing coat in CM 1:4 to receive tiles, complete all as specified and directed by Engr-in-Charge.
5
-
-
... More
Material and Labour for Coloured Glazed Ceramic tiles in vertical surfaces 350x250mmx7mm / 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick backing coat in CM(1:4) on fair face of brick or concrete surface, complete all as specified and directed by Engr-in-Charge.
200
-
-
... More
Material and Labour for Coloured Non Skid Ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement mixed with pigment match the colour of tiles with and including 20mm thick screed bed in CM 1:4, complete all as specified and directed by Engr-in-Charge.
5
-
-
... More
Material and Labour for Coloured Non Skid Ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:4), complete all as specified and directed by Engr-in-Charge.
340
-
-
... More
Material and Labour for Coloured Non Skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match Over 15mm screed bed in CM 1:6, complete all as specified and directed by Engr-in-Charge.
100
-
-
... More
Roughening surfaces of old concrete floors by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and directed by Engr-in-Charge.
400
-
-
... More
Brushing neat cement slurry with 3 kg of cement per sqm, complete all as specified and directed by Engr-in-Charge.
400
-
-
... More
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons, cills etc. laid bedded & pointed in any mortar, complete all as specified and directed by Engr-in-Charge.
30
-
-
... More
Material and Labour for Machine cut Kota stone slab 20-25 mm thick as in flooring, laid over and including 20 mm thick screed bed in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab including rubbing, polishing and provided groves at the edge of step, complete all as specified and directed by Engr-in-Charge.
254
-
-
... More
Material and Labour for Machine cut Kota stone slab 20-25 mm thick in riser of steps, skirting, dado, and pillar etc., laid over and including 10 mm thick backing coat in CM 1:3 set and jointed in neat cement slurry and pointed with cement and pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified and directed by Engr-in-Charge.
117
-
-
... More
Material and Labour for Green marble 18-20 mm thick as in (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platform and like in CM 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match including 20 mm thick screed/backing coat in CM 1:3, complete all as specified and directed by Engr-in-Charge.
15
-
-
... More
Material and Labour for Granite (of any type) tiles 20mm thick as in floors and similar works over 20mm thick cement screed in CM 1:3, machine cut, bedded and jointed with grey cement slurry and pointed with white cement and pigment to match the shade of granite stone including cutting, polishing, complete all as specified and directed by Engr-in-Charge.
11
-
-
... More
Material and Labour for Machine cut cudappah stone slab 20-25mm thick over 20mm thick cement screed in CM 1:3, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed by Engr-in-Charge.
7
-
-
... More
Material and Labour for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other glazed similar situations, complete all as specified and directed by Engr-in-Charge.
38
-
-
... More
Material and Labour for Boring holes through stone/tile lining for pipes, etc. not exc 50 mm dia and making good, complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
Material and Labour for exterior grade fibre reinforced heavy duty cement concrete designer tiles 23+2mm thick layer colour pigment as per 15 1237-1980 (Reaffirmed in 2006) design as CHITRA type (samples approved by Engr-in-Charge) over and including 20mm thick screed bed in CM 1:3, complete all as specified and directed by Engr-in-Charge.
54
-
-
... More
Taking down chowkats or frames including shutter (without taking off shutters from the frame) area not exc. 1.5 Sqm each, complete all as specified and directed by Engr-in-Charge.
90
-
-
... More
All as per item above but exc 1.50 Sqm and not exc 4 Sqm.
11
-
-
... More
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and refixing in same opening, complete all as specified and directed by Engr-in-Charge.
80
-
-
... More
Taking down shutters of any description exc 1 sqm and not exc 2 sqm each, complete all as specified and directed by Engr-in-Charge.
16
-
-
... More
Supply & Fixing solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and edges will be painted to match will printed sheet fixed in opening as per specification & drawings, complete all as specified and directed by Engr-in-Charge.
80
-
-
... More
Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of mild steel tube top & bottom rail mild steel frame shall be covered with heat moulded plain colour PVC “C” channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the mild steel frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying & fixing in the frame at site as per specification and drawing, complete all as specified and directed by Engr-in-Charge.
22
-
-
... More
Supply and Fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded wood grain printed PVC sheet used 5mm thick x 15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (90°) used instead of exposed portion of PVC sheet beading panelling of wood grain printed PVC sheets to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying & fixing in the frame at the site as per specification and drawing shown in SSR Pt-I, complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Supply and Fix 35mm thick plain, framed, factory made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial veneering particle board on both faces. The size of rail and stile as per IS : 1003(Part-1), kiln in seasoned and chemically pressure treated, complete all as specified and directed by Engr-in-Charge.
11
-
-
... More
Supply and Fix 35mm thick 2nd class Hardwood glazed and skeleton shutters open rebated and prepared to receive glass / gauge (without sash bar) edges of forming plain chamfered or rounded fitted with cut and mitred bead for securing glass / gauge etc size of shutter as per SSR part-1 section 8 clause 8.24(a), complete all as specified and directed by Engr-in-Charge.
9
-
-
... More
Supply and Fix 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides face is covered with decorative face veneer with lipping/frame to match, complete all as specified and directed by Engr-in-Charge.
4
-
-
... More
Supply and Fix SS butt hinges100mm long medium weight, cold rolled, complete all as specified and directed by Engr-in-Charge.
45
-
-
... More
Supply and Fix butt hinges size 100mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed C-21, complete all as specified and directed by Engr-in-Charge.
24
-
-
... More
Supply and Fix 150 mm long extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed by Engr-in-Charge.
30
-
-
... More
Supply and Fix 125mm long Extruded aluminium alloy handles, fabricated type, complete all as specified and directed by Engr-in-Charge.
21
-
-
... More
Supply and Fix 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple bolt type and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy, complete all as specified and directed by Engr-in-Charge.
12
-
-
... More
Supply and Fix Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed, complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix 150mm Brass handles, cast type, polished bright, complete all as specified and directed by Engr-in-Charge.
4
-
-
... More
Supply and Fix 200 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed, complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix 200mm long Aluminium, anodized barrel tower bolts of extruded section and fixed, complete all as specified and directed by Engr-in-Charge.
22
-
-
... More
Supply and Fix 150mm long Aluminium, anodized barrel tower bolts of extruded section, complete all as specified and directed by Engr-in-Charge.
29
-
-
... More
Supply and Fix in repair Aluminium extruded section Door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 850 to 1000mm in width and of weight between 61 to 80 kg, complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix in repair 150mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed in floor complete all as specified and directed by Engineer in Charge.
71
-
-
... More
Supply and Fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm(double rebat) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.
20.5
-
-
... More
Supply and Fix Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately).
8
-
-
... More
Supply and Fix 150mm long and 12mm dia stainless steel fasteners with round shape head, complete all as specified and directed by Engr-in-Charge.
24
-
-
... More
Supply and Fix Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.
458
-
-
... More
Supply and Fix Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, star lock, rubber beading all complete as per architectural drawings and the directions of Engineer-in-Charge.
371
-
-
... More
Supply and Fix aluminium anodised grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC15) of approved design/pattern(DG 104), with approved standard section and fixed to existing window frame with CP brass/stainless steel screw @ 200mm c/c, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engr-in-charge.
197
-
-
... More
Material and Labour for silicon gun paste around windows of any size and any height of the building by using scaffolding/security equipment etc, complete all as specified and directed by Engr-in-Charge.
72
-
-
... More
Supply and Fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples, complete all as specified and directed by Engr-in-Charge.
41
-
-
... More
Supply and Fix Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples as in repairs, complete all as specified and directed by Engr-in-Charge.
17
-
-
... More
Supply and Fix 4 mm thick sheet glass ordinary quality and glazing complete in square not exc 0.50sqm each, complete all as specified and directed by Engr-in-Charge.
29
-
-
... More
Supply and Fix 4 mm thick sheet glass ordinary quality and glazing complete in square exc 0.50sqm each, complete all as specified and directed by Engr-in-Charge.
44
-
-
... More
Supply and Fix 4mm thick frosted glass, ordinary quality and glazing with oil putty of any size pane, complete all as specified and directed by Engr-in-Charge.
12
-
-
... More
Supply and Fix aluminium louvers with levers and locking arrangements suitable for fixing 100mm wide 4 to 6 Nos frosted glass, complete all as specified and directed by Engr-in-Charge.
32
-
-
... More
Petty repair to wooden panelled/skeleton door, cupboard door, windows etc with minor repair, cutting, erasing and alignment to openable with accessories if required any ( like roller of cupboard door ,butt hinge ,handle, tower bolt, bearing, beading, bow handle etc complete) (including taking and refixing the same position), complete all as specified and directed by Engr-in-Charge.
55
-
-
... More
Petty Repair to any type any size of balcony grill of any height including hand rail with cover of PVC including welding, dismantling ,fixing in cement concrete in 1:2:4 and matching to existing surfaces complete using 16/20 mm square/round bar including painting, complete all as specified and directed by Engr-in-Charge.
11
-
-
... More
Supply and Fix in repairs aluminium curtain rod with fixing brackets fixed with steel screws & PVC rawl plugs/ grips as required, complete all as specified and directed by Engr-in-Charge.
111
-
-
... More
Material and Labour for Preparation of new wooden surfaces over 10cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed by Engr-in-Charge.
80
-
-
... More
Material and Labour for preparation of old wooden surfaces of any description, not otherwise described, exceeding 10cm in width or girth and applying one coat of synthetic enamel paint on wooden surfaces, complete all as specified and directed by Engr-in-Charge.
225
-
-
... More
Supply and Fix Collapsible steel gates, top hung consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and directed by Engr-in-Charge.
4
-
-
... More
Supply and Fix in repair venetian blinds for windows/ door/ ventilator of any colour and pattern as approved including all connected items like rod hook, locking system fixed to the existing windows/ventilator, complete all as specified and directed by Engr-in-Charge.
Note: Design and colour will be approved by Engineer In Charge.
20
-
-
... More
Supply and Fix 1mm thick Steel rolling shutters, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, complete all as specified and directed by Engr-in-Charge.
35
-
-
... More
Supply and Fix Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. not exc 10 kg each brackets, conforming to Fe-290 Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel'), complete all as specified and directed by Engr-in-Charge.
150
-
-
... More
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed by Engr-in-Charge.
24
-
-
... More
Material and Labour for framed work as in doors or gates of angle or other section with gusset plates, braces etc complete drilled for fixing of steel sheeting or other covering. Doors to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete conforming to Fe 410-w(Gde-E-250 quality), complete all as specified and directed by Engr-in-Charge.
2429
-
-
... More
Taking down roof trusses, coupled rafters or trussed beams, all as specified and directed by Engr-in-Charge.
6
-
-
... More
Material and Labour for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161 1979 grade St.-240 complete all as specified and directed by Engr-in-charge.
1000
-
-
... More
Material and Labour for preparation of new surfaces of steel or iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-Charge.
75
-
-
... More
Material and Labour for preparation of old painted steel and iron surfaces of any description exceeding 10 cm in width or girth and applying one finishing coat of synthetic enamel paint on steel surfaces, complete all as specified and directed by Engr-in-Charge.
40
-
-
... More
Material and Labour for two coats of aluminium paint over a coat of synthetic enamel paint on new steel surface, complete all as specified and directed by Engr-in-Charge.
32
-
-
... More
Material and Labour for Hardcore of broken stone or boulders not exc 63mm deposited, spread and levelled in layers not exc 15cm thick watered and rammed to a true surface, complete all as specified and directed by Engr-in-Charge.
17
-
-
... More
Material and labour for 20mm thick rendering in cement mortar 1:4 on external surface of brick wall or concrete surfaces, complete all as specified and directed by Engr-in-Charge.
450
-
-
... More
Dismantling wall and ceiling boards (fibers pulp insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets, complete all as specified and directed by Engr-in-Charge.
255
-
-
... More
Supply and Fix Anodised aluminium size 605 x 605 mm snap grid frame work for false ceiling, complete all as specified and directed by Engr-in-Charge.
255
-
-
... More
Supply and Fix Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed by Engr-in-Charge.
255
-
-
... More
Supply and Fix 10mm thick without relevant PVC insulation panels with EPS stuck to 1mm printed PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and drawing, all as specified and directed by Engr-in-Charge.
255
-
-
... More
Demolition of cement concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge.
24
-
-
... More
Material and Labour for 100 mm thick, Cement concrete 1:2:4, type B2 using 40 mm graded stone aggregate as in pavings, hardstandings and similar work, complete all as specified and directed by Engr-in-Charge.
120
-
-
... More
Material and Labour for PCC (1:3:6) type C-2 using 40mm graded agg as in 75mm thick as in plinth protection / footpath. finished even & smooth using extra cement complete all as specified and directed by Engr-in-Charge.
100
-
-
... More
Material and Labour for 40mm thick, PCC 1:3:6, type C-2 using 20mm graded stone agg finished even and smooth without using extra cement as in sub base, complete all as specified and directed by Engr-in-Charge.
20
-
-
... More
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc, complete all as specified and directed by Engr-in-Charge.
1801
-
-
... More
Material and Labour for 20mm thick polymer modified ready mix cement based plaster on external surfaces complete all as specified and as directed by Engr-in-Charge.
396
-
-
... More
Material and labour for 12mm thick polymer modified ready mix cement based plaster on internal surface of brick wall or concrete surfaces, complete all as specified and directed by Engr-in-Charge.
824
-
-
... More
Material and labour for 5mm thick polymer modified ready mix cement based plaster on ceiling surface, complete all as specified and directed by Engr-in-Charge.
231
-
-
... More
Material and Labour for Preparation of old plastered surfaces including removal of existing treatment and applying two coats of oil emulsion distemper on walls, complete all as specified and directed by Engr-in-Charge.
700
-
-
... More
Material and Labour for Preparation of old plastered surfaces and applying three coats of white wash on ceilings including removal of existing treatment, complete all as specified and directed by Engr-in-Charge.
125
-
-
... More
Material and Labour for preparation of old distempered surfaces of walls including washing, rubbing down and stopping of nail holes and applying one coat of oil bound distemper (oil emulsion) on walls, complete all as specified and directed by Engr-in-Charge.
1173
-
-
... More
Material and Labour for preparation of old surfaces of ceilings including cornices, etc and applying one coat of white wash, complete all as specified and directed by Engr-in-Charge.
256
-
-
... More
Material and Labour for Preparation of new plastered surfaces and applying two coats of oil emulsion distemper on walls over a coat of chalk whiting primer, complete all as specified and directed by Engr-in-Charge.
744
-
-
... More
Material and Labour for Preparation of new plastered surfaces and applying three coats of white wash on ceilings, complete all as specified and directed by Engr-in-Charge.
231
-
-
... More
Material and Labour for providing and applying wall care putty of 2mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed by Engr-in-Charge.
2079
-
-
... More
Material and Labour for Providing and applying plaster of Paris putty of 1mm thickness over plastered surface to prepare the surface even and smooth, complete all as specified and directed by Engr-in-Charge.
560
-
-
... More
Supply only integral water proofing compound.
55
-
-
... More
Taking up or down 15mm dia GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified..
75
-
-
... More
Taking up or down 20mm dia GI Tubing and connection including, cleaning for refixing or removal to store complete all as specified..
100
-
-
... More
Taking up or down 25 mm dia GI Tubing and connection including, cleaning for refixing or removal to store, complete all as specified and directed by Engr-in-Charge.
75
-
-
... More
Supplying and fixing of 20mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with al fittings to walls with hooks, ceiling or laid on floor and including concealed pipe lines complete all as specified and directed by Engineer in Charge.
125
-
-
... More
Supplying and fixing of 25mm bore dia CPVC pipes SDR 11 & Plain CPVC SDR 11 with all fittings to walls with hooks, ceiling or laid on floor and including concealed pipe lines complete all as specified and directed by Engineer in Charge.
125
-
-
... More
Supply and Fix in repairs 25mm bore stop valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed by Engineer in Charge.
4
-
-
... More
Supply and Fix in repair 15mm bore stop valve, cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends, complete all as specified and directed by Engr-in-Charge.
26
-
-
... More
Supply and Fix in repair 20mm bore stop valve cast copper alloy with handle screwed both ends for GI out let/inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed by Engineer in Charge.
2
-
-
... More
Supply and Fix Vitreous China urinals, half stall, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe fixing supply pipe to flushing cistern, trap and waste pipe including spreader, complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
Supply and Fix 10 litre capacity PVC flushing tank,, syphonic action type, flushing cistern, low level/high level, white, with inlet, ball valve, PVC flush pipe, float and handle including brackets and waste pipe 32mm dia, complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Supply and Fix in repairs vitreous china wash down water closet pan pedestal pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes, connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia with mild steel chromium plated hinging and 'P' or 'S' trap device, complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
Supply and Fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect, all as specified and directed by Engr-in-Charge.
3
-
-
... More
Material and Labour in repairs CI Floor trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4, complete all as specified and directed by Engr-in-Charge.
5
-
-
... More
Material and Labour in repairs CI Nahani trap long neck 100 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete type B1, 1:2:4, complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
Supply and Fix in repair 15mm bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge.
9
-
-
... More
Supply and Fix 15mm bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed by Engr-in-Charge.
12
-
-
... More
Supply and fix in repair chromium plated brass Bib cock two way suitable for 15mm bore GI tubing and health faucet, complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix in repairs 15 mm bore Pillar taps, fancy type, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed by Engr-in-Charge.
7
-
-
... More
Supply and Fix in repair 15mm angle cock with flange fancy type, chromium plated, screwed both ends for iron pipe or for union complete all as specified and directed by Engineer in Charge.
14
-
-
... More
Supply and Fix in repair Wash hand basin flat back 550x400mm vitreous china (white) with cantilever CI/Angle iron brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, Waste pipe PVC 32mm bore, complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Supply and Fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in fixed to walls, complete all as specified and directed by Engr-in-Charge.
25
-
-
... More
Supply and Fix 110mm bore PVC (SWR) bends any radius, complete all as specified and directed by Engr-in-Charge.
8
-
-
... More
Supply and Fix 110mm bore PVC (SWR) junction single, (single T) equal or unequal any radius, complete all as specified and directed by Engr-in-Charge.
4
-
-
... More
Supply and Fix 110mm bore PVC (SWR) junction double, (double T) equal or unequal any radius, complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Supply and Fix 110mm bore PVC (SWR) cowl any radius, complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix PVC (SWR) pipe inner dia 75mm single socketed in any length with rubber ring joint laid on wall/ceiling or laying in floors, complete all as specified and directed by Engr-in-Charge.
7
-
-
... More
Supply and Fix for 75 mm dia PVC (SWR ) bends and radius, complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Supply and Fix in repair Toilet paper holder of chromium plated fixed to walls with chromium plated (CP) brass screws, complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix Chromium plated Soap dish, including fixing arrangement complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix 40mm bore unplasticised PVC pipe of pressure rating 10 kg/Sqcm fixed complete to walls, ceiling or laid in floors, complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix in repair PVC connections 15 mm size with brass nuts both side of length 450 mm, complete all as specified and directed by Engr-in-Charge.
20
-
-
... More
Supply and Fix in repairs brass chromium plated overhead shower 125mm size( square/rectangular) with or without swivel joints including fixing to steel pipe of 15mm bore, complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms), complete all as specified and directed by Engr-in-Charge.
2
-
-
... More
Supply and Fix 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer in Charge.
15
-
-
... More
Material and Labour for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as specified and directed by Engr-in-Charge.
14
-
-
... More
Supply and Fix brass chromium plated towel rail 20mm dia, D type, 60cm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed by Engineer in Charge.
15
-
-
... More
Supply and Fix in repair 32 mm dia bottle trap of chromium plated for wash hand basin with inlet and out let pipe connection including necessary fitting, complete all as specified and directed by Engr-in-Charge.
4
-
-
... More
Dismantling HDPE water storage tanks of capacity exc 500 & not exc 1000 litres at any level/locations/positions duly disconnecting from water supply lines including all necessary staging etc. as required and removing all as specified and as directed.
3
-
-
... More
Supply, hoisting and fixing of rotational moulded polyethylene water storage tanks 1000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including connecting the overflow drain out, inlet and out pipes, tank nipple, elbow, bend, unions, sockets, float valve, gate valve etc, complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and directed by Engr-in-Charge.
17
-
-
... More
Complete removal of existing water proofing treatment of any description and in any position including PCC padding any thickness and cleaning, wire brushing, watering & removal of debris outside, complete all as specified and directed by Engr-in-Charge.
Note :- Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work.
100
-
-
... More
Material and Labour for Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight), complete all as specified and directed by Engr-in-Charge.
100
-
-
... More
Material and Labour for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in concrete padding laid to required slope including finishing the concrete surface fair and even without using extra cement, complete all as specified and directed by Engr-in-Charge.
10
-
-
... More
Material and Labour for 10 mm thick screed bed or bedding layer of mortar in cement mortar (1:4) for laying roof finish as padding finished with WPC 3% by weight of total cement, complete all as specified and directed by Engr-in-Charge.
Note :- Integral WPC shall be measured and paid separately.
100
-
-
... More
Material and Labour for applying oil bound bitumen primer @ 0.40 Litre / Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg / Litre at 25 degree Celsius on the prepared dry roof surface, complete all as specified and directed by Engr-in-Charge.
100
-
-
... More
Material and Labour for APP polymeric membrane minimum weight 3.5kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric(weight not less than 150 gms/sqm laid on primed surfaces by torch application method, complete all as specified and directed by Engr-in-Charge.
100
-
-
... More
Material and Labour for preparation of new surfaces of any description not otherwise described over 10cm width or girth and applying one coats of solar reflective aluminium paint @ 0.10 kg/sqm membrane surfaces, complete all as specified and directed by Engr-in-Charge.
100
-
-
... More
Supply and Fix Grating square/rectangular 150mm size of PTMT (Minimum weight 100gms), complete all as specified and directed by Engr-in-Charge.
8
-
-
... More
Material and Labour for Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, hold fast, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weathering’s, throttling etc. and setting in CM(1:4) with joints to match, complete all as specified and directed by Engr-in-Charge.
1
-
-
... More
Material and Labour for Cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge.
3
-
-
... More
Removing, chipping and cleaning of existing loose and damaged concrete carefully by low impact high frequency hammer or by manual chipping without damaging the existing concrete including cleaning the surface by air jet and stacking and disposal of unserviceable materials outside the premises. Applying Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in two coats to the entire circumference surface of bars, providing, mixing and applying two component epoxy resin concrete bonding coat on prepared RCC surfaces prior to application of any type of repair mortar or microconcrete as per manufacturer's specification including cleaning of surface to remove all dirt, dust or any other impurities and providing/ applying jacketing around columns with Micro concrete (Molith-MC) M30 including all lifts, shuttering, drilling holes and fixing shear anchor as per specification, complete all as specified and directed by Engr-in-Charge. Notes : (i) Rate included for any height of bldg.
(ii) Rates including jacketing, formwork all as per manufacturer's instruction and as directed by Engr-in-Charge.
1
-
-
... More
Material and Labour for injecting chemical GLYPHOSPHATE (4% Concentration) of 20 ml or till refusal by making cut / injection in the stem of plant of roots at 30 mm and spraying with solution 25 ml GLYPHOSPHATE (4% concentration diluted with 1 litre of water) and removing the Plant / vegetation of following girth including penetrated roots complete including necessary scaffolding etc for plants / vegetation of size 0-20 cm girth for buildings upto and including 4 storeys, complete all as specified and directed by Engr-in-Charge.
30
-
-
... More
Material and Labour for new or old surfaces of exterior wall decorating and water proofing treatment to wall surface by wire brushing in order to remove dust, dirt, loose particles, laitance. Thereafter wash the surface with clan water & allow to dry. Fill visible cracks/ joints by chemistic or equivalent crack seal caulking compound & allow to dry for 24 hours. Apply a primer coat of chemistic prime M Seal (water base primer) and allow to dry for 6 hours. Thereafter apply 02 coats of chemistik PDS-50 (WB high build anti carbonating coating cum waterproofing) & shade by brush at the interval of 08 hours between the coat and allow to dry to match the existing shade including necessary scaffolding for any height, covering etc, complete all as specified and directed by Engr-in-Charge.
Notes :- (i) The surface cracks to be filled with fiber reinforced crack filler for upto 3 mm cracks and bigger cracks should be filled with polymer modified cement. Surface should be free from any loose paint, dust, or grease.
(ii) Rate included for any height of building.
1605
-
-
... More
Chipping , removing carefully concrete work by low impact hammer, breaker without damaging the structure & cleaning and disposal of debris out side the premises etc, complete all as specified and directed by Engr-in-Charge. (Hard concrete should not be removed by force).
150
-
-
... More
Material and Labour for carrying out application of ‘Bi-polar migratory corrosion inhibitor' EPCO-KP-100 on concrete surface, complete all as specified and directed by Engr-in-Charge. This inhibitor has migratory kind of property which permits the material to migrate to a virtual extent of 100 mm, through pores of concrete, inhibiting the corrosion and de-passivating the Electro-chemical reaction. It has property to attack anode as well as cathode, which is purely alkaline in nature (pH-9.5), so it has no carcinogen activity with concrete.
150
-
-
... More
Material and Labour for Cleaning existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Pidilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry, complete all as specified and directed by Engr-in-Charge.
35
-
-
... More
Material and Labour for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes, complete all as specified and directed by Engr-in-Charge. Works shall be carried out as under :- (i) Cleaning of holes : Clean the holes by air blower prior to fixing nozzles.
(ii) Fixing of nozzles : Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun. Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles : Cut the nozzles by chisel after completion of grouting without damaging structural elements.
(iv) In case crack upto 2mm wide, fix the injection nozzles directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzles in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty.
(v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the crack with a liberal application of the epoxy putty.
200
-
-
... More
Material and Labour for injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency , Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled, complete all as specified and directed by Engr-in-Charge. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd or equivalent as approved by GE.
200
-
-
... More
Material and Labour for injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, including, Mixing of materials: Mixing of material components (part a&b) in the required quantities as per manufacturer's instruction by weigh batching. Grouting: Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100. Maintain desired pressure in the gun by air compressor; maintain the pressure at exit (2 to 3kg/cm2) by monitoring pressure gauge at exit. Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles, complete all as specified and directed by Engr-in-Charge.
20
-
-
... More
Material and Labour for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-Charge.
200
-
-
... More
Material and Labour for TMT bars 6-8 mm dia as in stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-Charge.
100
-
-
... More
Material and Labour for anticorrosive Treatment to Reinforcement by application of two coats of IPNET RB (CBRI Know how) by brush on exposed reinforcement with time interval of minimum 4 hours between each coat, complete all as specified and directed by Engr-in-Charge.
30
-
-
... More
Material and Labour for Providing and applying structural grade epoxy-latex bond coat prior to application of any type of mortar confirming to ASTM-C- 882-91 (Arizona Slant Shear Test) to ensure bond between old concrete & new concrete by brush application, complete all as specified and directed by Engr-in-Charge.
200
-
-
... More
Material and Labour for Rebuilding the section of damaged RCC elements (column, beam, chajja, balcony etc) to its original size and thickness (any) by providing and casting with ready to use non shrink, cementitious free flow micro concrete having compressive strength M40 (28 days) according to ASTM C 1107-99 including drilling holes and fixing shear connectors mixing the micro concrete with adequate quantity of water placing, levelling the surface by grinding off cementitious slurry or cementitious joints daffiness if any and curing, complete all as specified and directed by Engr-in-Charge.
Note: Rates including scaffolding, formwork etc, all as per manufacturer's instruction and as directed by the Engineer-in-Charge.
6.2
-
-
... More
Material and Labour for preparation of new surfaces of any description wood, steel, iron, concrete, brick, stone etc., exc 10 cm width or girth and applying two coats of black bituminous paint over a coat of primer, complete all as specified and directed by Engr-in-Charge.
25
-
-
... More
Supply and Fix Switch socket combination 2 in 1, 3 pin, 5 A and 15 Amp flush type universal, complete all as specified and directed by Engr-in-Charge.
12
-
-
... More
Material and Labour for wiring for circuits/sub main wiring with FRLSH PVC insulated sheathed 2 x 4 sqmm stranded copper conductor cable 1100 volts grade heavy duty drawn into concealed PVC conduit with 4 sqmm PVC insulated green copper cable for continuous earth PVC pipe of suitable dia conduit with all accessories, complete all as specified and directed by Engr-in-Charge.
200
-
-
... More
Supply and fix Geyser of capacity 25 litres including angle cock, hot and cold water pipe and 15 amp top and connected accessories, complete all as specified and directed by Engr-in-Charge.
12
-
-
... More
Supply and fix PCRD Plug cap 20 Amp, all as specified and directed by Engr-in-Charge.
12
-
-
... More
Supply and Fix galvanised steel tubes, medium grade of size 15mm dia and including fixing arrangement with tee, elbow, bend etc, complete all as specified and directed by Engr-in-Charge.
150
-
-
... More
Supply and fix metallic exhaust fan of size 300mm, 50Hz, 220V, including round hole and louvers and all connected items, complete all as specified and directed by Engr-in-Charge.
12
-
-
... More
Material and Labour for Point wiring with single core 1100 volts grade 1.5 sqmm size FRLSH PVC insulated sheathed stranded copper conductor cable using colour code drawn through concealed conduit in brick/stone wall & including PVC conduit with all accessories Complete all as specified in and including sunk type pressed steel/CI terminal box with 3mm thick hylam Masonite sheet top cover / PVC Board including 1.5Sq mm FRLSH PVC insulated sheathed copper conductor cable for continuous earth conductor (using green colour) to common earth and connecting to earth dolly for One light /fan/ call bell point controlled by one switch, complete all as specified and directed by Engr-in-Charge.
12
-
-
... More
Supply and fixing switch piano type flush button type single pole one way 5 Amps 240V front operated, complete all as specified and directed by Engr-in-Charge.
12
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%